Where to set up Corresponding Integ. Server

Hi
In the SXMB_ADM Tcode in Integration Engine Configuration
for the role of business system -> Integration server i am not able to see any corresponding Integration server..
How we set up the corresponding Integration server in SXMB_ADM
venkat

Hi Venkat,
The integration server is set up in the SLD. To maintain the entry in SXMB_ADM. Role of business system: Integration server.Corresponding Integration server: http://<host>:<port>/sap/xi/engine?type=entry
host is the host name of the integration server and port is the HTTP port.
If you have already maintained this entry in your system landscape description, you can copy the entry as follows: Choose Edit -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration.
Thanks,
Manohar.
P.S: btw did you recognize me!

Similar Messages

Where should I set up my FTP server if I have no money to spend? I would prefer if someone answers this quickly as I want this site up and running soon.

Where should I set up my FTP server if I have no money to spend? I would prefer if someone answers this quickly as I want this site up and running soon.

Ethmoid is right... There ARE free web hosts, but... as the old saying goes "You get what you pay for" and if you pay nothing?
Most free web hosts are riddled with ads, and some are even hosts to malware. DO YOUR RESEARCH before committing to anything.
While some ISP's do provide free hosting, there are limitations with many of them, such as monthly bandwidth and file storage. You may not be able to get your whole site upto the server (depending on how big it is), or it may be down several days a month due to "excessive" traffic. Again - DO YOUR RESEARCH before committing to anything.
There are also a lot of services that run in the range of $4-7 a month for feature filled, bandwidth enabled hosting. Dreamhost is offering two domains for $3.95 a month right now. I use ICDSoft (have since 2003) and they're $7 a month, but they offer a lot for that.
Lastly, you want to look at SUPPORT. If your site goes down, and your "free" host is nowhere to be found.... It's as bad as having no site at all, if you cant get it fixed and no one can access your URL for days on end.

Corresponding Integ. Server Configuration ?

Hi,
As per SAP documentation Corresponding Integ. Server configuration should be either
http://<host>:<port>/sap/xi/engine?type=entry
or
dest://<IntegrationServer-Destination>
In my client PI server they are using
dest://INTEGRATION_DIRECTORY_HMI
which is not correct according to SAP.
My question is would that configuration use by PI if the Role of Business System is Integration ?   Since above configuration mainly for Role of Business Application Server ?
Please advise ?
Thank You and Best Regards
Fernand

Hello,
As Rajesh mentioned above the configuration does not look correct as it is at the moment.
It should look something like this:
XI System:        TRX SXMB_ADMIN -> Integration Engine Configuration
      - Role of Business System:    Integration Server
      - Corresponding IS: http://server:port/sap/xi/engine?type=entry
Business System: TRX SXMB_ADMIN -> Integration Engine Configuration
      - Role of Business System:    Application System
      - Corresponding IS: DEST://<your_sm59_http_destination>
   <your_sm59_http_destination>: This is the RFC Destination pointing to
your XI System, that you have maintained via SM59.
Regards,
Sarah

System Landscape : Corresponding Integration server not maintained

Hi Guys,
In ECC, SXMB_ADM - > Integration Engine Configuration
Edit ->Change Global Configuration data
System Landscape tab...
It shows System Landscape : Corresponding Integration server not maintained
I have maintained the corresponding integration server in the SLD where in the business I created for ECC,
I put the business system that I have created for Integration server
Yet The error persists...any idea?
Regards,
Teja

Hi Guys,
I have done all the setting suggested,,
then came across a thread on the forum
Unable to load Integration Server data from SLD
Regarding the System Landscape button in transaction sxmb_adm -> Integration Engine Configuration,
this button is obsolete and no longer works correctly. You can ignore the error message you get.
Thanks,
Teja

