Where to put the Licecse key of Weblogic 7.0

I have installed an Evaluation Version of Weblogic 7.0. I have also downloaded the required xml file. Please let me know as how to use this xml file to run my weblogic server.
Thanks
Amit Kumar

put license under the root (c:\bea) & run update license.
amit kumar <[email protected]> wrote:
I have installed an Evaluation Version of Weblogic 7.0. I have also downloaded
the required xml file. Please let me know as how to use this xml file
to run my weblogic server.
Thanks
Amit Kumar

Similar Messages

Which field do you put the 'network key' in?

Does anyone know where you put the 'network key' I.D. in the utility client program?

Welcome to the Apple Community.
It sets itself automatically.
Assuming this is not the first time you have used your Apple TV
    1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    2.    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    4.    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Architecture question...where to put the code

Newbie here, so please be gentle and explicit (no detail is
too much to give or insulting to me).
I'm hoping one of you architecture/design gurus can help me
with this. I am trying to use good principals of design and not
have code scattered all over the place and also use OO as much as
possible. Therefore I would appreciate very much some advice on
best practices/good design for the following situation.
On my main timeline I have a frame where I instantiate all my
objects. These objects refer to movieClips and textFields etc. that
are on a content frame on that timeline. I have all the
instantiation code in a function called initialize() which I call
from the content frame. All this works just fine. One of the
objects on the content frame is a movieClip which I allow the user
to go forward and backward in using some navigation controls.
Again, the object that manages all that is instantiated on the main
timeline in the initialize() function and works fine too. So here's
my question. I would like to add some interactive objects on some
of the frames of the movieClip I allow the user to navigate forward
and backward in (lets call it NavClip) . For example on frame 1 I
might have a button, on frame 2 and 3 nothing, on frame 4 maybe a
clip I allow the user to drag around etc. So I thought I would add
a layer to NavClip where I will have key frames and put the various
interactive assets on the appropriate key frames. So now I don't
know where to put the code that instantiates these objects (i.e.
the objects that know how to deal with the events and such for each
of these interactive assets). I tried putting the code on my main
timeline, but realized that I can't address the interactive assets
until the NavClip is on the frame that holds the particular asset.
I'm trying not to sprinkle code all over the place, so what do I
do? I thought I might be able to address the assets by just
providing a name for the asset and not a reference to the asset
itself, and then address the asset that way (i.e.
NavClip["interactive_mc"] instead of NavClip.interactive_mc), but
then I thought that's not good since I think there is no type
checking when you use the NavClip["interactive_mc"] form.
I hope I'm not being too dim a bulb on this and have missed
something really obvious. Thanks in advance to anyone who can help
me use a best practice.

1. First of all, the code should be:
var myDraggable:Draggable=new Draggable(myClip_mc);
myDraggable.initDrag();
Where initDrag() is defined in the Draggable class. When you
start coding functions on the timeline... that's asking for
problems.
>>Do I wind up with another object each time this
function is called
Well, no, but. That would totally depend on the code in the
(Draggable) class. Let's say you would have a private static var
counter (private static, so a class property instead of an instance
property) and you would increment that counter using a
setInterval(). The second time you enter the frame and create a new
Draggable object... the counter starts at the last value of the
'old' object. So, you don't get another object with your function
literal but you still end up with a faulty program. And the same
goes for listener objects that are not removed, tweens that are
running and so on.
The destroy() method in a custom class (=object, I can't
stress that enough...) needs to do the cleanup, removing anything
you don't need anymore.
2. if myDraggable != undefined
You shouldn't be using that, period. If you don't need the
asset anymore, delete it using the destroy() method. Again, if you
want to make sure only one instance of a custom object is alive,
use the Singleton design pattern. To elaborate on inheritance:
define the Draggable class (class Draggable extends MovieClip) and
connect it to the myClip_mc using the linkage identifier in the
library). In the Draggable class you can define a function unOnLoad
(an event fired when myClip_mc is removed using
myClip_mc.removeMovieClip()...) and do the cleanup there.
3. A destroy() method performs a cleanup of any assets we
don't need anymore to make sure we don't end up with all kinds of
stuff hanging around in the memory. When you extend the MovieClip
Class you can (additionally) use the onUnLoad event. And with the
code you posted, no it wouldn't delete the myClip_mc unless you
program it to do so.

Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk.

Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk. I press the :c" button on startup but its not picking up the disk in the rom, i have tried to put the disk in an external rom but same answer, am starting to think that my os disk is bad. Please help me.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I changed my iPhone lately but i can't restore my last backup since it keeps saying "itunes could not restore backup because the password was incorrect" but I don't know where to put the password to make it happen... Any suggestions?

Hey guys,
I just bought a new iPhone but i can't restore my backup files beacuse it keeps saying "itunes could not restore backup because the password was incorrect" but I really don't know where to put the password to restore it. I really have some files that are meaningful for me so I really need help. Any suggestions anyone?

Select your iDevice in the iTunes.
Choose the Summary screen (tab) and scroll to the bottom of the screen.
Then un-select Encrypt iPhone backup.
iTunes will then prompt you to “Enter the password to unlock your iPhone backup”, enter the password you set originally.

Where to put the commit in the FORALL BULK COLLECT LOOP

Hi,
Have the following LOOP code using FORALL and bulk collect, but didnt know where to put the
'commit' :
open f_viewed;
LOOP
fetch f_viewed bulk collect into f_viewed_rec LIMIT 2000;
forall i in 1..f_viewed_rec.count
insert into jwoodman.jw_job_history_112300
values f_viewed_rec(i);
--commit; [Can I put this 'commit' here? - Jenny]
EXIT when f_viewed%NOTFOUND;
END LOOP;
commit;
Thanks,
- Jenny

mc**** wrote:
Bulk collect normally used with large data sets. If you have less dataset such as 1000-2000 records then you canot get such a performance improvent using bulk collect.(Please see oracle documents for this)
When you update records Oracle acquire exclusive lock for that. So if you use commit inside the loop then it will process number of records defined by limit parameter at ones and then commit those changes.
That will release all locks acquired by Oracle and also teh memory used to keep those uncommited transactions.
If you use commit outside the loop,
Just assume that you insert 100,000 records, all those records will store in oracle memory and it will affect all other users performance as well.
Further more if you update 100,000 records then it will hold exclusive lock for all 100,000 records addtion to the usage of the oracle memory.
I am using this for telco application which we process over 30 million complex records (one row has 234 columns).
When we work with large data sets we do not depends with the oracle basic rollback function. because when you keep records without commit itb uses oracle memory and badly slowdown all other processes.Hi mc****,
What a load of dangerous and inaccurate rubbish to be telling a new Oracle developer. Commit processing should be driven by the logical unit of a transaction. This should hold true whether that transaction involves a few rows or millions. If, and only if, the transaction is so large that it affects the size constraints of the database resources, in particular, rollback or redo space, then you can consider breaking that transaction up to smaller transactions.
Why is frequent committing undesirable I hear you ask?
First of all it is hugely wasteful of rollback or redo space. This is because while the database is capable of locking at a row level, redo is written at a block level, which means that if you update, delete or insert a million rows and commit after each individual statement, then that is a million blocks that need to go into redo. As many of these rows will be in the same block, if you instead do these as one transaction, then the same block in redo can be transacted upon, making the operation more efficient. True, locks will be held for longer, but if this is new data being done in batches then users will rarely be inconvenienced. If locking is a problem then I would suggest that you should be looking at how you are doing your processing.
Secondly, committing brings into play one of the major serialization points in the database, log sync. When a transaction is committed, the log buffer needs to be written to disc. This occurs serially for multiple commits. Each commit has to wait until the commit before has completed. This becomes even more of a bottleneck if you are using Data Guard in SYNC mode, as the commit cycle does not complete until the remote log is notified as written.
This then brings us two rules of thumb that will always lead a developer in the right direction.
1. Commit as infrequently as possible, usually at the logical unit of a transaction
2. When building transactions, first of all seek to do it using straight SQL (CTAS, insert select, update where etc). If this can't be easily achieved, then use PL/SQL bulk operations.
Regards
Andre

