Where to get WAS ABAP+J2EE 6.0

Hi
In the installation guide for XI its written that the pre requisite for XI 3.0 installation is one should have WAS ABAP_J2EE 6.40 installation. Where should I get this software to download. It is possible to use WAS 6.40 J2EE (MAXDB one) only for XI installation.
Thanks & regards
Ashutosh

Thanks all for the response.
Do I need licensed copy of WAS for evaluation purpose also? I have downloaded these two files rom service market place
(1) 51030723_4(SAP NW04 SR1 SAP Exchange Infrastructure 3.0).zip (65 MB)
(2) 51030723_5 (XI).ZIP (391 MB)
The setup file is there in first one but it gives error while I tries to run it.
<error>
ERROR 2005-05-25 19:59:08
FKD-00037 Query did not return a result.
ERROR 2005-05-25 19:59:08
FKD-00038 Query did not return a result.Select attribute SID, statement: WHERE ROWNUM = 0
</error>
Is it means that I need to install WAS 6.4 first as per installation guide.
Secondly will work if I install WAS 6.4 J2EE only for evaluation purpose.
regards
Ashutosh

Similar Messages

WAS ABAP+J2EE - Portal - client copy

I have installed a WAS ABAP and now doing the J2EE add-In.
Do i have to make a different client. The sapinst asks for a rfc connection to a client , the default is 000. Which can be ok for using the abap programs but afterwards I need to install the portal. Does this portal needs a client ?

Hello Johan,
The portal runs on the J2EE engine and does not need a client.
Regards
Abdul

Where to get WAS 6.4 for NW studio on windows 2K professional or XP

HI
We are using the following EP versions.
Fri May 21 21:00:24 CEST 2004
Creation-Date=20040521
Creation-Time=1912
Manifest-Version=1.0
Implementation-Title=Portal version.info
JDK-Version=1.3.1
Creation-User=makefact
Implementation-Vendor=SAP AG
Sync-Changelist=204112
Implementation-Vendor-Id=com.sap
version=6.0.2.4.1
Specification-Vendor=SAP AG
Implementation-Version=6.2.0.4.200405212100
Make-Release=60_SP2_REL
Sync-Timestamp=200405211839
Version History
6.0.2.4.8_ContentManagement_Collaboration
6.0.2.4.1.Enterprise_Portal_Service_Pack_2
while installing EP , it installs the WAS .
I would like to install WAS 6.4 with NW studio on my desktop for development activity. Where can I get WAS6.4 seperately.
and also I would like to know whether having WAS 6.4 seperately on my desktop calls for any licensing issue.
If not , where can I get WAS 6.4 and installation guide for the same.
thanks
PK

PK,
Theres an eval version here of NWDS, WAS 6.40, EP6:
https://www.sdn.sap.com/sdn/downloadarea.sdn
Select 'Web AS' from the 'Available Downloads' menu and select:
'SAP NetWeaver Enterprise Portal on MaxDB, Developer Edition Sneak Preview - Web Application Server Java 6.40 with MaxDB, Developer Studio'
You might also need winrar to extract (if extension is .rar). You can download a command line version for free from here:
http://www.rarlab.com/download.htm
Cheers,
Steve

Installation WAS ABAP UC + WAS J2EE Add In..and XI

Hello everybody,
Could anyone help me with this issue ??
I am going to install WAS ABAP and WAS J2EE Add in and after that do the XI installation.
I am reading the installation guides and I have some doubts about "Hardware and SOft Requirements Section".
I am going to do a Central System Installation (WAS ABAP + WAS JAVA Add in)
I have read the two installation guides: WAS ABAP and WAS J2EE.
Somewhere I read that I have to add requeriments. For example, if I am going to install CI and DB on the same server, then I have to add RAM for CI and RAM for DB.
The question is:
In the installation guide for WAS ABAP, Database Requeriment Disk is 14 GB (Unicode)
And in the installation guide for WAS JAVA, Database Req. Disk is 14 Gb (Unicode)
Have I to add 14 + 14 ?? Or 14 Gb is OK for the database with the two schemas ??
Same is for Paging File ?? I am 64 bit server.
It is a Development System
Many, many thanks !!

