Where to get v.4 pls

How do I downgrade to Safari 4? And where to get it?? version 5 is really really bad. It slows down my entire system. (I dont have any 3rd party plugins or whatever)

Don't give up on it yet!
If your Safari keeps crashing, or if you are updating Safari (or just have) and it is misbehaving:
N.B. Never delete Safari, never run it under Rosetta, don't use proxy settings, and don't change the application's name or move it from the top level of the Applications Folder to a sub-folder.
(If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall. Alternatively you can download Safari directly:
Safari 4.1.2 for Tiger can be downloaded here:
http://support.apple.com/kb/DL1069
Safari 5.0.2 for Leopard (and Snow Leopard) can be downloaded from here:
http://support.apple.com/kb/DL1070
Make sure you download the correct version for your system.
Also, observe the recommended procedure for installing software: repair permissions and close all applications, install, then repair permissions again.)
Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta and which was updated to v.3.1.2, and now Tiger uses Safari 4.1.2 and Leopard uses Safari 5.0.2, as does Snow Leopard albeit a different version. If these latest versions of Safari are not the fastest browser you have ever used, then something is wrong!
(Trying to revert to a previous version of Safari can have repercussions, as previous versions of Safari used a completely different webkit on which other applications like iChat, Mail, Dashboard Widgets etc also rely, but if you really want to do this post back for instructions on the safe way to do so.)
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-ons that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet, and the dreaded CT Toolbar. If you have them, trash them and go the developer's sites to see if new versions are available for the latest version of Safari on your current operating system.
You must also ensure that you have downloaded and installed all the correct version for your Mac of Security Updates. These require a restart and a permission repair.
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• Hard Disk/Library/InputManagers
• Home/Library/InputManagers
especially prior to system updates and updates to Safari (they can always be added back one-by-one later).
Lastly, the Safari updates require a restart of your Mac, and sometimes even a double restart is required.

Similar Messages

  • Where is toolbar is hiding, pls. let me know?

    Hello,
    I have developed the form by using LiveCycle Designer 8.1. Our Adobe reader ver. is 10.1.3
    I am launching the develped adobe form on IE browser, the form is part of our SAP app. When the form is rendering on the browser i don't see the adobe's toolbar at all (wherein we have SAVE, PRINT, ZOOM/SIZE button options)!! where its hiding!! pls. see the below JPEG pic., pls. help me how to fix it (i put the below JS in INITIALIZATION event of at my_form_1 level
    order to switch OFF the DEFAULT's HIGHLITING EXISTING FIELDS option,
    app.runtimeHighlight = false;
    This issue of hiding is occuring sometimes (seems ...if already another adobe reader file is opned on my desk top), other times its OK, i mean if its only am opening!!
    Last week itself i upgraded from ver. 9 to 10. In my old / ver 9 its fine, i don't see this issue
    Do i need to put any settings / JS to get the tool bar is available in all scenarios, if so, pls. suggest me the JS or any settings?
    THANK YOU

    Any help pls?
    Than k you    

  • What to learn/where to get documentation to be certified

    I'd like to do certification for sql and plsql. Can someone give me some recommendation what to learn and where to get things to learn (Metalink, OTN, OPN, etc...).
    Thanks for advices!
    m.

    marussig wrote:
    I'd like to do certification for sql and plsql. Can someone give me some recommendation what to learn and where to get things to learn (Metalink, OTN, OPN, etc...).
    Thanks for advices!
    m.1) Read the [http://blogs.oracle.com/certification/2009/05/the_route_you_choose.html] for some general learing tips.
    2) Be aware of the the site : [http://www.oracle.com/education/certification]
    3) Be aware of this link. You can drill down to the exam topics for it for it: [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=155]
    The best training is usually to take an Oracle Course.
    Recommend do the SQL exam first. If you wish to self study for 1z0-051 there is an adequate Oracle Press book for you to do this from, but be sure to get in plenty of practise as well (ISBN-13: 978-0071597869).
    4) For PL/SQL the situation is less straightforward. Browse recent posts of 1z0-144/1z1-144/1z0-146/1z0-147. Again an Oracle Training course may be he best method.
    eg:
    - Re: !Z0-146
    - Re: Expert Advice .... a lot is off topic but I gave one good post.
    - Re: 1z1-144 and 1z0-146

