Where to find the timeout setting for connecting to SAP Bi Universe in Power Query for Excel

Hi All,
I am trying to connect a SAP BI Universe. I am able to login to the environment and get the list of folders. But on trying to use the universe inside the folder, I am getting a time out error. The time out happens exactly at 100 seconds always.
DataSource.Error: SapBusinessObjects: The operation has timed out
Can you let me know if any setting can be done to avoid this timeout and get the universe into power query?

I have the same problem with Version: 2.17.3850.242. It times out after 100 seconds.
In addition, I couldn't report it by sending a frown. Get the following error message
Error Message: Could not load file or assembly 'Microsoft.Office.Interop.Outlook, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'
or one of its dependencies. The system cannot find the file specified.

Similar Messages

HT4972 where can I find the update setting for my ipad 4 version?

Where can I find the update setting for my ipad 4 version?

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

Where to find the best application for cleaning out my MacBook Air with OS X 10.7.5? I've been using MacKeeper but believe it's slowing down my laptop considerable.

where to find the best application for cleaning out my MacBook Air with OS X 10.7.5? I've been using MacKeeper but believe it's slowing down my laptop considerable. Thank you.

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

Where to find the document category in oracle purchasing for existing attachments?

Where to find the document category in oracle purchasing for existing attachments and also how to create a new category?

Hi Sanjay,
We are looking to add the below 3 marked document categories to Purchasing.
But here the application is for order management, how can we use them for purchasing?

Where to find the XSLT used for the standard interface in SAP ME 5.2 SP05?

Hallo!
Starting with SAP ME 5.2 SP05 there is a new logic for the standard interface used in SAPMEINT.
I wonder where to find the XSLT's that are used for transforming the XML messages?
I can see from the SAP NW log:
[Transaction: -1] starting execution of Visiprise/ERPShopFloorIntegration/frame/workflow/XSLTDelegate.trx
Loading file Visiprise/WEB/XSLT/Outbound/EquipmentStatusChangeUnSchDown/EquipmentStatusChangeUnSchDownRequest.xslt
select: path Visiprise/WEB/XSLT/Outbound/EquipmentStatusChangeUnSchDown
select: name EquipmentStatusChangeUnSchDownRequest.xslt
The definition for this XSLT is as follows:
WEB://Visiprise/XSLT/Outbound/EquipmentStatusChangeUnSchDown/EquipmentStatusChangeUnSchDownRequest.xslt
How is this resolved???
From the (pre SP05) SAPMEINT I know two variants:
1. High performance interface
The XSLT files come from the MII shared memory entries for project SAPMEINT
2. Standard interface
The XSLT files come from SAP ME (table XSLT and XLST_ASSIGBNMENT) via calling a HTTP URL like
http://<hostname>:<port>/manufacturing/vm/xslt?id=RouterFeed
Kr,
Erich Lind

Hello!
I found the answer myself now.
The XLST files are part of the static web content of the MI project Visiprise.
In the SAP MII workbench go to the project Visiprise
Then under the tab Web the static contecnt can be found under the folder WEB/XSLT/..

Where to find the download link for the Portal BP for Payer Direct?

Can anyone tell me where to find the download for the BP for Payer Direct???
I see information about it on help.sap.com.
Also, it is mentioned in detail in the docs for the BP for Supplier Collaboration.
But I cannot find anything for it on SDN or Service Marketplace.
Thank you in advance

I finally found it in the Content Portfolio.
I was including the "" in my search...like "Payer Direct". This way was just returning every one of the BPs.
But if I search on Payer Direct without the quotes around the term, then I get the result.
In my result, it does not say License Required. I get the download icon, and it says "The license for this package is included in the mySAP ERP (P) or the mySAP SRM (P) or the SAP Financial Supply Chain Management (P) or NW User (for R/3 Users)license."
But when I click on the download link, it does not work. I get a syntax error.

PA-US Where to find the documentation for renumeration type?

Gurus,
Where to find the documentation for renumeration type details for IT0008 in SAP Library?
I tried in HR sections under ERP of SAP Library, but could not find the place.
Thanks,

Revathi,
I see an option to change the enum type in IT0008 maintenance screen.
Which simply changes section of the screen as "salary" to "pay scale" and vice versa.
I want to understand the difference between those in terms of payroll process (calculations).
Hence, I was trying to find documentation in this regard in SAP Library.
Thanks,

Where i find the drivers for hp j5783 scaner

where i find the drivers for hp j5783 scaner

Hello ezraie, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are looking for the drivers. I would like to help.
I would recommend following this link to the HP Officejet J5783 All-in-One Printer Drivers.
Please let me know if you have any questions. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Where do I find the Ringtone setting of this update?

