Where to look for more information on Banner message?

I just upgratded my OPM 1.1 to 2.0.Now I get a banner messaage for one of my clusters which states "Unable to consistently collect from Cluster MyCluster (MyCluster)." I read the online help and understand that it was not able to successfully get more than 95% of the performance data collections during the last 24 hrs.But where can I see how many were actually missed and when? I checked the cluster and it was available during the whole time and if OPM had a problem, I would expect seeing this banner at more than just one cluster (actually monitoring 8). Kind regards, Niels

In the autosupport (trigger from GUI or VM console) and support bundle (triger from VM console) there are acquisition logs.  Check these for more info. Kind Regards,Chris MaddenStorage Architect, NetApp EMEA

Similar Messages

  • Unable to load Facebook on MBP in any browser - looking for more information

    I have searched the Internet far and wide trying to figure out what is wrong, but every suggestion I have tried has failed.  So here is my question:
    Last night, I turned on my MBP and tried to log onto Facebook.  I use Google Chrome as my default browser.  Chrome was unable to connect to www.facebook.com.  I tried in Safari also with no luck.  Facebook seems to be the only web site I cannot connect to.  Over the same wifi connection, I was able to connect to Facebook from my home PC, my iPad, and my iPhone (the actual web site and thru the app).
    This morning, I brought my MBP to work to try again.  Same problem.  I cannot access Facebook from my MBP, but I can from my work PC and my other iOS devices.  I even tried turning Personal Hotspot on my iPad and connected my MBP to that.  Still no luck.
    Based on everything I've read online, I've done many things to try to resolve this.  I've cleared my cache and cookies, I've rebooted my MBP several times, I've flushed my DNS.  I've even tried using Open DNS.  I even tried some of the more ridiculous sounding ideas, like changing the date on my MBP.  I am currently running Sophos in hopes that maybe the reason this is happening is because of some malware or trojan or something.  The only thing I HAVEN'T done yet is completely reinstalled Mountain Lion.  Honestly, I would rather avoid having to try this approach, as it seems that is a slightly extreme approach to fixing what should be a relatively straightforward problem to diagnose.
    I've been racking my brain, trying to think of any updates I could have done in the last day or two that might have caused this very specific problem.  According to System Information, the last set of updates I probably made right before this problem manifested were for Microsoft Office.  I'm showing "Office 2011 14.2.5 Update", "Microsoft Error Reporting for Mac", and the very cryptic sounding "Plugin" as all having been installed yesterday.  Based on the times each was installed, "Plugin" was not installed with the Office updates, so I'm wondering if maybe that is the culprit.  Unfortunately, I have no more information than that.
    I guess what I'm looking for are ideas on how I can better diagnose what is going on.  I've tried the solutions people have posted online to no avail. If I knew what was happening behind the scenes, that might help me figure out what I really need to do to get this working again, before I'm forced to resort to a reinstall of Mountain Lion that may or may not even resolve this issue.  If anyone has better ideas on what could be wrong or ways in which I can get more information to better diagnose this problem, please post them here.  Thank you!

    I didn't think reinstalling was gonna do me any good except for getting rid of every single thing I have ever installed since getting this MBP.  I'm thinking it has to be something that is on my computer causing this, especially since it only affects my ability to get to this one site and I only started seeing this problem yesterday.
    So, I went ahead and disabled all my Chrome extensions and I don't have any Safari extensions at all.  That didn't fix my issue.
    I've been trying to run Sophos on here, thinking that maybe I've got a Trojan or some kind of malware, but it never seems to finish a full scan of my hard drive.  That "Plugin" that I mentioned above has me very suspicious, except that whatever that is, it's been on my computer since basically when I first got it.  Maybe it's malicious, or maybe it's just a poorly named piece of software.  In any case, it got updated last night around 11pm, about the same time I noticed my problem.  After trying everything I have, it's hard for me to overlook that as coincidence.
    But, where do I go to gain more information about what that could be?  I should mention that this MBP is basically my first Apple computer.  I've been a PC guy (still am mostly) forever, but I finally dove in and got a Mac to start iOS development.  So I'm sure there are ways to get more information than I am currently aware of.
    Also, apologies if I posted this in the wrong forum.

