Where to get windows 7 home premium 64 bit

Hi
I build gaming computer what`s the best place to buy cheap software for my computers ?? I need some for $25/cd
thank you

Please see: Microsoft Windows
7 Home Premium SP1 64-bit - OEM
Note: You cannot buy genuine, authentic, Microsoft Windows 7 software for $25.
Carey Frisch

Similar Messages

Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again

Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again and keep getting the same message. Please help !

See Troubleshooting issues with iTunes for Windows updates.
For downloading issues see the further information area and use a different browser and/or the direct links.
tt2

Hollie**it! I can't even open iTunes anymore.I have Windows 7 Home Premium 64 Bit. I tried to update iTunes twice today. This is what I get: Runtime error! Program: C:\Program Files (x86)\iTunes\iTunes.exe R6034 An application has made an

Hollie**it!
I can't even open iTunes anymore.I have Windows 7 Home Premium 64 Bit. I tried to update iTunes Trice Now. This is what I get: Runtime error! Program: C:\Program Files (x86)\iTunes\iTunes.exe. R6034 An application has made an

Hello there, Vinnie.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I have a HP Pavillion DV61355dx windows 7 home premium 64 bit sp1

Hi I have a HP Pavillion DV6-1355 dx windows 7 Home premium 64 bit and I have some major issues ,first when I bought this computer I turned it on it automatically connected and downloaded a whole bunch of stuff I am not even sure what all ,my P/N #VM222UA#ABA , S/N [Personal Information Removed] I dont even know what should and shouldnt be on here anymore . It has a sticker in keyboard area at bottom right corner and a windows 7 sticker says Intel Duo core and yet I get troubleshooters refering to Vista ,AMD ,and several other computers .In my device manager it has a bunch of stuff with little yellow gears .I feel it has down loaded my old computers which I dont have but 1 and my current ones which are all windows 7 64 bit . I was gong to scare my husband by starting his prinnter from mine wasnt even sure what I was doing but I do remeber it saying that I would have to be in control over the pcs I cant remember exactly and I also wanted to make sure updates were done because my husband never did them so I thought great they will get regular updates. At that time we had 3 windows xps 1 professional 64 bit,1 hp media center 2005 64 bit and a windows xp home edition 32 bit .I didnt know much about pcs then I sought help but never got it resolved we had a differnt router and i beleave sbc global at time when I did it that computer ended up dieing so I no longer have it but yet I see its hardware listed and I see the AMD listed and SIS and Matrix with dates going back to 2003 and this computer is a 2009 . What I need to know is how to get all the stuff off here that dont belong and the true specs for this notebook we have att now and a cisco E1000 router and I know some how that the stuff from the other computers are on here .Even when I go to the HP support page it will refer to older editions of windows troubleshooters it says under collection information that computer name is LAPTOP which i put down for the other windows 7 with a amd so I could identify the different windows 7 home premiums and I listed this dv6 as laptop .Windows version says 6.1 architecture says amd64. under publisher details it says package version 1.0 publisher Microsoft Windows,network adapter 1.0 Microsoft corporation. PLEASE HELP

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

I am using Windows 7 Home Premium 64-bit OS. I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installa

I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Ei.cfg not being seen by windows installer on Windows 7 Home Premium 64 bit retail disk.