We have a ABAP/J2EE 6.20 system running with only 8GB ram total on the system and we do get some swapping but for a development I would say we see great performance.
XI I can'T say though...

Where to get ABAP Development Workbench ?

Hello sap gurus, I alredy have SAP NetWeaver Enterprise Portal on MaxDB - Developer Edition Sneak Preview installed on my server. However I want to use the ABAP Development Workbench. I do now want to buy a book with cds or go to the sap shop site to get minisap.
Is there any way to Use ABAP Development Workbench with Web Application Server 6.4 or 6.1?
If yes where to get the WAS 6.1?
Thanks

Read the responses in your other posts of the same question.

Connect J2ee UME to WAS ABAP and WAS ABAP to LDAP and Role sharing

Hi,
We have a requirement of using the same roles in ABAP and Portal, and also that Both can authenticate to LDAP server.
the first Question is, can we use the roles in R/3 connecting the Portal UME to the WAS ABAP for authentication?
the second Question is, if we connect J2EE UME to the WAS ABAP and the WAS ABAP to the LDAP then the Portal will be geting the user authentication from LDAP as well?
Thanx in Advanced!!
Gerardo J
Message was edited by: Gerardo Jiménez

Gerardo,
Kindly check blog
Portal UME data store and various options (Opinions needed!)
There are also presentations on that topic on sdn.
James

Where to get license key for SAP Netweaver ABAP 7.01 trail version?

Hi All,
I installed SAP Netweaver ABAP 7.01 trail version on my PC but I don't know where to get the license key and how to install it. Please guide me.

Hi
Refer the following link for installation of license key.
https://cw.sdn.sap.com/cw/docs/DOC-111105
/people/mario.herger/blog/2010/01/20/new-community-developer-license-is-available
Regards
Vinodh

Any one tell me the web site where i can get only ABAP HR FAQ

I am searching in net and i am getting only ABAP faq's and i am not getting specific ABAP HR faq's.Could any one tell me where i can get only ABAP HR faq's
Thanks
Prasanth

Hello Prasanth,
Try this link for ABAP HR FAQ :
[SAP ERP Human Capital Management (SAP ERP HCM);
Good Luck,
Boaz

I upgraded both my iphone and mac os and I noticed that when listening to internet radio I only get 1 channel whereas before I was able to receive 2 channels. Any suggestions?

upgraded both my iphone and mac os and I noticed that when listening to internet radio I only get 1 channel whereas before I was able to receive 2 channels. Any suggestions?

I received my week 16 MBP yesterday morning. It has been perfect thus far. Quite the improvment over my old iBook. I do hear some noises rarely but not enough to make me think there is a problem, I believe they are just the standard purrs and ticks of a high-powered computer. It doesn't run hot. I'd say cool to rather warm if used heavily. I hope I have a problem free experiance. I would hate for this product to tarnish Apple's reputation, that would be unacceptable considering this product is amazing. I will say this; I called Applecare, more out of curiousity than anything else and told them that I had just purchased an MBP and, while mine was fine, I had heard allot of disturbing reports about noise and heat. I asked point blank if Apple was aware of any issues and if they where working to resolve it. The answer I got was surprisingly forward. I was informed that they were "VERY" aware and working to correct the issues. He then told me I was lucky to recieve one of the quiet MBPs. I hope they work it out soon.
MacBook Pro Mac OS X (10.4.6)

Hello, i lost my iphone and now bought an ipad. Also my computer (where my itunes was) is dead. Is there anyway i can get my music back with my apple id?

Hello, i lost my iphone and now bought an ipad. Also my computer (where my itunes was) is dead. Is there anyway i can get my music back with my apple id?