  • Where can i find more information about factory sampler instruments? such as what synth was sampled, what chord has been sampled etc.

    im looking for more information about what chords have been sampled for use in the exs24 "chords" sampler instruments and more specifically wether they're major/minor and with 7ths,9ths,11ths etc.  i know this could be worked out with someone with the skill to do it but unforunately that's not me. It'd be convienient if information like this was included somewhere in the documentation like it is with most other commercial sample packs.

    Don't post order information or other personal information here. We're all just fellow users here - you are not communicating with Apple when you post here - and so posting such information just risks your privacy. I've asked the Hosts to remove all the private information from your post.
    The serial number was included in the box ARD came in; the Apple Store will not have a record of it. If you've lost the serial number, you'll need to purchase a new copy of ARD, probably a good idea anyway since 2.2 won't run on any version of Mac OS X since, if memory serves, 10.4. It's a lot cheaper through the Mac App Store than it was back when you first purchased.
    Regards.

  • Reversi Sample - "The project requires user input. Reload the project for more information."

    A week ago, I downloaded the sample code examples.  Then I extracted the reverse sample code, loaded it and ran it.  All was well.
    I was just using it as a resource for example code, so no code changes.  Now, when I open the project, I get nothing loaded.
    Solution explorer displays       Solution 'Reversi' (0 Projects).    Below that
    "The project requires user input.  Reload the project for more information."
    This message shows for all three sections  Reversi, ReversiGameComponet, and ReversiComponentTests.
    Ok, so I figure I must have accidently changed something.  So, I re-extract.  Same message. 
    The only thing I can think of is that in the options, I changed the startup location for my projects.  I like to keep my code projects on the d: drive, so I changed that to D:\!!!W8.  I've always done this so that when I create a new project,
    it does it in my project directory by default.  Didn't change anything else such as the templates dir.
    I did set this back to the c:....projects, as where templates are, but that didn't help.  So, I reset to my projects directory.
    My project that I created loads ok.
    Suggestions?

    A week ago, I downloaded the sample code examples.  Then I extracted the reverse sample code, loaded it and ran it.  All was well.
    I was just using it as a resource for example code, so no code changes.  Now, when I open the project, I get nothing loaded.
    Solution explorer displays       Solution 'Reversi' (0 Projects).    Below that
    "The project requires user input.  Reload the project for more information."
    This message shows for all three sections  Reversi, ReversiGameComponet, and ReversiComponentTests.
    Ok, so I figure I must have accidently changed something.  So, I re-extract.  Same message. 
    The only thing I can think of is that in the options, I changed the startup location for my projects.  I like to keep my code projects on the d: drive, so I changed that to D:\!!!W8.  I've always done this so that when I create a new project,
    it does it in my project directory by default.  Didn't change anything else such as the templates dir.
    I did set this back to the c:....projects, as where templates are, but that didn't help.  So, I reset to my projects directory.
    My project that I created loads ok.
    Suggestions?
    Hi there,
    Can you provide the link for the sample code example so I can download and try on my machine?
    Regards,

  • When i sync my ipad to itunes I get a message on the screen 12 songs did not sync to ipad see itunes for more information. how do I determine what songs did not sync where in itunes is this information stored

    the old version of itunes had a drop down box listing songs that did not sync newer version does not how can i see what songs did not sync,  The box message on the screen says 19 items did not sync to your ipad, see itunes for more information.  Where do I look??

    Hello Tonchee
    If you are seeing an Apple ID that is not yours, then you have purchased content on your iPad that is tied to that Apple ID. You would need to know that password or remove the content that is associated with that Apple ID.
    Using your Apple ID for Apple services
    http://support.apple.com/kb/ht4895
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • N unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

    some one can help me please
    i have no idea what i must to do.
    an unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

    The Exception Handler gave all the info that you need. No need to print the whole stack trace.
    The exception handler says
    Exception Details: java.lang.IllegalArgumentException
    TABLE1.NAME
    Look in the session bean (assuming that is where your underlying rowset is). Look in the _init() method for statements similar to the following:
    personRowSet.setCommand("SELECT * FROM TRAVEL.PERSON");
    personRowSet.setTableName("PERSON");
    What do you have?