My problem is that the retail disk of Windows 7 Home Premium 64bit has no ei.cfg restrictions. Instead of choosing the correct operating system ID, on install, the .cfg
is coming from some where else installing a custom version of windows that is a different version of windows than on the retail install disk that I have a software key to. Even though it recognizes the key as windows 7 the operating system no longer recognizes
the retail disk it was installed from as the same version of operating system. It seems that there is a pre operating system install to a volume that cant see the ei.cfg file on the windows retail disk. It is something like Windows ME or MCE and it is hard
to get past because it acts like the operating system after install. It looks like there is a complete install of windows 7 but it is only a version of ME or MCE in the 100MB range installed to a partition volume. I am given a User account Profile within
Application Data folder in the system. The actual windows system in its entirety does not exist in the partial virtual operating systems. All the installs are to Partition Volumes on the Partition of a GPT Server Partition on a Disk
on the Hard drive. All Virtual.
Windows 7 Home Premium 64bit and 32bit retail disk is GSP1RMCHPXFRER_EN_DVD. The bios version on my Asus G75VX is American Megatrends version 206, V Bios version 80.04.97.00.13.N62G75500, EC version B14E140001. The operating system version is not the same
as the install disk. The boot configuration is; American Megatrends Bios Aptio Setup Utility installed. :\\?|GLOBALROOT\Device|HarddiskVolume1\EFI\Microsoft\Boot\BCD.Backup.0001 Software build after install is Buildlab 7601.Win7Sp1_rtm.101119-1850 Client install
BuildlabEx 7601.17514.amd64Fre.Win7Sp1_rtm.101119-1850, CSD Build Number 1130, Product ID 00 359-112-0000007-85245, Product ID 55034-112-0000007-05640. System Reserved Partition Volume X:\{F750E6C3-38EE-11D1-85E5-00C04FC295EE} MININT-F26UD4N. Link to 170MB
.reg file in text format http://1drv.ms/1m9RXL7.
The above information was taken after an install from the Microsoft Windows 7 64 bit retail disk purchased at Fry's and installed to my Asus G75VX. It is a Network Managed Client Server configuration that installs from the retail disk.

I have been dealing with this problem since the day I purchased the first notebook from Best Buy configured this way and it was not even an Asus. It was a Samsung Chronos i7. The Asus G75VX I have now is the third notebook in a row purchased from Best Buy
with the configuration right out of the un open retail box. None out of the three came with windows 7 installed. They had windows 8 64bit installed with the configuration. I purchased Windows 7 Home Premium 64 bit attempting to get around the configuration
problem.
My main concern is that I use computers to do my legal documents in court cases in the United States Federal Courts and I am a pro se litigator and I have been litigating a civil action since 2011 that is still open in the federal court. I am also legally
disable and covered by Federal Communications Act FCC Rule 255. This configuration has Telephone software and equipment, Management Software and equipment, and Networking software and equipment all covered within FCC Rule 255. My notebook is unusable for litigation
or personal use as a Publicly Managed Network Client Server. I paid $1350.00 of my Social Security Disability income for the Asus G75VX and another $216.00 for Windows 7 Home Premium 32 and 64 bit DVD and that is not counting a list of other things to
now have a personal notebook computer I have to sat down beside me in public libraries, Colleges etc. to use their computers to do my legal work. It is illegal and total wrong and it is a violation of the Bill of Rights First and Fourth Amendments and Title
VI of the Civil Rights Act of 1964 and the American with Disability Act outside of 255.

15-f019dx downgraded from windows 8.1 to windows 7 home premium 64 bit: need drivers

Hp Pavilion 15-f019dx downgraded from windows 8.1 to windows 7 home premium 64 bit.
Stopped:
Internet driver
Wireless
USB controller
Network Controller
PCI Device
PCI simple communications controller
SM bus controller
maybe other stuff I haven't noticed?
I see others on this forum have had similar problems going back to windows 7. I tried some of their driver solutions that were posted, but to no avail. Can I get some help? Maybe some links to where I can find drivers to help me? Windows update cannot find and automatically install replacement drivers.

