Where to get a binary package that will give library libiconv.so.2

Hello
I have installed MediaWiki on Solaris Express build 105. When someone's try to login to MediaWiki through web browser there is a error about encoding. Function iconv() is installed but there is no library for this extension. Without this library my computer can not do convert a non utf encoding to utf encoding so mostly 'windows' hosts can not do proper login. Error message says "password is wrong. try again".
Software that i used to install Mediawiki: apache2.2, mysql 5.0, php5.2
Where to get a binary package that will provide a library libiconv.so.2 or something ??
What to do to get it working ??
Thanks for any response

There is no need to install this library. I have made mistake. When i was doing copy-paste a password from OpenOffice then this password did not mutch with password that was type by hand into firefox. Only this was the problem.

Similar Messages

  • I am trying to get a speaker dock that will play my nano 6 generation by using the remote control. So far I have not found one where the remote works. Does anyone know if they are made?  peterorpington

    I am trying to get a speaker dock that will play my 6thgen ipod by using the remote.So far I have not found one . Does anyone know if there is one that is made for the 6th gen?

    Sheesh. That looks hard. I think it will fall over at this point:
    "Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
    Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
    With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
    I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

  • I had a belkin keyboard for my old iPad.  I have upgraded to an iPad air.  Can I get a new case that will allow be to use my old keyboard?  How?

    I had a belkin keyboard for my old iPad.  I have upgraded to an iPad air.  Can I get a new case that will allow me to use my old keyboard?  How?  Where?

    You might look for generic cases. They're not as sturdy or durable as custom made ones - they tend to use elastic to hold in the iPad and keyboards - but that elastic does give them some flexibility.
    Or see if Belkin has anything.
    Or you may simply be out of luck with the compatibility. My Keyboard is in a case custom built for my 2 and I know whatever tablet I replace my iPad with I'll be getting a new keyboard as well because it most likely won't fit in a new case.

  • How do I remove google redirect virus??? I can't get onto any sites that will offer help - as they're all "redirected!!"

    I've got a GOOGLE REDIRECT VIRUS, and am not able to enter any websites that will give removal information - as I'm being REDIRECTED! I need to know the name of the file to remove...and where/how!!! Any/ALL internet inquiries for assistance are....being redirected/hijacked. HELP.
    == This happened ==
    Every time Firefox opened
    == yesterday.

    This malware is actually in your add-ons. Go to Tools in your browser and click Add-ons and see if there are any add-ons that you didn't install. Mine was called '''XUL Cache''' that added itself. I uninstalled it and the problem was gone but the addon can have different names.

  • I often get emails with attachments that will not open with my mac. Is there any free software to help this

    I often get emails with attachments that will not open with my mac often a small ? will show. How do I open these

    What kind of attachment? Post an example file name.

  • I recently upgraded to Lion on an iMac and I am trying to run Garageband but get message telling me that the instrument library is invalid and I should choose a valid Instrument Folder or re-install Garageband. Where do I find such a folder?

    I recently upgraded to Lion on an iMac and I am trying to run Garageband but get message telling me that the instrument library is invalid and I should choose a valid Instrument Folder or re-install Garageband. Where do I find such a folder?

    Thanks very much. Yes, I am using the installer files and serial number from the URL you referenced above. I have spent many hours trying to get it to work. I would love some help!!
    The problem is that the instructions that come in the pdf with the downloaded files do not work, because the files that download from that page do not have the names referred to in the pdf, and most of the things that are referred to in the instructions do not happen. Here is what actually happened.
    When I downloaded the files from the website, these are the files that downloaded:
    I double-clicked each one and they extracted into two different folders.
    Then I read a message on the forum that said to move all the extractred files into the same folder, so I moved all files into one file at C:\Creative Suite CS2\Adobe Creative Suite 2.0 as was pictured in the forum message. Here are screen shots showing all of the files in that folder I have now:
    So then I double clicked the "Setup" file and I got this error message:
    So then I tried to install the programs separately from the installer inside the folders Photoshop and Illustrator. I got this far and entered the serial number from the website:
    But then I got this error message, even though I was using the files and serial number exactly from the website:
    I tried both photoshop and illustrator and the same thing happened.
    (I also looked at Solution 2 that you mentioned above but I don't have anything called VCOM on the computer. Also the error message that I got is not that one.)
    I think I really need a set of instructions that lists the steps in order to do, but based on the files that actually download from the website and what happens when you extract the files. I feel as if I have all of the proper files but it still doesn't work.
    Thank you very much!

  • I have a 21" Samsung monitor that needs 1680x1050 resolution.  Do not have in my 13" MacBook Pro os 10.8.2.  Can I get app that will give me monitor resolution

    I have a 21" Samsung monitor that needs a 1680x1050 resolution connected to a 13" MacBook Pro os 10.8.2.  My display preferences do not offer this resolution.  Is there an app. that will give me this resolution or other way to solve this problem.  Thanks,  JHM

    Uninstall Genieo:
    http://www.thesafemac.com/arg-genieo/
    See if that makes a difference.
    Ciao.
    DawnHerbie wrote:
    Also is Safeboot ok to use?
    Yes, it will do no harm, but it is meant for trouble shooting and you should not have to use it all the time.
    Message was edited by: OGELTHORPE

  • Is there a command i can run that will give me the serial number

    is there a command i can run that will give me the serial number on solaris-9

    Imtiaz77 wrote:i got it thankx
    root@sunfire2# sneepThat only works if ...
    1) you know about SNEEP
    2) you hardware is compatible
    3) you install it and configure it properly
    The answer to your original quetion is:
    No, there is nothing already in Solaris 9 that lets you type a command and get a serial number.

