Where to get the image file of directory and file icon??

I've wrote a "file chooser" by my self and
I need different icons to denote directories and
files. Does anyone know where to get this icons??
thanks

use print screen and paste it in paint shop
cut what you need

Similar Messages

  • When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and  sit next to the original? Mine is going to the end of the folder. Thanks Karen

    When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and sit next to the original image? Mine is going back to the end of the folder. Thanks Karen

    Hi Karen
    You may the sort set to Custom. Click the dropdown menu on the toolbar (to the right of the word sort) and change to capture time.
    If you can’t see the toolbar above the filmstrip press the T key. Press T again to hide.

  • Name of the table where can get the two fields Valid-From and Valid-to for

    Hi gurus
    I want name of the table where I can get the two fields Valid-From and Valid-To and their relation ship with the header table in BOM
    Regards
    Kaisar

    You can only get the Valid from date from the table STKO.
    To get the valid to date, you have to take one day less than the valid-from date of the next record for the same BOM.
    Alternatively use the Function module:
    CSAP_MAT_BOM_READ
    It will give both valid from and valid to dates in the tables parameter: T_STKO
    Regards,
    Ravi
    Edited by: Ravi Kanth Talagana on Jul 2, 2008 4:37 PM

  • Where to Get The Windows 7 Home Premium .iso File for Pre installed OEM of Windows

    Hi Everyone, Need help here, please..Here is the situation, i want to upgrade my current pre-installed OS (Win 7 x64) Home premium in my laptop HP ENVY 4-1013tx Notebook PC to Windows 10. I'ts fine in the beginning until it shut down because of heat problem. When i try to turn it on, BSOD appeared. I've try to run in safe mode with have no luck, the same BSOD still appeared.I decided to recover it but no OS was detected in recovery mode. I browsed for many forums and they said that my HDD got bad sector so I remove my hdd from the laptop and attached it on my PC and run chkdsk but didn't solve the problem (chkdsk error : an unexpected error occured).So the last thing I've done was to format the HDD and install a clean Windows 10 and can not activate it without the product key. I just want to go back to my Win 7 and want to upgrade it to Win 10 again. Can I get the iso file ? My Product is B4P83PA#AR6 Thank You

    Here You Go: http://www.microsoft.com/en-us/software-recovery

  • Get the filename from a directory and insert into a table

    Hi,
    I have a requirement, i need to read the file name from a Linux directory and get that file name into a variable,
    After that i need to insert that file name into a table.
    EX: let their is a file1.txt in abc directory , and i read that "file name" into v_file_name variable and i am going to insert that file name into a table.

    You should have something common in all your file name that can be used to distinguish between them.
    Ex: Suppose file names are like FILENAME_PKG1,FILENAME_PKG2,FILENAME_PKG3 then it will be easier to develop the logic inside ODI so that FILENAME_PKG1 can be processed by package1 ,FILENAME_PKG2 can be processed by package2 ,FILENAME_PKG3 can be processed by package3.
    Hope you got, what i want to say.
    Thanks.

  • Which directory do Siebel thick client get the image file

    Hi
    My colleague had created a new picture file and uploaded into the server. In order for my thick client works properly I have to get the picture and put inside my local.But exactly where is the directory?
    My siebel thick client is install in this default directory C:\Siebel\8.1\Client_1
    I believe that the C:\Siebel\8.1\Client_1\PUBLIC\enu\images is where siebel would get the images. But is not showing in my thick client. Perhaps im wrong. Or am I missing out something. And the picture is for eChannel Partner Portal
    Thanks

    Hello,
    By any chance is the browser setting for downloading images disabled? Just have a look. It is somewhere in IE settings (don't ask where as I myself get lost in those settings) :)
    In case that is not the issue then as a last resort delete temporary interenet files and clear cache for IE. Then go to the Downloaded Installations folder inside the Windows directory and delete all the ActiveX controls that are in any way related to Siebel. They will get reinstalled once you start up thin / thick client again so do not worry about that.
    Warm Regards,
    Tanmay Jain

  • HT200285 I want to change my wallpaper to an image that was available before I upgraded to IOS 8.1.3 - a close-up image of long reedy  grasses with hazy light in the background. Greyish hues. Where can find the image & how do I get it back on my phone?