I wanted to know explain my problem down package cc2014 where I put the serial number of the problem that I have is that when you open the program asks me start of session in which he put it and go but back inside and it drives me to request the start of

I wanted to know explain my problem down package cc2014 where I put the serial number of the problem that I have is that when you open the program asks me start of session in which he put it and go but back inside and it drives me to request the start of session and I take 3 weeks or more with this problem if they can support me solve it was the number of seire wearing this being installed at a private university

Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page

Where to put the Transform.xsl File

Good evening!
I am trying to execute a bpel:doXslTransform(xslURI,$a) and i dont know where to put the transform.xsl file for this operation.
Can anybody tell me?
Greetz,
RaRu

It needs to be in the same folder as the .bpel process - the bpel folder of your project.
Hope this helps,
Shanmuhanathan Thiagaraja

Putting the license key in the installer w/ wix and RDC

Post Author: dblock
CA Forum: Crystal Reports
I am rewriting an old installer in wix (wix.sourceforge.net). The installer deployed RDC "by hand", where they picked the files and stuck them into the InstallShield installer. I got the merge modules instead. The readme for the merge modules says:
license.msm - This merge module is used to apply the license keycode during installation. It exposes a custom property called License Key which must be populated with the keycode found on the Crystal Reports 9 CD envelope. This merge module is always required.
What does this mean? Do I just create a property called License Key and put the key in there? Has anyone done this with wix?
thxdB.

Dell - Internal Use - Confidential
Hello Anubha,
Thank you for getting back to me. The customer has a larger issue than the serial number, he is missing updates and the .Net Framework would not install in order to apply the updates. We will try a new approach to resolve the issue. You can archive this case.
Regards,
Monisa O’Brien
Sr. Technical Support Specialist
Dell | ProSupport
Toll Free 1 866 876 3355
[email protected]<mailto:[email protected]>
My work schedule is 8:30 am - 5:30 pm CST | Mon, Tues, Wed, Thurs, and Fri.
Customer feedback | How am I doing? Please contact my manager Jim Archer<mailto:[email protected]>

In HELLO Where doI put the email address of a contact.

I must be very stupid (admitted) but I cannot get Hello to work for me. Where do I put the email adddress of a person I wish to contcact.

Hi Brad,
I really appreciate your taking the effort to help - I must be the greatest of idiots or someting is wrong with my system. I click on the Hello button at the top of my screen and this brings up a panel stating "conversation 1" and below that "Start a conversation" in a blue box. I cannot see the two tabs you refer to "one for chat and other for contacts."
Unfortunately I am going away for a few days and will not be able to respond, but certainly will when I return.
Thank you for your interest.

JNI where to put the jnilib?

I have a smal calculating code, and need it fast done, therefore I will use the JNI.
On MacOSX there is no problem doing this with a dylib, compile the dylib, compile the jnilib put them in the Bundle .. ready to deploy. Easyly done.
On WIN I get a messsage of unknownsource in the ClassLoader., Runtime. and System. loadlibrary(blah)
Where do I have to put the blah.jnilib and the dll to get the applikation used of them??
Must the library path set to get the compiled jnilib run on WIN?? Where do i have to set the path for the jnilib and the dll? DLL in system 32 I guess but where the jnilib???
Or should i just name the prefix of blah when compiling .dll instead of .jnilib, but then I need to manage the file using on different platforms isn�t so??
thanks for help

Windows will find the DLL if it is listed in the PATH environment variable. On Windows XP, I click Start / Control Panel / System / Advanced / Environment Variables. I can then edit the path string which is a semicolon-separated path list.
If you do not want to mess around with the environment variables, you can allways do it M$-style and squeeze the DLL into c:\windows\system32 amongst the other couple hundreds of DLL's already there.

