Where to find the XSLT used for the standard interface in SAP ME 5.2 SP05?

Hallo!
Starting with SAP ME 5.2 SP05 there is a new logic for the standard interface used in SAPMEINT.
I wonder where to find the XSLT's that are used for transforming the XML messages?
I can see from the SAP NW log:
[Transaction: -1] starting execution of Visiprise/ERPShopFloorIntegration/frame/workflow/XSLTDelegate.trx
Loading file Visiprise/WEB/XSLT/Outbound/EquipmentStatusChangeUnSchDown/EquipmentStatusChangeUnSchDownRequest.xslt
select: path Visiprise/WEB/XSLT/Outbound/EquipmentStatusChangeUnSchDown
select: name EquipmentStatusChangeUnSchDownRequest.xslt
The definition for this XSLT is as follows:
WEB://Visiprise/XSLT/Outbound/EquipmentStatusChangeUnSchDown/EquipmentStatusChangeUnSchDownRequest.xslt
How is this resolved???
From the (pre SP05) SAPMEINT I know two variants:
1. High performance interface
The XSLT files come from the MII shared memory entries for project SAPMEINT
2. Standard interface
The XSLT files come from SAP ME (table XSLT and XLST_ASSIGBNMENT) via calling a HTTP URL like
http://<hostname>:<port>/manufacturing/vm/xslt?id=RouterFeed
Kr,
Erich Lind

Hello!
I found the answer myself now.
The XLST files are part of the static web content of the MI project Visiprise.
In the SAP MII workbench go to the project Visiprise
Then under the tab Web the static contecnt can be found under the folder WEB/XSLT/..

Similar Messages

Can anyone tell me where to find an install guide for the Liveoffice app.

Can anyone tell me where to find an install guide for the Liveoffice app.
Thanks
Jeff

Hi Jeff,
You can download the install guide for Liveoffice application from the link provided below,
http://help.sap.com/businessobject/product_guides/boexi/en/boXI_LiveOfficeInstall_en.pdf
Hope this helps you.
Regards,
Abhijeet T.

What are the materials used for the earbuds/earphones??

What are the materials used for the earbuds/earphones?? Like whats the plastic used and what are the speaker materials and the volume button???

Hello Veronica176
The materials in Apple headphones include Neodymium magnets, oxygen-free electrolysis copper wire and a Nickel plated plug
Apple uses Neodymium magnets in their headphones as it is much more magnetic compared to that of a ferrite magnet. This also further enhances the accoustics of sound and preventing any loss of sound. Because of this, you can get the same sound out of Apple headphones as the good ol' circum-aural headphones (image attached).
Oxygen free copper wire is created through electrolysis which is furthermore considered an above average material for headphones, thus ensuring better sound quality. Oxygen free copper wire ensures a faster transfer time (as copper is one of the best conductors) and because of this, allows a faster transfer time, minimising loss. This means the sound quality of the music/sound playing may actually depend more on the quality of the MP3 file than the headphones.
The nickel plated plug used by Apple is a standard connection and joins to a female connection into the iPod (for example) which is also nickel plated. Where gold plated plugs are renowned to transfer more data and superior sound quality when connected to any device. Connecting the same metals during transfer (nickel plated plugs and nickel female connections) ensures optimum sound as the signal will not be jumping different kinds of metal. The lack of gold plating also helps to reduce the cost in manufacturing and to the customer.
If you have any more queries, please feel free to ask further questions, it is what we are here for

What r all the tables used for the following report

hai
what r all the tables used for the following report
report:
<b>
Report that displays all the late shipments in a particular period of time</b>
send important fields for this tables also
thanks in advance.

