Where to set the Transfer Function in Photoshop CS5?

Where do I set the Transfer Function in Adobe Photoshop CS5?
My college newspaper uses Transfer Function to control dot gain in B&W photos, saving them as EPS files.
In CS4 it was a button in the print dialog box, in the output section. It brought up a curves-like dialog to set a transfer curve. That button is gone now, and the help files offer no help.
The help files say "Save your file in the Photoshop EPS format, and select the Include Halftone Screen and Include Transfer Function options in the EPS Options dialog box." but doesn't say where to create the curve.
Here's CS5. Compare to CS4 below, and the larger shot below that.
Here's CS4
Here's the transfer curve dialog box in CS4 that I can't find in CS5

Hello!
It might have been removed for the same reasons screen was removed: http://forums.adobe.com/message/3438135#3438135
I'd try to use the same workaround: set a document transfer curves as you want, save it as a template, then open it in CS5.

Similar Messages

The transfer function of the PID block doesn't show the derivator.

Hello,
I am trying to use the PID vi, but I when I try the box by itself, it doesn't behave as a "clasic" PID should behave. The main problem is that I don't manage to see the derivator. In the attached vi I compare the transfer function of the PID vi with the transfer function of a PID built by me. My version shows all what a PID should have: integral section (with decreasing magnitude and -90 phase), center area (with constant magnitude and 0 phase), and derivative area (with increasing magnitude and +90 phase).
The PID vi only shows the integral part.
You can also select a step input, and see the output directly. If you choose a large enough derivative time (100 times bigger than the integrator time), and you look closely to the first part of the output, you will see the pick due to the derivator in my version, but not in the PID.vi version.
Does anyone knows what am I doing wrong?
Kind regards,
Pablo Estevez
Solved!
Go to Solution.
Attachments:
TestPID.vi ‏31 KB

Dear Nathand,
Thanks for your answer, I tried the change and you are right. That shows that this not a standard PID, since that means (and actually I can see it now by checking inside the vi) that it is not using the derivative of the error but the derivative of the process variable. I know that this is used sometimes to prevent the effect of fast changing set-points, but it is a shame that they do not comment on it in the help, and that this is not a selectable feature. Do you know if there is a way to edit these pre-packaged vi's?
One more question, about the labview style. I included the sequences just to group terms and make the code more readable to separate the integrator from the derivator and not have a knot of entangled signals. Specially when I run the clean-up diagram, it gets very entangled. I have been looking for another way to do that (container boxes, groups). It would be nice if you could suggest me something I can do for it.
Thanks again,
Pablo

Where is the extract filter in photoshop cs5?

Where is the extract filter in photoshop cs5? Thanks

from an Adobe Tech Sheet:
Photoshop CS5 can be run as a 64-bit application on Mac OS, 10.5.7 and higher. Because of the changes that were made to the application, some plug-ins are not available when you run Photoshop CS5 either as a 32-bit or a 64-bit application. To work with these plug-ins, run Photoshop CS5 as a 32-bit application, then when you are done using these plug-ins, return to working in Photoshop CS5 as a 64-bit application.
If you copy old plug-ins from previous versions of Photoshop, or third-party plug-ins that are not compatible with Photoshop CS5, into Photoshop CS5's Plug-in folder, you may see different problems, such as errors or crashes.
If you have set the Additional Plug-Ins Folder in the Plug-Ins preferences to a folder, deselect this option, or make sure all the plug-ins in this folder are compatible with Photoshop CS5.
The easiest way to determine if third-party, old plug-ins, or plug-ins from previous versions of Photoshop are causing problems is to move them all into a new folder called "3rd Party plug-ins."
If this folder is outside the Photoshop/Plug-Ins folder, you can use the Additional Plug-Ins Folder Plug-In preference to allow Photoshop to access or not access the plug-ins in this folder.
If this folder is inside the Photoshop/Plug-Ins folder, disable the plug-ins by renaming the folder by putting a tilde (~) as the first character in the folder name.
Plug-ins not supported by Photoshop CS5 on Mac OS, running in 64-bit mode:
Lighting Effects
Extract (Use Refine Mask under the Selection menu)
Variations
Web Contact Sheet II (Web Photo Gallery)
TWAIN support will work on some scanners
Video Preview
Send Video Preview to Device
Embed / Read Watermark
Firewire
Firewire DLL
To run Photoshop CS5 on Mac OS as a 32-bit application, select the Adobe Photoshop CS5 application file, installed by default in the Applications/Adobe Photoshop CS5 folder. Choose File > Get Info, and select Open in 32 Bit Mode. Deselect this option to run Photoshop CS5 in 64-bit mode.
To determine if a plug-in causes an error or crash, remove all old or third-party plug-ins from the Adobe Photoshop CS5 > Plug-Ins folder, and deselect Additional Plug-ins Folder in the Photoshop > Preferences > Plug-Ins preference.

Unable to change reference point location while using the Transform Functions in Photoshop Elements 6.0.

Unable to change reference point location while using the Transform Functions in Photoshop Elements 6.0.

