Where to Get The Windows 7 Home Premium .iso File for Pre installed OEM of Windows

Hi Everyone, Need help here, please..Here is the situation, i want to upgrade my current pre-installed OS (Win 7 x64) Home premium in my laptop HP ENVY 4-1013tx Notebook PC to Windows 10. I'ts fine in the beginning until it shut down because of heat problem. When i try to turn it on, BSOD appeared. I've try to run in safe mode with have no luck, the same BSOD still appeared.I decided to recover it but no OS was detected in recovery mode. I browsed for many forums and they said that my HDD got bad sector so I remove my hdd from the laptop and attached it on my PC and run chkdsk but didn't solve the problem (chkdsk error : an unexpected error occured).So the last thing I've done was to format the HDD and install a clean Windows 10 and can not activate it without the product key. I just want to go back to my Win 7 and want to upgrade it to Win 10 again. Can I get the iso file ? My Product is B4P83PA#AR6 Thank You

Here You Go: http://www.microsoft.com/en-us/software-recovery

Similar Messages

Norwegian Windows 7 Home Premium iso file

I have a legal license code for Windows 7 Home Premium (Norwegian) and I am looking for the install cd/iso for this. DOes anyone know if/where I can find this online for download?

Look at this site (the links are to digital river):
http://www.heidoc.net/joomla/technology-science/microsoft/14-windows-7-direct-download-links
After downloading the correct .iso file use ImgBurn or Gear ISO to create a bootable DVD.
Create a Bootable Windows 7 DVD using the .ISO file
Burning a Windows 7 ISO File on a DVD
http://support.microsoft.com/default.aspx/kb/977640
ImgBurn - In addition to supporting the creation of Cds/DVDs from .ISO files,
it supports a wide range of other image file formats, and it's free.
(BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
http://www.imgburn.com/
Screen shots to help you use ImgBurn:
http://www.imgburn.com/index.php?act=screenshots
Burning ISO Images with ImgBurn article:
http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
(The steps are the same for Windows 7 or Windows 8), except you are not creating a Repair disc but a full installation DVD)
Note: Always use high quality DVD+R media and the slowest burn speed (4x or 6x) if offered a choice.
====================== Keyless Install ================================
How to perform a 'Keyless Install' of Windows:
Boot from the Windows 7 DVD disc you created and start the installation process.
After you enter user name and password you will be asked to: 'Type your Windows product key', do not enter a key.
Also located just below the box where you would enter the key is a box with a check mark to 'Automatically activate Windows when I am online', remove the check mark and click 'Next'.
You will now have a 30 day grace period in which to activate Windows.
During this 30 day grace period you can try resolving your problems.
After you are satisfied all problems have been resovled then activate Windows.
====================== Device Drivers =================================
Go to your computer manufacture's support web site and check for Windows 7 drivers for your specific model number.
If there are Windows 7 drivers, then download to a folder on your hard drive and install all of them, starting with the Motherboard/chipset drivers, SATA, LAN, Audio, USB, Graphics, Webcam, Etc., and so on.
List of Computer Manufacturer's support sites:
http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers
Tips for fixing common driver problems
http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-driver-problems
Vista:
http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems
Graphics/Video drivers:
Check the Graphics card manufacture's download site for the most recent Windows 7 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us
================== How to Activate Windows 7 by Internet ==============
1) Click Start and in the Seach box type: Activate
2) Click on the 'Activate Windows' option at the top of the list
3) Click on 'Activate Windows online now'
4) Enter your 25 character product key (not case sensitive)
5) Click 'Next' and wait for the key to be verified.
Alternate Method - Reaching a real person:
1) Click Start, and in the Search box type: slui.exe 4
2) Next press the 'ENTER' key
3) Select your 'Country' from the list.
4) Choose the 'Phone Activation' option.
5) Stay on the phone *** do not select/press any options *** and wait for a person to help you.
6) Explain your problem clearly to the support person.
7) The support person should give you a confirmation ID, copy it down on paper,
8) Verify the ID is correct by reading back to the support person.
9) Enter the ID number and click 'Next' to finish the activation process.
Microsoft Activation Centers Worldwide Telephone Numbers:
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for Volume License Activation but if you call they will help you)
The phone number you called does not work:
Microsoft Wordwide contacts:
http://www.microsoft.com/worldwide/default.aspx
Activation and registration of a Microsoft product
http://support.microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
J W Stuart: http://www.pagestart.com
Never be afraid to ask. This forum has some of the best people in the world available to help.