Hi,
Imp table are vttk,vttp,vtts.
Regards
Amole

Tables to get the hierarchy used for the global Variable

Hello,
we are using a characteristic Reporting Unit "ZCS_RDRUN" with a input ready variable "ZCS_RV_MM_REPUNITHIER_RDM".
The reporting unit is a hierarchy characteristic and the variable is a hierarchical variable of type Hierarchy node variables fixed to a hierarchy we are using for this query. We do have selected a hierarchy for the input ready variable e.g. Total Group. My question would be is it possible to read out the selected hierarchy of the input ready variable from a table? If YES, from which table? I know that we could read out all input ready variables but i dont know how to read out the hierarchy selected for the input ready variable of type "Hierarchy node variable".
I would be very thankful for all your help
Thanks and kind regards,
Muri

You check the query run times and other details in the work load analysis (ST03) or using the table RSDDSTAT .
inorder to check the information using the above two methods -make sure the Bi stats are maintained in your system
http://wiki.sdn.sap.com/wiki/display/MaxDB/WorkloadMonitor%28ST03orST03N%29

Where to find MD5 or SHA1 for the JRE/JDK?

I am trying to download the latest 1.6 JRE and JDK, but I don't see any MD5/SHA1 hashes?
Anyone know where I can get these (from Oracle, not a third party).
Given recent security issues, I would be surprised if they didn't offer these.
Thanks!

That's not completely true. It depends on where you download it from. For example you can go to http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase7-521261.html#jdk-7u17-oth-JPR which will let you choose which build of 7u17 you want. You can download Windows x86 (or x64) which will download the entire offline installation. I also use http://www.filehippo.com/download_jre_32/tech/14874/ (becuase I trust it). While I download the EXEs and MSIs from oracle's website, filehippo has MD5 hashes listed. Just an idea. If you're needing a script that can get MD5 hashes you could like at using AutoIt. It has a build hashing function. The scripting language is easy to use and it has a strong community (http://www.autoitscript.com/autoit3/docs/libfunctions/_Crypt_HashFile.htm).

How Do I Change The Image Used For The Power Up Screen?

Windows 8.1 Pro with all patches.
How do I change the image that is shown when you power up a PC?
Note: This is not the Start Screen background or the Lock Screen background or the Desk Top background.
http://www.saberman.com

Unfortunately, the suggested solution in that thread does not work and the thread appears to be closed to replies. That is, even though I am logged in the Reply|Quote|Mark as answer|Report as abuse items are missing.
The suggested solution is:
First, I found I had "img100.png" in C:\Windows\Web\Screen and
C:\Windows\WinSxS\x86_microsoft-windows-themeui-client_31bf3856ad364e35_6.2.9200.16384_none_69ee3fa2269e545e
1. Belonging to the Administrators Group, I replaced file Owner TrustedInstaller with my Username on both "img100.png" files
2. After resizing the image I wanted to see on the Login screen to the resolution of "img100.png" file,
I copied and pasted it to both "img100.png" files keeping this way the format (extension) and resolution of the original "img100.png" file,
which I permanently deleted.
However, I have not been able to replace the img100.pgn in C:\Windows\Web\Screen even after taking ownership of it and setting the permissions for my userid to All. I edit it with mspaint and then try to save it. The save starts that then says the
save was interrupted.
The appears to be some additional protection besides the standard acls.
http://www.saberman.com

Where shouold I find jvm.h used for the native launcher compile?

I examined the source in src.zip to try to compile the native launcher and to better understand how some of the new features of Java 6 were implemented.
It includes a reference to jvm.h, but I have not located what I can be sure is the proper copy.
One copy I found contained a reference to jvm_md.h also referenced but I could not locate a reliable copy of that.
Where would these, and any other missing, files be found? I would like to compile the launcher for Windows.
Is there a better forum on which to post such a question as this?

You need to download the Mircrosoft Windows SDK. Try http://www.microsoft.com/msdownload/platformsdk/sdkupdate/
and click on the link labeled Core SDK.
It includes windows.h and associated header files.