HOW TO: Set up your application server to run BC4J

How To set up your application server to run BC4J.
INTRODUCTION
A running BC4J application is actually the combination of:
* Your own application files
* BC4J runtime libraries
In order to successfully run your BC4J application in local mode, the first requirement is
that your application server contains the necessary BC4J libraries.
This How To describes the steps required to ensure that you have a functional
BC4J runtime environment installed on your application server.
Oracle IAS 1.0.2 and Tomcat 3.1 will be used as examples.
THE BC4J RUNTIME LIBRARIES
Whatever application server you deploy to, the following libraries
are required in the following order to be in the classpath.
BC4J Libraries:
xmlparserv2.jar
jdev-rt.zip
jbojdbcpatch.zip
connectionmanager.zip
jbohtml.zip
jboimdomains.zip
ordim817.zip
ordvir817.zip
ordhttp.zip
jbomt.zip
jbodomorcl.zip
jboremote.zip
jndi.jar
jbodatum12.zip
These libraries can be found in <JDEV_HOME>/lib/
INSTALLING THE LIBRARIES ON IAS:
Installing the libraries is simply a matter of copying them to the
application server's filesystem and adding them to the classpath.
IAS's classpath can be modified by editing the file:
<IAS_HOME>\Apache\Jserv\conf\jserv.properties
In this file you'll find the existing pre-installed BC4J libraries which
looks like this:
wrapper.classpath=<IAS_HOME>\Apache\BC4J\lib\ordvir817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\lib\ordim817.zip
etc.
Note! These BC4J libraries correspond to JDeveloper 3.1.1.
In order to run JDev 3.2 based applications you will have to update these libraries
to JDeveloper 3.2 production.
Steps:
1. Copy (or FTP) the JDev 3.2 BC4J libraries from <JDEV_HOME>\lib to a NEW directory on the
appserver's filesystem called:
<IAS_HOME>\Apache\BC4J\newlib
2. Modify the classpath by editing <IAS_HOME>\Apache\Jserv\conf\jserv.properties.
Example: (modified classpath entries)
# New 3.2 BC4J Runtime libraries
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\xmlparserv2.jar
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jdev-rt.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbojdbcpatch.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\connectionmanager.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbohtml.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jboimdomains.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordim817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordvir817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordhttp.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbomt.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbodomorcl.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jboremote.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jndi.jar
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbodatum12.zip
Note: Make sure to remove or comment out the existing 3.1.1 BC4J library entries!
To see the changes, you must restart IAS and that's it, your IAS will be updated with
the JDev 3.2 BC4J libraries which allow you to run BC4J Data Tags among other
things!
INSTALLING THE LIBRARIES ON TOMCAT
As before, this process involves both the copying of the libraries
and modifying the classpath.
After copying the BC4J libraries to a path accessible from Tomcat,
you can modify Tomcat's classpath by editing it's startup script:
<TOMCAT_HOME>\bin\tomcat.bat (NT)
<TOMCAT_HOME>\bin\tomcat.sh (Unix)
Here is a portion of a modified tomcat.bat (on NT)
rem Add BC4J libraries
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\xmlparserv2.jar
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jdev-rt.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbojdbcpatch.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\connectionmanager.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbohtml.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jboimdomains.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\or dim817.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\ordvir817.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\ordhttp.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbomt.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbodomorcl.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jboremote.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jndi.jar
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbodatum12.zip
rem Add Oracle JDBC library
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\classes12.zip
Note: I also added the Oracle JDBC library since Tomcat does not have it.
It is found at:
<JDEV_HOME>\jdbc\lib\oracle8.1.7\classes12.zip
And That's It!
When Tomcat is restarted using this script, the necessary BC4J libraries
will be in the classpath..
A follow up How To:"How To Deploy a BC4J JSP Application on IAS and Tomcat"
will be posted shortly!

