Where to put Samples for EXS24mkII?

I have collected about 40 CD's which came with Music Tech magazine which contain free samples.
I have never used EXS24mkII Sampler before and was just wondering which folder I should put these samples from the CD's into?
Thanks.

EXS patches are made up from the raw sample data and an "EXS" file
It doesn't matter where the raw samples are, as long as they're on a hard drive, EXS will find them when you load the patch...
What IS important though, is that your ".EXS" files (or an alias) are in the "sampler instruments" folder:
Users/"your folder"/library/application support/logic/sampler instruments.
What I did, was to catorgorise the raw samples into type i.e. Bass, Strings, Brass etc, put them into seperate folders, then do the same with the ".EXS" files... Put all the .EXS folders into ONE folder, and made an alias to the sampler instruments location.
That way, you get a nice catorgorised drop-down menu from the plug-in - much easiser to find what you're looking for.
Hope this helps.

Similar Messages

  • Where to put FCKEditor for Apex

    Hi,
    In HTMLDB, I put FCKEditor (http://www.fckeditor.net/) in folder ../marvel/images, but not found folder like that in Apex.
    Please help me.
    Regards,
    guntur

    You can use one of the WebDav clients like cadaver or sitecopy : http://www.webdav.org/projects/
    Or you can use just plain FTP :). Enable FTP access using dbms_xdb.setftpport('2100'); for example, see instructions here: http://daust.blogspot.com/2006/01/xe-changing-default-http-port.html
    ~Dietmar.

  • This is less a question and more of a suggestion and I am not sure where to put it..... I would like an update that would allow you to have a tone for each individual email account

    I am not sure where to put this but I would like individual tones for all my email accounts

    Wonderful suggestion.
    You can give Apple feedback here > http://www.apple.com/feedback/
    Hop that helps

  • Where to put jar files reachable for ejb:s?

    Hello!
    I have a ejb that use some jar files.
    But I can not figure out where to put the jar files that I use from my ejb in Weblogic 8.1.3.
    Until now I have extracted all jar files and put them inside my ejb with my own class files. But this seems odd.
    So please help me out here.
    Best regrads
    Fredrik

    Dear,
    You might have downloaded either tar.gz or zip file. when you extract this file you will find a jar file and also some demos nad docs(api+help). place the poifs api jar file in 'WEB-INF\lib" folder and restart the server.
    In general any api jar files for web applications should be placed in WEB-INF\lib folder then only they are accesible. If you extracted the jar, then place entire package structure in WEB-INF\classes directory
    Regards,
    Nishant Kulkarni
    Software Engineer
    Bangalore
    [email protected]

  • Urgent where i put this code for delete

    hi master
    sir this code is right for my requirment but when i put on_delete event system not respons or not delete record
    where i put this code for conditional deletion
    this is my code
    declare
         recno number;
    begin
    if :system.cursor_block='accbal' then
    delete accbal where accid=:chartofacc.accid;
         go_block('chartofacc');
         next_record;
    elsif :system.cursor_block='chartofacc' then
         select count(*) into recno from accbal where accid=:chartofacc.accid;
         if recno=0 then
         delete_record;
         go_block('chartofacc');
         previous_record;
         else
         message ('system found matching record then no delete master record');
         message ('system found matching record then no delete master record');
         end if;
    end if;
    end;
    please gide me which event i use
    thanking you
    aamir

    Hello,
    The ON-DELETE triger fires only after a COMMIT statment and only for those records that have been deleted in the block.
    Francois

  • Where are the sample files for dreamweaver cs 5.5 on Adobe TV?

    where are the sample files for Dreamweaver cs 5.5 on Adobe TV? video says there there, but there not! Video even shows where to find them, but there still not there! Were they just to big for Adobes servers to handle so the had to take them down to make space?  : )  Please help, could really use them. Thanks! : )

    CS5.5 is now 4 versions behind CS6, CC and CC2014.
    This tutorial was written for CS5 and it works with CS5.5. You'll find the supporting files for it under Sample Files on the right.
    Building your first dynamic website – Part 1: Setting up the site and database | Adobe Developer Connection
    Nancy O.