  • HT204347 Thanks, the write-up was informative, But it do not answer for my question, that is where to look for serial # on my Macbook Pro Mid 2010 White Unibody Core 2 Duo 2.4 GHz 13.3"? Its not on bottom-case and the above article does not mention this m

    Thanks, the write-up was informative, But it do not answer for my question, that is where to look for serial # on my Macbook Pro Mid 2010 White Unibody Core 2 Duo 2.4 GHz 13.3"? Its not on bottom-case and the above article does not mention this model?

    Click on the Apple and then on about this Mac. In the new window, click on the "version 10.9.2" until you see the serial number displayed.

  • I cannot transfer movies on my iphone 4s eventhought its mp4 format. it say 1 item could not be sync see itunes for more information. Tried to look for the reset warning on itunes 11.0 but cannot locate it. Help please

    i cannot transfer movies on my iphone 4s eventhought its mp4 format. it say 1 item could not be sync see itunes for more information. Tried to look for the reset warning on itunes 11.0 but cannot locate it. Help please

    Hello eLZhi,
    Thanks for the question, and welcome to Apple Support Communities.
    The following article provides the most relevant information to your question:
    iOS: 'Not enough free space' alert when trying to sync
    http://support.apple.com/kb/TS1503
    Thanks,
    Matt M.

  • Since one week my iphone, after synchronisation, gives me error message 13 objects could not get synchronized, look in itunes for more information. however, I dont find any info there

    since one week my iphone, after synchronisation, gives me error message "13 objects could not get synchronized, look in itunes for more information." however, I dont find any info there, neither on the mac I synch with nor on the iphone

    Launch Disk Utility in /Utilities. Then, click on the volumes under the top-level disk. The one that has this listed on the bottom is the boot volume.

  • HT1386 my iphone says " 33 items could not be synced, see itunes for more information" , where is this information?

    I have been syncing my music from my laptop to iphone, no problem until now, a message says " 33 items could not be synced, see itunes for more information", can't find any information that helps me, so, how do I sync these 33 items?  help

    I have the same problem! I have searched around this site and I can't find anyone who knows.

  • " 3 items could not be synced. See iTunes for more information"  I have searched and I have tried the solutions on the forum. My iPhone has been successfully synced without error and I am trying to sync with new laptop.

    " 3 items could not be synced. See iTunes for more information"  I have searched and I have tried the solutions on the forum. My iPhone has been successfully synced previously on my mac mini without error. I am trying to sync my iPhone with new MacBook Pro.

    Modular77:  With respect the dialog on the iPhone 'XX items could not be synced.  See iTunes for more information.' , would you happen to know where to look in iTunes?  I looked in all the places that seemed logical to me. 
    I am, however, asking only for future reverence, as the initial sync which generated the error dialog was done via USB, and almost immediately after the USB sync, I ran a WiFi Sync—two in a row in fact—both initiated from the iPhone.  Both WiFi syncs completed successfully with no error dialog. 
    I then ran another USB sync initiated from iTunes on the Macintosh, as was the first sync which gave the error. This second USB sync also completed successfully with no errors.
    I think someone in this thread mentioned non-AppleStore products or DMR issues which I think could not have been an issue in my case, as I was running the sync to install updated Apps from the AppStore, and additionally had deleted some music and movie items to make sure there was room for the App updates. Nothing was added other than the recently downloaded App updates from the AppStore. 
    iPhone3GS  iOS 5.1.1 build 9B206. 
              Developer Profile enabled.  iCloud enabled.
              32 GB “disk.” About 1.5 GB free after sync.
              iPhone NOT jailbroken
    MacBook 13-inch Aluminum, Late 2008 (NOT Macbook Pro)
         Lion 10.4.7 build 11E53.  2 GB RAM.
    Thanks for any info or advice.  Problem IS now solved, but it absorbed a lot of time to reach that point.

