Where to find XceedZip.dll

Hello,
sorry for raising up the topic again, but the last thread with same topic could not provide the needed answer.
Currently I´m preparing my client for the use with BPC. Therefore we need to have the dll  = XCeedZip.dll
Following the installation guide, the file should be available with
http://service.sap.com/swdc/   -->  Download SAP --> Cryptographic Software
But I cannot find the file within this folder and the only file, supposed to be the one, called "(SAP Business Planning & Consolidation 5.1 and higher" is not available.
Q: Please, can someone give me a hint, where to download XceedZip.dll
Thanks a lot in advance.
Regards
Torsten

All -
The Xceed software product is subject to export control regulation in Germany as the country of origin and import regulation of your own country. SAP may not yet have a corresponding export license for your user / company. Please contact the contract department of your local SAP company.
Please note that to download the SAP Cryptographic Software from the SAP Service Marketplace, you need a customer user-id.
Regards,
Sheldon

Similar Messages

  • Where to find SOS.dll for silverlight 5

    I wan to use windebug to debug a Silverlight issue, and some doc told me that SOS.dll is needed to analyze managed  code. However, I cannot find SOS.dll under C:\Program Files (x86)\Microsoft Silverlight\5.1.30514.0 or C:\Program
    Files\Microsoft Silverlight\5.1.30514.0, which was said the default location of that file for Silverlight. what should I do? I even installed Silverlight tools for VS10 and Silverlight sdk, but neither is useful.

    Hi,
    If you run 64bit windbg you need the 64bit sos.dll whidch should be under  C:\\Program Files\\Microsoft Silverlight\\5.1.10411.0\\), otherwise run 32bit windbg againts 32bit explorer/sllauncher that works perfectly fine for me on win 7 x64.
    For more details,please refer to article below:
    https://msdn.microsoft.com/en-us/library/bb190764(v=vs.110).aspx
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Where can i find ACROPDFlib.dll 64 bit dll or is there any alternate to use pdf for 64 bit?

    Where can i find ACROPDFlib.dll 64 bit dll or is there any alternate to use pdf for 64 bit?
    No Matter either its free or Not . ?
    Or can I order this Dll to Adobe ?

    The Adobe PDF Library is licensed on behalf of Adobe by DataLogics. Price is by negotiation.
    http://www.datalogics.com/products/pdfl/

  • Compiling Invocation Programs ? Where to find javai.lib ??

    Hello,
    I'm having J2SE 1.4, VC++ 4.0. I'm trying to compile the invocation programs given in the Java Tutorial but I'm unable to compile since I've not found javai.lib in my J2SE folder. Can anyone help me on how to compile. Where to find javai.lib ??
    Thanks
    Wah Java!

    The javai.lib/dll have been replaced by jvm.lib/dll
    since Java2 SDK 1.2. The javai.lib is in the "lib"
    directory of your JDK installation. Note that the
    invocation API has also changed, and you will probably
    need to update the method calls. See the JNI spec at
    http://java.sun.com/j2se/1.4/docs/guide/jni/spec/jniTOC
    doc.html.As you've said, I compiled the program and linked with jvm.lib but VC++ said that jvm.lib is incorrect file (or you can say corrupt file). Can you please help me how to compile with JVM.lib
    Thanks in advance,
    Ashish Shukla
    Wah Java!

  • Cannot find KeycodeV2.dll, or invalid keycode

    Hi,
    First of all i appreciate your great help.
    We are getting following error.
    Cannot find KeycodeV2.dll, or invalid keycode
    Current server details:
    We have crystal reports version 9.1.0.0 installed in Windows Server 2003 R2 Standard Edition and being used this in our visual studio project which is in framework 1.1. The crystal reports in the project are working good.
    Migrating to new server, here are the details:
    Windows 2008 Server Standard Edition and .NET framework 4.0.
    We just upgraded the asp.net project from framework 1.1 to 4.0 and moved the code to the new server. We didn't do any crystal report installation in the new server.
    When we try to run the reports, we are getting following error.
    Cannot find KeycodeV2.dll, or invalid keycode.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: CrystalDecisions.CrystalReports.Engine.InternalException: Cannot find KeycodeV2.dll, or invalid keycode.
    Source Error:
    Line 23:    
    Line 24:     Public Sub New()
    Line 25:         MyBase.New
    Line 26:     End Sub
    Line 27:    
    Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1
    Any help highly appreciated.
    Thanks in advance
    Edited by: rdevarasetty on Dec 8, 2011 8:48 PM