Which operating system are you using?
In photoshop elements 6, as far as i know, you can only change the Reference Point Location for transforms using the small grid in the left hand corner of the tool options bar with Transform enabled.

The scroll motion where I set the fill is only scrolling down

The scroll motion where I set the fill is only scrolling down, even when I set it to go up. Has anyone else expereinced this? Can you help me correct this?

Hi Crystal,
Could you please explain in details what you have done so that I can test it out at my end? Is there a live page where I can check the issue? Can you create a trial site on BC and then show it to me so that I can investigate the issue further? Thanks.
- Abhishek Maurya

How to set the move functionality.

I want to set the move functionality for a Jwindow in solaris. If i click on the ALT F7 then the default move works, I want to set that default fuctionality to my menuitem is it possible.

Do you have any solution regarding this move please tell
K_ramanadham. But how to know your id kalpana there is nothing in your profile. If possible please send it to binduA @yahoo.com

Specifying the numerator and denominator of the transfer function equation

hi
I am going to simulate the second odder problem. But I have problem when I try to define the 2nd odder transfer function
by using externally. I have attached the VI in this mail .
any information in this regard highly appreciated
thanking you
danushka
Solved!
Go to Solution.
Attachments:
second_order_systerm_8.2.vi ‏80 KB

Hello Danushka,
You would need to create a control from the transfer function. Then on the front panel, just expand the denominator column to get zero and first order for the denominator as shown here. Let me know if this helps.
Andy Chang
National Instruments
LabVIEW Control Design and Simulation

Setting the 'WAIT' function

Hi,
Can someone help me to set the wait function to 5 minutes ?
Thanks In advance
Eldad

Set the Wait Mode attribute of the activity to Relative Time, and set the Relative Time attribute to the relative time interval
you want, expressed in <days>.<fraction of days>.
See: http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/workflow.920/a95265/std04.htm#index-Wait-activity---0
Regards,
Clara
Hi,
Can someone help me to set the wait function to 5 minutes ?
Thanks In advance
Eldad

TabStripLayout-View: Where to set the text?

Hello,
I am using a view of the kind TabStrip. For your understanding> Not a normal view with a tabstrip. It is a view similar to Gridlayout, just TabStripLayout.
I can not find where to set the text for the individual tabs, e.g. TAB1, TAB2 etc.
Does anzbodz know?
Regards Thank Mario

I assume you are using a TabStrip layout of a viewset. The tab 'captions' are set in the properties for the viewset. In the explorer outline, expand Windows and click on the ViewSet and in the properties for the ViewSet it will have the captions listed for the tabs and you can change the text there.
Be aware that the tab strip layout for viewsets is a bit limited. As far as I can tell the navigation plugs between views do not work. There are other forum questions/answers on how to use a normal TabStrip element rather than a viewset to get around this.
-Cindy

How to Install the Extract Filter in Photoshop CS5

Extract filter is not available in Photoshop CS5...I guess..however while searching i found somthing http://www.egurudev.com/2011/09/install-the-extract-filter-in-photoshop-cs5.html
Can somebody kindly confirm if this method works...if not please suggest some other alternative..thanks!!

Check this out : http://feedback.photoshop.com/photoshop_family/topics/where_did_the_extract_filter_go_in_p hotoshop_cs5-12e7w3

How to implement the Transfer Function in Real Time VIs?

Hi all,
I'm relatively new to Labview Real Time modoule and want to implement one Controller(not PID one) in Deterministic Loop! I have already designed discrete Transfer Function and searching for the way to build one Controller with it! Is it right to use the Simulation Loop instead of Timed Loop (in this case Deterministic loop) and implement the controller in it?! If it's correct so, should I use the same clock and Priod as Timed Loop?!
It would be very helpful, if there is an Example about using transfer function in Real Time Loops!
thanks for your help,
Mohsen

Hello mhmdi,
Sorry I can't open your VI (looks like it is a new version of LV than I have installed).
You're right - you don't need to convert to a difference equation if you have the CD&SIM Module which can take discrete time transfer functions directly. You don't need shift registers with this function, as it is effectively done internally. If you don't have CD&SIM discrete TF's can be implemented easily just in a timed (or while) loop with feedback nodes or shift registers to replicate each z-1 you need.
Some more ideas:
There are many configuration parameters and options with the Discrete TF VI - which you need to understand for your application and make sure are correct. Sometimes implementing in a basic form (timed loop and shift registers) allows you to see what is happening without any confusing options you might not need.
Are you using the Discrete TF VI in a Simulation Loop ? You might need to think if the loop being used is appropriate for a Real Time application. Maybe the timing of the TF, the loop and the DAQmx data are not all suitable for each other.
I'm not familar with DAQmx, so not sure about any specific real-time aspetcs of that.
"if the sample frequency of the discrete transfer function in the timed-loop is at multiple integers of the sampling rate (e.g. 12000 Hz for tranfer function and 4000 Hz for sampling rate, 12000=3*4000), would it somehow improve the resolution of the controller command?"
This could actually make things worse - but depends on your transfer function if it is a problem. Think about it this way - in the scenario you state the input signal going into the Discrete TF will only change once in every three samples, that means if your transfer function includes a 1-z^(-1) factor (i.e. a derivative) - that will be zero for two samples then jump up for the next sample. You'll observe a very jittery/noisy signal, but the noise is due to samples not being correct. This will also occur if the sample times are very similar but go in and out of sync where you may get the occassional sample that is the same and hence the occassional zero in the TF.
In an application I had we had problems trying to get the data coming into a timed loop and the timed loop itself synchronise, and before it was fixed the control signal was very jittery.
Consultant Control Engineer
www-isc-ltd.com

