Where to see the standard Maps  in import manager ?

hi to all
               I am working on MDM 5.5 Import Manager i want to know where exactly we see the standard maps of employee,vendor,product,customer in order to import data from sapR/3 .

thanks rajani for ur help ,i will be glad if u provide me some more information regarding the linkage of Maps with the agency and also Where exactly the Global attributes are maintained is it the console design or in the client.
regards
kanth
Message was edited by: lakshmi kanth
Message was edited by: lakshmi kanth

Similar Messages

  • HTTP adapter: where to see the transformed output message

    All,
    I am a beginner in Webservices/HTTP interfaces in PI. I have to make changes on an existing custom interface which uses HTTP adapter. I have done the changes in the message mapping and tested it using the test tool. It seems OK.
    However when we do end-to-end testing, data is flowing but  bussiness needs a copy of the transformed data that has been sent out from PI.
    I checked RWB->Message Monitoring-> Integration server(Database) and it showed the successful message. When I drilled further into this message, it showed the SOAP message (Version 0 and Version 1 with payload). The payload showed the data that ECC had sent to PI and not the transformed data that went out from PI to 3rd party via HTTP adapter.
    Appreciate if you could guide me in right direction regarding where to see the Output/Transformed data that is actually sent to third parties.
    I have checked SXI_MONITOR as well in PI but that also shows the payload only and not the transformed data.
    Regards
    SK
    Edited by: Shirin K on Feb 18, 2010 3:10 PM

    Hi ,
    Go to particular message in SXI_MONITOR. In Message there will be window on left hand side. There will be Technical Routing.
    Technical Routing> Payloads->Maindocument. This shows the Output data.
    If you are not able to see Technical Routing inform you basis team they need to do some configuration in SXMB_ADM
    Edited by: Rajhans Abhay on Feb 18, 2010 4:29 PM

  • Where to see the size of the file in XI system

    where to see the size of the file in XI system..i mean after sending it into XI....
    Edited by: Harsha reddy on Jun 25, 2008 5:51 PM

    Hi,
    You can UDF like in Message Mapping to get the file size.
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","SourceFileSize");
    fileSize = conf.get(key);
    You have to mention adapter specific attribute for file size in file adapter.
    How to retrieve file size and XI message ID?
    Kulwinder
    Reward if Helpful

  • Where to see the transaction code for a script

    Hai my dout is  where to see the transaction code for a script after assigning to  a drive programm for example i see output for medruck in me11 and for other standard scripts where can i see the  output is there any table avaible to check it

    Hi masthan,
       for sd and mm related scripts. u can use tnapr.
    Otherwise go to nace transaction u can find the script name as well as program name.
    Or u can try with TSTC table, which will give the t/c's.
    Regards...
    Arun.

  • I can no longer see the top menu bar in itunes.  where you see the status of syncing.  where you have the option to click and move a song you are playing to the middle of the song, etc.

    I can no longer see the top menu bar in itunes.  where you see the status of syncing.  where you have the option to click and move a song you are playing to the middle of the song, etc.

    It's iTunes screen menubar:

  • 12c where to see the enabled audited operations

    hi,
    I got to see the audited operation data in setup->auditdata but I am not able to find where to see the enabled audit operation names.
    The following command shows only the list of operations can be audited but it doesnot say whether it is already enabled or not
    emcli show_operations_list
    please suggest me
    cheers
    Tamil

    Try adding -view=DETAIL
    bash-4.1$ ./emcli show_audit_settings -view=DETAIL
    Audit Switch : Enabled (For all Operations)
    Operations configured for auditing :
    ADD_AGENT_REGISTRATION_PASSWORD : ENABLED
    ADD_CS_TARGET_ASSOC : ENABLED
    AGENT_REGISTRATION_PASSWORD_USAGE : ENABLED
    AGENT_RESYNC : ENABLED
    AG_AUD_CREATE : ENABLED
    AG_AUD_DELETE : ENABLED
    AG_AUD_MODIFY : ENABLED
    APPLY_TEMPLATE : ENABLED
    APPLY_UPDATE : ENABLED

  • CO88 - Where to See the results of Execution?

