Where to look for kernel modules.
how do i find which module i need to use for my VT6102 lan chip?
www.google.com/linux
I took a lazy one second look and it could be "via-rhine"!
Similar Messages
-
Where to Look for Crash Causes
Hi,
G5 for 3 years; rock solid. Don't recall installing anything unusual (other than Apple SW updates) but twice now in the last week I have retunred to the system after being at work to find screen turned off and fans at full pelt. In the early days when I had a couple of kernel panics I knew where to look for the logs. I havce investigated every log (from System Profiler) for both of these "meltdowns" but can't find any reference at all.
How do I go about pinpointing the cause?
David
PS: Apologies in advance - cross posting in OSX and G5 because I don't know which is the most relevant?Just to answer my own question. Found this in system log, and these are the last entries before the reboot:
================================================
Jun 27 11:26:14 David-Thorpes-Computer ntpd[160]: time set -0.943959 s
Jun 27 11:31:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 352 bus resets in last minute.
Jun 27 11:34:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 344 bus resets in last minute.
Jun 27 11:38:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 351 bus resets in last minute.
Jun 27 11:41:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 341 bus resets in last minute.
Jun 27 11:44:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 356 bus resets in last minute.
Jun 27 11:47:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 352 bus resets in last minute.
Jun 27 11:48:19 David-Thorpes-Computer kernel[0]: Bad SelfID packet 4: 0x0 != 0xffffffff!
Jun 27 11:50:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 362 bus resets in last minute.
Jun 27 11:54:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 356 bus resets in last minute.
Jun 27 11:57:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 361 bus resets in last minute.
Jun 27 12:00:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 363 bus resets in last minute.
Jun 27 12:03:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 362 bus resets in last minute.
Jun 27 12:06:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 356 bus resets in last minute.
Jun 27 12:10:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 356 bus resets in last minute.
Jun 27 12:13:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 353 bus resets in last minute.
Jun 27 12:16:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 359 bus resets in last minute.
Jun 27 12:19:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 362 bus resets in last minute.
Jun 27 12:22:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 364 bus resets in last minute.
Jun 27 12:26:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 363 bus resets in last minute.
Jun 27 12:29:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 365 bus resets in last minute.
Jun 27 12:32:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 366 bus resets in last minute.
Jun 27 12:35:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 368 bus resets in last minute.
Jun 27 12:38:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 359 bus resets in last minute.
Jun 27 12:42:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 359 bus resets in last minute.
Jun 27 12:45:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 363 bus resets in last minute.
Jun 27 12:48:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 360 bus resets in last minute.
Jun 27 12:51:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 360 bus resets in last minute.
Jun 27 12:54:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 358 bus resets in last minute.
Jun 27 12:58:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 366 bus resets in last minute.
Jun 27 13:01:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 357 bus resets in last minute.
Jun 27 13:04:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 366 bus resets in last minute.
Jun 27 13:07:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 364 bus resets in last minute.
Jun 27 13:10:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 355 bus resets in last minute.
Jun 27 13:14:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 364 bus resets in last minute.
Jun 27 13:17:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 364 bus resets in last minute.
Jun 27 13:20:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 360 bus resets in last minute.
Jun 27 13:23:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 368 bus resets in last minute.
Jun 27 13:26:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 363 bus resets in last minute.
Jun 27 13:30:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 355 bus resets in last minute.
Jun 27 13:33:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 359 bus resets in last minute.
Jun 27 13:36:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 357 bus resets in last minute.
Jun 27 13:39:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 361 bus resets in last minute.
Jun 27 13:42:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 360 bus resets in last minute.
Jun 27 13:46:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 367 bus resets in last minute.
Jun 27 13:49:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 367 bus resets in last minute.
Jun 27 13:52:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 363 bus resets in last minute.
Jun 27 13:55:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 362 bus resets in last minute.
Jun 27 13:58:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 360 bus resets in last minute.
Jun 27 14:02:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 356 bus resets in last minute.
Jun 27 14:05:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 364 bus resets in last minute.
Jun 27 14:08:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 360 bus resets in last minute.
Jun 27 14:11:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 353 bus resets in last minute.
Jun 27 14:14:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 356 bus resets in last minute.
Jun 27 14:18:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 363 bus resets in last minute.
Jun 27 14:21:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 367 bus resets in last minute.
Jun 27 14:24:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 367 bus resets in last minute.
Jun 27 14:27:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 363 bus resets in last minute.
=============================================
Now, a couple of weeks ago I installaed a Lacie PCI Firewire 800 card and attached three Lacie FW 800 drives (previously these were all daisy-chained off the one FW 800 port on the G5 and have worked without issue for two to three years).