  • Mac server hangs every few days. where to look for cause?

    I have a Mac server that hangs every few days and requires a hard reboot.
    It is run headless so we have no screen feed back of what is happening when it hangs.
    It is possible that just the network communications fail. But it is in software because a reboot restores the situation everytime.
    I could use some advice on where to look for possible causes: which logs, or dumps that are produced by the system.
    Thanks

    These instructions must be carried out as an administrator.
    Launch the Console application.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
    If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
    ☞ When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    ☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    ☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • 3 items could not be synced see itunes for more information

    HI
    Is there any solution of my problem ?
    Actually I have iphone 4 and while transfering data from my pc to my iphone 4 I can transfer music and photo and all but not the video, whenever i try to transfer video after apply or sync my phone syncs but on my iphone i see a message that ( ) items could not be synced see itunes for more information.
    Please suggest me how to fix this problem and transfer video to my iphone 4 i have tried it by deleting cache folder also but all in vain.
    Please suggest me some effective idea.
    Mahesh Vyas
    Advocate
    Bikaner

    Modular77:  With respect the dialog on the iPhone 'XX items could not be synced.  See iTunes for more information.' , would you happen to know where to look in iTunes?  I looked in all the places that seemed logical to me. 
    I am, however, asking only for future reverence, as the initial sync which generated the error dialog was done via USB, and almost immediately after the USB sync, I ran a WiFi Sync—two in a row in fact—both initiated from the iPhone.  Both WiFi syncs completed successfully with no error dialog. 
    I then ran another USB sync initiated from iTunes on the Macintosh, as was the first sync which gave the error. This second USB sync also completed successfully with no errors.
    I think someone in this thread mentioned non-AppleStore products or DMR issues which I think could not have been an issue in my case, as I was running the sync to install updated Apps from the AppStore, and additionally had deleted some music and movie items to make sure there was room for the App updates. Nothing was added other than the recently downloaded App updates from the AppStore. 
    iPhone3GS  iOS 5.1.1 build 9B206. 
              Developer Profile enabled.  iCloud enabled.
              32 GB “disk.” About 1.5 GB free after sync.
              iPhone NOT jailbroken
    MacBook 13-inch Aluminum, Late 2008 (NOT Macbook Pro)
         Lion 10.4.7 build 11E53.  2 GB RAM.
    Thanks for any info or advice.  Problem IS now solved, but it absorbed a lot of time to reach that point.

  • "Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information" while attempting to open UNIX/Linux monitor

    We have upgraded our System Center to 2012 R2, and we cannot open any of the UNIX/Linux LogFile monitor property or the UNIX/Linux process monitor property for those monitors created prior to the upgrade.  Error we get is below.  Any assitance
    appreciated.
    Date: 9/30/2014 10:01:46 PM
    Application: Operations Manager
    Application Version: 7.1.10226.0
    Severity: Error
    Message:
    System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
       at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
    Boolean suppressSecurityChecks)
       at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
    Boolean suppressSecurityChecks)
       at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
    Boolean suppressSecurityChecks)
       at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection)
       at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
       at System.Reflection.Assembly.Load(String assemblyString)
       at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.TypeContainer.get_ContainedType()
       at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.AddTemplatePages(LaunchTemplateUIData launchData, Form form)
       at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Initialize(Object launchData, Form form)
       at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.RunPrivate(Object[] userData)
       at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Run(Object[] userData)

    It's possible the upgrade did not update everything properly as it looks like a dll mismatch or a missing file. I'd open a support ticket with MS and have a support engineer look at the upgrade logs. What version of SCOM did you upgrade from?
    Regards,
    -Steve

  • There was a problem updating InDesign CC For more information see the specific error below.  Update Failed Download error.  Press Retry to try again or contact customer support.(49)

