Where to set up percentage for SPL?

Hi Folks,
I have read there should be a possibility to set up the percentage for SPL.
Can you tell me where I can find this settings?
Thanks
Regards
Dieter

Hi Dieter,
now it gets a little bit tricky. The settings you described are the default settings from SAP which are not wrong but perhaps not the best. If you check your business partners against your Sanction Party List and you will probably have a lots of unnecessarily blocks. Now its your task to get a feeling for the settings especially for the N1 Name entry to get a reasonable result after checking your BPs
There is no recommended figure for the percentage cause its differs from company to company.
Talk with the responsible person of this division and I`m sure togehter you wil find an appropriate solution.
If there are more question don`t hesitate and ask.
Have a nice day
Daniel Sappok

Similar Messages

I wander where to set import job for transports

I wander where to set import job for transports to be imported automatically. On transport domain controller I can not manage other job than the one for the system itself.
On the system which is not transport domain controler I have only display function

are you asking for 'automatic import' in QAS/PRD ?
When you go to STMS import queue in a particular system like QAS, there you can see a button 'import all'. This will enable to you schedule automatic import periodically in intervals for eg. 15 min or whatever you want.
just click on import all and it will ask for inputs and schedule
OR, do you want to confirm for RDDIMPDP job ?
Run report RDDNEWPP to schedule RDDIMPDP
Edit: Note 11677 - Transports with event-controlled RDDIMPDP

Where to set payment method for automatic payment F110 ?

hello everyone
I need some help.
user want to use payment method M(manual check) to pay by automatic payment F110.
but when use f110 no transaction for that vendor (that vendor using manual check).
where to config payment method for automatic payment F110

hello everyone
Hi ,
APP program runs- on payment method please make setting for your payment method "M" in FBZP.
Like Payment method for Country (OBVCU) & company code (OBVU)
Make sure that you have assigned payment method (M) bank ranking & subaccount.
Assign the payment method to vendor master data & invoice.
After that check the invoice comes under your payment dates
Hope after that if you run F110 picks up the open items
Thank you
Anil

Where we set update/insert for mapping in OWB

Hi, I have got a mapping to load data into cube from source transaction tables. where exactly I need to set (in mapping) lodaing tape, insert/update.
Could you please send me the flow in tool like mapping --> configure etc...
Thanks much..
Srini.

thanks to all for your suggestions.
After selecting the cube and if you see the Load Type in operator properties, it has onlyLOAD/REMOVE options.
The other way I found to update the cube values is, mapping -> configure -> Runtime Parameter -> Default Operating Mode ... it should be selected as "Row based".
Why I need to update cube is, if I add a column to cube and want to update that column alone for all the rows with a transformation rule from source.
Thanks,
Srini.

Where to set the classpath for custom classes in jsp

Hi,
we have created our custom classes in and ported in contentDB and that classes are internally using some jar files. Previously we have set the classpath of all the jar files provided in CDB devkit in the orion-web.xml but if are opening the explorer.jsp or any other jspx of contentDB we are getting the classcastexception and page is not opening.
Is there any problem in setting the classpath. Please if any one knows abt this, reply as soon as possible.
thanks,
swapna soni.

I think it is Oracle 10g Release 2... since when I click the top OAS link in the Enterprise Manager Console, it took me to 'Enterprise Manager 10g Grid Control Release 2' this page.
And...10g Application Server Control Release 10.1.2.0.1, I think 2.0.1 means Release 2.
Thanks and let me know if you need something else.

No Battery Percentage for iPhone 3G

Where is the Battery Percentage for iPhone 3G?

It's not there. It's for iPhone 3G S only. http://www.apple.com/iphone/how-to/#settings.usage
Evidently, the battery management circuitry has been completely reworked to get a big improvement from a battery with only a slightly larger capacity. http://www.apple.com/iphone/compare-iphones/

TabStripLayout-View: Where to set the text?

Hello,
I am using a view of the kind TabStrip. For your understanding> Not a normal view with a tabstrip. It is a view similar to Gridlayout, just TabStripLayout.
I can not find where to set the text for the individual tabs, e.g. TAB1, TAB2 etc.
Does anzbodz know?
Regards Thank Mario

I assume you are using a TabStrip layout of a viewset. The tab 'captions' are set in the properties for the viewset. In the explorer outline, expand Windows and click on the ViewSet and in the properties for the ViewSet it will have the captions listed for the tabs and you can change the text there.
Be aware that the tab strip layout for viewsets is a bit limited. As far as I can tell the navigation plugs between views do not work. There are other forum questions/answers on how to use a normal TabStrip element rather than a viewset to get around this.
-Cindy

Missing Functionality -where do I set a budget for a Project?

