Where to post possible bugs?

There's a BIOS update for my system which causes loss of onboard sound if you are not using a sound card. I was wondering if perhaps there was a way to submit a bug report?

Caeruleus wrote:
There's a BIOS update for my system which causes loss of onboard sound if you are not using a sound card. I was wondering if perhaps there was a way to submit a bug report?
Post specifically to the audio section of the type of system you own. Specify by the complete product name/number.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

How and where to post a bug report

Hello,
I find some bug on staroffice 8 and I'd like to report it. Also I want to post some suggestion for translation of italian version. Where I must post all these stuff?
Regards,
Marco Mangiante

iPod Feedback.

Possible Bug In Apex 4.0.2

Hi Everyone.
I would like to report what I think is a bug in Apex 4.0.2.
If you go to my workspace on apex.oracle.com:
Workspace = EEG
Username = [email protected]
Password = galaxy (all lowercase)
Run the application: 37796 - Elie_Various_Goodies [no credentials are required]
This app was imported from my 4.0.1 workspace at my job. On the page I created two Date Picker items, P1_BEGIN_DATE and P1_END_DATE. I set them up so that whenever a user selects a begin date, a dynamic action "MANAGE_DATES" fires and automatically sets P1_END_DATE to this selected begin date value. Now when a user goes to select an end date, the displayed calendar starts at the previously selected begin date rather than the default of "Today".
All of this worked fine on my office (4.0.1) workspace. However, after exporting this app and then importing onto apex.oracle.com, none of this functionality would work. Even worse, whenever I try to select a begin date or even an end date, the selected dates never make it into the date picker fields. Displaying the "Session" window shows these fields as empty.
It was only after I copied the two date picker fields and also re-created my dynamic action (P1_BEGIN_DATE2, P1_END_DATE2, MANAGE_DATES) did my functionality return.
This behavior is quite strange. I can only think this is some sort of bug attributed to the export/import process when exporting a 4.0.1 app into a 4.0.2 workspace. I am not sure if this bizarre behavior happens with non-date picker items. Nor am I sure if this beavior would be repeated if I export/import from 4.0.2 into the another 4.0.2 environment.
Another strange thing I noticed. If I change my date picker items to be "date picker (classic)" type items, the dynamic action does not work at all. This is true in both 4.0.2 and 4.0.1. I'm not sure if this a bug or not. It could be that the classic date picker is just not "javascript" enabled so to speak. If that is true, then it would have been nice if the docs would have warned us about this.
Has anyone else seen this behavior?
Thank you.
Elie

Hi Joel.
First let me thank you for the warning about allowing "everyone" access to my workspace.
You're correct, of course. Anyone could destroy anything within my workspace. I guess I was too trusting especially as I have seen many posts on the Forum where others have given access to their workspace so that responders can offer help. I really should be more discreet about this. Again, thank you. Needless to say, I have changed my password.
With respect to the possible bug, the MANAGE_DATES dynamic action is intended to be a submit page because that is the only way I can see to get BOTH the P1_END_DATE date picker item as well as the end date textual field to be assigned the selected P1_BEGIN_DATE. I tried to use a dynamic action in which javascript sets the value of the end date textual field to the selected P1_BEGIN_DATE value. This works without the need to submit the page. Unfortunately, this does not cause the P1_END_DATE date picker item to default to this value. Instead, the default remains at today's date. This is why I finally resorted to a dynamic action that submits the page whenever a new value is selected (that is, a "change" event) from the P1_BEGIN_DATE date picker item.
All of this works in my office 4.0.1 environment. However, I was puzzled when this fails under 4.0.2 on the hosted web site at apex.oracle.com. This is why I posted a "possible" bug in 4.0.2.
I hope this all makes sense.
One more thing, as already mentioned in my original post, this "defaulting a date picker" functionality does NOT work at all for the "classic" date picker items in both 4.0.1 nor in 4.0.2. I realize one can implement this functionality (I' guessing) my using, say, a "onChange" javascript call to submit the page. It's just funny that the "classic" date picker items are not acted upon by the dynamic action MANAGE_DATES that submits the page.
Thank you.
Elie

