Where to get a 3:4 7.1 cab

I've read a few posts asking this, sorry to add to them but my frustration is reaching it's limits.
I bought an Audigy 4 at the weekend as an upgrade to my previous 7. soundcard (Hercules Fortissimo III) the trouble is am running the Trust 80B 7. speakers which only came with the standard 4:4 cable.
I see from the Creative online store that the cable isn't available seperately, nor can I find one on eBay or trawling through lots of PC component websites.
The only way I can currently see of obtaining one is to buy a set of Creative speakers - which I refuse to do on principle, especially as there is nothing wrong with my existing set!
The reason I'm getting annoyed is essentially Creative have made sure their speakers are usable with any 7. soundcard by having the standard 4 jack inputs but have essentially ensured that most people using a creative 7. card have to also use creative speakers - all down to one wire, clever marketing but extremely annoying for users.
I'm very close to the point of returning the card to shop for a refund and reverting back to using my Fortissimo III instead - which is a shame as the quality is nowhere near as good on this much older card. I'll certainly think twice before recommending Creative cards to people with existing speaker systems.
Has anyone found a source of the cables or indeed a sensible work around?

I don't know what retailers might have that particular cable, but I do know we have them available for $6.99 currently. Just call tech support or Direct Sales for it, reference part number CB20320200053.
*IN THE US, I don't know about other regions, but call them anyways if need be.
DaleMessage Edited by Dale-CL on 07-25-2006 :49 AM

Similar Messages

  • Where to get the SSO ticket for a JCO-Connection from?

    Hey All,
    The szenario is, I've got a Java application and I want to connect to a SAP System. For this I want to use SSO. In the documentation of JCO I found this phrase:
    For SSO specify the user to be $MYSAPSSO2$ and pass the base64 encoded ticket as as the passwd parameter.
    Well... Now my question... Where to get this base64 ticket from? The problem is, I'm NOT using WebDynpro, it's a custom application running on client side. Now how to get the needed information? (PSE?)
    It would be great when you could give me a clue.
    Best regards,
    Kristian

    This linksactualy leads to the same place I mentioned where
    it installs the
    player over the Internet
    Another thing is that these players are said to be different
    for different
    browsers which means they are working together with a
    browser. I am looking
    for a player which allows to play SWF file directly, without
    a browser.
    I have such a player installed together with FLASH-8 - I am
    looking for
    such a player
    "DMennenoh" <[email protected]> wrote in
    message
    news:e2qgmu$t5r$[email protected]..
    > Does this help:
    >
    http://www.macromedia.com/shockwave/download/alternates/
    >
    > --
    > Dave -
    > Adobe Community Expert
    > www.blurredistinction.com
    > www.macromedia.com/support/forums/team_macromedia/
    >
    >

  • I have an iphone 2g unlocked for tmobile.  For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day.  It can't find tmobile on my phone?

    I have an iphone 2g unlocked for tmobile.  For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day.  It can't find tmobile on my phone for some reason but for 2 years previous it could no problem?  tmobile says it is a problem with my phone and not their service.
    Any ideas what to do?

    I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
    If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414).  You will be given the option to restore to that backup at the end of the restore process.  Your messages are stored in the backup so restoring to the backup will return the messages to your phone.  Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

  • Where can get version 10 of Elements 10? I have bought a new PC and need to load it.

    Where can get version 10 of Elements 10? I have bought a new PC and need to load it.

    Refer to this:
    Direct Download Links for Adobe Software
    Mylenium

  • How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room

    How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?

    Welcome to the Apple Community.
    Unfortunately the Apple TV doesn't have a web browser so you can't do that.

  • Where to get the source code of the owa_cookie.send procedure?

    I want to know where you get the source code of the owa_cookie.send procedure? I can only get the header of this package from ...\RDBMS\ADMIN\pubcook.sql. Could you paste the whole source code here and then I can modify it to set the 'httponly' attribute? I also have a problem that after changing the package, how to use the package I changed? Does it still a system package here? Or it has been changed to an user-defined package in database and I need to execute the package on the database for the web server?
    Thank you!

