Where to find the olb and pll directory

hello, im trying to implement something i need to past two files in olb directory and pll directory, im using oracle10g
where can i find those directories.. where are those folders?
please reply asap

Hello,
There is no PLL directories or OLB directories. Just copy these files in one of the folder defined in the FORMS_PATH variable.
Francois

Similar Messages

MVC: Where to find the model and the table select in standard BSP apps?

Hello!
We are going to use MSS with the appraisal-application
which is written in BSP and 'e-recruiting'. Both applications use the MVC-design pattern. We are going to do some modifications, but are struggling a bit since MVC is a new topic for us. How is the best way to get an overview of the controllers and views and call sequences in an existing application? We have done this by debugging, but are there other ways to find the 'starting controller', etc. ?
Where can we find the model-code which reads the table-values into the internal table?
We have read a lot about how nice MVC is - how the design gives you a better overview of the application. But without any docuemtation of the design we are quite lost. What are others experiences on this?
regards Tine

Hi Tine,
let's see if I can answer your questions (at least partially).
The main controller is the one you normally call directly in your browser (or after some introduction pages like login etc.). It's typically called start.do or main.do (but can differ). So if you call in the browser:
http://myhost.domain:4711/sap/bc/bsp/sap/myappl/start.do,
just call se80, choose the application myappl and double-click on start.do. There you can get the name of the controller class (just double-click on the class name).
The standard model class is called CL_BSP_MODEL. The model classes from the application inherit from this class.
For a complete documentation please have a look at the online docu:
http://aiokeh.wdf.sap.corp:1080/SAPIKS2/contentShow.sap?_SCLASS=IWB_STRUCT&_SLOIO=EDBB153AAB4A0C0EE10000000A114084&TMP_IWB_TASK=PREVIEW2&RELEASE=640&LANGUAGE=DE&_SEQNUM=106&_LOIO=0FAB3A3C9CA75402E10000000A114084&_CLASS=IWB_EXTHLP
There are also some weblogs written by Craig Cmehil where you can get examples.
Hoping this helps a little bit.
Regards,
Rainer

(Urgent) Where can find the code and documentations for ATG mobile ?

Hi there,
We have a customer (Gome) which is implementing ATG products and ATG solution needs to support iPhone app as well. Due to the tight schedule, we are looking to have some reference modules to jump start our mobile module development and help us staying on the course of ATG best practices.
Before we can find some open source ATG mobile code available on community.atg.com site as part of ATG program. However they can not find it now because community.atg.com was closed.
Can anyone help on this ?
J.K Liu

The iPhone, Android, and mobile web solutions were previously provided via the ATG Catalyst program. As of the acquisition by Oracle a year ago, those offerings were withdrawn and are no longer available. Oracle has not provided any guidance as to whether they might be made available again, and if so, when and under what licensing guidelines.
I'm afraid that you're on your own. Sorry!

Where can i find the zoom and pinch tool in New Adobe DRAW App

Hi People
Dose anyone know where i can find the zoom and pinch tool in adobe draw?
On adobe ideas it was on the tool bar with the pan icon that looks like a hand and the cross icon for the zoom.
Just wondering if Adobe put it in the new Adobe Draw program, i hope so, its hard to get detail with out the zoom tool.
Best, Phil

Oops Sorry Jumped the gun again! i found out how to do it. I was using my jot touch styles which mean you have to hold down the icon on the upper left with the styles then use your fingers to do the pinch and zoom gesture to make it work

Where could we find the CT and PT values for Particular Device ???

I 'm facing a scenario in a report i need to place a field device number and assosiated CT's and PT's .
where could we find the CT and PT values for Particular Device ??? basically im MM consultant   we don't ahave DM consultant please help with this issue???
means actually i got the table and field details for transformation ratio (or) CT/PT ratio
                      ETYP_UEBERVER. from the screen EG03 , t-code
                        but im not sure   this is the exact field that i require ....
can any one help ....   i will be very thankfull to your solution inadvance....

The transformation ratio are the attributes of a "Winding Group". Find winding group of a device and then you'll get the desired information.

Where do I find the cheapest and most reliable Microsoft office to download onto my new IMac

Where can I find the cheapest and most reliable Microsoft office to download onto my IMac?

https://discussions.apple.com/docs/DOC-6941

I installed a game, where can i find the files and maps? where does iMac store this data?

I installed a game,Now I need to add some files however, I cannot find where iMac stores it.. where can i find the files and maps? where does iMac store this data?
thx alot
erik

Depends on game, i would look first on the game file itself, right click (or ctrl click) the game file you installed (Applications?) and select show package contents, its usually a application bundle, as in basicly a folder where the application and the required files and subfolders are.

HT4250 Does anyone know where to get a copy of the OS X 10.6.5 update? Apples' site says it can't find the page and the only other downloads i've found on the net say you need to have 10.6.5 to install 10.6.5. HUH?