Could these messages be a cause of the crash? Anybody know what they might mean?
David -
Where to Look for Cause of Freeze?
Hi,
G5 for 3 years; rock solid. Don't recall installing anything unusual (other than Apple SW updates) but twice now in the last week I have retunred to the system after being at work to find screen turned off and fans at full pelt. In the early days when I had a couple of kernel panics I knew where to look for the logs. I havce investigated every log (from System Profiler) for both of these "meltdowns" but can't find any reference at all.
How do I go about pinpointing the cause?
David
PS: Apologies in advance - cross posting in OSX and G5 because I don't know which is the most relevant?Just to answer my own question. Found this in system log, and these are the last entries before the reboot:
================================================
Jun 27 11:26:14 David-Thorpes-Computer ntpd[160]: time set -0.943959 s
Jun 27 11:31:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 352 bus resets in last minute.
Jun 27 11:34:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 344 bus resets in last minute.
Jun 27 11:38:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 351 bus resets in last minute.
Jun 27 11:41:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 341 bus resets in last minute.
Jun 27 11:44:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 356 bus resets in last minute.
Jun 27 11:47:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 352 bus resets in last minute.
Jun 27 11:48:19 David-Thorpes-Computer kernel[0]: Bad SelfID packet 4: 0x0 != 0xffffffff!
Jun 27 11:50:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 362 bus resets in last minute.
Jun 27 11:54:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 356 bus resets in last minute.
Jun 27 11:57:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 361 bus resets in last minute.
Jun 27 12:00:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 363 bus resets in last minute.
Jun 27 12:03:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 362 bus resets in last minute.
Jun 27 12:06:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 356 bus resets in last minute.
Jun 27 12:10:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 356 bus resets in last minute.
Jun 27 12:13:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 353 bus resets in last minute.
Jun 27 12:16:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 359 bus resets in last minute.
Jun 27 12:19:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 362 bus resets in last minute.
Jun 27 12:22:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 364 bus resets in last minute.
Jun 27 12:26:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 363 bus resets in last minute.
Jun 27 12:29:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 365 bus resets in last minute.
Jun 27 12:32:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 366 bus resets in last minute.
Jun 27 12:35:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 368 bus resets in last minute.
Jun 27 12:38:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 359 bus resets in last minute.
Jun 27 12:42:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 359 bus resets in last minute.
Jun 27 12:45:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 363 bus resets in last minute.
Jun 27 12:48:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 360 bus resets in last minute.
Jun 27 12:51:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 360 bus resets in last minute.
Jun 27 12:54:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 358 bus resets in last minute.
Jun 27 12:58:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 366 bus resets in last minute.
Jun 27 13:01:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 357 bus resets in last minute.
Jun 27 13:04:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 366 bus resets in last minute.
Jun 27 13:07:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 364 bus resets in last minute.
Jun 27 13:10:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 355 bus resets in last minute.
Jun 27 13:14:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 364 bus resets in last minute.
Jun 27 13:17:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 364 bus resets in last minute.
Jun 27 13:20:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 360 bus resets in last minute.
Jun 27 13:23:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 368 bus resets in last minute.
Jun 27 13:26:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 363 bus resets in last minute.
Jun 27 13:30:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 355 bus resets in last minute.
Jun 27 13:33:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 359 bus resets in last minute.
Jun 27 13:36:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 357 bus resets in last minute.
Jun 27 13:39:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 361 bus resets in last minute.
Jun 27 13:42:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 360 bus resets in last minute.
Jun 27 13:46:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 367 bus resets in last minute.
Jun 27 13:49:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 367 bus resets in last minute.
Jun 27 13:52:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 363 bus resets in last minute.
Jun 27 13:55:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 362 bus resets in last minute.
Jun 27 13:58:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 360 bus resets in last minute.
Jun 27 14:02:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 356 bus resets in last minute.
Jun 27 14:05:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 364 bus resets in last minute.
Jun 27 14:08:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 360 bus resets in last minute.
Jun 27 14:11:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 353 bus resets in last minute.
Jun 27 14:14:59 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 356 bus resets in last minute.
Jun 27 14:18:11 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 363 bus resets in last minute.
Jun 27 14:21:23 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 367 bus resets in last minute.
Jun 27 14:24:35 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 367 bus resets in last minute.
Jun 27 14:27:47 David-Thorpes-Computer kernel[0]: FireWire (OHCI) TI ID 8025 PCI: 363 bus resets in last minute.
