Where to set assign CO when calcalate depreciation (AFAB)

now i have  CO (Cost center )in each assets .
but when i run depreciation AFAB
it's not calculate depreciation to CO
where to set Cost center ?
please help.

Hi,
try in t-code : ACSET.
hope it can help.

Similar Messages

  • I have Java set up as a plug in but cann't get into yahoo games. Where is the firefox button when I have the browser open? Only button I see gives me close, resize,

    I have java installed and properly working as a plug in. Why can I not get into Yahoo games and play Card Games? Where is the firefox button when I have the browser open? Only button that looks like anything for firefox allows me to restore, move, size, minimize, maximize, and close. That button is top left hand corner location.

    I recently purchased a second hand new macbook air, although it was second hand to me the previous owner had never actually turned it on.
    Something doesn't make sense here, though I'm not saying the previous owner is lying....
    Time to send your serial # to iTS and let them see what's happening here.
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • How to set a picture when you long- in

    how to set a picture when you long- in

    How to set a picture when you log in to where ?

  • How to solve error when run Depreciation (T-Code:AFAB)

    Dear All Experts,
    Hi,
    I found error when run Depreciation for period 9 FYI. I had run Planed posting period Depreciation (TCode: AFAB).  with fiscal year: 2010, posting period: 9, reason for posting run: Planed posting run. Select on Test Run. Then i found error message as below.
    Documents manually posted within dep.doc.number range
         Message no. AA728
    Diagnosis
         In the number range interval for the document type for posting
         depreciation, a document  has been posted which was not created within
         the framework of depreciation posting. The last document posted by
         depreciation posting was assigned the number .
    Procedure
         Contact your Systems Specialist. When changing the number range interval
         for the document type in depreciation posting, you have to specify a new
         interval in which no documents exist. Using organizational measures, you
         can guarantee that there are no documents apart from those created by
         depreciation posting in this number range.
    Would you help me how to solve this error?
    Thank you in advance
    Best Regards
    Utarat.P

    Hi Utarat,
    first question is: have you really manually posted a Documents within dep.doc.number range 
    If you post with RABUCH00, note 193984 could be relevant for you. 
    Check if the intervall in Table TABA don't fits with the Intervall in BKPF.
    Example:
    TABA
    MANDT BUKRS  AFBLGJ AFBLPE AFBANZ BLNRF      BLNRT      XBUKZ  
    100   XXXX   2010   004    01     4200000013 4200000016 X      
    100   XXXX   2010   005    01     4200000017 4200000020 X      
    100   XXXX   2010   006    01     4200000021 4200000024        
    On the other Hand In Table BKPF (or Tr. FB03) you can see that 4200000037 already   
    exits.                                                                               
    BUKRS  BELNR      GJAHR BLART BUDAT      CPUDT      CPUTM    TCODE
    XXXX   4200000024 2010  YY    30.06.2010 06.07.2010 19:36:30 ABF1 
    XXXX   4200000037 2010  YY    30.06.2010 06.07.2010 19:37:47 ABF1 
    Regards Bernhard

  • Error when run Depreciation Posting Run AFAB

    Hi,
    I found error when run Depreciation Posting Run for period 7 2007.
    FYI. I had run Unplanned Depreciation (TCode: ABAA) with document date 31.10.2007 and posting date 31.10.2007, trans. type 640. After that, i want to run Depreciation Posting Run (TCode: AFAB) with fiscal year: 2008, posting period: 7, reason for posting run: repeat. Select on Test Run. Then i found error message as below. 
    Error Message:
    Documents manually posted within dep.doc.number range
    Message no. AA728
    Diagnosis
    In the number range interval for the document type for posting depreciation, a document  has been posted which was not created within the framework of depreciation posting. The last document posted by depreciation posting was assigned the number .
    Procedure
    Contact your Systems Specialist. When changing the number range interval for the document type in depreciation posting, you have to specify a new interval in which no documents exist. Using organizational measures, you can guarantee that there are no documents apart from those created by depreciation posting in this number range.
    Can any one help how to solve this issue?

    Hi Paul,
    Now I go to TCode: FBN1 - Accounting Document Number Ranges, then i want to change the range for year 2008.
    No Year  From No          To No           Current No          Ext
    03  2001   0300000000   0399999999   -                          /
    03  2002   0300000000   0399999999   -                          /
    03  2003   0300000000   0399999999   -                          /
    03  2004   0300000000   0399999999   -                          /
    03  2005   0300000000   0399999999   -                          /
    03  2006   0300000000   0399999999   -                          /
    03  2007   0300000000   0399999999   -                          /
    03  2008   0300000000   0399999999   -                          /
    03  2009   0300000000   0399999999   -                          /
    Referring back to Asset Accounting, the Reference Document: 19.
    Do it mean that my FI doc. no is 0300000019 ? I bit confuse on this..
    Can you guide me more details on it?
    Thanks in advance.
    Edited by: Nur Aman Abdul Manap on Apr 15, 2009 2:09 AM

  • WRT120N - Can't find where to set DNS I want it to use

    I bought WRT120N to replace a Netgear I had.  
    I cannot find in the management console where to set the DNS servers I want it to use.  
    Can somebody please give me the drill-down to find it.
    Solved!
    Go to Solution.