I copied the following files in jserv classpath
bc4jct.jar
bc4jctejb.jar
bc4jdomorcl.jar
bc4jhtml.jar
bc4jimdomains.jar
bc4jmt.jar
bc4jmtejb.jar
bc4juixtags.jar
collections.jar
datatags.jar
jdev-cm.jar
regexp.jar
share.jar
uix2.jar
cabo.war
classes12.jar
nls_charset12.jar
ordim.jar
ordhttp.jar
runtime12.jar
jdev-rt.jar
xmlparserv2.jar
bc4j_jclient_common.jar
webapp.war
I got this list from Jdev 9031 on-line help
I also copied the new DataTags.tld file to /webapp directory
When i run my jsp page i get this error..
java.lang.NoClassDefFoundError: java/util/TimerTask
     at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:693)
     at oracle.jbo.html.jsp.datatags.ApplicationModuleTag.doStartTag(ApplicationModuleTag.java:148)
     at jspapp.odrjsp__html._menu._jspService(Compiled Code)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(Compiled Code)
     at oracle.jsp.JspServlet.doDispatch(Compiled Code)
     at oracle.jsp.JspServlet.internalService(Compiled Code)
     at oracle.jsp.JspServlet.service(Compiled Code)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at oracle.portal.provider.v1.http.JspRenderer.renderBody(JspRenderer.java:116)
     at oracle.portal.provider.v1.RenderManager.render(RenderManager.java:164)
     at oracle.portal.provider.v1.http.ServletProviderResponse.showPortlet(Compiled Code)
     at oracle.portal.provider.v1.http.HttpProvider.dispatchProviderAction(Compiled Code)
     at oracle.portal.provider.v1.http.HttpProvider.service(Compiled Code)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at org.apache.jserv.JServConnection.processRequest(Compiled Code)
     at org.apache.jserv.JServConnection.run(Compiled Code)
     at java.lang.Thread.run(Compiled Code)
In the JDK 1.3 APi docs, i found that TimerTask was introduced only in JDK 1.3
Does this mean that BC4J (in jdev 9031) will only work
with JDK 1.3 or later?
Thanks for your time.
Harish

How to set up a mail server with a private DNS and relay over a public mail

How to set up the mail server that we can send and pick up emails inside and outside?
Our private network has the DNS name dnsname1.private.
We have our privat DNS Server and he can forward requests to outside over our router.
Our public emails are hosted by an internet provider. This dns name is dnsname2.com and dnsname2.org.
How we have to set up our mail server that we can pick up our emails from our public dnsname2.com?
And when we write an email how we have to set up it that the dnsname is dansname2.com and not dnsname1.private?

If you want to move your mailservice to your own (internal) server, start by making sure you can recieve traffic on port TCP 25 (SMTP). Some ISPs blocks this port, especially on "non business" connections.
Can you send mail from your LAN directly to where your mail is hosted using port 25 TCP or do you have to relay via your ISP?
You have a static public IP?