    Posted the entire text from the error window, when trying to update, using the normal NON-TECHIE way to update any and all Adobe CC products, via the Creative Cloud updater installed when Adobe Creative Cloud subscription was purchased when first offered.
    The following occurs, ad nauseam:
    There was a problem updating InDesign CC
    For more information see the specific error below.
    Update Failed
    Download error.  Press Retry to try again or contact customer support.(49)
    Here's the crux of my frustration:
    (1) Customer Service is NOT contact-able, to receive LIVE help.
    (2) There is NO way for me to mitigate this "Download error", being a student learning InDesign, and NOT in any way capable of tweaking folders/files here and there.
    Therefore, the real question:
    Given that a significant number of subscribers are having the above referenced issue with attempting to download the current update for InDesign, WHAT ARE WE SUPPOSED TO DO, in order to get our contractually paid-for updates to our legally and contractually paid-for Adobe software, specifically in my case, InDesgin's current update?
    Please, NO TECHNICAL mumbo-jumbo which most likely will cause the overwhelming majority of users, like me, to seriously corrupt their computer files, but rather an honest, straightforward "what to do" from real CS/Engineers working for Adobe, as to how to FIX this issue, period.
    ===========================================================
    UPDATE:
    Here is a way in which I think I was able to "update" my InDesign CC application:
    (1) Sign-In to your Adobe Account
    https://www.adobe.com/
    (2) Click on the MENU icon
    (3) Click on the product InDesign icon
    Your browser should display the page for Adobe InDesign CC
    https://www.adobe.com/products/indesign.html?promoid=KLXLU
    (4) Click on the Download icon,
    Your browser should now display the page to download InDesign,
    https://creative.adobe.com/products/download/indesign
    (5) a Pop-Up window should open, and display:
      Launch Application
      This link needs to be opened with an application.
    with the first option to select being the CreativeCloud(URIHandler)
    (5) Select this application and click OK.
    What happened when I followed steps (1) thorugh (5) is that:
    (a) InDesign CC(2014) was installed,
    (b) InDesign CC, updated, and then
    (c) InDesign CC(2014), also updated.
    Why this all worked, is a mystery to me.
    Looks like a separate, "new" version of InDesign, InDesign CC(2014), was installed, the existing "old" InDesign was updated, and then the newly installed Indesign CC(2014) was further updated.
    A BIT MORE, when I launched my InDesign CC app, and checked to see if there were Updates Available, there in fact was an Adobe InDesign CC 64 bit (9.2.2) update.
    I clicked on UPDATE and my "old" InDesign CC app was "successfully updated."
    FURTHER INFO:  I may have neglected to list some important info ... OS:  Windows 8.1 Pro with Media Center, 64-bit
    Confused, I am able to launch BOTH of these apps, and hopefully I may use one of these versions of the InDesign CC app, to do some InDesign work.
    Will keep y'all posted!
    Message was edited by: Richard Yapkowitz, about an hour after I first posted this issue.

    Jackdan error 49 indicates the installer was unable to access a critical file or directory.  You can find additional details at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

Maybe you are looking for

  • How can I get my bookmarks into my new [Windows 7] computer from my old [XP] hard drive?

    I copied Favorites already but they don't show up in Firefox - and I copied before installing Firefox.

  • "Cannot connect to iTunes" message

    I have signed up to icloud as an email as my previous setup went wrong.  I still can not sign into icloud, iTunes, AppStore so I am unable to get started.  I have tried troubleshooting but nothing helped, I changed my city and time, other than that I

  • SD down payment invoice due date

    Hi, Down payment request invoice is generated in SD ,and its clear that the due date in FI document corresponding to this will show the posting date as Due date.but our client needs that the due in downpayment request should be according to the payme

  • N80 MP3 Player Controls Gone Crazy??

    Hi there, Just recently received my N80 v3.0618.0.2 23-05-2006 RM-92 NOKIA N80 (45.02) The problem I am having is with the mp3 player. Some mp3 tracks are over an hour long (long radio shows or dj mixes). When I try and fast forward through to say 01

  • Date Dimension changes format when in dashboard prompt

    Hi I have created a report in OBIEE 10g wherein a dimension is DATE. It displays as MM-DD-YYYY. I also created a dashboard prompt using this dimension. However, when I select a value from the prompt in the dashboard, it says that: "A date value was e