What are all the tables used for this report ? please reply

hai
i have practcing reports,
so any one give me the name of the tables used for the below report
<b>Created report for invoice details, shipping details and partner function.</b>
thanks in advance.
by
ashok

Hi Ashok,
I am sending you the code which will display tables present in SAP with the description and jump to datadic or SE16 by selecting plus F2 or F8.
REPORT ZZBGS044 MESSAGE-ID Z1 LINE-COUNT 65 LINE-SIZE 132
                NO STANDARD PAGE HEADING.
Description: This program list all tables in        regards to the   *
             selection criteria.                                     *
Customizing: You need not to make any customizing to use this program*
Change of    You only have to check that tables, functions and       *
release:     includes till exists. Bedst just to check and run the   *
             program.                                                *
Programmer: Benny G. Sørensen                                       *
Date:        July 1995                                               *
SAP R/3      2.2F                                                    *
Corrections----
Date        Userid     Correction                                    *
xx-xx-xxxx xxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx *
TABLES: DD02V                "SAP tables view
DATA: BEGIN OF DYNTAB OCCURS 2000.
        INCLUDE STRUCTURE BDCDATA.
DATA: END OF DYNTAB.
DATA: BEGIN OF TABLES OCCURS 100.
        INCLUDE STRUCTURE DD02V.
DATA: END OF TABLES.
DATA: L        TYPE I,
      REPL(30) TYPE C VALUE '????????????????????????????'.
FIELD-SYMBOLS:
PARAMETERS:
TABLE(30) TYPE C,
TITLE(74) TYPE C LOWER CASE DEFAULT ' ',
DOWNLOAD(1) TYPE C DEFAULT ' ',
FILENAME(65) TYPE C DEFAULT 'c:SAPDOC?',
EXCEPT(30) TYPE C DEFAULT ' '.
START-OF-SELECTION.
IF TABLE = ''.
TABLE = '*' .
ENDIF.
IF TITLE = ''.
TITLE = '*' .
ENDIF.
TRANSLATE TABLE USING '*%'.
TRANSLATE TITLE USING '*%'.
CONDENSE EXCEPT NO-GAPS.
L = STRLEN( EXCEPT ).
IF L > 0.
ASSIGN REPL(L) TO
ENDIF.
SELECT * FROM DD02V INTO TABLES
WHERE DDLANGUAGE = SY-LANGU
AND TABNAME LIKE TABLE
AND DDTEXT LIKE TITLE.
HIDE DD02V-TABNAME.
IF EXCEPT NE ''.
REPLACE EXCEPT LENGTH L WITH
INTO TABLES-TABNAME.
ENDIF.
TRANSLATE TABLE USING '% '.
CONDENSE TABLE NO-GAPS.
IF TABLES-TABNAME CS TABLE.
WRITE:/ TABLES-TABNAME, ' ', TABLES-DDTEXT.
APPEND TABLES.
ENDIF.
ENDSELECT.
IF DOWNLOAD NE ''.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FILENAME
FILETYPE = 'WK1' "ASC, WK1, DBF, DAT, bin
TABLES
DATA_TAB = TABLES.
ENDIF.
AT LINE-SELECTION.
SET PARAMETER ID 'DOB' FIELD SY-LISEL(30) .
CALL TRANSACTION 'SE12' AND SKIP FIRST SCREEN.
AT PF8.
CHECK SY-LISEL <>
SET PARAMETER ID 'DTB' FIELD SY-LISEL(10) .
REFRESH DYNTAB.
PERFORM DYNPRO USING:
     'X' 'SAPMSTAZ'     '0100'        "Selection screen
    ,' ' 'DD02V-TABNAME' SY-LISEL(10).
CALL TRANSACTION 'SE16' USING DYNTAB MODE 'A' .
FORM DYNPRO USING DYNBEGIN NAME VALUE.
IF DYNBEGIN = 'X'.
    CLEAR DYNTAB.
    MOVE : NAME TO DYNTAB-PROGRAM,
            VALUE TO DYNTAB-DYNPRO,
            DYNBEGIN TO DYNTAB-DYNBEGIN.
    APPEND DYNTAB.
ELSE.
    CLEAR DYNTAB.
    MOVE: NAME TO DYNTAB-FNAM,
           VALUE TO DYNTAB-FVAL.
    APPEND DYNTAB.
ENDIF.
ENDFORM.
Regards,
Azaz Ali.