Getting Errors while setting the Transformation Function

Hello All,
I was trying to attach a Transformation function to existing capture process.
But I am getting ORA-30625 error while I was trying to set my transformation function to one of the
DBA rule_names.
Following are details:
SQL> select rule_name from dba_rules;
RULE_NAME
TEMP1
TEMP3
TEMP5
TEMP7
SQL> DECLARE
2 action_ctx SYS.RE$NV_LIST;
3 ac_name VARCHAR2(30) := 'STREAMS$_TRANSFORM_FUNCTION';
4 BEGIN
5 SELECT RULE_ACTION_CONTEXT
6 INTO action_ctx
7 FROM DBA_RULES R
8 WHERE RULE_OWNER='STRMADMIN' AND RULE_NAME='TEMP1';
9 action_ctx.ADD_PAIR(ac_name,
10 SYS.ANYDATA.CONVERTVARCHAR2('hr.transformation'));
11 DBMS_RULE_ADM.ALTER_RULE(
12 rule_name => 'strmadmin.temp1',
13 action_context => action_ctx);
14 END;
15 /
DECLARE
ERROR at line 1:
ORA-30625: method dispatch on NULL SELF argument is disallowed
ORA-06512: at line 9
Can any body suggest me what to do...
Thanks in advance.
Regards,
Srinivas Jaltaru
( [email protected] )

Hello
I added the line you suggested, Compiling is done successfully, But Capture process
is not invoking the Transformation function that I have assigned to it.
Transformation function I am using is :
create or replace function scott.transformation (in_any IN SYS.AnyData)
RETURN SYS.AnyData
IS
rc NUMBER;
BEGIN
insert into scott.log values ('abc');
return in_any;
end;
1) Any extra initialization parameters are required..?
2) My Streams environment is having only a Capture process for capturing changes. There are no other
components like propagation, apply.
Appreciating your suggestions.
Thanks in advance.
Srinivas Jaltaru
( [email protected] )
Put the following line
action_ctx := SYS.RE$NV_LIST(SYS.RE$NV_ARRAY());
on the line immediately preceding the call to ADD_PAIR.
This should allow the pl/sql function to compile successfully.

How do I properly use the HDR function in Photoshop CS4?

It appears that I must be doing something wrong when attempting to use the HDR capability in Photoshop CS4. I follow the tutorials. I go to File>Automate>Merge to HDR. Then I select the bracketed photos to merge. I have used RAW file combinations of "normal" with +1 and -1 exposures, and "normal" with +2 and -2 exposures. Inevitably the result comes out looking like the most overexposed shot...or even more washed out. Since CS4 normally works for me as intended, I feel that I must be doing something wrong with the HDR function. Can anyone offer any helpful suggestions? Thanks!

Don't feel bad. While I haven't seen just what you're describing, the Merge to HDR function seems, in my opinion, kind of a bust. I can't say I've seen any "magic" at all in the way it combines the exposures.
I've tried to use it several times and I just don't see results that make me feel it's worth using. I have in every case been able to make better images out of a single well-exposed raw file than with the Merge to HDR function and several bracketed exposures (even with CS5's Merge to HDR Pro).
If people offer suggestions here, I'll be trying them too.
-Noel

How do I permanently set the zoom-function, so I will not have to zoom every time I open a new tab/page?

I have recently installed Firefox on my one month old laptop which has a 17" screen. Every time I open Firefox I have to use the zoom-function (ctr +) four times to be able to read comfortably. Every time when I next open a website, or tab, or window I have to use the zoom-function again. This is kind of getting old, fast.
Is there any way I can set the zoom to a higher/closer setting permanently, so I do not have to use the zoom-function about 50 times everytime I use the internet?
If you could help me that would be lovely!
Thanks,
Kikki

You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Where to call the javascript function

Hi,
I am using JSF and ADF.
I have a javascript function called by the body onload.
The javascript is to set the first the first column of a table fixed.
But when I click the next page link which is generated by defaut,
the function from the javascript disappears.
Can I call a javascript function when pressing the next page link which is
generated by default ?
Thanks.
Ivan

Hi Frank,
My javascript function is to make the first column of the table fixed which
is something like the function in the Excel.
The function is called by body onload.
But when the 'next page' link is clicked, it will not refresh the whole page.
The above cannot be called.
So I wanna add it during the action of pressing the link.
any alternatives ?
Ivan

Where to set the Transfer Function in Photoshop CS5?

Similar Messages

Maybe you are looking for