Where to maintain Manfacture & SLED

Hi Experts,
Where we mainatain Manufacture & SLED other than MSC1N(2N,3N),Because i had check MSC3N but there both
fields Manucature Date & SLED are blank,So from where it is picking manufacturing Date ? which i want to edit.
Please provide me some idea!
Thanks & Regards,
Olet malla.

Hi,
to maintain SLED for particular material ,you have to make setting,
You have to activate SLED for your plant,movement type in spro,
and you  have to maintain same in material master(minimum  Remai.SLED or total SLED) in plant data storage location view
then system will give error message while doing goods received or issue ,if not maintain SELD
Regards
Kailas  ugale

Similar Messages

  • FI:where to maintain the data of "Group account number"?

    Hi.When I use the T-CODE FS00 to create G/L account,the sap require me to Make an entry in field "Group account number".But when I press F4 on the field "Group account number",the sap tell me there is no values.So I need to maintain the data of "Group account number".But I don't know where to maintain the data of "Group account number".So I need someone give me the T-CODE or some advice.Thanks so much.

    Hi,
    You have activated group account number. If you have any grp account number of your company please provide the group company account number.
    Else if you dont want to give group account number
    In T-code: OB13 remove group chart of accounts from your chart of accounts
    Best Regards
    Ashish Jain
    Message was edited by:
            Ashish Bohara

  • Where we maintain the cost of  characteristics  values in variant  conf.

    Hello guys,
      This thread i have posted many times in sdn , but never got the satisfactory answer.This time again i am trying my luck.
        Actually i am unable to understand how costing takes place in variant configuration.
        Suppose i have created one sales order for configurable material and there we select all the characteristics values which we want.
    But we don't maintain the prices of these characteristics values anywhere.So when i create the sales order than how the sales people calculate the cost of that order.
        Take a example of computer.For making computer,i want cabinet, processor, Harddisk, Ram, which are available in many sizes.So What we do that we create one configurable material and inside it we maintain all this characteristics and its values.And then i create one sales order for that configurable material and select the suitable characteristics and its values as reqd my customer.
         Now my question is how they cost that sales order?As we don't maintain the Accounting and costing view in material master of configurable material.
       So where to maintain the prices of these characteristics values?
            Plz guide.

    Hi
    You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
    variant conditions to define surcharges and discounts for a variant
    Variant u2013Pricing steps
    Create condition record
    create a procedure where you enter the reference from the characteristic
    Assign the procedures to either the characteristic values
    configure the material in the sales order
    The net price for the material is displayed
    If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
    In addition, the Conditions pushbutton is displayed.
    On pressing this pushbutton,
    One can see which conditions have
    influenced the price.
    I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
    Thanks

  • F110 bank charges where to maintain??

    Dear Expert,
    I am configuring the automatic payment and client required that the bank charges bear by which party will depend on the transaction. I know that I could maintain the instruction key on vendor master data to inform SAP whether bank charges is deduct from beneficiary account or payer account.
    However, for example, for overseas transfer the client need to pay USD10 for bank charges, I mainatained the instruction key 13 on the vendor master data that it pay by beneficiary account. But where to maintain in SAP the USD 10 so when I run F110 the USD 10 bank charge will deduct from the total amount pay and post it to bank charges account?
    Thanks
    Max

    Hi Zubin,
    As far as I know the setting you suggested is only for pritning on the form and no bank charges poting will be carried on. Further more, the setting is only allowed to maintain one currency for bank charges but my problem is the bank charges could be in different currencies.
    Dear other experts,
    If you have better solutions appreciate you could share with me.
    Thank you.

  • Where we maintain the CST & VAT numbers for a plant which is not a register

    Hi All,
    Where we maintain the CST & VAT numbers for a plant which is not a registered for Excise?
    we are printing it on the invoice output. on debugging it is known that it comes from the table AUSP, after checking the table CABN.
    Any body knows about these two tables? let me know the purpose of these tables
    thanks in advance,
    Venkat

    Mr Big Screams.....
                      I hope you have neigther read my reply completely nor understood correctly.
    Let me tell you, maintaining record in J1ID in Plant address details doesnt declared that plant is registered under Excise act until unless you maintain ECC details. ( ECC -Excise Control Code number which will be alloted by the Central Excise dept).
    You will find CST / VAT fields in J1ID which is actually given to maintain Plant address details for INDIA localization.
    Hope its clear.
    Regards,
    Reazuddin MD

  • Where to maintain storage type in SAP

    Hello guys do you have any idea of where exacly the storage type in MM01 or 02 is maintained. I need complete detail in which view and where to maintain storage type in that view also the database table to check the Storage type for any material

    Hi,
    It depends with your material type set- up and if you have selected tabs warehouse management 1,2  to default during material creation and then during creation  you can maintain it in your warehouse managment tabs.
    Thanks
    Silas

  • SAP PP: In BOM how to where to maintain the details like Length, Width and Quantity

    Dear All,
    In SAP PP where to maintain the details like Length, Width, Quantity of the material for production information.
    Eg:
    Client will procure a material of 10milli meter Thickness Mild Steel material of fixed dimensions lets say 4meters x 4Meters
    {so the material dimensions are 4000Milli Meter (Length) x 4000Milli Meter (Height) x 10milli meter (Breadth) Mild steel Sheet}
    For production the above plate is to cut into desired sizes as per the drawings given by Design Department of "N" no qtys.
    (let say in drg for the component the desired sizes are 1000Milli Meter (Length) x 1000Milli Meter (Height) x 10milli meter (Breadth) of 4Nos}
    In BOM where all we can maintain the above details. The same details wants to send it to production for their quick reference.
    Also how the system will calculate the weight automatically for procuring of raw material with the above details.
    Note: Purchase department will procure the full length as i mentioned above but not the desired lengths to be produce for production.
    Pls let me know if any further information required for the solution to suggest.
    rgds,
    VKUMAR A