Possible bug with iTunes 11 ?? (with Smart Playlists)

Hi folks
New to Apple Support, but after upgrading to iTunes 11 earlier today (on my Mac Mini) I've discovered a potential bug / difference in the way it operates compared to earlier versions. Can someone else try something similar and see if they get the same result - I think I read somewhere that v11 is not available on Windows yet, so I cant compare what happens there
I've imported all our CD's into iTunes, and we've set up several Smart Playlists (SP). Using the Rating setting for the songs, we can break them up into groups, eg
Rating 0 = not yet processed
Rating 1 = not interested in listening to again
Rating 2 = kids songs (for our children)
Rating 3 = christmas songs
Rating 4 = songs i like, but my wife probably wouldnt
Rating 5 = songs we both like - good for background music etc
Using Home Sharing to our iPad's rocks !!
Now, onto the bug.
Using the SP that has just songs with Rating 0, I could play any song, set the Rating to whatever, and naturally once set, that disappears from the SP
In all earlier versions of iTunes, playback would continue with the next song, so I could set that Rating, etc etc. Worked really well to churn through a chunk of songs in say 15 minute blocks
With iTunes v11, playback stops as soon as I set the Rating.
How can you help ?????????? Set up a smart playlist with whatever criteria you like - make sure you have a number of songs returned and ensure Live Updating is set, have a song playing, and make that song no longer valid for that SP. Anyone doing this in earlier versions of iTunes should have the next song begin, and if this is a bug, then those using iTunes 11 will have playback stop
Sorry for the long post, but in order to determine a potential bug, you need to describe the situation and how to test it.
Thanks for reading
PS I'm on a 2010 Mac Mini with OSX v10.7.x (whatever the current release of that is) and just upgraded to iTunes 11

Soo, maybe it isnt possible bug, but the way Apple have changed iTunes when going to v11. Stooopid
Anyway, found this link about downgrading to an earlier version. I've just completed it and found one or two "errors" in the method, which I'll detail below
http://www.emacconsulting.com/apple/itunes/downgrade-itunes-11-to-itunes-10-7/
In the latter part of the instructions
11) Open your iTunes Music Folder.
If you never moved your iTunes folder it’s located here:
Your HD/Your User/Music/iTunes
Or go to the Finder type: Command + Shift + G
Paste this into the the dialog: ~/Music/iTunes
If you moved it to another hard drive, you will know where to locate your iTunes folder.
12) Open the “Previous iTunes Libraries” folder.
13) Find the most recent copy of the “iTunes Library 2012-xx-xx.itl” file.
Normally it will the last file at the bottom of the list.
14) Drag a copy of the file into the iTunes folder.
15) Delete the “iTunes Library” file.
16) Change the name of the “iTunes Library 2012-xx-xx.itl” to ”iTunes Library” with no .itl extension.
In #11, I simply went to "My HD"/Users/"My User"/Music/iTunes
Copied the latest .itl and moved it up a directory level
The old file in #15 is called "iTunes Library.itl" - which I renamed, and renamed the copied version back to "iTunes Library.itl" = though I do have extensions showing, some people may not and hence wont see the .itl
Anyway all is fixed in my world, and when I launched v10.7, it asked me if I wanted to upgrade to v11 - I said No and not to prompt me again. Playcount issue is resulved, as is changing SmartList criteria with playback continuing
Apple - please correct these bugs before releasing any new versions of iTunes... you've made a very large number of people unhappy