Does anyone know where to get a copy of the OS X 10.6.5 update? Apples' site says it can't find the page and the only other downloads i've found on the net say you need to have 10.6.5 to install 10.6.5. HUH?

It's right here from Apple, at least for me.
Combo http://support.apple.com/kb/DL1324
Delta http://support.apple.com/kb/DL1325
Any reason you want the 10.6.5? You do know that the latest and final is the 10.6.8.

Where is my credit balance? I was gifted $50 for Christmas and used it but cannot find the balance and how to use it.

I was gifted $50 for Christmas and used it ti buy a couple of albums but now canot find the balance and how to use it.

My account's balance shows at the top left of the store's page on my computer's iTunes, and by logging in to view my account via the Store > View Account menu option. On my devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > iTunes & App Store and it should show on the screen that you are taken to).
If nothing shows then have you checked your account's purchase history ? If you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases.
If you have a balance then you just need to click on item's price to buy it, assuming that your balance covers its price.

Where to find the best application for cleaning out my MacBook Air with OS X 10.7.5? I've been using MacKeeper but believe it's slowing down my laptop considerable.

where to find the best application for cleaning out my MacBook Air with OS X 10.7.5? I've been using MacKeeper but believe it's slowing down my laptop considerable. Thank you.

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

Where to find the user groups in SQL Server

Hello All,
where to find the user groups created in Shared Services in SQL Server tables?

Yes thats correct its stored in Openldap
Native Directory (OpenLDAP), an open source Lightweight Directory Access Protocol (LDAP)-enabled user directory, is bundled and configured with Shared Services.
Native Directory functions:
**Used to maintain and manage the default Shared Services user accounts required by Hyperion products*
**Is the central storage for all Hyperion provisioning information because it stores the relationships between users, groups, and roles.*
Cheers
John
http://john-goodwin.blogspot.com/

How do i find out what my serial number is? I cannot find the software and need to put it on a new computer. How do I do this?

I cannot find the software and need to put it on a new computer. How do I do this? I do not remember where the software is yet it is on my computer along with Photoshop CS6 extended. I have that disk but cant find anything else.

gr8gear,
You can see (only) part of the registration number under Help>About Illustrator.
If you have registered it with Adobe (optional up to CS4), you should be able to see it on your products page
https://www.adobe.com/account/my-products-services.html
Otherwise, you may ask in a chat here (depending on version):
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service1.html

I've tried multiply times to update itunes 10.5 but it keeps saying that it can't find the file and i can't reinstall itunes because it will delete the 100 gigabites of info on it what can i do

i've tried multiply times to update itunes 10.5 but it keeps saying that it can't find the file and i can't reinstall itunes because it will delete the 100 gigabites of info on it what can i do

I've had all kinds of trouble keeping my iTunes software current over the past year, but have found the easiest way to remedy the issue is to simply download the latest version of iTunes as though I am a first-time user and then just install it into the directory my current version of iTunes is using. Doing this has allowed me to update my software without losing any of my media/data. Hope this helps! Best of luck!!!

In which table can I find the name and surname for a username ?

Hello,
I search the table with the master data of users. Specially I search the table where I can find the
name, surname for a user.
In which table can I find the name and surname for a username ?
Thanx in Advance

Hello everybody,
thank you for the helpful informations.
thank you very much
with kind regards
cetoman

From which tables i would find the delivery and billing document field..??

I need to create an ALV report which displays the following details in the output.
Order No Item No     Material     Order Qty     Item Category     Plant     Delivery     Billing Document     Sales Org     Dist Channel     Division     Created By     Created On      Changed On
For(Order No Item No     Material     Order Qty     Item Category     Plant) i took the fields from vbap and
for(Sales Org     Dist Channel     Division     Created By     Created On      Changed On)i took the fields from vbak..
From which tables i would find the delivery and billing document field related to sales document.??
need help...
Moderator message : Requirements dumping not allowed, thread locked.
Edited by: Vinod Kumar on Mar 6, 2012 2:53 PM