  • What to learn/where to get documentation to be certified [answered]

    I'd like to do certification for sql and plsql. Can someone give me some recommendation what to learn and where to get things to learn (Metalink, OTN, OPN, etc...).
    Thanks for advices!
    m.
    Edited by: marussig on Sep 5, 2009 12:34 AM
    Edited by: marussig on Sep 6, 2009 10:31 PM

    Hi,
    You can post your query in this Oracle Certification Program for appropiate responses. Also check [Oracle Certification Program|http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=39]
    Regards,

  • Where to get the SSO ticket for a JCO-Connection from?

    Hey All,
    The szenario is, I've got a Java application and I want to connect to a SAP System. For this I want to use SSO. In the documentation of JCO I found this phrase:
    For SSO specify the user to be $MYSAPSSO2$ and pass the base64 encoded ticket as as the passwd parameter.
    Well... Now my question... Where to get this base64 ticket from? The problem is, I'm NOT using WebDynpro, it's a custom application running on client side. Now how to get the needed information? (PSE?)
    It would be great when you could give me a clue.
    Best regards,
    Kristian

    This linksactualy leads to the same place I mentioned where
    it installs the
    player over the Internet
    Another thing is that these players are said to be different
    for different
    browsers which means they are working together with a
    browser. I am looking
    for a player which allows to play SWF file directly, without
    a browser.
    I have such a player installed together with FLASH-8 - I am
    looking for
    such a player
    "DMennenoh" <[email protected]> wrote in
    message
    news:e2qgmu$t5r$[email protected]..
    > Does this help:
    >
    http://www.macromedia.com/shockwave/download/alternates/
    >
    > --
    > Dave -
    > Adobe Community Expert
    > www.blurredistinction.com
    > www.macromedia.com/support/forums/team_macromedia/
    >
    >

  • I have an iphone 2g unlocked for tmobile.  For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day.  It can't find tmobile on my phone?

    I have an iphone 2g unlocked for tmobile.  For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day.  It can't find tmobile on my phone for some reason but for 2 years previous it could no problem?  tmobile says it is a problem with my phone and not their service.
    Any ideas what to do?

    I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
    If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414).  You will be given the option to restore to that backup at the end of the restore process.  Your messages are stored in the backup so restoring to the backup will return the messages to your phone.  Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

  • Where can get version 10 of Elements 10? I have bought a new PC and need to load it.

    Where can get version 10 of Elements 10? I have bought a new PC and need to load it.

    Refer to this:
    Direct Download Links for Adobe Software
    Mylenium

  • How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room

    How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?

    Welcome to the Apple Community.
    Unfortunately the Apple TV doesn't have a web browser so you can't do that.

  • Where to get the source code of the owa_cookie.send procedure?

    I want to know where you get the source code of the owa_cookie.send procedure? I can only get the header of this package from ...\RDBMS\ADMIN\pubcook.sql. Could you paste the whole source code here and then I can modify it to set the 'httponly' attribute? I also have a problem that after changing the package, how to use the package I changed? Does it still a system package here? Or it has been changed to an user-defined package in database and I need to execute the package on the database for the web server?
    Thank you!

    Hi Arun,
    I am unable to see the pcui_gp components in the DTR ,I require this in order to get the source code of one of its component.
    Can you please tell me the step by step procedure getting those pcui_gp components from J2ee engine to the  dtr or  NWDI.
    If there are any documents on pcui_gp components exclusively please do forward to my mail id [email protected]
    Thansk and Regards,
    Anand.

  • Where to get the image file of directory and file icon??