    I want to change my wallpaper to an image that was available
    before I upgraded to IOS 8.1.3 - a close-up image of long reedy  grasses with hazy light in the background.
    Greyish hues. Where can find the image & how do I get it back on my phone?

    I want to change my wallpaper to an image that was available
    before I upgraded to IOS 8.1.3 - a close-up image of long reedy  grasses with hazy light in the background.
    Greyish hues. Where can find the image & how do I get it back on my phone?

  • Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll     Verify that you have access to that directory."

    Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll     Verify that you have access to that directory."

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • How to use sdk to get the image in the pdf file created by illustrator?

    I have some pdf files create by illustrator and saved as pdf documents,
    now I want to use the sdk to get the image in pdf files.
    how to?
    Thanks.

    Thank you first!
    Yes,you are right,since I am new to illustrator,and I want to try to write a plugin,
    I have read the sdk doc and API and opened the sample in vs2010,but no idea about how to operate the pdf doc in illustrator with api.
    Hope more advise or any examples,thank a lot.

  • How can I get Directory and Files from a Maped Networkdrive of the AppS

    Hello,
    we have the following Situation.
    We have a Windows-Server (Server-A) in an Network with ActivDirectory and an Windows-Server (Server-B with an WebApplicationServer outside of these ActivDirectory as standalone.
    On Server-B we mapped a Directory from Server-A (FileExplorer and then MapNetworkDrives) as Drive Q.
    Now i tried to get the Directory of Q:\abcd but it doesn't work.
    I tried the FM EPS_GET_DIRECTORY_LISTING and also RZL_READ_DIR, but both doesn't worked.
    RZL_READ_DIR is doing a "CALL 'ALERTS' ..." and is comming back with sy-subrc = 1
    EPS_GET_DIRECTORY_LISTING is doing a "CALL 'C_DIR_READ_FINISH'..." and comes back with "Wrong order of calls" in the Field file-errmsg. Next Call is "CALL 'C_DIR_READ_START'..." and this comes back with "opendir" in Field file-errmsg.
    I tried the same with two Servers in the same ActivDirectory-Network. The Result was the same, i don't get the directory of the mapped drive. But now i get from the Call "CALL 'C_DIR_READ_START'..." the file-errmsg "opendir: Not a directory" and file-errno 20.
    Is there any idea for solving my Problem?
    I have to get this directory, read the files from the List and have to rename them after wriing the data to our databasefile.
    I want to read them with OPEN DATASET, rename them by writing a new File (also OPEN DATASET) and after that i do an DELETE DATASET.
    Thanks and Greetings Matthias
    Edited by: Matthias Horstmann on Mar 25, 2009 4:12 PM
    Filled in Scenario with 2 Servers in same AD-Network

    Halo Mattias,
    i using this function get file file name and directory:
    at selection-screen on value-request for p_file.
      call function 'F4_FILENAME'
        exporting
          program_name  = syst-cprog
          dynpro_number = syst-dynnr
          field_name    = 'P_FILE'
        importing
          file_name     = p_file.
    Rgds,
    Wilibrodus

  • In MIRO transaction, Where will be the image path get stored?

    Dear Friends,
    In MIRO transaction, Where will be the image path get stored?
    There must be some standard tables/functionality which is maintaining PATH. Please help me to find out the Document Path Details..
    Thanks in Advance.
    Regards,
    Lijo