    Gurus,
    Where to see the results after executing CO88?
    Kindly guide.
    Thanks.

    Dear,
    In order maintaince screen follow the menu path CO02 - Goto> Costs> balance.
    Or you can chek in order cost sheet itself, the actual cost sum is zero or not if ZERO than means settled.
    Collectively you can see in KKBC_HOE report.
    Regards,
    R.Brahmankar

  • Where to see the output of my Application Engine Program ?

    Folks,
    Hello. I am creating my first AE program in Application Designer and test it in the 2-tier mode. I open the AE program in Appication Designer and click Edit ->Run Program. Then open the log file to see its execution and know the AE program is running out. But I don't know where to see the output of the AE program.
    The AE program is only executing a SQL "select" statement. Its output is the ResultSet of the SQL.
    Do any folks know where to see the output of the AE program ?
    Thanks in advanced.

    The AE program is only executing a SQL "select" statement. Its output is the ResultSet of the SQL.
    Do any folks know where to see the output of the AE program ?The output of the select didn't go anywhere. You have to actually do something with the values selected. App Engine selects them and puts them in memory (if you tell it to through %Select), but where those values go depends on you. If you have a DoSelect, then your next action may be an SQL insert/update/delete or even another %Select. If it is another %Select, then I would expect your next action to be Call Section or PeopleCode.
    If you just want to select data and print it to the app engine log file, then I would setup a step with a DoSelect/%Select and then a PeopleCode action. In your PeopleCode action, use MessageBox(0, "", 0, 0, "The value in field MYFIELD is " MYREC_AET.MYFIELD);
    I wrote a blog post a few years ago with additional tips and tricks for AppEngine output: http://jjmpsj.blogspot.com/2008/05/appengine-output-tricks-reporting.html.

  • Where to see the postings?????

    hi
    I hav done MIRO but unable to se the posting in MIRO screen? Where to see the postings.?

    tnx....
    i am getting "The subsequent documents missing in MIRO"..........??????????...

  • So where we see the status of this work order request

    Hi All,
    I have submitted work order WO00034931 in SAP for a new vendor address but it seems my approver (Andre Vabre) never received it. In SAP, its status is “Submitted for Approval”.
    So where we see the status of this work order request
    Thanks,
    Kumar

    Hi
    You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
    variant conditions to define surcharges and discounts for a variant
    Variant u2013Pricing steps
    Create condition record
    create a procedure where you enter the reference from the characteristic
    Assign the procedures to either the characteristic values
    configure the material in the sales order
    The net price for the material is displayed
    If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
    In addition, the Conditions pushbutton is displayed.
    On pressing this pushbutton,
    One can see which conditions have
    influenced the price.
    I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
    Thanks

  • During/after upgrading to ios8.1 my ipad air is looping is a screen where i see the apple logo after a minute or so i see a flash of bleu then black en the it starts over again....i can't even turn of.

    During/after upgrading to ios8.1 my ipad air is looping is a screen where i see the apple logo after a minute or so i see a flash of bleu then black en the it starts over again....i can't even turn of. Help?

    Hi,
    Had the same issue.  Hard reset not working.
    What I did was: start your mac/pc and open iTunes, hold down the home button of the iPad (and while holding the button), connect it to the PC with the cable.
    Keep pressing until you get a pop-up asking to upgrade or restore.
    Hope this helps for you!
    Xavier

  • WHER I SEE THE STOCK  IN VARIENT CONFIGURATION

    Hi
      Gurus,
    Where i see the stock of different varients available in plant .for example  i want to the stock of yellow,red,black sheets with thichness and width from     which  this any t-code or tables.
    Thanks in advance
    avinash.pegarlawar

    Hi,
    It is not possible to maintain the stock for variant configuration materials. This is purely MTO scenario.
    Regards,
    V. Suresh

  • I only see the phone numbers of my contacts when using iMessage on my MAC, whereas I see the names on my iPhone. Why, and how can I make it so I see the names (and pics) on my MAC?