Where we get the OutboundMessageService.WSDL OutboundMessageService.XSD files?

Hi Gurus,
Where we can download the follwing file for the webservice integration. Is it availble in OER?
OutboundMessageService.WSDL
OutboundMessageService.XSD
Thanks in Advance,
Mohan

Hi,
No, the WSDL and XSD for this are not in OER currently since it catalogs only the webservices Fusion Applications contains, but it seems useful addition so I'll see if we can get them added.
If you have an on-premises instance you can find it in Enterprise Manager, going to the crmCommon weblogic server, from the menu selecting Webservices, and finding the OutboundMessageServiceSoapHttpPort from the list under J2EE Intrastructure Webservices. Also you can use the Test Webservice feature in EM to shows and parse the WSDL at http://[myinstance]/crmCommonSalesParties/OutboundMessageService?wsdl
This is the same format for the SOAP message triggered by the Object Workflow and sent to the remote system endpoint.
Hope this helps
Richard
FA Developer Relations - blogs.oracle.com/fadevrel

I'm trying to update iTunes to 10.5.2 and I get the message that "a program required for this install to complete could not be run". I've tried all of the steps to try to resolve this (I have a PC) but nothing works. Help please!

I'm trying to update iTunes to 10.5.2. I have a Windows 7 64-bit Dell laptop, and when I try to update it, I get the message "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I went to the troubleshooting page and did all of the steps they listed: uninstalled iTunes, deleted by Temp files, even disabled AVG while I downloaded again and tried to install. I still get the same message. If anyone can help me, I would really appreciate it!

You must have gone to the old microsoft post.
Here is the link:
http://support.microsoft.com/kb/2438651

Where can I get the Adobe Reader 11 .msi file for distribution?

I have a distribution agreement, but the only version available on the web site is the .exe file. Where can I get a copy of the .msi file so I can use the Customization Wizard?

Hi JackTatSykes
Download the reader X MSI from the below link : ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.0.0/en_US/
Reader XI : ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/

Can't install extension - I get the following error message "this extension cannot be installed it requires windows 64bit indesign version 9 or greater"

I have Indesign CC 2014 64 and it is showing in the product list

I forgot to mention I use Microsoft Outlook 2003 (11.5608.5606) for my email.

Where to store the PO: Terms and Condition file For printing it in PO

Hi All,
I want to add Terms and condition in my PO: Print output which is coming in PDF. I got the Profile name, which is --PO: Terms and Conditions filename. But i am not getting where i have to store the file on server and what i need to give the value for this profile. I had customized the PO_STANDARD_XSLFO template. Now only remaining thing is that i want to add the Terms and Conditions.
Should I hardcode it in the XSL-FO Template???
OR what value i should give to this profile option?
Regards
Ravi

Ravi
Check the thread
How to add Terms and Conditions in Standard PO XSL-FO template
Vicha

How to get the real time controller download file for cRIO 9074

Hello
I am a beginner of LabView. Now I do a project in school with cRIO 9074.
My problem is that I have deleted the embedded controller system by fault. But in the Measurement and Automation software I didn't find the controller sysyem which have the fonction of monitor on line. How can I download the load file?
Wait for your help, and thank you for your help very much.
Solved!
Go to Solution.

Even if you format the cRIO system it should be found by the MAX and by opening the Software config you can reinstall the system files assuming that they are installed on the connecting system (PC).
So you have to use the MAX to setup the cRIO. Maybe it is of help to set the DIP switches to NoApp and IPReset first.
Hope it helps
Christian

Using PS CS1 & a Canon EOS Rebel T3i. Where to get the plug-in to use camera raw?

Using PS CS1 & a Canon EOS Rebel T3i. Where to get the plug-in to use camera raw?