    Hi,
    You can use two options...
    1. Classification...create characteristics like length, height and breadth with CT04, assign these chars to class (CL01) and assign this class to your raw material in classification view in material master (MM02). When you receive the material from vendor during GR enter the values for characteristics. (activate Batch management).
    Now when you create the Production Order, in the components for this raw material, assign the batch..
    When this is issued against the Production order , production people can see the details of values in the batch...
    2. Try to explore the option of variable size item concept during creation of BOM..
    Thanks
    Kumar

  • Where to maintain send express settings?

    Hi,
    Please let me know where to maintain send express settings?
    I know that if the field Sndex has the value 'X' then the express documnet will be sent to the logged in user.
    Thanks,
    Ravindra

    Hello,
    As far as I know, you don't have to specifically maintain the send express settings anywhere else. As you must be aware in the 'Sendmail' step that you use in the workflow template, there would be a checkbox above the Subject o fthe mail whether to send the mail as Express or not.
    If the checkbox is checked, the value 'X' is passed automatically to the variable "EXPRESS" variable of the task container. So you dont have to pass the value manually, it wd be taken care by the checkbox itself.
    Hope this will help.
    Thanks,
    Samson

  • Where to maintain departure zone

    Hi Can anyone tell me where to maintain departure zone? As I need to maintain it in assignment:departure country/zone to shipping point.

    Hi Allen,
          We define transportation zone in T.code OVR1,after defining the transportation zone we have to assign it to country and shipping point for that use T.code OVL7.
          Once you assign here it will automatically comes in to your shipping point OVXD,here it will show in gray mode it will not allow to assign here.

  • Where to maintain Attribute of the results record (Valid, Invalid,....)

    Dear Guru
    Where to maintain Attribute of the results record (Valid, Invalid,....)
    <  The true value is less or equal to; valid  result
    >  The true value is greater or equal to; valid  result
    my requrement is when i record the result system shows <=  value is less or equal to in specification (e.g. <= 5.0%), but client requirement is only "< value is less" (e.g. < 5.0%)to be display.
    Please help.
    Thanks in advance
    Yuvraj Dhotre....

    Hi then based on the no of decimal places you can define the limit like for decimal places 3 your upper limit will be 4.999
    And if it is lower limit the it is 5.001
    regards,
    Smruti

  • Where to maintain Rule Modeler Profile in SPRO?

    Hi All,
    I am creating Request for Change transactions in CRM, and everytime I create a document it shows an error asking to 'Maintain Rule Modeler Profile in Customizing' - I have been trying to find where to maintain this setting but unable to find it.
    Could anyone of you help me out on this, Thnx.
    Regards.

    Jacob,
    If you want more information on the rule modeler, you can also check:
    [http://sapcrmweblog.blogspot.com/2011/02/enhanced-ic-webclient-alerts.html|http://sapcrmweblog.blogspot.com/2011/02/enhanced-ic-webclient-alerts.html]
    [http://sapcrmweblog.blogspot.com/2010/09/intent-driven-interactions.html|http://sapcrmweblog.blogspot.com/2010/09/intent-driven-interactions.html]
    [http://sapcrmweblog.blogspot.com/2010/10/routing-of-escalated-service-tickets.html|http://sapcrmweblog.blogspot.com/2010/10/routing-of-escalated-service-tickets.html]
    [http://sapcrmweblog.blogspot.com/2010/09/escalate-button-in-interaction-record.html|http://sapcrmweblog.blogspot.com/2010/09/escalate-button-in-interaction-record.html]
    Regards,
    Pieter

  • Where to maintain TAN number in customer master for India

    Where to maintain TAN(Tax Deduction and Collection Account Number number) in customer master for India ?

    Hello Rohit,
    Where to maintain TAN(Tax Deduction and Collection Account Number number) in customer master for India ?
    Go to the T-code XD01 or XD02 and you can enter the TAN details in the CIN Details Tab of the Customer Master record.
    Or use the transaction J1ID-->Customer Excise details.
    Regards,
    Sarthak

  • Where to maintain dollar rates in MM?

    where to maintain dollar rates in MM?Plz guide.as new to SAP -MM.
    Thanks in advance

    Hi Vibhuti
    I think you want to maintaned the exchange rate for USD as i think you might be used M exchange rate
    use Tcode OB08 to maintained the exchange rate
    Thanks

  • Where we maintain data for this Table T015W in SPRO

    Hi Gurus,
    I wanted to know that where we maintain data for this table T015W.
    This Table relates to banking.

    Hello,
           You could maintain the instruction keys in SPRO under the path
    Financial Supply Chain Management > Treasury and Risk Management > Basic Functions > SAP Business Partner for Financial Services > Settings for Financial Services > General Settings > Basic Settings > Define Instruction Keys
    Kind regards,
    Vinodh

  • Where we maintain heirarchy in PM module.

    Hi,
    need to know where we maintain heirarchy in PM module. not necessary for description.
    Regards,
    Ram Rathode

    Hi,
    Refer below threads
    [Employee hirerchy in sap;
    [ooq4: Get the hierarchy path:;
    Thanks

Maybe you are looking for