    Hi,
    this is the content of the oss note (hope it helps):
    Symptom
    Where are the documents that you can create and display using the generic object services (System -> Connections or System -> 'Services for the object') physically stored?
    Solution
    Storing attachments using generic services
    The generic object services offer a separate option via the 'Copy desktop document', 'Connect Internet address (URL)' and 'Create a note' services to add an attachment to a business document.As of Release 4.6C, these services are called 'Create attachment', 'Create an external document (URL)' and 'Create a note'.
    These services should enable the end user to easily enter attachments without document characters (memos).Correspondingly, there is no archiving concept for this type of attachment.
    Technically speaking, notes, PC attachments and URLs are treated as SAPoffice documents and result in corresponding entries in the SOOD and SOFM tables. The contents of the attachments are stored in the SOC3 table.As of Release 4.6B, the contents of PC attachments are stored using the Knowledge Provider (KPro).The KPro allows you to connect an external storage system so that the contents of the PC attachments no longer place a burden on the database. If an external storage system is not connected, the contents of the PC attachments are written to the SOFFCONT1 table as of Release 4.6B.The administrative information necessary to locate the document in the Kpro is in the SOC3 table.
    The content of notes and URLs continues to be stored in the SOC3 table.As these documents are usually small, the additional effort involved in storing them in the KPro is not justified.
    If the PC attachments are not to be stored in the SOFFCONT1 table, you must assign a category to the SOFFPHIO document class using transaction SKPR08. The category is created in transaction OACT and refers to a repository on a HTTP content server. If documents that have already been stored are to be moved to the content server, see note 389366.
    For more information on connecting an external Content Server, see the online documentation for the SAP Knowledge Provider or the information available in the help portal under Basis -> Basis Services -> Business Workplace -> Administration of... -> Information on Documents... -> Configuring an HTTP Content Server for Documents.
    The relationship between the attachments and the business documents is provided via the Object Relationship Service.
    Defining attachments using the archive link
    If an optical archive was connected using the archive link and the corresponding settings for the document type were maintained for the object types of a business document, documents can be stored in the Content Repository, directly from the PC, via the 'Establish relationships for the stored document' or 'Store the business document' service.
    In addition, refer to the online documentation for more information on configuring the archive link.
    Best regards.

  • Problem in getting the image through URL

    hi all,
    I facing the problem,Inwhich i am unable find the solution...I am using the following code to display the image
    public void doGet(HttpServletRequest request,HttpServletResponse response)
                        throws IOException, ServletException {
                   int data=0;
                   response.setContentType("image/png");
                   ServletOutputStream out = response.getOutputStream();
                   String file = request.getContextPath()+imageNames[0];
                   //String file = "C:/Program Files/Apache Group/Tomcat 4.1/webapps/ImageComm/WEB-INF/images"+imageNames[index];
                   BufferedInputStream in = new BufferedInputStream(new FileInputStream(file));
                   System.out.println("the size of the inputStream is..."+in.available());
                   System.out.println("the context path is..."+request.getContextPath());          
                   while ((data = in.read()) != -1) {
                   out.write(data);
    with the above i am not getting any error at the compile time but it was giving exception like FileNotFoundException.
    but the same thing(URL address) when i am copying on the browser it was displayig the image.
    (what might be the reason)
    one more thing when i commented on the url address and try to use the actual realpath address it was displaying the image with out any problem
    can anybody give me the solution like where to keep my images by which i can able to get the images through url address
    thanks in advance
    lakshman

    hi all,
    I am getting the image from the server.but the problem is i am getting the Exception as ArrayOutOfBound exception.
    It was displaying the Image for the first time.and when ever it was going for the second time in to the paint method it was displaying the IOException in reading the stream from the connection.
    can anybody give me the solution in rectifying that exception.
    thanks in advance
    lakshman

  • Programming help - how to get the read-only state of PDF file is windows explorer preview is ON?

    Programming help - how to get the read-only state of PDF file is windows explorer preview is ON?
    I'm developing an application where a file is need to be saved as pdf. But, if there is already a pdf file with same name in the specified directory, I wish to overwrite it. And in the overwrite case, read-only files should not be overwritten. If the duplicate(old) file is opened in windows (Win7) explorer preview, it is write protected. So, it should not be overwritten. I tried to get the '
    FILE_ATTRIBUTE_READONLY' using MS API 'GetFileAttributes', but it didn't succeed. How Adobe marks the file as read-only for preview? Do I need to check some other attribute of the file?
    Thanks!