    I've wrote a "file chooser" by my self and
    I need different icons to denote directories and
    files. Does anyone know where to get this icons??
    thanks

    use print screen and paste it in paint shop
    cut what you need

  • HT1338 why i'm not able to open pdf files? says i need adobe reader, but not sure where to get it.

    why i'm not able to open pdf files? says i need adobe reader, but not sure where to get it.

    Welcome to the Apple Support Communities
    You can use Preview to open PDFs. Right-click a PDF file and go to Open with > Preview

  • Where to get AS2 MDN xsd or dtd?

    Hi guys!
    I need to configure MDN receiving and as I go through Seeburger documentation, in the last chapter there is a scenario description, however, I don't know where to get xsd or dtd for creating interface for MDN messages. Any ideas?
    Thanx a lot! Peter

    Hi,
    The purpose of the MDN is to acknowledge the receipt of a payload message. An MDN contains machine-readable information on the delivery state of the payload message. E.g., it contains the message digest (MIC) of the payload message as calculated by the recipient. An MDN is optionally signed then the recipient can authenticate the sender of the MDN and check its integrity. A validly signed MDN combined with a valid MIC, reported by the MDN, can be used by the payload message sender to claim “non-repudiation of receipt” (NRR) of the payload Message.
    If the MDNs are processed in the XI system, this flag must be set to “Refer to XI System”. The adapter will then create an acknowledgment report message containing some information on the acknowledged document.Important: In case “Refer to XI System” is selected, a <b>sender channel with message protocol ‘Reports’ and a sender agreement for the generated acknowledgment report messages</b> (refer to the paragraph “Sender Message Channel (Inbound Processing)”) have to be configured. In case of asynchronous MDN mode, an Report channel and Sender agreement always have to be configured also when “Refer to XI system” is disabled!
    Also see section of Document
    <b> Case B: Receiving the Acknowledgment Report (Optional) For this purpose, set the “Handle received MDN” flag of the AS2 channel to “Refer MDN to</b>
    Regards,
    Akshay Jamgaonkar.
    Reward points if find useful.
    Also mark question answered if solved.

  • Where to get the BusinessObjects Enterprise SDK - Java Libraries

    Hi All,
    I have installed the Crystal Report Server XI R2 but where to get the java sdk that I will use in my client j2ee web application?
    These are the folders in my CR Server directory.
    /BusinessObjects Enterprise 11.5
    /Business Objects/common/3.5/java/lib
    It seems that I will get the jar from this folder but what are those jars?
    /Business Objects/common/3.5/java/lib
    What are the list of jars that my client web application used?
    Basically in doing my POC work I need these library imports
    <%@ page import="com.crystaldecisions.sdk.exception.*"%>
    <%@ page import="com.crystaldecisions.sdk.framework.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.infostore.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.managedreports.*"%>
    Thanks in advance.
    Regards,
    Rulix
    Edited by: Rulix Batistil on Nov 4, 2008 11:38 AM

    Hi Rulix
    From the packages that you have included ,it seems that you are using managed RAS SDK for the functionality that you want to implement.
    Here is a listing of the JAR files that you would require in your RAS application. Please note that you would require the enterprise jars and the Crystal connection jars.
    - boconfig.jar
    - cecore.jar
    - celib.jar
    - ceplugins.jar
    - cereports.jar
    - certj.jar
    - cesession.jar
    - ceutils.jar
    - cexsd.jar
    - Concurrent.jar
    - corbaidl.jar
    - CRDBJavabeansServer.jar
    - CRDBJavaServer.jar
    - CRDBJavaServerCommon.jar
    - CRDBJDBCServer.jar
    - CRDBXMLExternal.jar
    - CRDBXMLServer.jar
    - crlov.jar
    - crlovexternal.jar
    - crlovmanifest.jar
    - ebus405.jar
    - freessl201.jar
    - icu4j.jar
    - jaxrpc.jar
    - jrcadapter.jar
    - jrcerom.jar
    - jsafe.jar
    - jtools.jar
    - log4j.jar
    - MetafileRenderer.jar
    - pullparser.jar
    - rasapp.jar
    - rascore.jar
    - rpoifs.jar
    - saaj.jar
    - Serialization.jar
    - sslj.jar
    - u211java.jar
    - URIUtil.jar
    - webreporting.jar
    - xbean.jar
    - xercesImpl.jar
    - xml-apis.jar
    Hope this helps you.
    Thanks
    Soni

  • Where to get 1.4.2._04 JVM?

