Where to get quicktime X?

i have mac os x 10.5 i bought my macpro last year september and i just realize just now that i dont have the quicktime X!
and i cant even download that version here at apple.
i just really need the screen recording. i have the screenflow but i dont want to pay to get the full version.
please please help me T.T

What about if we donwnloaded Snowleapord from the web on Apple's site
You cannot download Mac OS X 10.6 from Apple. You can download updates, but not the full operating system installer which you'll need to get back QuickTime Player X.
Any way to get Quicktime X again?
http://discussions.apple.com/thread.jspa?messageID=11372174&#11372174

Similar Messages

In attempt to burn blu-ray, I get QuickTime error 0. Takes hours to export a 7 minute movie from timeline, then get notice it fails. What's going on here?

New problem just started 24 hours ago. When I try to export from the time line to create a QuickTime file, a 7 minute movie on time line takes 3 hours to export and then the export fails, where as a few days ago, that export would take about 10 minutes at most. I get the same failure notice when I try to share to blu-ray, DVD, or Vimeo. Tried to use compressor, no such luck as compressor failed to make a .mov file. I get QuickTime error 0 message about 5 minutes into trying to share to Blu-Ray now. Does anyone know what is going on here? I'm running latest update of Snow Leopard on an intel Mac Pro and the latest update to Final Cut Pro X. I've also installed QT 7.6.6 to use in creating time lapse movie files.

Same problem here, too. Final Cut Pro X 10.0.3 on OS 10.6.8. However, it is only doing it on ONE of my projects. A 4-second test project burned successfully.
I'm actually going to use iDVD to burn copies for a few people, so I only need the movie file from FCPX.
Would someone please post best export settings for use on a DVD? In FCPX, the project is in HD (1080p) with all media optimized to ProRes 442. I know it will have to be down-sampled to DVD resolution, but I've always been curious to know what settings will result produce the best possible quality in DVD resolution.
Thank you!
Bart

How can I get Quicktime to open my WMA file- it says a required codec is not available

How can I get Quicktime to open my WMA file- it says" a required codec is not available"?

please jon, where I can find those "Flip4Mac" codec packages?
Gp to http://www.telestream.net/flip4mac/ to see a comparison list of codec components available and what each set can do.

How can I get quicktime pro 7 running

I bought quicktime pro 7 a couple of years ago and have a registration code. At the time I used the program to make some time lapse movies. I'd like to make a couple of time lapse movies again but quicktime pro 7 is no where to be found. This probably ha something to do with updating the os between then and now. The question is how can I get quicktime pro 7 running again? The unlocking instructions I have for quicktime pro 7 that I received with the key do not correspond with what the system preferences now show. Any assistance would be appreciated. I am currently running OS X version 10.9.5 on an older iMac.

Open the QuickTime 7 player(if it’s not installed, click here), choose Registration from the QuickTime Player 7 menu, and supply your key there.
(115130)

"Get QuickTime-Free Download" badge

Hi folks,
Try as I may I cannot find on the QT site where to download the small badge which instructs visitors to get QuickTime.
The badge looks like the one found here:
http://www.pbs.org/wgbh/nova/novatech.html#quicktime
Any ideas?
Thanks in advance
Frank

David,
I had already tried saving the image but for some reason it is blurry when i insert it in iWeb.
All is not lost however! By Googling (should have thought of this from the beginning) "Get QuickTime" badge it gave me the link I was seeking:
http://www.apple.com/about/webbadges/
It's s shame though that one can't find this directly on Apple.com: you have to click on Site Map then scroll to Additional Info to find webbadges.
Thanks for your input however,
Frank

Cannot get Quicktime (OR Itunes) to install/work

I have had many headaches trying to get Quicktime to work over the past month. I have looked through the forums, uninstalled the program, as well as all the Apple stuff, using a program that would force the uninstall since windows could not do it. I cannot do a Windows restore because the restore point does not go back far enough... If I could just get quicktime to work, I would be happy since so many things require it. Here is what it tells me this time: "The configuration data for this product is corrupt. Contact your support personnel"
So... What options do I have other than formatting my dard drive. I would rather not do that...
Thanks,
-Brett

I tried installing an old version but it says that a newer version of quicktime is already installed.
Okay ... if there's no QuickTime showing in your "Uninstall a program" control panel, and you're getting that message, that usually indicates damage to the QuickTime.msi or related installation componentry.
Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try reinstalling iTunes again. Does the install go through properly this time? If so, are you able to launch iTunes without the error message?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Where to get the SSO ticket for a JCO-Connection from?