No posting possible in fiscal year 2015

Hi
I am getting below pasted error while performing AFAB (Depreciation Run). This is the first time we are running the depreciation in the production system. We did not encounter this error in quality or development. This is a gap implementation project, where in FI-AA was not implemented earlier. But all the GL accounts related to Asset GL, Accumulated Dep GL and Depreciation GL were created and has been in use till date since 2005!!. And client has been acquiring assets manually, posted depreciation manually. So I have reused the same GL accounts during our implementation as per client's requirement.
I have closed all the previous period and opened the new fiscal year up to 2015 (From 1st August 2014 new fiscal year starts i.e 2015).
Kindly help.
No posting possible in fiscal year 2015
Message no. AA688
Diagnosis
No posting is possible in the fiscal year 2015 specified. The fiscal year
specified differs by more than a year from the fiscal year in which the last
postings were performed.
Procedure
Correct your fiscal year specifications

Asked abaper to write this code
*& Report YTEST_FIXED_ASSETS*&
REPORT ZTEST_FIXED_ASSETS.
Tables T093D.
Update T093D
Set AFBLPE = '000'         " <=== correct period
          AFBLGJ = '0000'        " <=== correct fiscal year
          AFBANZ = '00'
          STATUS =    ' '
Where BUKRS = '1000' and   " <=== company code
          AFABER = '01'   and   " <=== depreciation area
          AFBLPE = '012' and   " <=== wrong period
          AFBLGJ = '2008'.      " <=== wrong fiscal year

Possible Bug with Drag-and-Drop Being Published via HTML5 - Getting "Undefined" Error When Dragging Object

Hello,
I came up with a way to use drag-and-drop interactions that will take advantage of file input so that I may create a drag-and-drop interaction that uses one draggable object over and over allowing multiple scoring/tracking possibilities. Example use...is having the draggable object be dynamic in that it randomly changes its text so that a learner can drag a term it's possible classification.........thus allowing the possibility of having many terms easily loaded without having to redo a drag-and-drop interaction for each needed terms/classifications updates/changes.
My Issue: When using a variable to represent the text for a draggable Smart Shape object, I'm getting the error message "undefined" when, clicking/pressing on the object, as well as during the drag of the object. This issue occurs when publishing the project in an HTML5 format. Flash interestingly enough seems to work perfect...but we are not interested in publishing via Flash any longer.
To better help you explore this error message, I've set up a test project so that you can see when and how the "undefined" message shows up during a drag-and-drop interaction. I've also included the Captivate 8 project file used to make the exploration project I'm sharing in this post.
Link to Captivate project I created for you all to explore "undefined" error message": http://iti.cscc.edu/drag_and_drop_bug/
Link to this Captivate 8 Project file: http://iti.cscc.edu/drag_and_drop_bug.cptx
It's pretty interesting how things react in this demo, please try the following actions to see some interesting happenings:
Drag the Yellow (or variable drag box) to the drag target.
Drag Black Hello square to Drag target and click undo or reset - watch the undefined message come up on the Yellow (or variable drag box).
Drag the Yellow (or variable drag box) to the drag target and then use the undo or reset.
Move both draggable boxes to the drag target and use the undo and reset buttons...
Anyhow, I know you all are sharp and will run the demo through its paces.
I'd really be very honored if anyone help me figure out how I could (when publishing out to HTML5) no longer have the "undefined" error message show up when using drag-and-drop with a variable for shape text. This technique has been well received at the college I work at...and I have many future project requests for using such an idea on a variety of similar interactions. I'd love see a solution or see if this might be a bug Adobe may be able to fix!
I tried to find a solution to the issue documented here for quite some time, but I was not able to find anyone with this problem much less attempting the idea I'm sharing in the help request - save the darn "undefined" message that comes up!
Many thanks in advance for any help and/or direction that you all may be able to provide,
Paul

Hello,
I just wanted to supply a minor update related to my drag-and-drop question/issue stated above:
I did another test using Captivate 7, and found that the undefined error (publishing as HTML5) does not appear and the variable data remains visible - except the variable data turns very small and does not honor any font size related settings.
I did go ahead and submit this to Adobe as a possible bug today.
Thanks again for any help related to this issue. If the issued documented above is solved, it will allow many amazing things to be done using Captivate's drag-and-drop for both regular type projects as well as interaction development for iBooks!
Matter of fact if this issue gets fixed, I'll publish a Blog entry (or video) on way's I've used Captivate's drag-and-drop to create dynamic learning activities for Higher Ed. and for use in iBooks.
~ Paul