    Hi Arun,
    I am unable to see the pcui_gp components in the DTR ,I require this in order to get the source code of one of its component.
    Can you please tell me the step by step procedure getting those pcui_gp components from J2ee engine to the  dtr or  NWDI.
    If there are any documents on pcui_gp components exclusively please do forward to my mail id [email protected]
    Thansk and Regards,
    Anand.

  • Where to get the image file of directory and file icon??

    I've wrote a "file chooser" by my self and
    I need different icons to denote directories and
    files. Does anyone know where to get this icons??
    thanks

    use print screen and paste it in paint shop
    cut what you need

  • HT1338 why i'm not able to open pdf files? says i need adobe reader, but not sure where to get it.

    why i'm not able to open pdf files? says i need adobe reader, but not sure where to get it.

    Welcome to the Apple Support Communities
    You can use Preview to open PDFs. Right-click a PDF file and go to Open with > Preview

  • Where to get AS2 MDN xsd or dtd?

    Hi guys!
    I need to configure MDN receiving and as I go through Seeburger documentation, in the last chapter there is a scenario description, however, I don't know where to get xsd or dtd for creating interface for MDN messages. Any ideas?
    Thanx a lot! Peter

    Hi,
    The purpose of the MDN is to acknowledge the receipt of a payload message. An MDN contains machine-readable information on the delivery state of the payload message. E.g., it contains the message digest (MIC) of the payload message as calculated by the recipient. An MDN is optionally signed then the recipient can authenticate the sender of the MDN and check its integrity. A validly signed MDN combined with a valid MIC, reported by the MDN, can be used by the payload message sender to claim “non-repudiation of receipt” (NRR) of the payload Message.
    If the MDNs are processed in the XI system, this flag must be set to “Refer to XI System”. The adapter will then create an acknowledgment report message containing some information on the acknowledged document.Important: In case “Refer to XI System” is selected, a <b>sender channel with message protocol ‘Reports’ and a sender agreement for the generated acknowledgment report messages</b> (refer to the paragraph “Sender Message Channel (Inbound Processing)”) have to be configured. In case of asynchronous MDN mode, an Report channel and Sender agreement always have to be configured also when “Refer to XI system” is disabled!
    Also see section of Document
    <b> Case B: Receiving the Acknowledgment Report (Optional) For this purpose, set the “Handle received MDN” flag of the AS2 channel to “Refer MDN to</b>
    Regards,
    Akshay Jamgaonkar.
    Reward points if find useful.
    Also mark question answered if solved.

  • Where to get the BusinessObjects Enterprise SDK - Java Libraries

    Hi All,
    I have installed the Crystal Report Server XI R2 but where to get the java sdk that I will use in my client j2ee web application?
    These are the folders in my CR Server directory.
    /BusinessObjects Enterprise 11.5
    /Business Objects/common/3.5/java/lib
    It seems that I will get the jar from this folder but what are those jars?
    /Business Objects/common/3.5/java/lib
    What are the list of jars that my client web application used?
    Basically in doing my POC work I need these library imports
    <%@ page import="com.crystaldecisions.sdk.exception.*"%>
    <%@ page import="com.crystaldecisions.sdk.framework.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.infostore.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.managedreports.*"%>
    Thanks in advance.
    Regards,
    Rulix
    Edited by: Rulix Batistil on Nov 4, 2008 11:38 AM

    Hi Rulix
    From the packages that you have included ,it seems that you are using managed RAS SDK for the functionality that you want to implement.
    Here is a listing of the JAR files that you would require in your RAS application. Please note that you would require the enterprise jars and the Crystal connection jars.
    - boconfig.jar
    - cecore.jar
    - celib.jar
    - ceplugins.jar
    - cereports.jar
    - certj.jar
    - cesession.jar
    - ceutils.jar
    - cexsd.jar
    - Concurrent.jar
    - corbaidl.jar
    - CRDBJavabeansServer.jar
    - CRDBJavaServer.jar
    - CRDBJavaServerCommon.jar
    - CRDBJDBCServer.jar
    - CRDBXMLExternal.jar
    - CRDBXMLServer.jar
    - crlov.jar
    - crlovexternal.jar
    - crlovmanifest.jar
    - ebus405.jar
    - freessl201.jar
    - icu4j.jar
    - jaxrpc.jar
    - jrcadapter.jar
    - jrcerom.jar
    - jsafe.jar
    - jtools.jar
    - log4j.jar
    - MetafileRenderer.jar
    - pullparser.jar
    - rasapp.jar
    - rascore.jar
    - rpoifs.jar
    - saaj.jar
    - Serialization.jar
    - sslj.jar
    - u211java.jar
    - URIUtil.jar
    - webreporting.jar
    - xbean.jar
    - xercesImpl.jar
    - xml-apis.jar
    Hope this helps you.
    Thanks
    Soni

  • Where to get 1.4.2._04 JVM?