Problems setting up an NFS server

Hi everybody,
I just completed my first arch install. :-)
I have a desktop and a laptop, and I installed Arch on the desktop (the laptop runs Ubuntu 9.10). I had a few difficulties here and there, but I now have the system up and running, and I'm very happy.
I have a problem setting up an NFS server. With Ubuntu everything was working, so I'm assuming that the Ubuntu machine (client) is set-up correctly. I'm trying to troubleshoot the arch box (server) now.
I followed this wiki article: http://wiki.archlinux.org/index.php/Nfs
Now, I have these problems:
- when I start the daemons, I get:
[root@myhost ~]# /etc/rc.d/rpcbind start
:: Starting rpcbind [FAIL]
[root@myhost ~]# /etc/rc.d/nfs-common start
:: Starting rpc.statd daemon [FAIL]
[root@myhost ~]# /etc/rc.d/nfs-server start
:: Mounting nfsd filesystem [DONE]
:: Exporting all directories [BUSY] exportfs: /etc/exports [3]: Neither 'subtree_check' or 'no_subtree_check' specified for export "192.168.1.1/24:/home".
Assuming default behaviour ('no_subtree_check').
NOTE: this default has changed since nfs-utils version 1.0.x
[DONE]
:: Starting rpc.nfsd daemon [FAIL]
- If I mount the share on the client with "sudo mount 192.168.1.20:/home /media/desktop", IT IS mounted but I can't browse it because I have no privileges to access the home directory for the user.
my /etc/exports looks like this:
# /etc/exports: the access control list for filesystems which may be exported
# to NFS clients. See exports(5).
/home 192.168.1.1/24(rw,sync,all_squash,anonuid=99,anongid=99))
/etc/conf.d/nfs-common.conf:
# Parameters to be passed to nfs-common (nfs clients & server) init script.
# If you do not set values for the NEED_ options, they will be attempted
# autodetected; this should be sufficient for most people. Valid alternatives
# for the NEED_ options are "yes" and "no".
# Do you want to start the statd daemon? It is not needed for NFSv4.
NEED_STATD=
# Options to pass to rpc.statd.
# See rpc.statd(8) for more details.
# N.B. statd normally runs on both client and server, and run-time
# options should be specified accordingly. Specifically, the Arch
# NFS init scripts require the --no-notify flag on the server,
# but not on the client e.g.
# STATD_OPTS="--no-notify -p 32765 -o 32766" -> server
# STATD_OPTS="-p 32765 -o 32766" -> client
STATD_OPTS="--no-notify"
# Options to pass to sm-notify
# e.g. SMNOTIFY_OPTS="-p 32764"
SMNOTIFY_OPTS=""
# Do you want to start the idmapd daemon? It is only needed for NFSv4.
NEED_IDMAPD=
# Options to pass to rpc.idmapd.
# See rpc.idmapd(8) for more details.
IDMAPD_OPTS=
# Do you want to start the gssd daemon? It is required for Kerberos mounts.
NEED_GSSD=
# Options to pass to rpc.gssd.
# See rpc.gssd(8) for more details.
GSSD_OPTS=
# Where to mount rpc_pipefs filesystem; the default is "/var/lib/nfs/rpc_pipefs".
PIPEFS_MOUNTPOINT=
# Options used to mount rpc_pipefs filesystem; the default is "defaults".
PIPEFS_MOUNTOPTS=
/etc/hosts.allow:
nfsd: 192.168.1.0/255.255.255.0
rpcbind: 192.168.1.0/255.255.255.0
mountd: 192.168.1.0/255.255.255.0
Any help would be very appreciated!

Thanks, I finally got it working.
I realized that even though both machines had the same group, my Ubuntu machine (client) group has GID 1000, while the Arch one has GID 1001. I created a group that has GID 1001 on the client, and now everything is working.
I'm wondering why my Arch username and group both have 1001 rather than 1000 (which I suppose would be the default number for the first user created).
Anyway, thanks again for your inputs.