Okay ... you might be able to get back some of your past purchases if your country's iTunes Store supports redownloading past purchases. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
... but if you didn't maintain a back-up, then other content (songs that you'd ripped yourself from CDs and so forth) is gone, and you'd have to reimport it.

Error in WAS ABAP+JAVA installation

Hi all,
I have a notebook with WAS 6.40 ABAP stack running fine. Now I'm trying to install WAS Java stack (NW04 Sneak Preview SP11) in the same machine, but I always get this error in the 6th step of the installation process:
6th step: MaxDB Database Installation:
ERROR 2005-10-25 15:41:59
CJS-00030 Assertion failed: in function sapdb_param_init(db_name, db_host, sapdb_version, inst_type) { var init_s; if (inst_type == undefined) { init_s = "OLTP"; } else { switch (inst_type) { case "LVC": init_s = "LVC"; break; default: init_s = "OLTP"; break; } } var r_arr = sdb_instance_type(db_name, db_host, init_s, sapdb_version); ASSERT(arguments.callee, r_arr != undefined, "SDB: ERROR EXECUTING PARAM_INIT!"); ASSERT(arguments.callee, r_arr[0] == "true", "SDB: ERROR EXECUTING PARAM_INIT! CHECK THE XCMDOUT.LOG FILE!"); return (r_arr[0] == "true");}SDB: ERROR EXECUTING PARAM_INIT! CHECK THE XCMDOUT.LOG FILE!
I've tried several times. I've tried to start and stop the WAS ABAP and all SAP windows services and I always get an error. Before any installation I uninstall previous incomplete installation and I remove all registry entries.
During the SAPinst previous parameters pages, sapinst ask for "reinstall or reuse the SAP MaxDB Web Manager" (or similar). I've tried both options without success. Which is the correct option?
I need to install EP NW04 in the same machine that WASP WAS ABAP to configure the SLD and run a webdynpro application at the portal.
Can anybody help me?
Best regards.

Agustin I think you probably have the same problem as I had which can be resolved by dropping the J2E database read my install log:
A major problem was that I kept on getting installation error where the message gave no indication on what is actually wrong. This was probably caused by the uninstall failure of another Netweaver installation.
To completely remove the installation manually I had to find and stop all the related services in order to delete the files, then I had to clean up the registry.
A another major problem was that the system still believed that there was a J2E database on the system although all its files were deleted. In order to remove (drop) the database I first had to install MaxDB in order to remove the database with the following statement dbmcli -d J2E -u control,control db_drop. Use statement dbmcli db_enum to view the databases on your system (go to the folder, probably c:\sapdb, were the SAPDB is installed before executing the command in a dos box).
Let me know if this helped.
Kind Regards,
Dennis.
Message was edited by: Dennis

OBIEE 11g after expand Hierarchy Columns move the page to where the expand was clicked

Hi,
I have a question about expanding the hierarchy columns.
I have made so that some information are only show when press the + sign to expand extra information.
The problem I am having is that when the + sign is pressed to expand the content, the whole page get refresh and move back to the top of the page.
Is there a way to stay where the screen was after expanding, instead of going back to the top of page?
Thanks in advance.

Hi Niraj,
I think you are on 11.1.1.5 + version here. Now, that you have two security realms configured (one for AD and one default), please add one more parameter virtualize = true in the EM (just the page where you added user.name etc).
This parameter would help BI Server recognize the two realms set up here.
Hope this helps.
Thank you,
Dhar