Nouveau driver crashes, freezes X, where to report a bug

Hi,
where should I post a crash bug for the nouveau video driver? The nouveau site says not to post the bug there but at your friendly distribution, which is here.
The crash is hard to reproduce, happens randomly, once a week, today already twice.
The systemd journal says <see below>.
I am able to login from another computer and reboot the box. So it's just X which freezes, ssh and other services obviously continue to run.
I found a very similiar bug report at an OpenSuse bug tracker.
So, where do I go with that bug?
TIA,
Ekki
Oct 23 19:12:54 grappa kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
Oct 23 19:12:54 grappa kernel: IP: [<ffffffffa0aa3d52>] nouveau_fence_wait_uevent.isra.1+0x22/0x440 [nouveau]
Oct 23 19:12:54 grappa kernel: PGD 22e61e067 PUD 22cfcb067 PMD 0
Oct 23 19:12:54 grappa kernel: Oops: 0000 [#1] PREEMPT SMP
Oct 23 19:12:54 grappa kernel: Modules linked in: fuse joydev nls_utf8 cifs snd_hda_codec_hdmi uvcvideo videobuf2_vmalloc videobuf2_memops hid_generic videobuf2_core u
Oct 23 19:12:54 grappa kernel: ehci_hcd xhci_hcd usbcore scsi_mod usb_common
Oct 23 19:12:54 grappa kernel: CPU: 2 PID: 502 Comm: X Tainted: G W 3.11.6-1-ARCH #1
Oct 23 19:12:54 grappa kernel: Hardware name: Gigabyte Technology Co., Ltd. GA-870A-UD3/GA-870A-UD3, BIOS F4 11/10/2010
Oct 23 19:12:54 grappa kernel: task: ffff880229c021c0 ti: ffff88022e676000 task.ti: ffff88022e676000
Oct 23 19:12:54 grappa kernel: RIP: 0010:[<ffffffffa0aa3d52>] [<ffffffffa0aa3d52>] nouveau_fence_wait_uevent.isra.1+0x22/0x440 [nouveau]
Oct 23 19:12:54 grappa kernel: RSP: 0018:ffff88022e677c48 EFLAGS: 00010296
Oct 23 19:12:54 grappa kernel: RAX: 0000000000000000 RBX: ffff8801d52850e8 RCX: 0000000000000001
Oct 23 19:12:54 grappa kernel: RDX: 0000000000000001 RSI: ffff8801d52850f0 RDI: ffff8801d52850e8
Oct 23 19:12:54 grappa kernel: RBP: ffff88022e677cc8 R08: 00000000000001f6 R09: 000000000000e200
Oct 23 19:12:54 grappa kernel: R10: ffffffffa0b0bf80 R11: ffff88022e677e10 R12: 0000000000000001
Oct 23 19:12:54 grappa kernel: R13: 0000000000000000 R14: ffff880232c54d20 R15: ffff8801d52850f0
Oct 23 19:12:54 grappa kernel: FS: 00007fe087b24880(0000) GS:ffff88023fc80000(0000) knlGS:00000000f3ecd740