    I have no idea how I missed that.
    Well, yes I do.  The word STATIC threw me off.  I had just never seen the DNS entries described that way before, although it is technically correct.  I just think of static addresses as those you assign to your own devices on your own network.
    Anyway, thanks.

  • The scroll motion where I set the fill is only scrolling down

    The scroll motion where I set the fill is only scrolling down, even when I set it to go up. Has anyone else expereinced this? Can you help me correct this?

    Hi Crystal,
    Could you please explain in details what you have done so that I can test it out at my end? Is there a live page where I can check the issue? Can you create a trial site on BC and then show it to me so that I can investigate the issue further? Thanks.
    - Abhishek Maurya

  • I wander where to set import job for transports

    I wander where to set import job for transports to be imported automatically. On transport domain controller I can not manage other job than the one for the system itself.
    On the system which is not transport domain controler I have only display function

    are you asking for 'automatic import' in QAS/PRD ?
    When you go to STMS import queue in a particular system like QAS, there you can see a button 'import all'. This will enable to you schedule automatic import periodically in intervals for eg. 15 min or whatever you want.
    just click on import all and it will ask for inputs and schedule
    OR, do you want to confirm for RDDIMPDP job ?
    Run report RDDNEWPP to schedule RDDIMPDP
    Edit: Note 11677 - Transports with event-controlled RDDIMPDP

  • How to start AND end a loop using a Boolean Button set to "Switch When Released" operation

    I have a Boolean button set to "Switch When Released" operation. When I press this button (now it's in the On state) I want to run a loop that does something continupously (for now, let's say it displays a simulated sine wave) until I press the button again (now the button is in the Off state) in which case, I want to end the loop. I am wiring my button to the loop condition that's set to "Continue if true" and have a "Wait Until Next ms Multiple" of 200 ms (I tried up to 500 ms). When I run the VI and press the button the first time, I see the sine wave displayed. But when I press the button again, nothing happens. It looks like it does not respond to the user interface. What's happening. What am I doing wrong? I'm using an Event Handler design pattern. I've also tried the Producer/Consumer (Events) design pattern. But I don't imagine the particular design pattern should make a difference. I've attached my code. Thanx.
    Fataneh
    Attachments:
    My_Event_Handler.vi ‏107 KB

    A simple solution would be to harness the timeout event, where you would put your data simulation. No need for parallel loops and local variables.
    The event timeout is starts out as  -1 (infinite) but pressing the start/stop button toggles between a 200ms and an infinite timout whenever it is pressed. Since the evet structure always runs, all other events (e.g. stop) are also serviced.
    Please ask if anything is not clear... Good luck!
    Message Edited by altenbach on 07-13-2005 04:20 PM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    My_Event_HandlerMOD_CA.vi ‏116 KB

  • Issue where the cart is empty when user logs back in

    Having issue where the cart is empty when user logs back in
    Steps:
    1. User logs into the site
    2. User selects items and the cart is updated
    3. User logs out of their account
    4. User exits/closes the browsers
    5. User then reopens the browser, navigates to the site, logs in and the cart is empty
    My understanding is that the cart should be populated with the previous items since the user did not complete the order.
    I have the following settings:
    in shoppingcart.properties
    persistOrdersForAnonymousUsers=true
    persistOrders=true
    in cookieManager.properties
    sendProfileCookies=true
    in /atg/userprofiling/ProfileRequestServlet.properties
    verifyBasicAuthentication=true
    in /atg/dynamo/servlet/dafpipeline/ProfileRequestServlet.properties
    persistAfterLogout=true
    persistentAnonymousProfiles=true
    Anything else that needs to be set?
    Edited by: boyd4715 on Feb 6, 2013 11:07 AM

    I reset the properties back to their orignal state
    in shoppingcart.properties
    persistOrdersForAnonymousUsers=false
    persistOrders=true
    in cookieManager.properties
    sendProfileCookies=true
    in /atg/userprofiling/ProfileRequestServlet.properties
    verifyBasicAuthentication=false
    in /atg/dynamo/servlet/dafpipeline/ProfileRequestServlet.properties
    persistAfterLogout=false
    persistentAnonymousProfiles=false
    in /atg/userprofiling/ProfileTools.properties
    mergeOrder=false;
    Observateion:
    If an anonymous user comes to the site, adds items to the cart, leaves the site and comes back - the cart is empty - the order repository is not updated
    If a user logs into the site, adds items to the cart and then exits the browser (does not log out), comes back to the site, the selected items are in the cart
    If a usr logs into the site, adds items to the cart, logs out of the site, exits the browser, comes back to the site, the selected items are not in the cart
    An order does not get presisted to the repository until the order is confirmed.
    Based on the last item that explains why the user is not seeing any anything in their cart when they log out. If they do not log out, I assume then that the content of their cart is stored in the cookie.
    So, now the question is - why is this happening - I am not the original author of the site - just trying to get some things fixed on it.