    Sun had a maintainence release 1.4.2._04 on March 10, 2004. However, the official download site for 1.4 J2SE (http://java.sun.com/j2se/1.4.2/download.html) still points to the previous version 1.4.2_03.
    What's more confusing is that, when I did a google search on 1.4.2_04 SDK download, google has a "cached" page which DOES point to 1.4.2_04 (the google cache timestamp is March 22). It seems that Sun has published 1.4.2_04 download at one time, but later reverted back to 1.4.2_03.
    Does anybody know where to get official 1.4.2_04 J2SE SDK, or when it will be available for public download? Is it stable?
    Also, I downloaded 1.4.2_04 SDK following Google's cached page:
    http://66.102.7.104/search?q=cache:anGj0_-PWb4J:java.sun.com/j2se/1.4.2/download.html+j2sdk+1.4.2_04+download&hl=en&ie=UTF-8. Is this the official version?
    Anyone with 1.4.2_04 VM experiences please share your opinions.
    Thanks.
    Yan

    Yeah, it was there last week, but it seems to have vanished :-(
    There is a discussion about it's disappearance here:
    http://forum.java.sun.com/thread.jsp?forum=17&thread=506253&tstart=0&trange=15
    And it has been spotted by javalobby too:
    http://javalobby.org/
    http://javalobby.org/thread.jspa?forumID=61&threadID=11985
    I hope Sun clear this up... And I also hope that this is a website problem, not a problem with _04 :-(

  • 8i: where to get on-line docs?

    Does anyone know where to get the on-line docs that usually come
    as part of an Oracle Server install? They don't appear to come
    with Linux download or CD.
    I found the extensive PDF docs in the Technet documentation
    section. They are nice BUT Netscape/Acrobat appears to have some
    problems browsing large PDF files AND I have gotten very use to
    using the HTML based docs that came with my Oracle 7.3.4. I'm
    hoping the equivalent docs are available (or will be available)
    for 8i on Linux.
    Alternatively, if Oracle could produce the PDF's with the
    deliver "page-at-a-time" features enabled the PDF's would be
    easier to use.
    R.Parr
    Temporal Arts
    null

    Thanks For the questions Kmac, and willingness to help.......!
    Answering the Qoestions in order:
    you've had these two working together before? NO
    have you tried resetting the modem? YES
    manage the PPoE settings in network setup? NO (not a clue what that means)
    can you get to the modem set up page? YES (no listing for the ActionTec DSL modem (from Quest))

  • Using PS CS1 & a Canon EOS Rebel T3i. Where to get the plug-in to use camera raw?

    Using PS CS1 & a Canon EOS Rebel T3i. Where to get the plug-in to use camera raw?

    Thank you.
    Windows 7 Starter
    on a Toshiba NB505
    Intel Atom CPU [email protected]
    This is my internet notebook access device.
    My primary system is MS Windows 5.1, with a flat screen crt.
    Does this help?
    Want to use RAW, can't afford to upgrade equipment just yet.
    Thanks again for any guidance offerer
    Michael
    Connected by DROID on Verizon Wireless

  • BB Pearl 3G "topless" - where to get?

    Hi together,
    my BB Pearl 3G 9105 has lost the black top thing with the media buttons on it
    It looks kind of sad to see just the white innings of the Blackberry, so anyone knows where to get that piece of plastic?
    Thanks in Advance
    GJ83

    No one?

  • Any ideas on where to get a reasonably priced SSD in Aussie?

    I have no experience with hardware but I want to get a 2.5 inch SATA SSD to replace a HDD in my 2011 winter/fall MBP. Any ideas on where to get one in Australia for a reasonable price? I'm looking for about 550GB give or take.

    ebay?

Maybe you are looking for