Where to maintain new environmental investment entries

Hi Sap Gurus,
Can somebody please tell me as to where can we maintaiun new entries for environmental investment entries(PRPS-IUMKZ). I was not able to find the path or tcode to do the same.
Regards,
Dwarik

HI Dwarik Nath
Please find the menu path
SPRO-->Investment Management-->Appropriation Requests-->Allowed Values for Certain Master Data Fields-->Define Environmental Protection Indicator
T code:S_ALR_87006385
Regards
Vijay

Similar Messages

New Screen Flow entry for Approval Workflow

Hi,
Can anyone please help me with this? I have a requirement where I need to provide a link on a JSPDynpage to the default approval workflow screen for any KM folder. We already have links to standard permissions and subscription screens which can be called via a url which looks something like this:
http://<host>:<port>/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.km.cm.command?Uri=/documents/Public%20Documents/Test%20Folder&isp=permissions
For this we had created a new entry under Screen Flow (System Configuration->KM->CM Configuration->User Interfaces->Mapping->Screen Flow) and provided the java class for the Permissions screenflow. When I try the same for approval workflow however it does not work. In short, when I create a new Screen Flow Entry e.g. "approval" and specify the Java class for approval screenflow (com.sapportals.wcm.rendering.screenflow.cm.ApprovalScreenflow) and then use the URL
http://<host>:<port>/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.km.cm.command?Uri=/documents/Public%20Documents/Test%20Folder&isp=approval
it does not work. Does anybody know why approval workflow works differently and how I can remedy the situation? Any help would be appreciated.
Thanks,
Shibendra

Hi,
The Custom Dialog Task No. you have to assign.
1) Go to std. Workflow note all the Std. Task Maintain in SWFVISU, Note all the Parameters
2) Similarly for the Respective Custom Task, Assign the Same for your Custom Workflow.
Regards,
Surjith

FI:where to maintain the data of "Group account number"?

Hi.When I use the T-CODE FS00 to create G/L account,the sap require me to Make an entry in field "Group account number".But when I press F4 on the field "Group account number",the sap tell me there is no values.So I need to maintain the data of "Group account number".But I don't know where to maintain the data of "Group account number".So I need someone give me the T-CODE or some advice.Thanks so much.

Hi,
You have activated group account number. If you have any grp account number of your company please provide the group company account number.
Else if you dont want to give group account number
In T-code: OB13 remove group chart of accounts from your chart of accounts
Best Regards
Ashish Jain
Message was edited by:
Ashish Bohara

Where to maintain dollar rates in MM?

where to maintain dollar rates in MM?Plz guide.as new to SAP -MM.
Thanks in advance

Hi Vibhuti
I think you want to maintaned the exchange rate for USD as i think you might be used M exchange rate
use Tcode OB08 to maintained the exchange rate
Thanks

Hi, where is the new event window in ical??

Hi, what I'm trying to do is to repeat an event every week for the rest of the year in ical, so I read one post which had a picture of the new event window pop up. Where is that new event window??? It doesn't pop up for me.
Here's what I do:
1. I click on File, then New Event.
2. A highlighted portion where I can write in text shows up, but then I don't know where the option to make the reminder a repeated reminder comes up.
I have Mac OS X Version 10.5.8, I believe.
Or...how do I jiust repeat an event without going to this?? I'd just like to repeant an event.
Any help??
Thanks in advance,
Bonnie

All right, never mind, I found it myself!!! You gotta double-click (press twice on mouse area) on the highlighted portion of the text that shows up on a date.
Thanks for reading this!!!
Bonnie

Where we maintain the cost of characteristics values in variant conf.

Hello guys,
This thread i have posted many times in sdn , but never got the satisfactory answer.This time again i am trying my luck.
    Actually i am unable to understand how costing takes place in variant configuration.
    Suppose i have created one sales order for configurable material and there we select all the characteristics values which we want.
But we don't maintain the prices of these characteristics values anywhere.So when i create the sales order than how the sales people calculate the cost of that order.
    Take a example of computer.For making computer,i want cabinet, processor, Harddisk, Ram, which are available in many sizes.So What we do that we create one configurable material and inside it we maintain all this characteristics and its values.And then i create one sales order for that configurable material and select the suitable characteristics and its values as reqd my customer.
     Now my question is how they cost that sales order?As we don't maintain the Accounting and costing view in material master of configurable material.
   So where to maintain the prices of these characteristics values?
        Plz guide.

Hi
You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
variant conditions to define surcharges and discounts for a variant
Variant u2013Pricing steps
Create condition record
create a procedure where you enter the reference from the characteristic
Assign the procedures to either the characteristic values
configure the material in the sales order
The net price for the material is displayed
If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
In addition, the Conditions pushbutton is displayed.
On pressing this pushbutton,
One can see which conditions have
influenced the price.
I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
Thanks

F110 bank charges where to maintain??

Dear Expert,
I am configuring the automatic payment and client required that the bank charges bear by which party will depend on the transaction. I know that I could maintain the instruction key on vendor master data to inform SAP whether bank charges is deduct from beneficiary account or payer account.
However, for example, for overseas transfer the client need to pay USD10 for bank charges, I mainatained the instruction key 13 on the vendor master data that it pay by beneficiary account. But where to maintain in SAP the USD 10 so when I run F110 the USD 10 bank charge will deduct from the total amount pay and post it to bank charges account?
Thanks
Max

Hi Zubin,
As far as I know the setting you suggested is only for pritning on the form and no bank charges poting will be carried on. Further more, the setting is only allowed to maintain one currency for bank charges but my problem is the bank charges could be in different currencies.
Dear other experts,
If you have better solutions appreciate you could share with me.
Thank you.