    Moved to .NET SDK forum
    Search here, lots of info on what is supported. CR 9 is not supported in VS 2010, set your project back to 2.0 framework and install the C++ runtime files for VS 2005 Security pack. That may help you.
    Only versions of CR are CR XI R2 SP 6 and CR 2008 SP 2 and above on Windows 2008 Server. And I believe CR 9 only supports IIS 6 so set your App Pool to Legacy Mode.
    Don

  • Where to put AntiXssLibrary.dll file after installation of BPC Server

    Hi Experts,
         In the installation of BPC, that is after the installation of BPC Servers there comes another step "Installing the Anti-Cross Site Scripting Library"....The document tells us to download "AntiXssLibraryV1.5Installer.msi" and run the setup. Once it gets done the final step says "Copy AntiXssLibrary.dll to %BPC_PROGRAM%\Websrvr\Web\bin on both the BPC Application server and the BPC Web server." I can't understand where i should paste the file on Application Server and I could paste it in "C:\BPC\WebSvr\Web\Bin" what is the other location I should put the file.
    I am installing BPC on single server...Please help me out...
    Thanks
    Sudhakar Kuricheti

    Hello,
    Please use the follow link
    http://www.microsoft.com/downloads/details.aspx?FamilyId=EFB9C819-53FF-4F82-BFAF-E11625130C25&displaylang=en
    to download an installation kit for Microsoft Anti-Cross Site Scripting Library.
    In this way you will not have any more the problem where to put a dll and what you have to do with it.
    This program should be used into application server it is not necessary to put it into db server.
    If you have problem regarding unzip of dimensions then you have to check if you have into client side into C:\Program Files\BPC the dll xceedzip.dll and you have to check if this was correct register. (using regsvr32).
    I hope this help to understand what is that dll and what you have to do to complete the installation of SAP BPC server.
    Regards
    Sorin Radulescu

  • I cannot send email over 3G. Receiving email is ok. Using wifi from my landfibre allows me to send email. No idea where to find the solution. Suggestions please. Thanks ia

    I cannot send email over 3G. receiving email over 3G is ok. Using wifi from my landline (glass) is ok. No idea where to find the solution. Suggestions please. Thanks i.a.
    TheOne

    You need a DATA service enabled by your carrier to be able to send e-mail via thier network.  Do you have a data plan with your carrier ?  If so - is it enabled ?
    Can you access internet thru your network (not wifi) ?

  • Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?

    Hi Experts,
    do anybody knows Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?
    For example
    Sales Register
    Purchase Register
    Journal Register
    Sales Analysis - Crystal Report
    Purchase Analysis - Crystal Report
    Check Register - Crystal Report
    Production register
    Pending Sales Order
    Outstanding Receivable
    Outstanding Payable
    BankBook
    CashBook
    General Ledger
    BP Ledger (Customer / Supplier)
    Trial Balance
    Balance Sheet
    Profit & Loss Statment
    Cash Flow statment
    Excise reports
       RG 23 A Part I
       RG 23 A Part II
       RG 23 C Part I
       RG 23 C Part II
       Daily Stock Account
       RG 1
       ER 1
       etc....
    Documets Layout
       Incoming Payment
       Outgoing Payment
       Journal Entry
       Transaction Journal Report - Crystal Report
       Sales Quotation
       Sales Order
       Sales Delivery
       Sales Return
       Sales Invoice (A/R Invoice)
       Purchase Order
       Goods Receipt PO
       Purchase Goods Return
       Purchase Invoice (A/P Invoice)
      Inventory Transfer
      Inventory - Goods Receipt
      Inventory - Goods Issue
    Best Regards,
    Samir Gandhi

    Hi Neetu,
    Do you wish that at all customer site all concern involved in implemtation do the same work ?
    I believe ERP is meant for single entry system, and it should be true for implementation also, why to invest man hours for the same task ?
    I expect it standard reports should be released by SAP, so that speed of implementation improve, we have more nos. of satisfied customers.
    customised reports is all together different and it is understood that it is needed to be developed after study the exact requirement.
    Best Regards,
    Samir Gandhi

  • I have set up a new itunes library and am trying to sync this with my iphone.  My iphone is asking for an 'exchange' password.  I don't know what this is or where to find it.

    I am trying to sync my iphone with a new itunes library.  The iphone is askin for an 'exchange' password.  I don't know what this is or where to find it.

    Sounds like you do have an Exchange account setup on your phone. Have a Gmail or Hotmail account? They can both be setup as Exchange accounts. Have a work email account?