ORA-01858: a non-numeric character was found where a numeric was expected

hi ,
This was the code which shows the sales rep invoice amount and collected amount but while running report thru concurrent program its showing the following error:
ORA-01858: a non-numeric character was found where a numeric was expected
WHERE TO_CHAR ( TO_DATE ( PS.GL_DATE , 'DD/MON/YY' ) , 'MON-YYYY' ) BETWEEN TO_CHAR ( TO_DATE ( : ==> P_todate , 'YYYY/MM/DD' ) , 'MON-YYYY' ) AND TO_CHAR ( TO_DATE ( : P_todate , 'YYYY/MM/DD' ) , 'MON-YYYY' ) AND ps.customer_id = cust.custome
The Actual Code was this
SELECT SUBSTR(SALES.name,1,50) salesrep_name_inv,
--ps.CLASS,
SUM(ABS(ps.acctd_amount_due_remaining)) acctd_amt,
SUM(ABS(ps.amount_due_remaining)) amt_due_remaining_inv,
SUM(ABS(ps.amount_adjusted)) amount_adjusted_inv,
SUM(ABS(ps.amount_applied)) amount_applied_inv,
SUM(ABS(ps.amount_credited)) amount_credited_inv,
SALES.salesrep_id,
NULL "REMARKS"
-- ps.gl_date gl_date_inv,
FROM ra_cust_trx_types ctt,
ra_customers cust,
ar_payment_schedules ps,
ra_salesreps SALES,
ra_site_uses site,
ra_addresses addr,
ra_cust_trx_line_gl_dist gld,
gl_code_combinations c,
ra_customer_trx ct
WHERE TO_CHAR(TO_DATE(PS.GL_DATE,'DD/MON/YY'),'MON-YYYY')
BETWEEN TO_CHAR(TO_DATE(:P_todate,'YYYY/MM/DD'),'MON-YYYY') AND TO_CHAR(TO_DATE(:P_todate,'YYYY/MM/DD'),'MON-YYYY')
AND ps.customer_id = cust.customer_id
AND ps.customer_trx_id = ct.customer_trx_id
AND ps.cust_trx_type_id = ctt.cust_trx_type_id
AND NVL(ct.primary_salesrep_id, -3) = SALES.salesrep_id
AND ps.customer_site_use_id+0 = site.site_use_id(+)
AND site.address_id = addr.address_id(+)
AND TO_CHAR(TO_DATE(PS.GL_DATE_CLOSED,'DD/MON/YY'),'MON-YYYY')
BETWEEN TO_CHAR(TO_DATE(:P_todate,'YYYY/MM/DD'),'MON-YYYY') AND TO_CHAR(TO_DATE(:P_todate,'YYYY/MM/DD'),'MON-YYYY')
--AND ps.gl_date_closed > TO_DATE(:P_todate,'MON-YYYY')
AND ct.customer_trx_id = gld.customer_trx_id
AND gld.account_class = 'REC'
AND gld.latest_rec_flag = 'Y'
AND gld.code_combination_id = c.code_combination_id
AND sales.salesrep_id is not null and sales.name is not null
-- and ps.payment_schedule_id+0 < 9999
-- AND SALES.salesrep_id ='1001'
GROUP BY SALES.name,
--ps.CLASS,
SALES.salesrep_id

So to_date function accepts a string as input and returns a date. When a date is input instead, it is implicity converted to the required type of the function paremeter, which is a string, so that to_date can convert it back to a date again.
If you are lucky with the implicit conversion, you get the same date back, if you are not you might get a different date or an error.
From your query it appears that this conversion from a date, to a string, to a date, and then back to a string using to_char this time, is being done to remove the time or day part of the date. The actual range comparison is being done on strings rather than dates, which is dangerous as strings sort differently than dates.
In this example if I sort by date, Jan 01 comes between Dec 00 and Feb 01 as you would expect.
SQL> select * from t order by d;
D
12-01-2000
01-01-2001
02-01-2001When converted to strings, Feb 01 comes between Dec 00 and Jan 01, which is probably not the desired result
SQL> select * from t order by to_char(d,'DD-MON-YY');
D
12-01-2000
02-01-2001
01-01-2001If you want to remove time and day parts of dates you should use the trunc function
trunc(d) removes the time, trunc(d,'mm') will remove the days to start of month.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14200/functions201.htm#i79761