Hi:
Looking at the hardware specs for your model you should be able to use all of the W7 x64 drivers and software from the HP Probook 450 G2 on your model except the BIOS and firmware files.
Your model uses the Intel HD graphics driver and the Realtek RTL8188EE wireless card driver.
http://h20565.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943827&swLangOid=8&swEnvOid=4058

HP Notebook w/ Windows 7 Home Premium 64 bit

How do I restore the startup function on my hp notebook with windows 7 Home premium 64 bit bought in 2010? I have run all the diagnostics in systems recovery and everything checks out, however the unit powers up but nothing starts up.
Can someone please help?
Norma Jean

I would suggest going back into the recovery manager and doing a system restore (not recovery) back to a previous point where you know it worked. The other option would be to do a recovery but you will lose all data that is not backed up.
Restore:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01835735&lc=en&cc=us&dlc=en
Recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01867418&lc=en&cc=us&dlc=en
I am an HP employee.
Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

HP CQ41-224 TX : HP Quick Launch Button did not funtion on Windows 7 Home Premium 64 bit

Hello,
I have bought a new notebook HP CQ41-224TX without OS (free dos) and upgrade the momory to 4 Gb.
I have installed this notebook with Windows 7 Home Premium 64 bit and all HP CQ41-224TX driver 64 Bit.
All function on this notebook running well accept Fn+F7 and Fn+F8 (for brightness) do not work.
I have reinstall the HP Quick Launch Button, but nothing changed.
Does Anyone has this problem.? and how to solve this problem.. pls let me konw. Thanks
Regards
Febrianr

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Wi-fi touch mouse x7000 will not stay paired on Windows 7 home premium 64-bit

Product: HP wi-fi touch mouse x7000
Computer: HP Envy sleekbook/ultrabook 6t 1000
O/S: Windows 7 Home Premium 64-bit
Wifi type: Intel 802.11b/g/n WLAN and Bluetooth + WIDI
Error message: none when attempting to pair
I received my HP Envy 6t two days ago and have started the process of loading software and devices. In addition to ordering the PC from hp.com, I also ordered the HP Wi-fi touch mouse x7000. After booting up the PC for the first time and walking through the Windows 7 set-up, I immediately installed the wi-fi mouse.
Upon initial install of the mouse with the provided install CD, I received an error message stating that one of the drivers was not digitally signed and that the version of windows installed did not support unsigned drivers and that the installed device may not work because the driver would not be used. I continued forward with the install and the mouse seemed to be in working order. I then decided to go out to the HP support website and download the latest Windows 7 64-bit driver for the mouse I had. I then ran through the install and the mouse still continued to work. At this point I had not yet rebooted the PC.
I then performed the following steps in the listed order:
- Installed HP Photosmart 4700 series printer with provided install CD and established a connection via wi-fi
- Installed MS Office 2010 SP1
- Started download of automatically identified Windows Updates that were related to the O/S and other installed Microsoft software
- In parallel with the Windows updates download, I installed the latest release of Symantec's Anti-Virus software and updated its software and virus definitions, this all finished prior to the Windows Updates being completely downloaded. I left the default settings as is for the Symantec Anti-Virus configuration.
- The Windows Updates then installed
- Rebooted the PC
After the reboot of the PC was completed, the mouse would not pair at all. I attempted several times where I would go into the HP mouse control and select configuration and then pairing. I would follow the instructions of pressing the connect button and the screen would then say it paired, but the O/S would not recognize it and the mouse would not move. Going back into the mouse control center it then also recognized it was not paired.
I then attempted to uninstall the mouse software and it would get to the point where it was "gathering information" and it showed a full status bar yet it just hung there. I would wait for 15 minutes and then hit cancel and it would still just hang there yet again. After 15 additional minutes of canceling I would just reboot the PC for which the mouse software was still installed but the mouse continued not to pair. I tried the uninstall process 3 times, each with a PC reboot as part of the process because it would just hang.
I am not sure if the install CD installs a 32-bit version of the mouse software and drivers. If so, perhaps I confused the registration of the product by installing the 64-bit driver I downloaded from HP support. I have attempted to install both the 64-bit driver and the 32-bit driver for Windows 7 that I downloaded from HP Support online in which the execution of the installation is successful with no errors. However the pairing continues not to work and the uninstall hangs.
In addition, after the PC bounce, my HP printer was no longer being recognized. Come to find out Symantec is blocking communication of the PC to the router and thus to the printer. So I disbled Symantec and the printer now works but the mouse still does not. I even rebooted the PC after disabling Symantec and attempted to pair, with Symantec still disabled after reboot, then attempted mouse driver re-installs, mouse software uninstalls and still no luck.
So I am at the point where I cannot uninstall the mouse via conventional means and the wi-fi mouse will not pair manually or automatically.
I have not yet circled back to performing another Winows Update check to see if there are any additional updates after the intial download of the ones mentioned earlier. I will plan to do that next time I am on the PC.
Any suggestions?