i am new to abap...so i dont have idea about sd table relationship.
so please reply how to add delivery and billing doc in my coding below..
*& Report ZINAA_SD
REPORT zinaa_sd.
TABLES: vbap, vbak, vbfa.
TYPE-POOLS: slis.
CONSTANTS: c_x TYPE char1 VALUE 'X'.
TYPES:
        BEGIN OF st_vbap,
         vbeln TYPE vbap-vbeln,
         posnr TYPE vbap-posnr,
         matnr TYPE vbap-matnr,
         pstyv TYPE vbap-pstyv,
         kwmeng TYPE vbap-kwmeng,
         werks TYPE vbap-werks,
        END OF st_vbap,
        BEGIN OF st_vbak,
          vbeln TYPE vbak-vbeln,
          erdat TYPE vbak-erdat,
          ernam TYPE vbak-ernam,
          vkorg TYPE vbak-vkorg,
          vtweg TYPE vbak-vtweg,
          spart TYPE vbak-spart,
          aedat TYPE vbak-aedat,
        END OF st_vbak,
       BEGIN OF st_final,
         vbeln TYPE vbap-vbeln,
         posnr TYPE vbap-posnr,
         matnr TYPE vbap-matnr,
         pstyv TYPE vbap-pstyv,
         kwmeng TYPE vbap-kwmeng,
         werks TYPE vbap-werks,
         erdat TYPE vbak-erdat,
         ernam TYPE vbak-ernam,
         vkorg TYPE vbak-vkorg,
         vtweg TYPE vbak-vtweg,
         spart TYPE vbak-spart,
         aedat TYPE vbak-aedat,
       END OF st_final.
DATA:
      lt_vbap TYPE TABLE OF st_vbap,
      ls_vbap TYPE st_vbap,
      lt_vbak TYPE TABLE OF st_vbak,
      ls_vbak TYPE st_vbak,
      lt_final TYPE TABLE OF st_final,
      ls_final TYPE st_final,
      lt_fieldcat TYPE slis_t_fieldcat_alv,
      ls_fieldcat TYPE slis_fieldcat_alv,
      layout TYPE slis_layout_alv,
      lt_sort TYPE slis_t_sortinfo_alv,
      ls_sort TYPE slis_sortinfo_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln,
                s_erdat FOR vbap-erdat.
SELECTION-SCREEN END OF BLOCK b1.
PERFORM select_data.
PERFORM loop_final.
PERFORM sort.
PERFORM a USING:
      'VBELN' TEXT-002,
      'POSNR' TEXT-003,
      'MATNR' TEXT-004,
      'KWMENG' TEXT-005,
      'PSTYV' TEXT-006,
      'WERKS' TEXT-007,
      'VKORG' TEXT-008,
      'VTWEG' TEXT-009,
      'SPART' TEXT-010,
      'ERNAM' TEXT-011,
      'ERDAT' TEXT-012,
      'AEDAT' TEXT-013.
PERFORM display.
*&      Form SELECT_DATA
      text
FORM select_data.
SELECT
   vbeln
   vkorg
   vtweg
   spart
   ernam
   erdat
   aedat
   INTO CORRESPONDING FIELDS OF TABLE lt_vbak
   FROM vbak
   WHERE vbeln IN s_vbeln AND erdat IN s_erdat.
IF sy-subrc = 0.
    SORT lt_vbak by vbeln.
ENDIF.
SELECT
   vbeln
   posnr
   matnr
   kwmeng
   pstyv
   werks
   INTO CORRESPONDING FIELDS OF TABLE lt_vbap
   FROM vbap
   FOR ALL ENTRIES IN lt_vbak
   WHERE vbeln = lt_vbak-vbeln.
IF sy-subrc = 0.
    SORT lt_vbap by vbeln.
ENDIF.
ENDFORM.                    "SELECT_DATA
*&      Form LOOP_FINAL
      text
FORM loop_final.
LOOP AT lt_vbap INTO ls_vbap.
    ls_final-vbeln = ls_vbap-vbeln.
    ls_final-posnr = ls_vbap-posnr.
    ls_final-matnr = ls_vbap-matnr.
    ls_final-kwmeng = ls_vbap-kwmeng.
    ls_final-pstyv = ls_vbap-pstyv.
    ls_final-werks = ls_vbap-werks.
    READ TABLE lt_vbak INTO ls_vbak WITH KEY vbeln = ls_vbap-vbeln BINARY SEARCH.
    ls_final-vkorg = ls_vbak-vkorg.
    ls_final-vtweg = ls_vbak-vtweg.
    ls_final-spart = ls_vbak-spart.
    ls_final-ernam = ls_vbak-ernam.
    ls_final-erdat = ls_vbak-erdat.
    ls_final-aedat = ls_vbak-aedat.
    APPEND ls_final TO lt_final.
    CLEAR ls_final.
ENDLOOP.
ENDFORM.                    "LOOP_FINAL
*&      Form SORT
      text
FORM sort.
ls_sort-spos = '01' .
ls_sort-fieldname = 'VBELN'.
ls_sort-tabname = 'LT_FINAL'.
ls_sort-up = c_x.
ls_sort-subtot = c_x.
APPEND ls_sort TO lt_sort .
ENDFORM.                    "SORT
*&      Form A
      text
     -->FNAME      text
     -->SELTEXT    text
     -->EMPHA      text
FORM a USING fname TYPE string seltext TYPE string.
IF fname = 'KWMENG'.
    ls_fieldcat-do_sum = c_x.
ENDIF.
ls_fieldcat-fieldname = fname.
ls_fieldcat-seltext_m = seltext.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ENDFORM.                    "A
*&      Form ALV
      text
FORM display.
layout-zebra = c_x.
layout-colwidth_optimize = c_x.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
    is_layout                         = layout
    it_fieldcat                       = lt_fieldcat
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
    it_sort                           = lt_sort
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = C_X
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
    t_outtab                          = lt_final
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "ALV

Where to find the olb and pll directory

Similar Messages

Maybe you are looking for