I would like to be informed where i can find the ringtones setting on this new iTunes update?

What is a "ringtones setting"?

How to find the materials set for forecasting in APO..?

Dear Experts,
Could anyone please help me out in letting me know how to find the materials set for forecasting in APO, BY either using pegid or by using matid & locid combinations...? Please help me out ASAP as Iam severly stuck at one place.
Thanks in advance..
Regards,
Sanjay.

Hi Sanjay,
Please have a look at the table /SAPAPO/PEGKEY.
If u have any questions in APO goto the APO forum and raise ur doubts.
Thanks,
Siva.

Can some tell me where to find the documentation for Oracle forms 6i,11g

Hi Everyone
Can someone please tell me where to find the online documentation for Oracle Forms 11g and 6i .
Thanks in advance
Gautam

Most of the design time documentation is included in the Design-time tools (Builders). Specifically in the Builder Online Help. This information is no longer available on a web site. As for Forms 6i, hardly any of that information is available on the Oracle site any longer. That version has been obsolete for several years. You can find some of the old deployment documentation for 6i (6.0.8):
http://www.oracle.com/technetwork/developer-tools/forms/documentation/techlisting-084882.html

Where to find the top line on a page on the Internet at IMac? I lost it when was trying to set my ITV on my computer. Can't go to any pages, because there is no line on top of the page. Thank you.

Hello, where to find the top line on a page on the Internet at IMac? I was trying to made some settings to my computer and now I lost the line on top of my computer , when I open a page. Thank you.

I'm not sure which line you are refering to as the top line.
What web page?
What web browsr?
What do you expect to see on the missing line?
How about a picture?
How to show us a screen image. Avoid personal identification.
command + shift + 3 Will take entire screen. You hear a click.
command + shift + 4 Lets you decide what to take. Mouse pointer changes. Move mouse to upper left corner of desire image. Hold down left mouse key where to start image. Drag mouse to lower left of where you want to stop image. Release mouse.
You will get a picture n.png file on the desktop.
one the forum input panel you will see the camera icon.
click on camera icon.
another window will appear.
Make sure you have selected the from your computer tab.
click on Browse button
An open file panel appears. Select the file.
After selection a file, I have this screen showing.
You will have to click on Insert Image. You may have to scroll down to see Insert Image button.

How to find the number of users connected to database from OS level(Linux)

Hi All,
Could anyone know , how to find the number of users connected to database without connecting with sql*plus
is there any command to find it?
example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
oracle version:- 10g,11g
Operating System:- OEL4/OEL5/AIX/Solaris
any help will be appreciated.
Thanks in advance.
Thank you.
Regards,
Rajesh.

Excellent.
Tested, works as long as you set the ORACLE_SID first ( to change databases )
ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
Thanks!
select OSUSER
from V$SESSION
where AUDSID = SYS_CONTEXT('userenv','sessionid')
and rownum=1;Best Regards
mseberg

How to find the number of ODBC connections to Oracle Database

Hi All,
How to find the number of ODBC connections and all connections to the Database in last week. Are there any views to get this information?
Thanks in advance,
Mahi

What Ed said is true that Oracle doesn't note which type of protocol is connecting to the database, however, you can see which program is accessing the database.
For example: if you already know of a user using ODBC, you can verify as:
select username, osuser, terminal, program from v$session where username = 'SCOTT'
USERNAME                 OSUSER          TERMINAL   PROGRAM
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
2 rows selected.Assuming that you can confirm the progam noted in the above (example) is the one using ODBC, then you can change the query such as:
SQL> select username, osuser, terminal, program from v$session where program = 'w3wp.exe';
USERNAME                 OSUSER          TERMINAL   PROGRAM
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
2 rows selected.Just for kicks, I checked our listener.log file, but there was no reference of odbc in it either.
Hope this helps...

WHERE TO FIND THE Mac OS X to reinstall the programs?

WHERE TO FIND THE Mac OS X to reinstall the programs?

If you're talking about OS X 10.6 or earlier, iLife and other programs are on the application disk, usually the second disk of the set. If you need a set, you can call Apple Support to see if they are still available for sale for your system. The first disk is the operating system.
If they don't have the original OS X disks for your system, you can buy OS X 10.6 from the online Apple store, via phone or online. And the iLife programs from vendors like hardcoremac.com and on Amazon.com. OS X 10.5 is no longer available from Apple and has to be bought from a vendor or used. If you buy used, buy a retail copy and not the gray-faced copies, as they are locked to the system type they are delivered with.
If you're talking OS X 10.7 or later, those are loaded from the App store, as there are no disks included with those systems.

Where to find the timeout setting for connecting to SAP Bi Universe in Power Query for Excel

Similar Messages

Maybe you are looking for