TS3694 when doing a restore to try and solve a wifi problem with my iphone 5 i got past the point where the software was extracted from my phone but then an error message came up saying that the phone could not be restored because of an unknown error (301

when attempting a restore, as suggested, to try and fix a week wifi signal on my iphone 5 I got past the point where the sopftware was extracted from my phone but then an error message appeared saying that the phone could not be restored becase of an unknown error (3014). I have tried about 20 times to make it work after trying a number of suggestions I have seen online. My phone gives me know response accept showing a picture of the cable and the itunes symble an the screen permanently - please help

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

Installation of Web AS 6.40 UC ABAP + J2EE Add-on

Hi
Systeminfo: Web AS 6.40 UC ABAP + J2EE
OS: IBM AIX
DB: DB2
I get the following error in my callSdmViaSapinst.log:
Aug 31, 2004 10:52:01... Info:
Aug 31, 2004 10:52:01... Info: ============================================
Aug 31, 2004 10:52:01... Info: =   Starting to execute command 'deploy'   =
Aug 31, 2004 10:52:01... Info: ============================================
Aug 31, 2004 10:52:01... Info: Starting SDM - Software Deployment Manager...
Aug 31, 2004 10:52:02... Info: tc/SL/SDM/SDM/sap.com/SAP AG/6.3003.00.0000.20031126161800.0000
Aug 31, 2004 10:52:02... Info: SDM operation mode successfully set to: Standalone
Aug 31, 2004 10:52:03... Info: Initializing Network Manager (55017)
Aug 31, 2004 10:52:03... Info: Checking if another SDM is running on port 55018
Aug 31, 2004 10:52:03... Info: -
Starting deployment -
Aug 31, 2004 10:52:03... Info: Loading selected archives...
Aug 31, 2004 10:52:03... Info: Loading archive '/cdpool/J2EE/J2EE1/J2EE-ENG/JDD/SYNCLOG.SDA'
Aug 31, 2004 10:52:03... Info: Selected archives successfully loaded.
Aug 31, 2004 10:52:03... Info: Error handling strategy: OnErrorStop
Aug 31, 2004 10:52:03... Info: Update strategy: UpdateLowerVersions
Aug 31, 2004 10:52:03... Info: Starting to execute deployment action (deploy) for "synclog".
Aug 31, 2004 10:52:05... Info: Creating connections to database "XID".
Aug 31, 2004 10:52:05... Info: Creating vendor connection to database.
Aug 31, 2004 10:52:06... Error: Creation of vendor connection failed.
Original error message is:
com.ibm.db2.jcc.a.SqlException: Connection authorization failure occurred. Reason: password expired.
Stack trace of original Exception or Error is:
com.ibm.db2.jcc.a.SqlException: Connection authorization failure occurred. Reason: password expired.
        at com.ibm.db2.jcc.b.b.d(b.java:1214)
        at com.ibm.db2.jcc.b.b.b(b.java:932)
        at com.ibm.db2.jcc.b.bb.i(bb.java:637)
        at com.ibm.db2.jcc.b.bb.c(bb.java:229)
        at com.ibm.db2.jcc.b.bb.c(bb.java:77)
        at com.ibm.db2.jcc.b.b.a(b.java:795)
        at com.ibm.db2.jcc.b.b.a(b.java:359)
        at com.ibm.db2.jcc.b.b.a(b.java:296)
        at com.ibm.db2.jcc.b.b.(b.java:194)
        at com.ibm.db2.jcc.DB2Driver.connect(DB2Driver.java:135)
        at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:149)
        at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:472)
        at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:253)
        at com.sap.sdm.serverext.servertype.dbsc.extern.DBSCConnectionManager.createSDMVendorConnection(DBSCConnectionManager.
java:214)
        at com.sap.sdm.serverext.servertype.dbsc.extern.DBSCConnectionManager.createSDMConnections(DBSCConnectionManager.java:
77)
        at com.sap.sdm.serverext.servertype.dbsc.ConnectionManagerDecorator.createSDMConnections(ConnectionManagerDecorator.ja