Suggestion needed: Where to catch the 'Enter' key

Hi,
Could someone give me guidance. Below is the background and question of what I would like to do. (Note: There would be so much code I am hoping that someone can understand this without it but I will look later tonight at your possible responses to determine if I need to add some code snippets.)
BACKGROUND:
I have an application with a JTabbedPane added to the content pane of the JFrame.
The JTabbedPane has five JPanels added as tabs each of which extends ActionListener. When it creates each JPanel it passes itself as the argument (this).
Each of these 'major' JPanel tabs has several (2-4) 'mini' JPanels added to them and all the various JButtons, JComboBoxes, and JTextFields are added to the 'mini' JPanels.
The JComboBoxes and JTextFields are enclosed in my own separate wrapper classes so I can do some special validation, etc.
One of the 'mini' JPanels is always named 'buttonPanel' and is where the 'cancel' and 'continue' JButtons are added. The buttons are registered with an ActionListener and allow access to the next 'major' JPanel after some checks are performed. Right now the buttons are caught by the ActionListener of each 'major' JPanel
I WOULD LIKE TO:
I would like to have the 'Enter' key perform a 'continue.doClick()' on whatever 'major' JPanel is active (there are many validations to be done on each 'major' panel before the continue button can allow the user access to the next tab). There are from 1-3 other buttons in the same buttonPanel as the 'continue' button so if any of them have the focus then the 'Enter' key action should be handled by them.
I would like to have the 'Escape' key perform a 'cancel.doClick()' on whatever 'major' JPanel is active. The 'Excape' key does not have to defer to any other button actions like the "Enter" key does.
Where would I extend the KeyListener? The JTabbedPane has a changeListener method that keeps track of what tab I am on, would this be someplace that could help keep track of what 'major' JPanel continue button should be called?
Thanks very much.
hopi

You can use an InputMap and ActionMap combination to map an action on the JPanel that is currently selected to the Enter key.
This will allow you to add an ActionListener which is called whenever the enter key is pressed. Then you can cycle through the available buttons and determine which on has focus and call doClick on it. The cycling may require you to place all the buttons in an Array or a Vector.
ICE

Where to put the url endpoint for changing between enviroments?

Hello,
I have created a few jax-ws clients. I am now in development stage, but in the future I will want to put them in preproduction enviroment. where is the best place to put the service urls for calling it and changing in an easy way?
I came from dot net world, I am used to a web.config file which I can change in hot, does java have something like that?
Thanks in advance.

If you are using Spring then these will be helpful to you-
[http://blog.vinodsingh.com/2008/11/environment-specific-property-with.html|http://blog.vinodsingh.com/2008/11/environment-specific-property-with.html]
[http://blog.vinodsingh.com/2008/05/webservice-endpoint.html|http://blog.vinodsingh.com/2008/05/webservice-endpoint.html]
if not then you can devise some thing similar.

Where to put the patches ????

Hi All,
I have a question about where to keep the patches on weblogic6.1+sp2.
what is the best practice/way to put the patches on wls6.1/wls8.1 .....iam more or less interested on putting these patches on wls6.1+sp2
say for some reason, i need 4 patches(which are related to the same problem) ....and i downloaded it from support.bea.com site ...and then ......what is the best practice to place them....where ??
We have been keeping the 4 patches(or all of them) at CLASSPATH level....but i don't know if it could be a issue for HOT DEPLOYMENT or not ....OR some other issues ?
please let me know what is the BEST practice and other practices of keeping these patches ????
thanks alot.
-sangita

I put patches on the knees of my denim overalls. I also like to wear a straw hat and carry around a pitchfork. It makes me look like a hick, but people better respect me or I will spear them with my pitchfork!

Where to put the Windows sticker?

Anyone got any ideas? I'm thinking under the batter on that thing that tells you how to put the RAM in but I thought I'd just ask to see if anyone ran any problems with that. Probably silly but you never know.

AHHH We thought you were asking about the little Windows sticker that PC makers put on the palmrest.Sorry about that.I would keep the "key" sticker in a file cabinet with all irreplacable items.
Jim
iMac G5 20"/2.1 Ghtz/2.5 GB OWC RAM/250 GB HD Mac OS X (10.4.6)

Where to put the Licecse key of Weblogic 7.0

Similar Messages

Maybe you are looking for