=============================================
Now, a couple of weeks ago I installaed a Lacie PCI Firewire 800 card and attached three Lacie FW 800 drives (previously these were all daisy-chained off the one FW 800 port on the G5 and have worked without issue for two to three years).
Could these messages be a cause of the crash? Anybody know what they might mean?
David -
Mac server hangs every few days. where to look for cause?
I have a Mac server that hangs every few days and requires a hard reboot.
It is run headless so we have no screen feed back of what is happening when it hangs.
It is possible that just the network communications fail. But it is in software because a reboot restores the situation everytime.
I could use some advice on where to look for possible causes: which logs, or dumps that are produced by the system.
ThanksThese instructions must be carried out as an administrator.
Launch the Console application.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. A few dozen lines are almost always more than enough.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Where to look for the computed stats collected using gather_table_stats
I have used analyze command before but new to gather_table_stats.
I have executed gather_table_stats procedure as given below. Now where to look for the statistics estimated and also what are the important parameters I need to look in the stats ? Any major difference between analyze & gather_table_stats ?
SQL> exec dbms_stats.gather_table_stats(ownname => 'TPDBS01A', tabname => 'x_TPD_STG_TL_SF_LEGAL_OWN
ER' , estimate_percent => 50, method_opt => 'for all indexed columns size auto');
PL/SQL procedure successfully completed.The command "analyze table" is deprecated for gathering optimizer statistics. But it is still the only command to get for instance the chained rows. This command is no longer maintained for new features, so if you use this command to collect statistics, it might not collect all needed numbers for the optimizer so the plan could be wrong.
The package dbms_stats is collecting all the figures that the optimizer needs to genererate an optimal access plan. All new database features are incorporated only here.
The statistics numbers can be found in the normal tables like USER|ALL|DBA_TABLES, ...TAB_COLUMNS, ...INDEXES, ...IND_COLUMNS etc. There you can find for instance number of rows in table, clustering factor for indexes and more numbers like this. They are not really needed for us human beings, they are used by the optimizer to generate the access plan. -
Where to look for all value mappings being used in ID
Hi All,
Where to look for all value mappings being used in ID?
XIerHi,
Let me re-frame it, Do u want to know where all the value mappings(created in ID) is used in Mapping Program of IR, isn't it?
If yes, then it's not possible( as far as I know).
raj. -
Thanks, the write-up was informative, But it do not answer for my question, that is where to look for serial # on my Macbook Pro Mid 2010 White Unibody Core 2 Duo 2.4 GHz 13.3"? Its not on bottom-case and the above article does not mention this model?
Click on the Apple and then on about this Mac. In the new window, click on the "version 10.9.2" until you see the serial number displayed.
-
(Help) system classpath -Vs- the place where weblogic looks for classes
The following is my app's hierarchy.
myapp
|
|__myjsp.jsp
|
|__WEB-INF
|
|__classes
|_ MyClass.class
I am not able to use MyClass within myjsp.jsp
i.e. a scriplet like that shown below gives an error stating that MyClass isnt found
<% MyClass obj; %>
I've tried setting the system classpath, but to no avail.
Is there a difference between the system classpath and the place where weblogic looks for classes?
(I am running my app by creating a myapp.war file and placing it in autodeploy folder)Try moving your class to a named package and use the appropriate import statement in your JSP. Loading it from WEB-INF/classes/packagename should be fine so you might want to remove the other classpath mods you made to eliminate that uncertainty.
Here's a snippet from http://publib.boulder.ibm.com/infocenter/dmndhelp/v6rxmx/index.jsp?topic=/com.ibm.websphere.nd.doc/info/ae/ae/rweb_jsp_migration.html:
"As of JSP 2.0, referring to any classes from the unnamed or default package is not allowed. This can result in a translation error on some containers, specifically those that run in a JDK 1.4 or greater environment which will also break compatibility with some older JSP applications. However, as of JDK 1.4, importing classes from the unnamed package is not valid. See Java 2 Platform, Standard Edition Version 1.4.2 Compatibility with Previous Releases for details. Therefore, for forwards compatibility, applications must not rely on the unnamed package. This restriction also applies for all other cases where classes are referenced, such as when specifying the class name for a tag in a Tag Library Descriptor (TLD) file."
HTH,
Mike
Weblogic/J2EE Security Blog: http://monduke.com -
Looking for function module to update User data
Hi All,
I'm looking for function module/base table to update data into User (User-Specific Data) data. You can notice it under PRTE t.code. Thank you.
Regards
KishoreTo Read: HRTRV_IF_GET_TRIP
To Modify: HRTRV_IF_MODIFY_TRIP
Please be aware that these FMs are not released for customers, i.e. you won't get any support for them.