moirl wrote:
5. I can not get anything off the Blackberry (photos etc.).
As was stated above:
1. Go to Options >> Media Card (or Memory)
(some themes or BlackBerrys may call this "Settings >> Media Card")
2. Check the following settings (if they are not listed this way, then change to reflect the following:
a) Media Card Support: On
b) Mass Storage Mode Support: On
c) Auto Enable Mass Storage: Yes
3. Save the settings and exit
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Boot-up & BIOS probs - H-P Pavilion P6 2130ef - Windows 7 Home Premium 64 bit

Starting up my PC has become an exercise in frustration.. I press the start on/off button and the screen stays black - nothing happens. It's unresponsive to ESC or F11 (to try and get into Recovery manager) or Cont/Alt/Del. It's only by pressing the on/off button at regular intervals that enables me to eventually get to the stage where I can enter my password.
This afternoon I did a Malwarebytescan and also a Disk Clean-up.. Thought I'd fixed it but still the same problem.
When I first got the PC I didn't make a back-up copy of the boot-up as I was waiting for a WD external hard drive - thinking what can go wrong with a new PC..? ☺
I think my BIOS must be corrupted somehow. Is it possible to download a new BIOS?
It's an H-P Pavilion P6-2130ef and I'm running Windows 7 Home Premium 64 bit.
Serial # [Personal Information Removed]
Product # B2J74EA#ABF
Many thanks in advance
P

Many times this is the result of a faulty device attached to the machine that looks like a short to the power supply. Try to disconnect anything that you don't absolutely need and see if it start OK. Try a different mouse and keyboard as well.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Tx2517ca From Windows Vista Home Premium 32-bit to Windows 7 Professional 32-bit

Hi Everyone,
I have a very specific question. I currently am running Windows Vista Home Premium 32-bit, but I want to use Windows 7. However, I want to use Windows 7 Professional 32-bit (rather than Windows 7 Home Premium) and understand that this will require a clean install.
Before I purchase Windows 7 Professional, I want to make sure that this can be done correctly. Does anyone know if this is possible or have already done this?
I have downloaded and ran Windows 7 Upgrade Advisor which told me that I would be able to upgrade to Windows 7 Home Premium or Ultimate, but it does not mention Windows 7 Professional at all. I'm assuming this is because it would require a clean install.
Thanks for your time,
Lauren

thanks ... I see now from your other post that you're probably getting either a "missing QuickTime.msi" message or being told that a "newer version of QuickTime" is installed when you try to go ahead and uninstall QuickTime after you're told about the Key?
Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly this time?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start M

I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start Menu, Task Manager, System Tray, or anywhere else. When I try to open a file, the site tells me Flash player is not installed. I have even downloaded it to a separate folder and ran the install with IE shut down completely. And Shockwave in ENABLED but in 32 bit .I have been trying to get this to work for about 3 weeks now. HELP!!!

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

Illustrator 15.0.2 extremely slow on Windows 7 Home Premium 64-bit

Illustrator has been working nicely on my computer up until the 15.0.2 upgrade. Now it chugs along at a snails pace and locks up/hangs frequently when switch between tools or windows.
My system specs are:
Windows 7 Home Premium 64-bit
Intel i7 Q720 processor
6GB RAM
1GB ATI video card
Is anybody else experiencing extremely slow performance with the 15.0.2 upgrade?