Failed to set security on SQL Server registry key. Error: 2

Hi,
I have a Primary site (mixed mode) running SCCM 2007 SP1 for many months now with no issues.
This site is made up of two Win 2008 sp2 servers sharing the SCCM roles:-
SCCM01 - Site server, DP, RP, PXE and SQL2005 hosting the SCCM database
SCCM02 – SUP, MP, FSP, SLP
The SQL2005 on SCCM01 is running under a domain service account called
domain\service_sccm which is also a sysadmin in SQL as is the SCCM02 server.
In an effort to resolve the isse I have made this account a Domain Admin.
I have also used this account to log onto SEC01 to run the Secondary Site installation and to be the SQL Service account.
I'm now trying to add a Secondary Site on a Domain Controller called SEC01 (also Win2008 sp2) and on the same LAN as the SCCM01/02.
This is where I get problems.
I run the installation locally on the Sec Site server (DC) as a Domain Admin and the installation completes OK (all green ticks),
the ComponentSetup.log and Pre-Reqs are all good as well however when I check the ConfigMgrSetup.log I see the below -
Failed to set security on SQL Server registry key. Error: 2.
<11-09-2010 22:46:59> SMS Setup full version is 4.00.6221.1000
<11-09-2010 22:46:59> Successfully set security on Setup registry key.
<11-09-2010 22:46:59> Failed to set security on SQL Server registry key. Error: 2
<11-09-2010 22:46:59> Successfully set security on Identification registry key.
<11-09-2010 22:46:59> Creating SMS Inbox Source registry key ...
<11-09-2010 22:46:59> Installing SMS Site Component Manager ...
<11-09-2010 22:46:59> Installing Site Component Manager under acct <NT AUTHORITY\SYSTEM> path <C:\Program Files (x86)\Microsoft
Configuration Manager\bin\i386\sitecomp.exe>
<11-09-2010 22:47:01> Started Site Component Manager service
<11-09-2010 22:47:01> SMS Site Component Manager installation completed.
<11-09-2010 22:47:01> Done with service installation
Adding the PMP role to SEC01 also fails to install and no MPSetup or MPControl logs are created.
WebDav and win2008 roles, features all added and server fully patched.
Despooler.log on SCCM01 seems good and passing keys.
Tried installing to default path and to shortened path such as C:\SCCM
The new secondary site is listed in the console and an address can be added for the Secondary Site
BITS Server Extensions and Remote Differential Compression Features are enabled.
The Group memberships all appear ok:-
SCCM01
Local Admins
contains the sec site server SEC01, SCCM01, installation accounts
SMS_SiteToSiteConnection_001
SEC01 (the sec site server)
SMS_SiteSystemToSiteServerConnection_001
SCCM02
SEC01
No Local Admins as a DC
SMS_SiteToSiteConnection_002
SCCM01
SMS_SiteSystemToSiteServerConnection_002
empty
SQL 2005
This has the account logged in during installation as a sysadmin
SCCM02 is also sysadmin
The fundamental issue appears to be that the SEC01$ server account is not being added to SQL Logins (and therefore SCCM database Roles)
therefore the installation cannot complete.
I have tried to manually add the SEC01 account to SQL Logins before installation of Sec Site but this did not work.
Not sure if the fact that SEC01 is a DC may be a factor.
Appreciate any help if anyone has seen this before or can suggest a resolution.
Thanks

After a lot of digging around and head scratching I eventually found the resolution.
The original thread title Error turned out to be a bit of a red herring in that my failure to deploy Sec Sites came down to two separate issues seemingly unrelated to the error message of the thread title.
The first part of the resolution was to manually create the SQL Server accounts for the Sec Site Servers and assign them to the smsdbrole_MP DB role to
let the SQL side of the SCCM install complete a s these were not being created automatically.
This then left the fact that that the installation of the Sec Site completed successfully according to the install logs in C:\ however the DP and MP would
never install.
The big clue was eventually contained in the mpfdm.log errors relating to
**ERROR: Cannot find path for destination inbox SMS_AMT_PROXY_COMPONENT on server REGISTRY SMS_MP_FILE_DISPATCH_MANAGER
and
**ERROR: Cannot find path for destination inbox Asset Intelligence KB Manager on server REGISTRY SMS_MP_FILE_DISPATCH_MANAGER
Thankfully the errors led me to these two blogs:
http://myitforum.com/cs2/blogs/scassells/archive/2009/07/20/error-cannot-find-path-for-destination-inbox-sms-amt-proxy-component-on-server-registry.aspx
and
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/5fcc53d4-8629-4b34-9eaa-6cb020eedc13/
As it turned out the SCCM installation registry and folder creation does not complete and I had to manually enter the reg settings as detailed in the
links above to complete the installation. Once I did as described everything worked a treat – all my MPs and DPs are 100% now.
Solutions
Add the following reg keys to each of your effected secondary sites.
Inbox Fix
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\MPFDM\Inboxes]
"Asset Intelligence KB Manager"="E:\\Program Files\\Microsoft Configuration Manager\\inboxes\\AIKbMgr.box"
"SMS_AMT_PROXY_COMPONENT"="E:\\Program Files\\Microsoft Configuration Manager\\inboxes\\amtproxy.box"
Asset Intelligence fix:
Note: you will need to identify the next largest key value.
In my example it was key 49
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Inbox Source\Inbox Definitions\49]
"Inbox Name"="Asset Intelligence KB Manager"
"Relative Path"="inboxes\\AIKbMgr.box"
"NAL Path"=""
"User Rights"=dword:00000000
"Service Rights"=dword:00000004
"Monitoring Enabled"=dword:00000001
"Location Type"=dword:00000001
"Guest Rights"=dword:00000001
AMT registry Fix.
  Note: you will need to identify the next largest key value.
In my example it was key 50
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Inbox Source\Inbox Definitions\50]
"Inbox Name"="SMS_AMT_PROXY_COMPONENT"
"Relative Path"="inboxes\\amtproxy.box"
"NAL Path"=""
"User Rights"=dword:00000000
"Service Rights"=dword:00000004
"Monitoring Enabled"=dword:00000001
"Location Type"=dword:00000001
"Guest Rights"=dword:00000001
Big thanks to Shaun Cassells and John Marcum for these blogs