Budgeting for Projects is non - existent
Budget for Profit and Loss for a particular project , How is it done ?
Does not work , No facility to put in Budget for a project ?
The report I am trying to run is:
REPORTS>FINANCIAL>BUDGET REPORTS>Profit and Loss Statement Budget Report.Then go to Expanded and choose a PROJECT, say MailOrder.
The result is that it will show the MailOrder project for the ACTUAL but it will show the whole company Turnover against the BUDGET column.
This is because there is no place to set a budget for MailOrder Project in the first place. So the question is where do I set a budget for a Project?
1 Budget setup screen - this has no facility to setup a budget for a PROJECT
2.Budget Profit and Loss - this has the facility to run a PROJECT budget but the figures for the Budget cannot be right because they were not setup in the first place.
PS MailOrder project is just an example.
Version: SAP BUSINESS ONE 2007 A Patch Level 41
Description of requirements: As above
(Valid as of: (Date that this legal requirement is applicable) N/A
Business needs: Customer cannot set the budget for a project and this effects their accounting.
Examples: (Please describe a typical example, how the functionality should work.)
Current Workaround: None.
Proposed solution: Create a Project and then be able to set a Budget for it
Edited by: Darpal Thiarha on May 14, 2008 10:34 AM

Hi Darpal/Kerstin
Please ignore my previous replies because I have now worked out why this idea will not work:
Kerstins' idea is based on setting up new Nominal Codes for every Project and for Every Nominal Code in the Profit and Loss structure. Apart from the fact that this will create a messy Nominal Structure with hundreds of Nominal Codes, the main issue here is the way the Cost Of Goods Sold is structured. The logic of our Nominal Structure for Sales and Cost of Goods is based on Item/Item Groups and the Nature of these Items. In our case we sell Skin Care products under 3 Brands. Say Brand A, B and C
So Brand A is summarised into one item Group and the ITEM GROUP is coded to Sales Nominal 20000 and the Cost of this group is coded to Nominal 30000. In Kertins suggestion, I would need to raise a Nominal Code 20001 for say Project Mail Order and 30001 for the Cost of Goods for Mail Order but this the Mail Order project is selling ALL our brands (A,B,C) - so you can see the problem here. You cannot use Nominal Codes for two different purposes and make it work. So the problem here is that my BRAND A summary will contain a Nominal with a Project Mail Order, that has SALES of Brand A,B,C. The Net effect will be that we will not be able to summarise anything in SALES and Cost of SALES in a logical way (Neither by Brand or By Project) and the Nominal Structure will be a mess.
My conclusion is that SAP b1 Sales and Cost of Goods section demands certain logic when building the Nominal Codes, and this is based on the NATURE OF THE STOCK ITEM and trying to superimpose the PROJECT issue into this, will never work. In my view, the PROJECT issue needs to be sorted without involving New Nominal codes and the starting point would be in sorting out the SALES and COST of SALES and the project Budget for this.
Please let me know if you need further illustration of the problem.

Where do I set up rules for conflict resolution when syncing iTunes with Outlook?

I just got an iPhone 5 and I'm coming from a Blackberry. I've been syncing Outlook Calendar and Contacts to a portable device for over 10 years, even back in the day of the pocket pc and more recently the Blackberry. My iPhone 5 syncs great and seemlessly with Outlook using iTunes. I've had no issues as of yet. The problem for me is, it just seems "too" easy. I didn't see anywhere where I could set rules for conflict resolutions. For example, if your pc says one thing but your iPhone says another, who wins and supercedes the other? What if by accident your iPhone loses all of its data, then iTunes syncs with your pc - will it delete all the Outlook data on your pc because it thinks it's syncing with updated data from your iPhone? (in my case data I've had for over 10 years)
With the Blackberry software it asked you to set up rules for conflict resolution when first connecting the phone (including an option to ask you first). In my case, I chose to have it ask me whenever it discovered a conflict. So whenever I synced, it specifically alerted me exactly how many items are being synced, and then if there were any conflicts, it'd stop and then ask me which device I want to supercede the other. This gave me a lot of piece of mind. Now after getting my iPhone and using iTunes to sync, it's been great so far but I have to say that I don't have as much piece of mind. Does anyone have any feedback on how to set up conflict resolution with iTunes and Outlook or does it not exist at all? Again, what would happen if there was a conflict between the two devices?

Yes! Thankyou for that. I had of course put the context.xml file in the web-inf directory.
I followed your example to the letter and it still wouldn't work. Or rather, I followed to the letter expect for the difference between "WEB" and "META".
Once I worked that out, it started working like a dream.
Note to anyone else who has a similar problem, make sure you REALLY look at the answer given. Make sure you REALLY do have all the files in the suggested places. It will save you time.
Thanks again.

[svn:osmf:] 14823: Fix bug where canPause was not set to false for live streams.