  • PPD files, where to put for ID cs5?

    hi guys.
    in ID cs4 ppd worked fine, but now, in ID cs5 i dont have an option for my pdps. Only pdf print and device independent.
    anyone have idea how to resolve this problem?
    in my work is necessary to print through two ppds: linotronic 930 and prinergy, and i do not know where now put them!
    please help.

    aw. last mac os X.
    and i tried to search, but with no luck. most cases are about cs4, and cs4 works fine for me. CS5 though no. so tis topis remains unsolved...
    i've windows 7 64 too, and situation are worst. i do not think there is any option to put PPD to work on windows 7 64...

  • Where to download Sample App for OBIEE 11.1.1.6

    Where to download Sample App for OBIEE 11.1.1.6

    Hi,
    its no need u can use the same Sample App for OBIEE 11.1.1.5 RPD,catalog it should work.
    http://www.oracle.com/technetwork/indexes/samplecode/bi-sample-522115.html
    in oracle there is no seprate Sample App for OBIEE 11.1.1.6 code. for more
    http://docs.oracle.com/cd/E23943_01/index.htm
    Thanks
    Deva

  • Where to add a For Loop?

    Hi, I have got this Generator&Acquisition vi that saves digital data from a pickup signal and adds 10kHz to the driving signal when I press the "Save and add 10kHz" button. I would like to automate this so that I don't have to press this button for each sample. I have tried to put a For Loop at different places, but unfortunately this one stops the sample acquisition or doesn't leave it enough time to reniew the incoming signal. Would you have an idea of where I could place the For Loop to obtain the same result as when I click on the "Save and add 10 kHz"? Best, Ninskaya
    Attachments:
    automatization2.vi ‏411 KB

    Dave,
    I would suggest:
    1) Relocate the samplers to the E RAID assuming that you have sufficient space. If F is already handling cache and scratch duties, he is already pretty "busy".
    2) If you performance after moving the samplers is OK, you are done.
    3) if performance is too slow add another internal or external drive for the samplers (USB 3.0 or Thunderbolt or eSATA, USB 2.0).
    Regards,
    Jim

  • Chart Account  Sample for Trading and Service

    Hi Experts,
    Can you provide me sample of chart of accounts ( segmented) where it is both for trading ( sales of components ) and service ( installation).
    Please, your sample is highly appreciated for a new entry like me in SAP.
    Cheng

    Hi Cheng,
    CoA is a huge list. It is not feasible to put it here. Beside, there are so many variables from every accounting department. There is no universal used CoA.
    The above suggestions are good start you can follow.
    Thanks,
    Gordon

  • Where to put data processing routine when acquiring data using DAQmx

    I have a program that is aquiring data using the DAQmx Acquire N Samples mechanism with automatic reset and a data handler callback routine. DAQmx acquires N samples (usually 1024) from the board, calls the handler to do something with it, and then resets to get the next batch of data. The program acquires a number of lines of data, say 512 lines of N points each, with one callback call per line. Triggering is done by a hardware trigger at the start of each line of data. So far so good.
    The issue is that the time that it can spend in the callback is limited, or else the callback is not finished when the next batch of data is ready to be transferd from the DAQmx buffers and processed. There is a substantial amount of analysis to be done after the entire frame has been acquired, and it ends up taking far longer than the time between lines; so where to put the processing? The data acquisition is started from a control callback callback that exits back to the idle loop after it starts the data acquisition process, so there is no code waiting to execute, to return to, when the data acquisition is finished.
    I could try to put the data analysis routine into an idle-time routine and trigger it with a semaphore, or I could put it into a timer control callback with, say, a 10 millisecond repetition rate and poll a flag, setting the flag when all of the data has been acquired. Any suggestions would be appreciated.