Oct 23 19:12:54 grappa kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Oct 23 19:12:54 grappa kernel: CR2: 0000000000000008 CR3: 000000022e62a000 CR4: 00000000000007e0
Oct 23 19:12:54 grappa kernel: Stack:
Oct 23 19:12:54 grappa kernel: ffff88022e677d20 ffffffff814e2fe6 ffff88022e677e10 ffffffffa0b0bf80
Oct 23 19:12:54 grappa kernel: 000000000000e200 00000000000001f6 0000000000000000 0000000000000001
Oct 23 19:12:54 grappa kernel: 0000000000000001 ffff8801d52850f0 ffff8801d52850e8 ffff8801d52850c0
Oct 23 19:12:54 grappa kernel: Call Trace:
Oct 23 19:12:54 grappa kernel: [<ffffffff814e2fe6>] ? retint_kernel+0x26/0x30
Oct 23 19:12:54 grappa kernel: [<ffffffffa0aa41f6>] nouveau_fence_wait+0x86/0x1a0 [nouveau]
Oct 23 19:12:54 grappa kernel: [<ffffffffa0aa5de5>] nouveau_bo_fence_wait+0x15/0x20 [nouveau]
Oct 23 19:12:54 grappa kernel: [<ffffffffa08f4911>] ttm_bo_wait+0x91/0x190 [ttm]
Oct 23 19:12:54 grappa kernel: [<ffffffffa0aab0d9>] nouveau_gem_ioctl_cpu_prep+0x59/0xc0 [nouveau]
Oct 23 19:12:54 grappa kernel: [<ffffffffa08491a2>] drm_ioctl+0x532/0x660 [drm]
Oct 23 19:12:54 grappa kernel: [<ffffffff811b57e5>] ? d_free+0x55/0x60
Oct 23 19:12:54 grappa kernel: [<ffffffff8108bc74>] ? lg_global_unlock+0x44/0x90
Oct 23 19:12:54 grappa kernel: [<ffffffff811bdec0>] ? mntput_no_expire+0x100/0x150
Oct 23 19:12:54 grappa kernel: [<ffffffff811b1c05>] do_vfs_ioctl+0x2e5/0x4d0
Oct 23 19:12:54 grappa kernel: [<ffffffff811a15ee>] ? ____fput+0xe/0x10
Oct 23 19:12:54 grappa kernel: [<ffffffff81080744>] ? task_work_run+0xa4/0xe0
Oct 23 19:12:54 grappa kernel: [<ffffffff811b1e71>] SyS_ioctl+0x81/0xa0
Oct 23 19:12:54 grappa kernel: [<ffffffff814ea5dd>] system_call_fastpath+0x1a/0x1f
Oct 23 19:12:54 grappa kernel: Code: c3 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 41 57 49 89 f7 41 56 41 55 41 54 41 89 d4 53 48 89 fb 48 83 ec 58 48 8b 07 <
Oct 23 19:12:54 grappa kernel: RIP [<ffffffffa0aa3d52>] nouveau_fence_wait_uevent.isra.1+0x22/0x440 [nouveau]
Oct 23 19:12:54 grappa kernel: RSP <ffff88022e677c48>
Oct 23 19:12:55 grappa udisks-daemon[696]: **** /proc/self/mountinfo changed
Oct 23 19:12:55 grappa kernel: CR2: 0000000000000008
Oct 23 19:12:55 grappa kernel: ---[ end trace 30878790628ea59a ]---
Oct 23 19:12:55 grappa kernel: [drm:drm_release] *ERROR* Device busy: 1