  • Contact sheet: where to set size & can I print with another software?

    Using contact sheet for first time. nice! Blows away Photoshop just as the LR web galleries blow away all others.
    Question: I cannot find where to set the print size, I want to do 11x14
    Also can I save the file and print from Imageprint?
    The help page online talked about templates. I don't see them. Thank You.

    Thanks ... tried the Paper Handling, but no lock.
    Based on the fact that any scaling, "moves" the image down and to the left on the paper ...
    Th only "work around" solution is to ...
    Rotate the PDF page 180, then scale slightly (90% or so ...)
    This pushes the upside down page, down and to the left.
    While this is the opposite of what is desired, the print is then correct when
    it is punched and placed into a three ring binder.
    Assumption is the application that creates the documnt, needs to have the paper margins set. The reality is, an application like Preview, that does not "create anything", needs to handle existing documents PDF, JPEG and print to Custom Page configurations.
    ie: In Preview, Custom Page does not work correctly,
    Thanks allfor the comments and help ...

  • Where to set timezone bettween EBS 12 installation

    when I finished EBS 12 installation,
    I detect the time zone is not suitable, that is the database time zone(select dbtimezone from dual) is different from local timezone (select systimestamp from dual).
    for EBS12 installation, I did NOT find where to identify the timezone. Can you tell me where to set timezone , thanks!

    Please see (Globalization Guide for Oracle Applications Release 12 [ID 393861.1]).
    Thanks,
    Hussein

  • Assign Profitability segment  for Depreciation Run

    Dear all,
    I want to assign  profitability segment for depreciation a/c,Where can i do this?please give me advise .
    Thanks&Regards
    Kumar

    Hi Kumar,
    Profitability segments are used to analyze contribution margins earned out of customer/customer segments. Here COGS is deducted from revenue to get the margin.
    If you want depreciation to be picked up in profitability segment..It has to be picked up through COGS. To do this the depreciation has to be first posted to the cost center involved..which I think you must already have because of cost center assignment to assets. Later from  the cost center you got to move the depreciation to production orders through activity or OH allocation, so that the asset depreciation gets picked up in COGS. After this COGS takes care of flow to COPA
    Hope this helps

  • Set page item when going to single row view

    Is there a possibility to set page items when going to single row view in an interactive report?
    APEX 4.1
    Edited by: Niels Delaere on Nov 21, 2011 4:59 AM

    Thank you for your response, can you (or anyone else) give me a little more help? I can't seem to figure out how to get this working. The thing you are doing in your demo application is exactly what I want to do. Take two values of a certain row and set them in page items Where after in single row view users can see 3 additional regions with additional information based on these values.

  • Where to set Java system parameter for embedded WLS in JDev 11g?

    Hi,
    I am trying to test web service invocation via JAX-WS proxy generation on Jdeveloper 11g.
    When I test client code, I got following error message.
    Exception in thread "main" java.lang.Error: Jaxrpc 1.1 method is not supported.
         at weblogic.webservice.core.rpc.ServiceFactoryImpl.loadService(ServiceFactoryImpl.java:65)
    From a forum discussion, it was suggested to add following java parameter in the path.
    -Ddebug=true -Djavax.xml.rpc.ServiceFactory=oracle.j2ee.ws.client.ServiceFactoryImpl -Djavax.xml.soap.SOAPConnectionFactory=oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnectionFactory -Djavax.xml.soap.SOAPFactory=oracle.j2ee.ws.saaj.soap.SOAPFactoryImpl-Dweblogic.log.Log4jLoggingEnabled=true -Djbo.debugoutput=console
    I can not find where to set this parameter under "Tools"->"Preferences". Is there any place in IDE that I can set this value?
    Thanks for the help,
    Jim

    The parameters are defined in the Run configuration of your application. You find the Run configuration in the project properties under run. Open the 'Default' configuration, there you find the java properties where you put the parameters.
    Timo

Maybe you are looking for

  • W-2 Printing from PDF Spool

    We are having problems with printing w-2's once they are generated through pu19.  The spool generates a pdf file but we are unable to print the spool.  I need to know if anyone is having the same issue and is there a solution or workaround.  We have

  • Statndard S_TCODE object in unmaintained (yellow) status

    Hi Experts, I came across a role in which standard S_TCODE object is in unmaintained(yellow) status. Is there any limit to number of Tcodes which can be added under S_TCODE object? Please help me out to find the reaon. Thanks, Mohit

  • I want my home page to open every time I open a new tab. Where is the setting for that?

    When I open a new tab it is always blank. I want it to automatically open to my home page every time I open a new tab. I thought I found a setting for this, but I can not find it now.

  • VBA in Bex Analyzer

    Dear Experts, I'm running a BI query to extract data then used VBA code to import external data from another Excel file.  After storing the external data in a variable, I'm having trouble getting back to my original worksheet using VBA command Window

  • Will Apple replace my itouch 4th gen even if its not on warranty?

    I dropped my touchi n the toliet accidently, it worked for 30 minutes then it completly shut down. it doesnt charge anymore or even responds when i plug it into my computer.