Is it possible to have different authentication mode for SQL Server Database Engine and corresponding SQL Server instance?

Hi,
I have installed the x64 SQL Server 2008 R2 Express with default settings and run MBSA 2.3 (using default settings too). It shows three SQL Server instances: MSSQL10_50.SQLEXPRESS, SQLEXPRESS and SQLEXPRESS (32-bit). For the first, authentication
mode is Windows, for the rest two - mixed. Here https://social.msdn.microsoft.com/Forums/sqlserver/en-US/03e470dc-874d-476d-849b-c805acf5b24d/sql-mbsa-question-on-folder-permission?forum=sqlsecurity question
about such multiple instances was asked and the answer is that "MSSQL10.TEST_DB
is the instance ID for the SQL Server Database Engine of the instance, TEST_DB", so in my case, it seems that MSSQL10_50.SQLEXPRESS is the instance ID for SQL Server Database Engine of the SQLEXPRESS instance.
I have two questions:
1) How can it be that SQL Server DB Engine instance has different authentication mode than corresponding SQL Server Instance?
2) Why 32-bit instance reported although I installed only 64-bit version?
Also, this https://social.technet.microsoft.com/Forums/security/en-US/6b12c019-eaf0-402c-ab40-51d31dce968f/mbsa-23-reporting-sql-32bt-instance-is-running-in-mixed-mode-when-it-is-set-to-integrated?forum=MBSA question seems to be related to this
issue, but there is no answer :(.
Upd: Tried on clean Windows 8 installation and Windows 7 with the same result.

Because I DO NOT want the three people who will be having access to the production SQL Server to also have access to the primary host ProductionA. Since I have to allow them to RDC into the box to manage the SQL Server, I figure why not create
a separate VM for each one of them and they can RDC into those instead.
Does this make any sense?
Any tips are greatly appreciated. The main reason for doing this is because the three people who will be accessing the box, I need to isolate each one of them and at the same time keep them off of the primary ProductionA.
Thanks for your help.
M
Hello M,
Since you dont want the 3 guys to have access to Production machine A.You can install SQL Server client .By client i mean SQL server management studio(SSMS) on there local desktop and then create login for them in SQL Server.Open port on which your SQL server
is running for three of the machines so that they can connct.Now with SSMS installed on each machine each can connect to SQL server from there own machine.
I would also like you to be cautious with giving Sysadmin privilege to all three of them ,first please note down what task they would do and then decide what rights to be provided.
Your option will also work but you need to create 3 VM for that .Which is more tedious task.
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Setting up a mail server on a 2010 MacMini Server

Hi,
I am having great difficulty in setting up my Mail server on my 2010 MM server.   Setup is as follows:
1. Domain name hosted by dyndns.org with mail forwarding setup to forward incoming mail to my mail address <[email protected]>
2. Outgoing mail is being sent from the server via my local ISP using their relay server
3. Mail Server settings in Server app shown as "Provide mail for: mail.domainname.org"
4. Authentication set to: "Relay outgoing mail through ISP"
5. dyndns.com confirm that the domain host side is set up correctly.
6. Local ISP confirms that local relay service is set up correctly.
Problem is Mail account cannot be activated in Apple Mail.    email setup details in my server Mail app are as follows:
     Account Type:    POP
     Email address:   [email protected]
     Full Name:         my name
     Incoming Mail Server:   mail.domainname.org
      User Name:      admin
      Password:        password on the dynsdyn.com srever
      Outgoing Mail Server (SMTP):   Local ISP providers mail relay service
Has anyone any idea where this setup is wrong?   Also, I am unable to find a server manual for OSX 10.8.4 server. Does anyone know where I can get this?
Any help you can give is most appreciated.
Thank in advance
Roger