    I would recommend using Thread Safe Queues. Your acquisition callback can place items in the TSQ and then you can process the data in a separate thread. TSQs are nice because they allow you to install a callback function to run for certain events. Most importantly, you can install a callback for the Items in Queue or Queue Size Changed event which will run the callback if a certain number of items are in the queue. This lets you take advantage of multithreading in a simple and safe way using a standard Producer/Consumer architecture. However, you may still run into problems with this architecture if your acquisition thread is running much faster than the consumer thread. You could eventually overflow the queue. In that case, your only options are to either get a faster system, slow down the acquisition or do the data handling post process.
    National Instruments
    Product Support Engineer

  • Where to put ~ITSMOBILEDEVICEINCLUDE html-file?

    Hi,
    we are building an ITS Service based on ABAP-Dynrpos (similar to LM01).
    We are using the Motorola (Symbol) MC3100 Handheld Scanner and want it to perform an "Auto-Enter" after scanning a barcode.
    I found this:
    http://service.sap.com/sap/support/notes/1311169
    Mobile Devices and Browser - Wiki - SCN Wiki
    My understanding is, that we need to define a ~ITSMOBILEDEVICEINCLUDE in the service (in SICF).
    But where to put this device specific HTML-file on the server? Or am I misunderstanding something here...?
    Thank You for your input!
    Jan

    Never mind, I found out myself. You can create this file directly in SE80.
    Navigate to Your ITS service in SE80 and then right click on the "HTML Templates" node of your ITS-Service, then choose "create" from the context menu...
    Samples of device include files can be found in SE80 for ITS-Service ITSMOBILE01:
    Regards
    Jan

  • I changed my iPhone lately but i can't restore my last backup since it keeps saying "itunes could not restore backup because the password was incorrect" but I don't know where to put the password to make it happen... Any suggestions?

    Hey guys,
    I just bought a new iPhone but i can't restore my backup files beacuse it keeps saying "itunes could not restore backup because the password was incorrect" but I really don't know where to put the password to restore it. I really have some files that are meaningful for me so I really need help. Any suggestions anyone?

    Select your iDevice in the iTunes.
    Choose the Summary screen (tab) and scroll to the bottom of the screen.
    Then un-select Encrypt iPhone backup.
    iTunes will then prompt you to “Enter the password to unlock your iPhone backup”, enter the password you set originally.

  • My computer screen keeps going blank and then going back to the box where I put my password in to start my comp. Why is this happening?

    My computer (Macbook) was working fine this am. I left it for an hour and then came back and the screen was black (always does that as the screensaver hardly ever works). I moved the mouse to wake it up and everything was normal. I went to adjust the volume and the screen went blank and the main page with the box where I put my password in when I first start my comp appeared. I put my password in and everything was normal again. I opened a window in Safari and before it loaded completely the same thing happened, the screen went blank and went back to the password box. Does anyone know why this is happening? I don't have an external hard drive or any blank flash drives so I can't back anything up right now and am afraid I'm going to lose everything. Thank you

    Sounds like hardware failure, called boot loop. Call Apple and or go on apple.com and make Genius Bar appointment to have your iphone reviewed by a Tech. Provided you iphone shows no physical or liquid damage they will take care of you, or if you have Apple Care Plus
    Genius Bar Rerservation :  http://www.apple.com/retail/geniusbar/

  • I am trying to organize a zip file with a bunch of links and files. But when I drag an image file to a folder, it always "Snaps to grid" instead of just landing where I put it.

    I am trying to organize a zip file with a bunch of links and files. But when I drag an image file to a folder, it always "Snaps to grid" instead of just landing where I put it. All of the files are going into the same zip file but I want them visually in the space that I put them and not at the bottom of the snap to grid folder location they are looking like.  I am trying to  drag and drop files in groups so that I can group them for now, but image files always do their own "sort by" when I drag them from my web pages. Links don't do it though.  I tried resetting the folder, and deleting the DS files. No luck.

    You keep asking variants on this same question. You've had replies in all your other threads. If you can't find them, go here and click where it says Activity:
    Thomas Cannon Jr.

Maybe you are looking for