davison wrote:I'm getting exactly the same - did you ever get anywhere with this?
Hello which graphics adapter do you have? (lcpci -v) What configuration are you using? For example are you attempting the vdpau extensions?

Copy and paste adjustment problem/ possible bug.

Hi all
I have just encountered a very strange problem/ possible bug.
I have been working on a file in photoshop cs5 that had come from lightroom 5.3. This was then saved (automaticaly becomes tiff file in Lightroom). I then wanted to make some more adjustments to it in lightroom (using local adjustment clarity). I then tried to copy the settings of the adjustment brush from the tiff to the original raw file. This is where it gets very strange. The adjustments are copied but they are rotated ccw by 90 degrees! I can replicate this every time.
Could someone else try to see if this problem exists on their catalogs or if its a corrpution problem my end.

Noted on the bug, thanks.
1762hd wrote:
Hi Geoff
Heres the summary for bug report - please note this bug also affects radial filter/healing brush and crop
Scenario
1 open a portrait raw image in photoshop using render using lightroom (I am using cs5)
2 back in lightroom make a change using the - adjustment brush/ radial filter/healing brush or crop - to the newly created tiff image.
3 copy and paste this adjustment to the original raw file.
problem
all effects are rotated.

Question relating to Java printing and where to post...

First of all I am not a developer, but I have a question regarding printing in an application that was developed using Java and am not sure where to post it. I'll pose the question than defer to a moderator to move it if necessary.
Here's the issue and question:
We are using an application that has a host/client structure on several systems that use Windows Vista and XP. I have been told by the support team for this application that they use Java for printing tasks. I don't know if the entire application or just the print engine were developed in Java.
Here's the problem:
Whenever I tell this app to print for the FIRST time after opening the app, it takes between 4 and 5 minutes before it brings up the print menu. Again, this ONLY happens the FIRST time I tell it to print, and subsequent print commands are processed in a more normal timeframe.
If I close this app and immediatly open it again, it goes through the same silly wait time for the FIRST print only.
Tech support had me update Java to the latest incarnation on all machines, but that changed nothing. The guy even had the GALL to blame Java for the issue, can you believe that???
Anyway, my question to you people here - that develop with Java - is what in the world this app ( and I suppose Java ) could possibly be doing with this print job for 4 to 5 minutes?
BTW... these are NEW systems, with Dual-Core processors and a minimum of 1.5 gigs ( the server has 3 gigs) of RAM. Oh, and what I am printing is simply text, no graphics, just plain simple text.
Any and all comments/suggestions appreciated...
bob

Thx ChuckBing,
I agree with you about the application being the most logical source of the problem, and I have already provided their support with all the details that you suggest.
I'll look at the link you provided and see if anything there steers me in a direction....
bob

Where it is possible to change the value separator in Custom Field?

Hello,
This is a question around the "Custom Fields" and "Lookup Table"
I linked a "Custom Field" to a "Lookup Table".
I select the option "Allow multiple values to be selected from lookup table"
When I used this "Custom Field" in a view, the selected values are separated by a comma ",".
Where it is possible to change this value?
I saw another project server where the character is a semi-column ";" and I would like to test with ";".
Thank you in advance
Pascal Jean

Hi,
This will be triggered by your regional settings.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |
Hello,
Thank you for the answer.
Do you mean the "local regional settings"?
Because, depending on the PWA site I'm connected to I don't have the same values. I'm obviously using the same workstation.
Regards

Possible bug found in Mac Os X Tiger 10.4.11 in conjuction with iPod Touch

Dears,
I think I've found a possible bug in Mac Os X version 10.4.11 in conjunction with iPod Touch.
When the iPod is connected during boot, my Bluetooth hardware fails to be detected. When I restart the portable without the iPod connected, my Bluetooth hardware is recognised & activated again. It is reproduceable.
1. Attach iPod Touch before starting the MacBook Pro
2. Boot the Macbook
3. Bluetooth hardware should be rendered inoperative
Restore functionality:
1. Detach the iPod Touch
2. Reboot the portable
3. Bluetooth hardware is restarted / recognised.
Regards
Cedric

wrong category

Possible bug: Saving array with extended and double precision to spreadsheet

If one concatenates a double precision array and an extended precision array with the "build array" vi and then saves using "Write to Spreadsheet File" vi any digits to the right of the decimal place are set to zero in the saved file. This happens regardless of the format signifier input (e.g. %.10f) to the "Write to Spreadsheet File" vi.
I am on Vista Ultimate 32 bit and labview 9.0
This is a possible bug that is easily circumvented by converting to one type before combining arrar to a spreadsheet. Nonetheless, it is a bug and it cost me some time.
Solved!
Go to Solution.
Attachments:
Spreadsheet save bug.vi ‏9 KB