  • Hi, I live in the UK and have an ipad2 with wifi (no 3G). I plan to visit Canada in the summer and want to know how i can access the internet while i'm away e.g. can i purchase a 3G attachment that will give me access on a pay as you go basis. Thanks.

    Hi, I live in the UK and have an ipad2 with wifi (no 3G). I plan to visit Canada in the summer and want to know how i can access the internet while i'm away e.g. can i purchase a 3G attachment that will give me access on a pay as you go basis. Thanks.

    You can get Mifi devices (the iPad connects to it via wifi and they then give access to 3G networks). I've never used one and I don't know if they are available in Canada (and if so how much they would cost). If you have an iPhone then you could also use that as a mobile hotspot

  • I am getting an error message that indicates /system/library/extensions/OnUSBMassStorage.kext was installed improperly.  How do I fix this?

    I am getting an error message that indicates /system/library/extensions/OnUSBMassStorage.kext was installed improperly.  How do I fix this?

    First off, you are running an intel not a PPC.
    Second have you attached a USB external drive to your computer?  Remove all peripherals and see if the message goes away.  Then reattach each peripheral one by one to weed out the problematic one.

  • What is the most sensible way to extend a wifi signal. I am in a cinderblock house and I have to buy something that will give me a single network but added range from my airport extreme base station.

    What is the most sensible way to extend a wifi signal. I am in a cinderblock house and I have to buy something that will give me a single network but added range from my airport extreme base station.

    Use an Airport Express. Configure the AEBS to allow it's wireless network to be extended. This is a dropdown menu option under the Wireless tab. Configure the Airport Express to Extend an Existing Network also under it's Wireless tab. You will need to provide the name of your network used in the AEBS as well as the network's access password.

  • Is there an app that I can purchase that will give me Wi-Fi?

    Is there an app I can purchase that will give me Wi-Fi?

    Your iPod touch already has Wi Fi.
    Tap Settings > Wi-Fi
    http://www.apple.com/support/ipodtouch/wifi/

  • Where can I find a tax preparation software package that will handle S corp forms?

    I am getting ready to do my taxes and was going to try to do them myself this year.  Seems I can't find a small inexpensive package that runs of the MAC that will handel S corporation preparation.  Can any one direct me?

    Tax Software for business entities 1120, 1120S, LLC, 1041, etc. is only available in Windows Version. Try Google for 1120S forms & instructions. If You are Sole Owner of LLC or 1120S, You can fill out 1040C form since all info passes through your 1040 anyway.

  • I recently bought Photoshop Elements 12 and the system is saying that the Redemption Code is no longer active.  How do I get a new code that will allow access to the software ?

    I recently bought Photoshop Elements 12 and the system is telling me that the Redemption Code is no longer active.
    How do I get a new Code number that will allow met to access the software?

    you need your serial number.  you used your redemption number to redeem your serial number.
    if you don't know your serial number, check the account used to purchase or register your pse 12, Adobe ID

  • How do I create a package that will install a shell script?

    From various sources I have made this shell script which creates a hidden admin user, starts ard and sshd.
    I would like to make this a package which will run on a machine on first boot. (I'm using deploystudio to deploy ML)
    It creates a hidden user called testuser1 with the password of password1
    [code]# Create user record in directory services
    dscl . -create /Users/testuser1
    dscl . -create /Users/testuser1 RealName "testuser1"
    dscl . -create /Users/testuser1 UniqueID 401
    dscl . -create /Users/testuser1 PrimaryGroupID 20
    dscl . -create /Users/testuser1 UserShell /bin/bash
    dscl . -passwd /Users/testuser1 "password1"
    # Set up a hidden home folder
    dscl . -create /Users/testuser1 NFSHomeDirectory /var/testuser1
    cp -R /System/Library/User\ Template/English.lproj /var/testuser1
    chown -R testuser1:staff /var/testuser1
    # Grant admin & ARD rights
    dseditgroup -o edit -t user -a testuser1 admin
    /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/ki ckstart -activate -configure -access -on -users testuser1 -privs -all -restart -agent
    # Tell loginwindow not to show the user
    defaults write /Library/Preferences/com.apple.loginwindow Hide500Users -bool TRUE
    # Alternate: defaults write /Library/Preferences/com.apple.loginwindow HiddenUsersList -array testuser1
    # start remote login ssh
    systemsetup -setremotelogin on[/code]
    I'm using package maker but it keeps failing. If I add it from somewhere like my Documents dir it says it will give my username the permissions instead of root. If I add it from / and make root the owner packagemaker errors probably because my user doesn't have the rights to it. I want it to copy somewhere then maybe have another script that copies to the same location and does an rm to remove the previous script so no admin details are left on the machine

    Basicilly I want to roll out an image that will work with all models of macs which are comaptible with Mountain Lion. To do so I'm using deploystudio with the installESD.dmg as the image. This way it will install the relevant drivers for each model of mac. So the image should work whether it's a mac pro tower/mac mini/macbook.
    Upon completetion deploystudio lets you run packages so I would like the script above to be in a package. I don't want it even to copy the script anywhere I would just like it to run the .sh file I've made if thats possible?
    I'm just not sure what steps to take with packagemaker, I've never used it before.
    But yeah the ultimate goal is: upon installation completetion setup hidden admin user that will have ssh and ard access.

Maybe you are looking for