Hi Linc,
For the email address on the server, I create the account in my Apple mail in the normal way. I fill in the details shown on the accounts setup panel as shown in my original post above. I then click on the "Enable this account" button but it does not connect to anywhere.
For the Server setup, this is also described in points 3. and 4. above.
The result is that the server seems to be setup properly but this may not be the case, which is why I asked my questions.
Sorry I cannot be more explicit but if you are willing to ask deeper questions that might point to the problem, I would be more that delighted to supply the answers if I can.

Setting Up the File Server Dynamically

I have a scenario wherin i have to set up the FTP server name and directory where i have to put the final file dymically.
I was able to set the directory path dynamically using Adapter Specific Message properties.
Can somebody suggest me if i can set the server name also by module processor (have not written one till now)or some other way. The steps to follow etc
Waiting for your useful answers.

Hi Siva,
Setting up a Server name Dynamically -I don't think so it is possible with this point of time.
So try to do in Java Proxy if required.
Receiver File Adapter - Dynamic FTP Server Address
Hope this helps,
Regards,
Moorthy

Where can i get the report server name in Reports 10g

Where can i get my report server name in 10G ?

Thanks ..
When i opened the bat file :
i did not find any report server name ...
This is my file :-
@echo off
REM $Header: rwdiag.bat 13-may-2005.03:21:21 sunaraya Exp $
REM
REM rwdiag.bat
REM
REM Copyright (c) 2005, Oracle. All rights reserved.
REM
REM NAME
REM rwdiag.bat - rw diagnostic tool
REM
REM DESCRIPTION
REM Script to run the diagnostic tool used to locate servers / monitor packets on the network
REM
REM NOTES
REM Usage: rwdiag.bat -find <server name> | -findAll [-conf <config file>] [-timeout <timeout in sec>]
REM
REM Usage: rwdiag.bat -monitor [-log <logfile>] [-conf <config file>]
REM
REM MODIFIED (MM/DD/YY)
REM sunaraya 05/13/05 - Added rwrun.jar to the classpath for bug 4361664
REM sunaraya 04/22/05 - Provided execute permission to the script for bug 4323789
REM sunaraya 04/14/05 - sunaraya_bug-4221172
REM sunaraya 04/14/05 - Creation
REM
set ORA_HOME=C:\ORANT
if "%ORA_HOME%"=="" goto ERROR
set CLASSPATH=%ORAHOME%\jlib\zrclient.jar;%ORA_HOME%\reports\jlib\rwrun.jar
%ORA_HOME%\jdk\bin\java -DORACLE_HOME=%ORA_HOME% -classpath %_CLASSPATH% oracle.reports.utility.DiagServerLocator %*
goto END
:ERROR
echo "ORACLE_HOME is not set"
echo.
:END

How to display MICR font in XMLP where APPS is running on WINDOWS Server?

Hi,
I'm working on check printing reports with XMLP. In the output I need to print the check number in the last line of the page in MICR fonts. To do this I have followed the below steps...
1. Installed the font (MICRe13b5.ttf) in local machine.
2. Also placed this font in "\apps\ued02\applmgr\common\util\java\1.4\j2sdk1.4.2_04\lib\fonts" folder on the WINDOWS 2003 SERVER.
3. We placed "xdo.cfg" in "\apps\ued02\applmgr\common\util\java\1.4\j2sdk1.4.2_04\lib\fonts" and "\apps\ued02\applmgr\common\util\java\1.4\j2sdk1.4.2_04\lib" folders.
We made an entry for the MICR font in the xdo.cfg file.
When we run the report it's showing the MICR Line in NORMAL FONT (ARIAL).
Can someone help me how to display the MICR fonts where Oracle Apps running on WINDOWS server?