I am having a suspisciously similar issue and I would like to elaborate a bit..
I too have this odd issue where Illustrator works ok (though screen redraw lags) but as soon as I go between programs, whether Notepad, Acrobat or similar simple programs - Illustrator freezes for 5-10 seconds. I go back and forth a lot - looking through documents (pdfs etc.) when I draw so the annoyance is simply unbearable.
I have used Illustrator for ages and roughly 6 months ago I bought a new PC to use at home. Its specs are:
OS: Windows 7 Pro 64 bit
PROC: Intel i7 930
RAM: 12 GB OCZ PLATINUM
GFX: ATI RADEON HD 5870
MOBO: P6X58D
These specs thrashes my specs at work by far and yet Illustrator BOTH CS4 and CS5 runs smooth and hazle free at the old worn out computer at work, while being close to useless at home. I have googled my eyes out and found no solution. Tried clearing the prefs, etc. - which made no difference. Disabled Aero and all other gfx consuming stuff - with absolutelu no improvement. I have even tried flagging Illustrator CS5 as Large Adress Aware... didn't help
I can run all other Adobe CS4 and CS5 (master edition) very good!
Can someone help - I am desperat

Windows 7 Home premium 64 bit SP1 download/install problems

Hi all,
Bought a brand new laptop from an electronics store in Nov. 2010 with Windows 7 Home Premium 64 bit pre-installed.
All is well with being notified of all avail. MS updates and I am fully patched with all of them....except SP1. I have never been notified that sp1 was available to download and install.
I have tried everything.
Checked "winver" and no sp1 is not installed
Downloaded SP1 from MS website which requires validation (passed validation of course) and tried running sp1 from desktop and get error "Directory name is invalid"
Turned off A/V and Firewall ran again and same result. Burned and .iso of sp1 ran it, same result.
Ran in safe mode..same thing
Ran MS troubleshooter and updates are fine
I have KB976902 installed
Windows Update KB2454826 is installed
Reset windows updates
All drivers are current
ran sfc/SCANNOW no errors found.
Only language pack installed is English
Pls help

2011-03-22 09:25:48, Error                 CSI    00000018 (F) c0000103 [Error,Facility=(system),Code=259 (0x0103)] #11503521# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(flags
= (AllowFileNotFound|AllowSharingViolation), handle = {provider=NULL, handle=0}, da = (SYNCHRONIZE|FILE_READ_ATTRIBUTES), oa = @0x24edbd0->OBJECT_ATTRIBUTES {s:48; rd:NULL; on:[27]"\??\C:\Windows\System32\Wat"; a:(OBJ_CASE_INSENSITIVE)},
iosb = @0x24edc80, as = (null), fa = 0, sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|0x00004000), eab = NULL, eal = 0, disp = Invalid)
[gle=0xd0000103]
// MessageId: STATUS_NOT_A_DIRECTORY
// MessageText:
// A requested opened file is not a directory.
#define STATUS_NOT_A_DIRECTORY           ((NTSTATUS)0xC0000103L)
[HRESULT = 0x8007010b - ERROR_DIRECTORY]
1cb694ed6dca5fe: 74c, c0000043, e7, 0, MoveFile ;\SystemRoot\WinSxS\Temp\PendingRenames\77efad174e69cb01cc010000bc103413.WatAdminSvc.exe, \??\C:\Windows\System32\Wat\WatAdminSvc.exe
You have an issue with the Windows Activation technology update KB<cite>971033</cite>
Also the this iNI is damaged.
2011-03-22 09:25:50, Info                  CSI    00000022 Hashes for file member \??\C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Games\Desktop.ini
do not match actual file [l:22{11}]"Desktop.ini" :
So run chkdsk C: /r /f first to make sure your HDD is fine, next run sfc /scannow to check if the damaged files can be restored.
André
"A programmer is just a tool which converts caffeine into code"
Want to install RSAT on Windows 7 Sp1? Check my HowTo: http://www.msfn.org/board/index.php?showtopic=150221

Where to get windows 7 home premium 64 bit

Similar Messages

Maybe you are looking for