EDIT: Since you are dealing with Structure USER/PTK99, maybe the document I created is of interest to you: Adding fields in Travel WDA Applications
Cheers, Lukas
Message was edited by: Lukas Weigelt -
i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.
Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom -
How do we change de location where iMovie looks for its projets and event ?
Would you know how to change de location where iMovie looks for its projets and events ?
I want to put those on an external disk.You must do this within iMovie.
In iMovie, click VIEW/GROUP EVENTS BY DISK
This will show all properly formatted external disks (must by HFS+ journalled, not FAT32)
Now you can drag your Events to the disk by dragging and dropping the Event Name to the icon of the disk in the Event Source List in iMovie.
You can also move projects. See iMovie Help for details. -
Hello All,
I m looking for function modules for the following functionalities :
1. Returns a list of purchase orders.
2. Returns a list of vendors of a metarial/materialgroup.
3. Getting details of a vendor evaluations
Thanks all
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on Nov 3, 2011 9:50 PMHi,
for CALL FUNCTION 'GET_FIELDTAB'
Replacement suggested is :
DDIF_NAMETAB_GET or CACS_GET_TABLE_FIELDS or CL_ABAP_TYPEDESCR=>DESCRIBE_BY_NAME
for NAMETAB_GET'
Replacement suggested is :
'DDIF_NAMETAB_GET'
for more info
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=68191235
hope it helps you.
Thanks! -
Hello Friends ,
I am a starter in Oracle Apps. I am a self-learner. Pls help me with the answer to the following questions, if you please.
Question 1:- If you are assigned the task of a modifying or customising a particular report in a Apps , in which folder/directory are you going to look for it ??
Question 2:- In Oracle Apps after modifying an existing Report where do you store/save it? After you modify an existing Report in Oracle Apps do you need to follow the usual procedure of registration in AOL like you do for a new report ??
Thanks,
Sujay G.Hi Aali;
Please check below notes which could be helpful for your issue:
Re: finding lists of reports
Regard
Helios -
I RECENTLY PURCHASED WORKOUT MUSIC FROM POWER MUSIC. I HAVE DOWNLOADED THEM TO ITUNES. WHERE DO YOU LOOK FOR THE DOWNLOADED FILES IN ITUNES? I AM NOT REALLY COMPUTER SAVVY. I WOULD ALSO LIKE TO DOWNLOAD THEM TO MY MP3 PLAYER APPRECIAAND HOW DO I GO ABOUT DOING THAT? THANK YOU FOR ANY HELP. GREATLY APPRECIATED.
Please turn off your caps lock.
All caps indicates shouting, is considered rude, and is difficult to read. Many will not read such posts.
Your music will be in Library>Music on the left side of the itunes page.
Itunes only syncs with Apple devices. -
Looking for function module to clear document structure
Hello,
we want to use Easy DMS for quick check-in of documents. Therefore we need a folder (document structure) to move all new documents in this fixed defined folder. Now we want to clear every night this folder. Does anybody know, which function module could I use?
Thanks a lot for any support.
Best regards.
MarkusHello Iring,
thanks a lot for your answer. BAPI_DOCUMENT_CHANGE2 is a solution, but in this case I have to read everytime all documents. In my case I know already the folder number (document structure) and therefore I'm looking for a function module to give just the folder number to clear, which would be the best way from performance side.
Anyway thanks a lot for your answer.
Regards.
Markus
Maybe you are looking for
-
I purchased a Seagate 5T external harddrive which stated it was for both Mac and PC. I want to partition the drive so I can have a partition for time machine and a partition for drag and drop. My Mac book pro 17inch model has parallels. I would like
-
Hi all, When we create a orginal application file in a DIR , we can create an additional file with original application file. Such additional file can be template or layout or picture. I am able to create an addtional file with original application f
-
How to change MM/DD/YYYY to DD/MM/YYYY
hi i have a requirement. CONCATENATE SY-DATUM TEXT-T01 SY-UNAME INTO V_TEXT. here sy-datum is in the format of MM/DD/YYYY now i have to replace sy-datum with DD/MM/YYYY. Thanks, Maheedhar.T
-
Create inbound delivery in EWM (Custom)
Hi, I would like to create an inboud delivery in EWM through a custom program. Are there any function modules or class methods that can simulate the standard transaction /SCWM/GR? Thank you.
-
Questions on making Movies with new camcorder
Hi all, First, let me say these forums are extremely useful. Thanks for taking a minute to read (and maybe respond). I have a couple of questions / need some advice about making iMovies with my new camcorder. My camcorder is a Sony DCR-SR40 - it's a