Revision: 14823
Revision: 14823
Author:   [email protected]
Date:     2010-03-17 10:51:40 -0700 (Wed, 17 Mar 2010)
Log Message:
Fix bug where canPause was not set to false for live streams.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/net/NetStreamPlayTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/elements/TestVideoElement.as

Thanks for looking at this post. We have resolved the issue for ourselves by working with our DBAs to narrow down where the problem actually started. We found that the particular SQL we were looking at was not the issue. In a chart on a subsequent page (via a click through), we were actually running into where apex was starting to consuming memory but we were catching it later.
What we found was that when we had a chart query that was SQL containing a pipeline function, the memory usage went up. And within 10 minutes, the server would crawl to a halt. To release the memory, the DBAs would have to bounce the Apex instance. When I changed the query to be a function returning SQL, the problem stopped. I don't know what the correlation was between SQL and moving to a PL/SQL function returning SQL.
I am not even 100% positive of the pipeline function being the cause. I only know that this started happening about the same time as when I implemented the pipeline function. I understand you are leery of a one-second function/query running up that kind of utilization. No one here believed me either (including me really). We figured it HAD to be a coincidence. But once I changed the query from SQL to a function returning PL/SQL, our problem went away.
Thanks to all who looked at and thought about this.
Walter

How to burn a video produced in iMovie in iDVD: with gratitude for the advice received I used the "professional quality" setting in iDVD for a video which in iMovie is 1h 20min long. however this also failled. where did I go wrong, please?

how to burn a video produced in iMovie in iDVD: with gratitude for the advice received I used the "professional quality" setting in iDVD for a video which in iMovie is 1h 20min long. however this also failled. where did I go wrong, please?
the message sked me to alter the quality of the DVD as the content was too large for the quality sellected.
PLEASE HELP again,
THANK YOU VERY MUCH
MIchael

Check the Advanced ➙ Project Information menu option to make sure the playing time of the entire project, movie plus menu is below the 120 minute limit.
OT

Where to set Java system parameter for embedded WLS in JDev 11g?

Hi,
I am trying to test web service invocation via JAX-WS proxy generation on Jdeveloper 11g.
When I test client code, I got following error message.
Exception in thread "main" java.lang.Error: Jaxrpc 1.1 method is not supported.
at weblogic.webservice.core.rpc.ServiceFactoryImpl.loadService(ServiceFactoryImpl.java:65)
From a forum discussion, it was suggested to add following java parameter in the path.
-Ddebug=true -Djavax.xml.rpc.ServiceFactory=oracle.j2ee.ws.client.ServiceFactoryImpl -Djavax.xml.soap.SOAPConnectionFactory=oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnectionFactory -Djavax.xml.soap.SOAPFactory=oracle.j2ee.ws.saaj.soap.SOAPFactoryImpl-Dweblogic.log.Log4jLoggingEnabled=true -Djbo.debugoutput=console
I can not find where to set this parameter under "Tools"->"Preferences". Is there any place in IDE that I can set this value?
Thanks for the help,
Jim

The parameters are defined in the Run configuration of your application. You find the Run configuration in the project properties under run. Open the 'Default' configuration, there you find the java properties where you put the parameters.
Timo

Where do I download drivers for airport extreme.....my iPad can not be set up by he current software

where do I download drivers for airport extreme.....my iPad can not be set up by he current software

I have an airport extreme with updated software(latest) and I setup an Ipad 3 on it with ios6(wirelessly). You can access the airport to update it with the utitlity app on an ios device, mac, or pc. I dont think it has anything to do with the airport software. Did you try rebooting the airport, then trying again?
Like james said, maybe more detail would help someone help you.

Where to set sending of e-mails for dunning documents

Hello
Does anyone knows where to set sending of e-mails for dunning documents. They are being printed out but e-mail is not being sent.
Generalyy e-mail sending(trx scot) is set.
I guess it is pure Fi settinng to send e-mail as well. Could anyoune help
Thank you a lot in advance
Jan

Hi Jan,
Please refer SAP note
1042992 - Dunning by mail w/ SAPscript: Introductory text w/ attachmnt
Also refer SCN document
SAP FI Dunning Procedure customization and Functionality
Refer section
Activate the dunning via E-mail (To receive letter by mail)
Dunning letter output can be in two forms.
1)        Email
Manual Print out
H         Hope this helps.
              Regards,
             Deepak Kori

TS1559 My Wi-Fi setting is gray and I cannot do anything to it. Anyone know where to go on here for help?

My Wi-Fi is gray where I cannot select on or off when I go into settings; therefore, i cannot do anything wirelessly. Does anyone know where to go on here for help or have any suggestions? I would greatly appreciate it.

Generally an indication of a hardware failure. Try restoring your phone as a new device in iTunes. Eject when finished...don't sync any content to the phone. WiFi still grayed out? If so, most likely a hardware failure. Make an appointment at an Apple store to confirm.

Where to set up percentage for SPL?

Similar Messages

Maybe you are looking for