The xdo.cfg contains below info.
<config version="1.0.0" xmlns="http://xmlns.oracle.com/oxp/config/">

<fonts>
<font family="MICRe13b" style="normal" weight="normal">
<truetype path="\apps\ued02\applmgr\common\util\java\1.4\j2sdk1.4.2_04\jre\lib\fonts\MICRe13b5.ttf"/>
</font>
</fonts>
</config>

I've set up the *&*%$ testing server - now can I please add a recordset?

I run into this problem occasionally with DW. I set up an asp
site using aspVBscript. When I go to add server behaviors the
application box has the first two item s ticked (Create a site for
this file, and Choose a document type) but the third, "Set up the
site's testing server" is not, yet I have set up the testing server
(several times). It is the same testing server settings I use on
several of my other sites and they are fine. Why could DW be
insisting I have not set this up? I've tried closing down the app
and restarting, but it still thinks I have not entered the testing
server settings for the site and so won't let me add server
behaviors.
Anybody have any ideas why this is happening and what I could
do to fix?
BTW i'm using Dreamweaver CS3 on a windows XP pro SP2
machine. Windows 2003 IIS 6.0 server is where the site
resides.

What happens when you browse to
http://localhost?
What happens when you browse to your site prefix as specified
in the testing
server setup?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"murrayneill" <[email protected]> wrote in
message
news:fot33f$ql3$[email protected]..
>I run into this problem occasionally with DW. I set up an
asp site using
> aspVBscript. When I go to add server behaviors the
application box has the
> first two item s ticked (Create a site for this file,
and Choose a
> document
> type) but the third, "Set up the site's testing server"
is not, yet I have
> set
> up the testing server (several times). It is the same
testing server
> settings I
> use on several of my other sites and they are fine. Why
could DW be
> insisting I
> have not set this up? I've tried closing down the app
and restarting, but
> it
> still thinks I have not entered the testing server
settings for the site
> and so
> won't let me add server behaviors.
>
> Anybody have any ideas why this is happening and what I
could do to fix?
>

Timeout setting in setup package server

Hi All,
We wanted to change the time out setting in our Middleware server(Windows platform wintel) from present 120 mins to 180 mins which is used for creation of setup package.Where we can change the timeout setting in server.Please give me the path or location ..
Thanks in advance
Devendra

Hi,
I am not sure about the native Jboss JTA, but in general the following is true:
-the transaction timeout determines when 'pending' transactions are cleaned up by the JTA
-the larger the value, the longer the time that such transactions can be around
The performance impact depends on the particularities of your application and server environment; to name a few:
-For hot-spot data in your database, transactions will normally have to wait longer to get locks held by other transactions. If the timeout is too short then the clients will see many requests fail because the underlying transaction will timeout before the locks are gotten, and the JTA will rollback.
-On the other hand, if (for some reason) you have failing requests that leave active transactions floating in the server, then a larger timeout will mean that such floating transactions will not release their locks yet (happens at rollback/commit only). So here a larger timeout means that lost transactions (that will rollback anyway) will prevent other transactions from doing business.
-The same argument holds for deadlocks. If a transaction is involved in a deadlock situation then the deadlock will not be resolved until the transaction rolls back after timeout. In this case too, the other transactions are hindered by the locks of a 'lost' transaction.
As a rule of thumb, I would say: keep transaction timeout as high as necessary to allow most transactions to get 'useful' locks (but not much higher than that). For instance, you could measure the statistics on response times under realistic loads and base your timeout value on that (if you're not measuring the deadlocks of course).
Best,
Guy
http://www.atomikos-support.com:8080/forums -- Java/J2EE/JTA Transactions Forum

Where to set up Corresponding Integ. Server

Similar Messages

Maybe you are looking for