Where to obtain original manual

I recently purchased a used Canon 320EX Speedlite. I would like to have an original printed manual in English. I do have the .pdf copy but I would like the original to carry with my other manuals. If anyone can point me in the right direction I would appreciate it greatly.
Thanks
jhjl1
Solved!
Go to Solution.

Congrats. If you have the time and interest this is a very good site but sounds like you will be working with off camera flash. Still a great site. Start in the blue column on the right - "natural' looking flash under flash photograhy techniques. He is my on camera flash guru. He has off camera flash stuff too and a book but there is lots of info on that out there.
http://neilvn.com/tangents/
Website

Similar Messages

Where to obtain original disks for old iMac?

I bought a Late 2006 20" iMac, that has some issues. The seller just sent me the unit, nothing else (no cords, disks, etc.). So I thought I could run AHT. I wiped the hard drive, installed Lion, but holding down D on boot doesn't do anything (just boots normally). I guess remote AHT over the Internet is not supported on the old hardware.
I have been perusing forums (fora?) looking for info on how to get AHT to run, or how to obtain. I copied the ".diagnostics" folder from the Apps DVD from my 2009 MacBook Pro (Snow Leopard btw) to the hard drive, but holding down D now boots recovery and only allows me to run Disk Utilities or reinstall the OS.
I called up AppleCare and they said I could buy a copy of Snow Leopard, so I got that, but holding down D while the disk is in the superdrive doesn't do anything special, just boots into the Snow Leopard install, I don't have any pulldown or other option to run AHT.
Does anyone have the original disks for this machine, who would be willing to record a DMG or ISO image and transfer it to me? Or, how else would I obtain it? Obviously what AppleCare sent me didn't work, and the ".diagnostics" folder wasn't on that disk (as was noted in many threads on similar topics).

FWIW, replacement discs have always been available, as long as the machine's serial number doesn't pop up as a stolen machine. AFAIK, there's no $16/disc burn fee, but just a nominal S&H charge, usually under $20 USD for the common two-disc package that shipped with Macs.

Where is the user manual for Adobe Digital Editions?

Where is the user manual for Adobe Digital Editions?

Thanks to you both for your replies.
I should have explained that I have already seen 'Getting Started with Adobe Digital Editions', an epub document that comes with the software. It is only nine pages long, more of a quick guide than a manual. I had expected that there would be more to the software than is covered there. Perhaps there isn't. (To explain a little further: I was looking for a way to cause epub pages to print or display like the pages of the original book, but couldn't find anything about printing beyond. That feature is present in the Bluefire Reader for iOS devices. I tried printing a particular page using Ctrl+P and specifying the page number. The page printed, but it was spread over two sheets of A4 paper and the page number was not printed.)

Where can I find manual Crystal 11.0 viewer activex control for download?

Hello,
Where can I find manual Crystal 11.0 viewer activex control for download?
I'm having a heck of a time installing the control on a client machine.
Thanks,
-Drew
Moved to Crystal Forums Edited by: Marilyn Pratt on Apr 20, 2010 1:58 AM

The ActiveXViewer is not downloadable from our SAP site. The file is hosted on your web server, and also installed on the system where you have Crystal Reports XI installed.
Look here, C:Program FilesBusiness ObjectsCommon3.0crystalreportviewers11ActiveXControls for ActiveXViewer.cab. Extract the contents and right click crviewer.inf, then select Install.
Also see knowledge base article 1218519 here, http://www.sdn.sap.com/irj/sdn/crystal-xcelsius-notes.

HT201441 i bought my iphone from faisalabad pakistan i dont know where is the original buyers of it now due to sm reason i had to make its software new and now its wanting id and password and i dnt knw that m v worried about it i paid 30000 rs to buy it :

i bought my iphone from faisalabad pakistan i dont know where is the original buyers of it now due to sm reason i had to make its software new and now its wanting id and password and i dnt knw that m v worried about it i paid 30000 rs to buy it ???

The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it.

HT5295 How do I automatically sync a "private" podcast where I have to manually input the username and password? It syncs in my iTunes but gives me an error on my iPod.

How do I automatically sync a "private" podcast where I have to manually input the username and password? It syncs in my iTunes but gives me an error on my iPod?

Is this an iLife installation disk or system install disk? In either case download the demo version of Pacifist and open the install package on the disk. Locate iPhoto and use Pacifist to install iPhoto. Then you'll need to apply the latest updater from the Apple Downloads webpage:
Apple - Support - Downloads. Just search for the iPhoto version you installed to get the updaters for that version.
OT

Delete PO - Where is located the Manual PO Number (isn't in NNM1)

Hello,
In order to reset my system, i've delete the following tables in SQL :
OPOR : PO Header
POR1 : PO Line ITems / Detail
In addition, i've changed the table NNM1 (Document Number)
Nevertheless, i don't manage to reset the documents created with a manual doc number. It isn't located in NNM1.
Do you know where SBO stores the manual doc number ?
Thank you
Stephane

Stephane,
As I told you if have deleted records from Purchase Order tables manually, you will land up corrupting your database. All transactions have a history table where entries are stored.
Also the entry is not just in OPOR and POR1, there are other tables like POR2, POR3, POR4, etc
This will not work well. Restoring the database to a state before PO import and doing it a fresh would be the ideal way.
If you have not deleted any entries manually, then make sure you have handwritten = tYES in the header template
Suda

I made a project on my PC computer, saving it as a tif. I then took it to the Art Institute, editing it on their Apple I wish to tweak it at home but now Ps claims that it is not compatible with this cc version of Ps, where it was originally created! HEL

I made a project on my PC computer, saving it as a tif. I then took it to the Art Institute, editing it on their Apple I wish to tweak it at home but now Ps claims that it is not compatible with this cc version of Ps, where it was originally created! HELP!!!