Hi JL,
no, it's not a bug - it's a feature
Well, if you would look more closely you would recognize the "Save to Spreadsheet" as polymorphic VI. As this polymorphic VI doesn't support EXT numbers internally (it only supports DBL, I64 and String) LabVIEW chooses the instance with most accuracy: I64 (I64 has 64 bits precision, DBL only 53...). So your options are:
- set the instance to use as DBL (by right-click and "Select type...")
- make a copy of this VI, save it with a different name and make it support EXT numbers (don't rework the polymorphic VI as you would break compatibility with other LV installations or future revisions)
And yes, those coercion dots always signal some conversions - you should atleast check what's going on there...
Message Edited by GerdW on 05-21-2010 10:01 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Possible bug? formatted number 0 displays as 4,294,967,295

This is really two questions in one. First, I have a routine
that sometimes provides a result of 0, which is *sometimes*
displayed in an AdvancedDataGrid column as 4,294,967,295, which I'm
assuming is somehow a meaningful number (largest int?). Anyway, I
have an ADG with a column defined as:
<mx:AdvancedDataGridColumn headerText="Remaining work"
labelFunction="rem_work_fmt" textAlign="right" />
The labelFunction called is shown below:
private function rem_work_fmt(item:Object,
column:AdvancedDataGridColumn):String
var num:String =
numberFormatter.format(item.get_remaining_work());
trace ("result: " + num);
return num;
The trace output prints: "result: 0" as expected, but the
number displayed in the grid is sometimes 0 and sometimes
4,294,967,295.
More weirdness, this only happens to the last column in the
ADG. I call the same format logic on a different column and have
never seen the wrong result. Also, the same underlying function
"get_remaining_work()" is called elsewhere on the same data and the
result is correctly displayed in a text field as 0.
Second question, I've run into some other possible bugs,
which I haven't reported because I found a work around. How does
one do that in the beta program?

lw1001,
Bugs can be filed in the public bug base at
http://bugs.adobe.com/flex/
You'll need to sign up before you can submit bugs.
Also, if you can attach the bug files to the bug report, it
makes it a lot easier for Adobe to investigate.
Let me know if you have any further questions/problems.
Peter

A possible *bug* in java jcombobox

Hi all,
I think i found a possible bug in java jcombobox .. i am sure some of you must have already experienced it..
supposedly you put a jcombobox in a jpanel
returned the panel from a method to a calling method..
and that method adds it to another panel that it had created to a frame..
and if this happens dynamicaly at runtime, as only after u click a button..
meaning : without adding the combobox or the immediate parent panelto the contentpane .. directly..
Then,
your combox's keylistener may not catch events fired.
.. this has happened to me many times.. and always i could only find a way out
.. by adding the combobox to panel that is loaded during startup itself and is
.. not returned through a method call.
Your opinions please ?
'Harish.

All components in a UI are created at run-time.
When you create your JFrame you call pack() to align and resize the UI. This validates all the components, and sets the default focus on what ever component should have the focus at start up.
When you create components and add them as children of another component you have to validate the child and parent. This can be done by calling JComponent.validate()
As for keylisteners not getting called, this might be fixed if you call grabFocus on the new combobox. I can't see a reason why any listener would stop working.
For me to really understand what your talking about. I'd need to see source code reproducing this problem.

Can someone confirm a possible bug with Universal Access?

Can someone confirm a possible bug with Universal Access?
I have a Mac Pro 3,1, 10.7.1 but if you could confirm or not this possible bug with any model.
In Energy Saver preference pane:
Set Mac to never sleep.
Set Display Sleep to ~2 minutes.
In Desktop & Screen Saver:
Set screen saver to start at ~1 minutes.
In Universal Access:
Check Enable access for assistive devices.
Check radio button Zoom to On.
Zoom in window not checked.
Confirm that Zoom works by pressing:
⌥⌘= (option, command, =).
Set screen back to normal by pressing ⌥⌘-.
Let screen sleep after screen saver starts.
Wake screen and see if ⌥⌘= still works.
Thanks … Ken

Other than the time intervals (smallest Screen Saver kick-in is 3 minutes), it works fine for me - at least I can still zoom in/out after waking the display.
Tested on two different MacBook Pro models in 10.7.1

Where to post possible bugs?

Similar Messages

Maybe you are looking for