    I only see the phone numbers of my contacts when using iMessage on my MAC, whereas I see the names on my iPhone. Why, and how can I make it so I see the names (and pics) on my MAC?

    Thanks Eric, but that was already turned on. I just now tried turning it off and on again, no change. Actually, I"m more interested in seeing the names than the pictures. I now only see the phone numbers and generic avatars where pics would be.

  • See Multiple node names under Import manager source table of single XML

    Hi,
    I have a xml file with differnt nodes of following structure when it comes to IMport manager It shows multipletable names where I can choose Business Partner, Partner, RemoteSystem... But My maps are based on Partner only.. Now I need to update the look up Qualifer table.. of which values are in Type.. Which I am unable to see under Partner node in import manager...I dont see the fields of Type Node under Map Filed/Values tab...
    <Business_partner xlms....
    --<Partner>
    <Address>
    <name>   
    <name1>
    <Role>
    <A>   
    <B>
    <Remote SYstem>
    <name>   
    <Code>
    <Type>
    <Type>   
    <Type2>
    Can any one put there comments please..
    Thanks
    Rajeev

    Hello Rajeev
    "Import manager guide"
    page 36:
    "For XML source files, the source table list displays the nested elements defined in the XML schema."
    page 44:
    "The XML Schema list includes an entry for each XML schema defined in the MDM Console."
    page 86:
    "Ways in which the Source Hierarchy tree now reflects an XML fileu2019s structure include:
    u2022 Top-level node is the source XML file
    u2022 Tables in the tree represent nested XML structures
    u2022All tables are nested under the root element
    u2022 Fields in the tree represent data-storing XML elements
    u2022 Joins and _ID fields are no longer added or required
    With these changes, users no longer have to manually recreate the relationships implicit in the XML schema, as they are preserved by MDM and accurately reflected in the source hierarchy tree.
    NOTE ►► To ensure that Import Manager correctly interprets the structure of an XML file, specify its corresponding XML schema file in the Connect to Source dialog (see u201CStarting and Exiting the Import Manageru201D on page 43 for more information)."
    page 188:
    "When the source is an XML file, the Available Fields list is limited to nodes which are siblings (on the same level as), or children of (nested below) the currently selected Source Hierarchy tree node."
    page 213
    "For example, if a source file is in XML format, Import Manager uses a tree in the Source Fields grid to depict the nested structure of fields within the associated XML schema."
    Use XML schema for right node showing
    Regards
    Kanstantsin Chernichenka

  • Create key mapping using import manager for lookup table FROM EXCEL file

    hello,
    i would like create key mapping while importing the values via excel file.
    the source file containing the key, but how do i map it to the lookup table?
    the properties of the table has enable the creation of mapping key. but during the mapping in import manager, i cant find any way to map the key mapping..
    eg
    lookup table contains:
    Material Group
    Code
    excel file contain
    MatGroup1  Code   System
    Thanks!
    Shanti

    Hi Shanti,
    Assuming you have already defined below listed points
    1)  Key Mapping "Yes" to your lookup table in MDM Console
    2) Created a New Remote System in MDM console
    3) proper rights for your account for updating the remote key values in to data manager through import manager.
    Your sample file can have Material Group and Code alone which can be exported from Data Manager by File-> Export To -> Excel, if you have  data already in Data Manager.
    Open your sample file through Import Manager by selecting  the remote system for which you want to import the Key mapping.
    (Do Not select MDM as Remote System, which do not allows you to maintain key mapping values) and also the file type as Excel
    Now select your Soruce and Destination tables, under the destination fields you will be seeing a new field called [Remote Key]
    Map you source and destination fields correspondingly and Clone your source field code by right clicking on code in the source hierarchy and map it to Remote Key if you want the code to be in the remote key values.
    And in the matching criteria select destination field code as a Matching field and change the default import action to Update NULL fields or UPDATED MAPPED FIELDS as required,
    After sucessfull import you can check the Remote Key values in Data Manager.
    Hope this helps
    Thanks
    Sowseel

Maybe you are looking for