va:73)
        at com.sap.sdm.serverext.servertype.dbsc.DatabaseTargetSystem.connect(DatabaseTargetSystem.java:140)
callSdmViaSapinst.log (49%)
        at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:253)
        at com.sap.sdm.serverext.servertype.dbsc.extern.DBSCConnectionManager.createSDMVendorConnection(DBSCConnectionManager.
java:214)
        at com.sap.sdm.serverext.servertype.dbsc.extern.DBSCConnectionManager.createSDMConnections(DBSCConnectionManager.java:
77)
        at com.sap.sdm.serverext.servertype.dbsc.ConnectionManagerDecorator.createSDMConnections(ConnectionManagerDecorator.ja
va:73)
        at com.sap.sdm.serverext.servertype.dbsc.DatabaseTargetSystem.connect(DatabaseTargetSystem.java:140)
        at com.sap.sdm.serverext.servertype.dbsc.DBSCDeploymentActionProcessor.executeAction(DBSCDeploymentActionProcessor.jav
a:115)
        at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java
:58)
        at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:181)
        at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.jav
a:51)
        at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler
.java:84)
        at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.j
ava:61)
        at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:78)
        at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:88)
        at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:74)
        at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.doPhysicalDeployment(DeployerImpl.java:121)
        at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:90)
        at com.sap.sdm.control.command.cmds.Deploy.execute(Deploy.java:162)
        at com.sap.sdm.control.command.decorator.AssureStandaloneMode.execute(AssureStandaloneMode.java:54)
        at com.sap.sdm.control.command.decorator.AssureOneRunningSDMOnly.execute(AssureOneRunningSDMOnly.java:61)
        at com.sap.sdm.control.command.decorator.SDMInitializer.execute(SDMInitializer.java:52)
        at com.sap.sdm.control.command.decorator.GlobalParamEvaluator.execute(GlobalParamEvaluator.java:60)
        at com.sap.sdm.control.command.decorator.AbstractLibDirSetter.execute(AbstractLibDirSetter.java:46)
        at com.sap.sdm.control.command.decorator.ExitPostProcessor.execute(ExitPostProcessor.java:48)
        at com.sap.sdm.control.command.decorator.CommandNameLogger.execute(CommandNameLogger.java:49)
        at com.sap.sdm.control.command.decorator.AdditionalLogFileSetter.execute(AdditionalLogFileSetter.java:65)
        at com.sap.sdm.control.command.decorator.AbstractLogDirSetter.execute(AbstractLogDirSetter.java:52)
        at com.sap.sdm.control.command.Command.exec(Command.java:42)
        at SDM.main(SDM.java:21)
Aug 31, 2004 10:52:06... Error: Execution of deployment action for "synclog" aborted:
Db connect failed.
Aug 31, 2004 10:52:06... Error: Deployment NOT successful for synclog
Aug 31, 2004 10:52:06... Error: -
At least one of the Deployments failed -
Aug 31, 2004 10:52:06... Info: Summarizing the deployment results:
Aug 31, 2004 10:52:06... Error: Aborted: /cdpool/51030277/J2EE1/J2EE-ENG/JDD/SYNCLOG.SDA
Aug 31, 2004 10:52:06... Error: Processing error. Return code: 4
Why is it saying that my password has expired? I have logged on with user J2EE_ADMIN using the SAPGUI and that works fine. I can't use the java configtool since I'm getting an error when I'm trying to start it.
br
Göran

Hi,
We are getting same error. Please tell us what fix it.
Thanks and Regards
Sanny

Where to get WAS ABAP+J2EE 6.0

Similar Messages

Maybe you are looking for