Thank you.
Windows 7 Starter
on a Toshiba NB505
Intel Atom CPU [email protected]
This is my internet notebook access device.
My primary system is MS Windows 5.1, with a flat screen crt.
Does this help?
Want to use RAW, can't afford to upgrade equipment just yet.
Thanks again for any guidance offerer
Michael
Connected by DROID on Verizon Wireless

Help for downloading/installing PSE13 with window 8.1?

I get this message after intall attempts ..."Installer has detected that a machine restart may be pending. Its recommended that you quit the installer, restart your machine and try installing again," Lightroom, however, installed fine.

Thank you for responding. I got some advice from a Microsoft forum....it worked. Thanks again.
From: Pat Willener <[email protected]>
To: kathryn kramar <[email protected]>
Sent: Saturday, January 3, 2015 10:56 PM
Subject: help for downloading/installing PSE13 with window 8.1?
help for downloading/installing PSE13 with window 8.1?
created by Pat Willener in Downloading, Installing, Setting Up - View the full discussion
pwillener wrote: What is your operating system?
Sorry, you specified Windows 8.1 in the subject line. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7063274#7063274 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7063274#7063274 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 cont...

I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 ULTIMATE then after the exctraction of files and everything the windows setup came and my mouse and keyboard stopped working and i dont know how to open mac os x there is no option anywhere?? what shall i do pls help!!!!if there are any keyboard shortcut key to open mac os x or boot camp pls mention.

For Boot Camp issues please repost in the Boot Camp forum located by clicking Boot Camp

Can I change the OS of Touchsmart 610 from Windows Home Premium to Windows 7 Pro?

I have 610 1100me system loaded with Windows Home Premium 64 bit. We bought it from Dubai and is in use in Pakistan. It started giving problems after few weeks of use. Its' hard disk makes noise and sometimes, system could not find boot disk. Most of the times blue screen of death and hanging issues. Any idea about this issue and how to fix it? My observation is that the culprit is hard disk!
Also, can I change its OS to Windows 7 Pro or ultimate (32 or 64 bit)? Where can I find all drivers for Pro or Ultimate?
Many thanks for your valueable advice.
Regards,
KK
This question was solved.
View Solution.

Hi,
Nearly nothing change interms of drivers required for Windows 7 (HP, Pro, Ultimate) unless you switch from 64 to 32 bit. You can reuse your current HP 64 bit drivers for 64 bit W7 Pro or Ultimate.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT1476 if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in A

if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.

Just connect it to a computer's USB port.
Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is.

I cannot load the latest version of Itunes on my Toshiba PC with Windows 7 Home Premium. Tried to re-install. Dead in the water. Windows error 126. Cant start becasue MSVCR80.dll is missing from my computer

I cannot load the latest version of Itunes on my Toshiba PC with Windows 7 Home Premium. Tried to re-install. Dead in the water. Windows error 126. Cant start becasue MSVCR80.dll is missing from my computer

You may have to follow the slightly more detailed steps in whichever of these two applies to you.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Rebooting into safe mode may be needed to delete any folder the instructions say you should remove. You may also find this Microsoft Fixit helps to remove stubborn components. It has taken some people several attempts to completely clean iTunes and supporting software before they have been able to successfully reinstall it.
tt2
Message was edited by: turingtest2

If I were to buy the 7 Home Premium SP1 64bit, System Builder OEM DVD 1 Pack from Amazon to install Microsoft Windows 7 on my Mac, would it be compatible with my computer when I put it in bootcamp? (I have all of the current software updates)

If I were to buy the 7 Home Premium SP1 64bit, System Builder OEM DVD 1 Pack from Amazon to install Microsoft Windows 7 on my Macbook Pro, would it be compatible with my computer if I put it in bootcamp? (I have all of the current software updates)

In order to run Windows Applications, you must own the applications and, since they require Windows, you must own Windows. There are technologies like wine that will allow Windows applications to run without Windows, but they tend to be flakey at best.

Where to Get The Windows 7 Home Premium .iso File for Pre installed OEM of Windows

Similar Messages

Maybe you are looking for