    Sun had a maintainence release 1.4.2._04 on March 10, 2004. However, the official download site for 1.4 J2SE (http://java.sun.com/j2se/1.4.2/download.html) still points to the previous version 1.4.2_03.
    What's more confusing is that, when I did a google search on 1.4.2_04 SDK download, google has a "cached" page which DOES point to 1.4.2_04 (the google cache timestamp is March 22). It seems that Sun has published 1.4.2_04 download at one time, but later reverted back to 1.4.2_03.
    Does anybody know where to get official 1.4.2_04 J2SE SDK, or when it will be available for public download? Is it stable?
    Also, I downloaded 1.4.2_04 SDK following Google's cached page:
    http://66.102.7.104/search?q=cache:anGj0_-PWb4J:java.sun.com/j2se/1.4.2/download.html+j2sdk+1.4.2_04+download&hl=en&ie=UTF-8. Is this the official version?
    Anyone with 1.4.2_04 VM experiences please share your opinions.
    Thanks.
    Yan

    Yeah, it was there last week, but it seems to have vanished :-(
    There is a discussion about it's disappearance here:
    http://forum.java.sun.com/thread.jsp?forum=17&thread=506253&tstart=0&trange=15
    And it has been spotted by javalobby too:
    http://javalobby.org/
    http://javalobby.org/thread.jspa?forumID=61&threadID=11985
    I hope Sun clear this up... And I also hope that this is a website problem, not a problem with _04 :-(

  • 8i: where to get on-line docs?

    Does anyone know where to get the on-line docs that usually come
    as part of an Oracle Server install? They don't appear to come
    with Linux download or CD.
    I found the extensive PDF docs in the Technet documentation
    section. They are nice BUT Netscape/Acrobat appears to have some
    problems browsing large PDF files AND I have gotten very use to
    using the HTML based docs that came with my Oracle 7.3.4. I'm
    hoping the equivalent docs are available (or will be available)
    for 8i on Linux.
    Alternatively, if Oracle could produce the PDF's with the
    deliver "page-at-a-time" features enabled the PDF's would be
    easier to use.
    R.Parr
    Temporal Arts
    null

    Thanks For the questions Kmac, and willingness to help.......!
    Answering the Qoestions in order:
    you've had these two working together before? NO
    have you tried resetting the modem? YES
    manage the PPoE settings in network setup? NO (not a clue what that means)
    can you get to the modem set up page? YES (no listing for the ActionTec DSL modem (from Quest))

Maybe you are looking for

  • How do I submit a computer for repairs/use my warranty?

    Okay, I have a HP Pavillion 500-a60 Desktop PC and this thing has given me trouble since I've first gotten it! The frist problem was that it's hardware system crashed within the frist 3 weeks of having it THEN when I got a new one it wouldn't conntec

  • Purchase orders manily against the sales orders

    My client do purchase orders manily against the sales orders... but to meet the minimumn purchase order quantity or value they club many sales orders in a single purchase order... now is there any way to track for what sales-order-item what purchase-

  • Different Units in the Report

    Hi All, We have a cube in which we store delivery quantities in sales units. We have another ODS in which we store the delivery quantities in different units, say Litres, KGs, Pounds etc. Ex: Cube: DelNo quantity Unit 1001        100      L 1002     

  • Type Decimal in ABAP

    Hi All, Data : var1 type zdec.      (here zdec is of type decimal with length 5) var1 = 1,234. Now i want only two places after decimal. Which means (1,23). How can i do this ? Please suggest if there is any function Module

  • Want to use popup child window

    Hi everybody..... In my page i have a button. on clicking this button another window is opened which contain only a single textarea and a button. I want to get the text (written in the text area) when user click on that button of the new window i com