CUCM SIP Trunk Unable to find a device handler for the request received

I have a lab running CUCM 10.0 that has a SIP trunk to a VCS. Previously I was able to place and receive calls across the trunk, but now I can only place calls, not receive. I did recently upgrade to 10.5, but I really can't recall if it ever worked after the upgrade. The error I'm getting in CUCM is
Unable to route message, Cannot find the SIP Device with Name=192.1.1.61, Source Port=5060, IpAddress Type=0
This confuses me, because the destination IP/port of the VCS SIP trunk is 192.1.1.61:5060. The trunk on CUCM show as up and the Zone in VCS shows as up. What is going on?
Thanks, Mike

I figured it out. Long story short, it was a port mismatch. When you configure Mobile Remote Access on the Expressway Core it creates a SIP trunk from Expressway to CUCM using port 5060. If you then create another SIP trunk from the same Expressway to CUCM for firewall traversal or external calling, you must use a different port. The port used for the zone in Expressway must match the SIP security profile used on the CUCM side SIP trunk. So I had created another SIP Security profile in CUCM with port 5062 for this purpose. However, the VCS in question that I was working with was only being used for FW traversal, so I used 5060 as the port on the VCS side, but I applied the SIP security profile that used 5062 on the CUCM side. That's why CUCM was throwing that "device not found" error. Once I changed the Security Profile to match the same port used on VCS (5060) all was well. Sorry for the long winded answer. Hope it helps someone else down the road.

What data is used for the link title in osssearchresults.aspx

In our OOTB SharePoint installation we have a search results page in a collaboration site that displays Word documents. Each word document has a Title property, however the text used for the hyperlink to the document in the search results page does not seem
to use the Title property, instead it uses some text from inside the document, e.g. the contents of the first H1 tag.
I had a look at the XSL of osssearchresult.aspx core results web part, and this uses a "title" parameter. So I can only assume that when SharePoint search catalogues a Word document, it decides to ignore the title property of the list item
and instead derives the title text from content within the document itself.
Is that correct? Or am I missing something? Can I change the title for Word documents in search to be the actual title of the list item?

Hi,
The word documents have two columns “Name” and “Title” by default. The “Name” column is the file name and is “file” column type, its related Crawled Property is ows_LinkFilename
. The “Title” column is the document title and is “Single line of text” column type, its related Crawled Property is ows_Title . When SharePoint Search crawls the word document, both the two columns are crawled. However, the ows_Title
crawled property is mapping to “Title” managed property, but the ows_LinkFilename crawled property does not map to any managed property. In the SharePoint search results, the word document shows its “Title” managed property.
So for your scenario, the search result should show the “Title” column value. Please go to your document library and verify the “Title” column’s value of your word documents.
For more information, you can refer to the thread:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/4e1749cd-cf4d-46d6-98e2-3f42366e376e/how-does-the-search-result-are-displayed?forum=sharepointadminprevious
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

What are the printers used for cheque prinitng ?

Hi all,
what are the printers used for cheque prinitng ?

Mostly SAp supports all printers( mostly used are HP ones) but all printers can be configured in SAP.
Regards,
SaiRam

What is the font used in the buttons in Titanium skin?

Hello,
I need to know what the font used for the buttons (Contents,
Index, etc) in the WebHelp Titanium (RoboHelp 6) skin. I need to
know because I want to use this skin, and also include a Print
button.
Thanks!
Jennifer Bennett

Hi Jennifer. If you download the skin and open it in the skin
editor you'll see the font used next to the "Font" button near the
bottom r/h/ corner. You can also use the button to change the font
if you wish.

How to Read the internal table for the data download from the spool

HI all,
I have one issue regarding the spool ,we are getting the correct output as per requirement of user but when we send the same to the user in pdf format they did notget the same.
they are telling that the due date is missing from the pdf.
Please advice me how to track the internal table for the spool data converted intopdf in a readable format.
the FM used for the above task is :
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Please reply if any one worked on the same.
Thanks in advance.
Gaurav,

Hi Wang,
Please let me know how you solved your question.
Points will be rewarded.
Thanks,
Arun.

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

Where to find the XSLT used for the standard interface in SAP ME 5.2 SP05?

Similar Messages

Maybe you are looking for