  • Re-installed itunes; now how do I tell the program where to find music on my external?

    I just uninstalled and reinstalled itunes. I keep my files on an external hard drive--but in 2 different folders on the same hard drive. Problems: 1. Itunes does not know where to find the files. I get a little exclamation point next to all the songs. 2. Only songs from one of the two locations show up at all.
    Less important, though still of interest to me: Only some of my playlists are showing up as well. I think I had two different itunes library .xml files before. And it is looking at the older of the two. Is that possible?
    Thanks

    Try restarting AppleTV by unpowering as well as restarting computer/iTunes and router.
    AC

  • I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network.  Does anyone know where to find this?  It's a password that I set myself, not the one that came with my router.

    I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network.  Does anyone know where to find this?  It's a password that I set myself, not the one that came with my router.

    It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
    Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
    Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
    The network password will appear in the box.
    Quit Keychain Access.

  • HT200285 I want to change my wallpaper to an image that was available before I upgraded to IOS 8.1.3 - a close-up image of long reedy  grasses with hazy light in the background. Greyish hues. Where can find the image & how do I get it back on my phone?

    I want to change my wallpaper to an image that was available
    before I upgraded to IOS 8.1.3 - a close-up image of long reedy  grasses with hazy light in the background.
    Greyish hues. Where can find the image & how do I get it back on my phone?

    I want to change my wallpaper to an image that was available
    before I upgraded to IOS 8.1.3 - a close-up image of long reedy  grasses with hazy light in the background.
    Greyish hues. Where can find the image & how do I get it back on my phone?

  • I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

    Hi people,
    I'm typing from Brasil, sorry my English.
    I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
    I intend to keep the original DVD driver and install the SSD in the same HD place.
    If yes, where I find a tutorial about this?
    And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
    http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
    What brand and model of SSD do you recommend?
    Thanks a lot for now and best regards all.
    Carlos Sgrillo
    Porto Alegre, RS, Brasil

    Tukaine
    Sep 23, 2012 10:59 PM
    Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
    This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
    Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
    When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
    If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
    Fixes people have used in the past included:
    Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
    Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
    Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
    Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
    HDD Fan Control
    HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
    It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
    Instead of HDDFan Control, get the free SSDFan Control
    http://exirion.net/ssdfanctrl/

  • Itunes update failed on 2 computers, couldn't find msvcr80.dll files.Now have no itunes at all

    iTunes update failed on both computers. Couldn't find msvcr80.dll, now I have no iTunes at all. Is it iTunes or the computers?

    Beth Trachtenberg wrote:
    I did NOT move the other folders (Album Artwork, Mobile Applications, Playlists, Previous iTunes Libraries) or files (iTunes Library, iTunes Library Extras, iTunes Library Genius, iTunes Music Library) that are located inside the Music/iTunes folders.
    should be no problem. i'm doing this also.
    Everything was working fine on both computers - Consolidated the library on the external drive and did the Change the location of the iTunes Media folder in Preferences on both computers, no problem.
    However I added two movies and a few songs to my desktop Mac yesterday - all showed up and played fine after adding them - but when I plug the external drive into my laptop, the new additions don't appear in the library.
    if you're purchasing content from the iTMS, you could use _*Home Sharing*_ to automatically add new content to all machines on your local network.
    Am I right in guessing that it is because the iTunes Library file on the laptop isn't the same as the one on the desktop computer?
    yes.
    Is there a way to add them to the library listing on the laptop? If yes, is that something I need to do every time I connect the external drive to the laptop if I've added things from the desktop computer (I never add stuff on the laptop).
    basically, yes. however, there's _*Home Sharing*_ and ... see below.
    Should I have put the entire iTunes folder - files, folder and media - onto the external drive?
    that's one possibility, however, only one Mac @ a time could access that library. there are other options:
    *the easy way*
    check out TuneRanger.
    *the more involved way*
    click here for tips/information.
    JGG

  • HT1926 Installation of latest  itunes update stopped, gave error message re couldn't find MSVCR80.dll. Suggested reinstall. Tried but that generated same message. Now get that message when I try to open itunes. I have Windows XP. Help!

    Installation of latest itunes update stopped, gave error message "couldn't find MSVCR80.dll"  Suggested reinstall. Tried but got same message. Now get same error message when I try to open itunes. Help!

    Hey jeight26,
    When you uninstalled and reinstalled iTunes, did you use this article?
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Sincerely,
    Delgadoh

Maybe you are looking for