Where we maintain the CST & VAT numbers for a plant which is not a register

Hi All,
Where we maintain the CST & VAT numbers for a plant which is not a registered for Excise?
we are printing it on the invoice output. on debugging it is known that it comes from the table AUSP, after checking the table CABN.
Any body knows about these two tables? let me know the purpose of these tables
thanks in advance,
Venkat

Mr Big Screams.....
I hope you have neigther read my reply completely nor understood correctly.
Let me tell you, maintaining record in J1ID in Plant address details doesnt declared that plant is registered under Excise act until unless you maintain ECC details. ( ECC -Excise Control Code number which will be alloted by the Central Excise dept).
You will find CST / VAT fields in J1ID which is actually given to maintain Plant address details for INDIA localization.
Hope its clear.
Regards,
Reazuddin MD

Where to maintain storage type in SAP

Hello guys do you have any idea of where exacly the storage type in MM01 or 02 is maintained. I need complete detail in which view and where to maintain storage type in that view also the database table to check the Storage type for any material

Hi,
It depends with your material type set- up and if you have selected tabs warehouse management 1,2 to default during material creation and then during creation you can maintain it in your warehouse managment tabs.
Thanks
Silas

How to maintain PO Header Text entry in table T166K for different PO Type

Hi,
Can anyone tell me if there is a config transaction ( or path ) to maintain PO Header Text entry in table T166K for different PO Types
Thanks
Shrikant

Spro->Material Management->Purchasing->Purchase Order->Texts for Purchase Orders.
There are 4 config setting to do for this.
Read information text.
regards,nishant
please reward if this helps

How to maintain PO Header Text entry in table T166K for different PO Types

Hi,
Can anyone tell me if there is a config transaction ( or path ) to maintain PO Header Text entry in table T166K for different PO Types
Thanks
Shrikant

Resolved.

Reason for Environmental investment in wbs element

Hello Gurus,
Anybody knows what is the functionality of the field "Reason for environmental investment" in the wbs element?
We know that this field can be used for report in assets, but what about wbs element? this field can be transferred automatically from wbs element to its asset master data?
thank you very much in advance.

Hi,
In standard SAP report like S_ALR_87011963 OR ANY REPORTS , select the sort variant as 0008 - Co. code / reason for investment. In the report the field can be selected and included in the layout.
Muralidhar

SAP PP: In BOM how to where to maintain the details like Length, Width and Quantity

Dear All,
In SAP PP where to maintain the details like Length, Width, Quantity of the material for production information.
Eg:
Client will procure a material of 10milli meter Thickness Mild Steel material of fixed dimensions lets say 4meters x 4Meters
{so the material dimensions are 4000Milli Meter (Length) x 4000Milli Meter (Height) x 10milli meter (Breadth) Mild steel Sheet}
For production the above plate is to cut into desired sizes as per the drawings given by Design Department of "N" no qtys.
(let say in drg for the component the desired sizes are 1000Milli Meter (Length) x 1000Milli Meter (Height) x 10milli meter (Breadth) of 4Nos}
In BOM where all we can maintain the above details. The same details wants to send it to production for their quick reference.
Also how the system will calculate the weight automatically for procuring of raw material with the above details.
Note: Purchase department will procure the full length as i mentioned above but not the desired lengths to be produce for production.
Pls let me know if any further information required for the solution to suggest.
rgds,
VKUMAR A

Hi,
You can use two options...
1. Classification...create characteristics like length, height and breadth with CT04, assign these chars to class (CL01) and assign this class to your raw material in classification view in material master (MM02). When you receive the material from vendor during GR enter the values for characteristics. (activate Batch management).
Now when you create the Production Order, in the components for this raw material, assign the batch..
When this is issued against the Production order , production people can see the details of values in the batch...
2. Try to explore the option of variable size item concept during creation of BOM..
Thanks
Kumar

Where to maintain send express settings?

Hi,
Please let me know where to maintain send express settings?
I know that if the field Sndex has the value 'X' then the express documnet will be sent to the logged in user.
Thanks,
Ravindra

Hello,
As far as I know, you don't have to specifically maintain the send express settings anywhere else. As you must be aware in the 'Sendmail' step that you use in the workflow template, there would be a checkbox above the Subject o fthe mail whether to send the mail as Express or not.
If the checkbox is checked, the value 'X' is passed automatically to the variable "EXPRESS" variable of the task container. So you dont have to pass the value manually, it wd be taken care by the checkbox itself.
Hope this will help.
Thanks,
Samson

Where to maintain departure zone

Hi Can anyone tell me where to maintain departure zone? As I need to maintain it in assignment:departure country/zone to shipping point.

Hi Allen,
We define transportation zone in T.code OVR1,after defining the transportation zone we have to assign it to country and shipping point for that use T.code OVL7.
Once you assign here it will automatically comes in to your shipping point OVXD,here it will show in gray mode it will not allow to assign here.

Where to maintain new environmental investment entries

Similar Messages

Maybe you are looking for