Hey All,
The szenario is, I've got a Java application and I want to connect to a SAP System. For this I want to use SSO. In the documentation of JCO I found this phrase:
For SSO specify the user to be $MYSAPSSO2$ and pass the base64 encoded ticket as as the passwd parameter.
Well... Now my question... Where to get this base64 ticket from? The problem is, I'm NOT using WebDynpro, it's a custom application running on client side. Now how to get the needed information? (PSE?)
It would be great when you could give me a clue.
Best regards,
Kristian

This linksactualy leads to the same place I mentioned where
it installs the
player over the Internet
Another thing is that these players are said to be different
for different
browsers which means they are working together with a
browser. I am looking
for a player which allows to play SWF file directly, without
a browser.
I have such a player installed together with FLASH-8 - I am
looking for
such a player
"DMennenoh" <[email protected]> wrote in
message
news:e2qgmu$t5r$[email protected]..
> Does this help:
>
http://www.macromedia.com/shockwave/download/alternates/
>
> --
> Dave -
> Adobe Community Expert
> www.blurredistinction.com
> www.macromedia.com/support/forums/team_macromedia/
>
>

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone?

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone for some reason but for 2 years previous it could no problem? tmobile says it is a problem with my phone and not their service.
Any ideas what to do?

I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

Where can get version 10 of Elements 10? I have bought a new PC and need to load it.

Where can get version 10 of Elements 10? I have bought a new PC and need to load it.

Refer to this:
Direct Download Links for Adobe Software
Mylenium

How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room

How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?

Welcome to the Apple Community.
Unfortunately the Apple TV doesn't have a web browser so you can't do that.

Where to get the source code of the owa_cookie.send procedure?

I want to know where you get the source code of the owa_cookie.send procedure? I can only get the header of this package from ...\RDBMS\ADMIN\pubcook.sql. Could you paste the whole source code here and then I can modify it to set the 'httponly' attribute? I also have a problem that after changing the package, how to use the package I changed? Does it still a system package here? Or it has been changed to an user-defined package in database and I need to execute the package on the database for the web server?
Thank you!

Hi Arun,
I am unable to see the pcui_gp components in the DTR ,I require this in order to get the source code of one of its component.
Can you please tell me the step by step procedure getting those pcui_gp components from J2ee engine to the dtr or NWDI.
If there are any documents on pcui_gp components exclusively please do forward to my mail id [email protected]
Thansk and Regards,
Anand.

Can't get Quicktime to work on my laptop, Windows 8.1

Can't get Quicktime to function on my laptop, Windows 8.1 Need a solution to this problem!

Hi there Catching Fire,
If you are experiencing issues installing Quicktime, you may find the article below helpful.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
-Griff W.

Where to get the image file of directory and file icon??

I've wrote a "file chooser" by my self and
I need different icons to denote directories and
files. Does anyone know where to get this icons??
thanks

use print screen and paste it in paint shop
cut what you need

HT1338 why i'm not able to open pdf files? says i need adobe reader, but not sure where to get it.

why i'm not able to open pdf files? says i need adobe reader, but not sure where to get it.

Welcome to the Apple Support Communities
You can use Preview to open PDFs. Right-click a PDF file and go to Open with > Preview

Where to get AS2 MDN xsd or dtd?

Hi guys!
I need to configure MDN receiving and as I go through Seeburger documentation, in the last chapter there is a scenario description, however, I don't know where to get xsd or dtd for creating interface for MDN messages. Any ideas?
Thanx a lot! Peter

Hi,
The purpose of the MDN is to acknowledge the receipt of a payload message. An MDN contains machine-readable information on the delivery state of the payload message. E.g., it contains the message digest (MIC) of the payload message as calculated by the recipient. An MDN is optionally signed then the recipient can authenticate the sender of the MDN and check its integrity. A validly signed MDN combined with a valid MIC, reported by the MDN, can be used by the payload message sender to claim non-repudiation of receipt (NRR) of the payload Message.
If the MDNs are processed in the XI system, this flag must be set to Refer to XI System. The adapter will then create an acknowledgment report message containing some information on the acknowledged document.Important: In case Refer to XI System is selected, a <b>sender channel with message protocol Reports and a sender agreement for the generated acknowledgment report messages</b> (refer to the paragraph Sender Message Channel (Inbound Processing)) have to be configured. In case of asynchronous MDN mode, an Report channel and Sender agreement always have to be configured also when Refer to XI system is disabled!
Also see section of Document
<b> Case B: Receiving the Acknowledgment Report (Optional) For this purpose, set the Handle received MDN flag of the AS2 channel to Refer MDN to</b>
Regards,
Akshay Jamgaonkar.
Reward points if find useful.
Also mark question answered if solved.

Where to get quicktime X?

Similar Messages

Maybe you are looking for