The files are the same, regardless of OS version.
Most likely your file was corrupted when you transferred it.

How do i keep the original manual sort of my photos that i had in previous library after a rebuild in iphoto library manager?

how do i keep the original manual sort of my photos that i had in previous library after a rebuild in iphoto library manager? and keep the events in the same order with blank events also

Not sure you can.
Library Manager creates an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.

Where i can get manual/drivers/bios for MS-6332 (i815, FlexATX)??

Where i can get manual/drivers/bios for MS-6332 (i815, FlexATX) ??
Can't find anything about this M/B on the site.

sounds like an oem pc to me ,hp dell some thing like that
get it from them

Original Photo Size Lost....Why? Where has my original library gone?

I have had some problem with my iphoto library. Whilst I have deleted anything, or atleast, nothing appears to be in TRASH, my mac now only shows iphoto libraries that have been created recently.
These recent libraries though, do include thousands of my original photos, however, they all appear to be a fraction of their original size. Photos are appearing to be around 25KB in size when they were original 1-2MB. This has happened to all photos except the photos i uploaded today. The problem with the pics I uploaded today, is that iphoto is only enabling me to view these when the slider is at the far left - i.e. small thumbnails only. When I pull the slider to the right, hit slideshow, or double click to enlarge on of these new photos, I am simply presented with a large, but blurey, explanation ("!") point.
I am praying my originally sized photos are not lost? Where is my original library? I am lost and stressed - and desperately hoping someone can assist me.
Yours in need

Welcome to the Apple Discussions. First the size of the photos you mentioned, 25KB, appear to be the thumbnails that iPhoto creates when importing into iPhoto. The "!" occurs when iPhoto loses the link to the original file. If you don't see any of the older image files that are greater than 25KB they probably have been deleted. However you can try the following just in case: run the three fixes below in order as needed:
1 - launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all options.
2 - rebuild the library using iPhoto Library Manager as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: It may take some time to create the new library if you have a lot of photos.
3 - start over with a new library and import the Originals folder from your original library as follows:
Creating a new library while preserving the Events from the original library.
1. Move the existing library folder to the desktop.
2. Open the library package like this.
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
If the above doesn't find and restore those missing older image files and you don't have a backup of your library your only recourse is to use a file recover application like SubrosaSoft FileSalvage. It will let you run it in demo mode to determine if it can recover the files you need before you have to purchase.
In the future you might want to invest in an external HD for backups.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Where do I find manuals for photoshop touch for ipad (not video tutorial)?

Where do I find manuals for photoshop touch for ipad (not video tutorials)?

The best way to get quickly acquainted with PS Touch is to do the built-in tutorials. There was a "quick start guide" of sorts, but as far as I know, they haven't updated it to reflect the latest version as of yet.

HT3775 For some reason my QuickTime player has stopped playing all my .avi movies, I can't seem to upgrade and it doesn't offer any solutions except that it may need additional software but not what or where to obtain it from? Help most of my movie are in

For some reason my QuickTime player has stopped playing all my .avi movies, I can't seem to upgrade and it doesn't offer any solutions except that it may need additional software but not what or where to obtain it from? Help most of my movie are in .avi!!

Google 'Perian' and 'Flip4Mac' — these are the extensions that will make QT play other file formats.
However, a simpler solution is just to abandon QT in favour of the free, open-source player VLC, which plays just about everything natively without further downloads.
Download the free VLC Player from here:
http://www.videolan.org
Plays just about everything, including avi & mpg, without add ons.

How do i customize Location bar so it also brings up bookmark results where the title was manually changed by me?

I added some bookmarks where I added more descriptive words to the title. Later when I type those descriptive words in the location bar the bookmarks don't show up. I even tried using the on-demand filtering command in location bar - meaning when you type "#" followed by words that you want firefox to match in the bookmark title, it will show up all the bookmark entries that have words matching in the bookmark title. That didn't work either! How do i customize Location bar so it also brings up bookmark results where the title was manually changed by me?

Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.
If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
See also:
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars

Iphone photo transfer choas: where is the original image ?

folder structure is confusing:
iphoto library
modified
2007
Roll 312
if modified, where is the ******* original ?

Are you transferring photos from iPhoto to your iPhone?
The folder structure on the iPhone should be as follows:
Camera Roll - stores photos taken by the iPhone only.
Photo Library - access to all photos transferred to your iPhone from your computer via the iTunes sync/transfer process. Photos take by the iPhone are available in the Camera Roll folder only.
Below Photo Library are select iPhoto albums (or select folders containing photos) transferred from your computer to your iPhone.
If you transferred one iPhoto album or separate folder named 2007 containing photos to your iPhone which includes 100 photos - it should be available on the iPhone as follows:
Photo Library (100)
2007 (100)
If you transferred 3 iPhoto albums or separate folders named 2005, 2006 and 2007 containing a total photo count of 100, it should be as follows:
Photo Library (100)
2005 (35)
2006 (35)
2007 (30)
You can view the 30 photos in the 2007 album or folder only by selecting it or view all 100 photos in all albums or folders by selecting Photo Library.
I'm not sure where the modified folder is coming from but unless you have an iPhoto album or pictures folder name modified which was selected for transfer from your computer to the iPhone, something is wrong but the original photos should be available on your computer.

Where to obtain original manual

Similar Messages

Maybe you are looking for