    Divya - I have done it in the past following these documents. Please read it and try it it will work.
    Please read it in the following order since both are a continuation documents for the same purpose (it also contains how to change colors of row dynamically but I didnt do that part I just did the read_only part as your requirement) 
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0625002-596c-2b10-46af-91cb31b71393
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0155eb5-b6ce-2b10-3195-d9704982d69b?quicklink=index&overridelayout=true
    thanks!
    Jason PV

  • Where to get the BusinessObjects Enterprise SDK - Java Libraries

    Hi All,
    I have installed the Crystal Report Server XI R2 but where to get the java sdk that I will use in my client j2ee web application?
    These are the folders in my CR Server directory.
    /BusinessObjects Enterprise 11.5
    /Business Objects/common/3.5/java/lib
    It seems that I will get the jar from this folder but what are those jars?
    /Business Objects/common/3.5/java/lib
    What are the list of jars that my client web application used?
    Basically in doing my POC work I need these library imports
    <%@ page import="com.crystaldecisions.sdk.exception.*"%>
    <%@ page import="com.crystaldecisions.sdk.framework.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.infostore.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.managedreports.*"%>
    Thanks in advance.
    Regards,
    Rulix
    Edited by: Rulix Batistil on Nov 4, 2008 11:38 AM

    Hi Rulix
    From the packages that you have included ,it seems that you are using managed RAS SDK for the functionality that you want to implement.
    Here is a listing of the JAR files that you would require in your RAS application. Please note that you would require the enterprise jars and the Crystal connection jars.
    - boconfig.jar
    - cecore.jar
    - celib.jar
    - ceplugins.jar
    - cereports.jar
    - certj.jar
    - cesession.jar
    - ceutils.jar
    - cexsd.jar
    - Concurrent.jar
    - corbaidl.jar
    - CRDBJavabeansServer.jar
    - CRDBJavaServer.jar
    - CRDBJavaServerCommon.jar
    - CRDBJDBCServer.jar
    - CRDBXMLExternal.jar
    - CRDBXMLServer.jar
    - crlov.jar
    - crlovexternal.jar
    - crlovmanifest.jar
    - ebus405.jar
    - freessl201.jar
    - icu4j.jar
    - jaxrpc.jar
    - jrcadapter.jar
    - jrcerom.jar
    - jsafe.jar
    - jtools.jar
    - log4j.jar
    - MetafileRenderer.jar
    - pullparser.jar
    - rasapp.jar
    - rascore.jar
    - rpoifs.jar
    - saaj.jar
    - Serialization.jar
    - sslj.jar
    - u211java.jar
    - URIUtil.jar
    - webreporting.jar
    - xbean.jar
    - xercesImpl.jar
    - xml-apis.jar
    Hope this helps you.
    Thanks
    Soni

  • I am trying to create a button in flash that will display 4 separate images at the same time when clicked.  I can't get the images to stay on when I take the mouse of the button.  I need the actions script code to make this happen.

    I am trying to create a button in flash that will allow the user to click on the button and 4 separate images show up at the same time.  I can get the images to appear when I click the button but they will not stay on the screen.  I need to know what code I use to make the images stay once the button is clicked, then I need to know exactly where I place that code.  It does not appear to be possible to add the action code to the buttons layer since each time I add a new layer I just get another "up" "over" "down" and "hit" line.
    Thank you in advance
    AP

    It is not clear how you are trying to realize this from your description.  If you are trying to create this within a button symbol it will not work.  Explain your approach and if there is code involved, show what you have so far.

Maybe you are looking for

  • Need to convert an image to .jpeg using Java !

    Hello, i am working in images now. i need to convert any image in the form of .jpeg using Java. in other words, i need to store an image in the form of .jpeg format. can any of u help me ! thanks in advance. - Krishna

  • How to find out duplicate record contained in a flat file

    Hi Experts, For my project I have written a program for flat file upload. Requirement 1 In the flat file there may be some duplicate record like: Field1   Field2 11        test1 11        test2 12        test3 13        test4 Field1 is primary key. C

  • ITunes will not restore my iTouch 4thG, either stops a short bit into the ipod restore process, or I get an error message(21)

    My iTouch 4thG first was not being recognized by my iTunes, so I couldn't sync my ipod. After trying to restore, like it told me too, the process froze not too long after beginning. The progress bar on iTunes gets maybe 1/8 of the way before it stops

  • Problems to read out an XML

    Hello together I have a problem to read out an XML file with JDOM. I am in charge to read out one attribute of the XML with JDOM. But my XML file has more than one Attribute of the same type. It is repeated more than once... It looks like that... <Re

  • My iphone joins home network, wife's will not

    My wife and I recently bought new iPhone 3gs. Mine connects automatically to our secured home network (after I put the name and password into my iPhone). Set my wife's up the same, but her's will not connect to our home network. Under Settings-->Wi-F