Where to start central instances for central adaptor engine
hi all,
in integration directory under cache notifications for central adaptor engine (central instances) are stopped.
please how can i restart the cache instances.
regards,
krushi
Have you tried the tips given in the SAP note...
Go through this PDF https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
it shud help u to troubleshoot the problem...
Regards,
Prasanthi.
Similar Messages
-
Installing the Central Instance for MSCS
Hi all
I am installing ECC 6.0 SR1 production in a cluster MSCS, have two nodes in Active-Passive.
When I go to install the Central Instance, the SAPINST does not present us with an option to select the local drive for the installation.
You can help me?
Its a bit urgent. Thanks In advanceif you gothrough the installation guide of SAP ERP 2005 at page 98 you will findout the layout of the shared disk. also go through the 3 Microsoft Cluster Installation chapter.
cheers,
-Sunil -
SRM 7.0 Central Contract-For Centralized Purchasing Scenario
Hello Experts
Is it possible to set up a corporate (read Centralized) Purchasing strategy, where in One Central purchasing organization creates and manages Central contracts for various Plants assigned to different company codes using SRM 7.0 with ECC Backend?
Tried to set this scenario up by assigning Purchase organization directly to Plants (in ECC) but the Contracts were failing during replication in ECC.
Any inputs on this are appreciated.
Thanks
Raman.
Note: Contracts went through successfully in ECC after assigning the Purchasing organization to Company code.Hi,
Please check this.
SPRO -> Enterprise structure -> Assignment ->
Logistics - General -> Assign Plant to company code.
Assign plant to company code
In the IMG activity "Assignment Plant - Company Code" you assign each plant to a company code.
A plant can only belong to one company code.
Note
Complete functionality of the system can only be ensured if the plants assigned to a company code are only those situated in the same country as the company code.
It is therefore recommended that you also create a company code for each country in which a plant is situated.
Examples
Only then are tax postings created when transferring stock between plants in different countries.
The taxation procedure and Intrastat declaration are supported only for the country of the company code.
Requirements
Before you can assign plants to company codes, you must define the valuation control.
You may change the valuation control in the production system only after contacting your SAP consultant. Changes may cause inconsistencies in documents.
Actions
Assign your plants to company codes.
Regards,
Masa -
Where's the portlet instance for each user?!? (delete a portlet)
Hi!
I'd like to know if there's a place (in WeblogicConsole or PortalAdministration or..) where i can see portlets available for a specific user.
Why? Because, if a user permanently delete a portlet (With the delete button on the portlet title bar) by mistake, I want to give it back to him...
Any idea how to do this?
I'm using weblogic 8.1 sp1.
Thx!
DomYou should be able to add portlets to user through the portal admin tool, if I remeber:
In nav bar
Portal Resources
Portals
MyPortal
MyDesktop
On the right:
Start playing around with the look and feel
If you don't have any luck adding the portlet back to the users view try removing the portlet entirely and added it back (bit of a hack but might work) -
Java Add-in Installation of the Central instance installation
I'm trying to re-install the Java Add-in Central Instance for ABAP.
During the installation of Java Engine, i met the error on SecureStore step.
In the LOG:
>> SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
>> A key/value pair with this key already exists in the store.
I had the right roles at the user SAPJSF.
I have also renamed the files in /usr/sap/MWF/SYS/global/security/data
SecStore.key
SecStore.properties
..and i receive the following:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
com.sap.security.core.server.secstorefs.FileMissingException: File "/sapmnt/MWF/global/security/data/SecStore.properties" does not exist although it should.
at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:372)
at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946)
at com.sap.security.core.server.secstorefs.SecStoreFS.handleInsert(SecStoreFS.java:963)
at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1276)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
If i rename only the SecStore.key in SecStore.key.old, i will receive the following:
>> SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
>> Warning: this command line user interface is meant as a last resort if
>> everything else fails.
>> The key phrase that you must type in now will be visible on the screen!
I've also lunched the following command from the opreating system level:
/usr/java14_64/bin/java -classpath /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB2/CENTRAL/CI/install/sharedlib/launcher.jar -Xmx256m -Xj9 com.sap.engine.offline.OfflineToolStart com.sap.security.core.server.secstorefs.SecStoreFS /usr/sap/MWF/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/MWF/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/MWF/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/MWF/SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/MWF/SYS/global/security/lib/tools/w3c_http.jar:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB2/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB2/CENTRAL/CI/install/sharedlib:/usr/opt/db2_08_01/java//db2jcc.jar:/usr/opt/db2_08_01/java//db2jcc_license_cisuz.jar insert -s MWF -f /usr/sap/MWF/SYS/global/security/data/SecStore.properties -k /sapmnt/MWF/global/security/data/SecStore.key admin/host/MWF
>> SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
>> Usage:
>> SecStoreFS status <standard>
>> SecStoreFS exists <standard>
>> SecStoreFS create <standard> -noenc
>> SecStoreFS create <standard> -enc -p "<key phrase>" [-nostore]
>> SecStoreFS insert <standard> <key> <value>
>> SecStoreFS encrypt <standard> -p "<key phrase>" [-nostore]
>> SecStoreFS updatep <standard> -p "<key phrase>" [-nostore]
>>where <standard> is [-s <SID>] [-f <data filename> -k <key filename>]
>> No value given!
Anybody knows how is possible to follow with the installation?
Best Regards.Dear Kumar,
referring to the note 1063396, i haven't got "iaik_jce_export.jar" file in the directory specifed in the note.
So, i've just renamed the following files
SecStore.key
SecStore.properties
NOTHING DIFFERENT.
To be sure, i have also renamed the directory /sapmnt/MWF/global/security/data --> data.old
You can see the result on the following log:
>>/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB2/CENTRAL/CI#cat SecureStoreInsert.log
>>SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
>>
>>com.sap.security.core.server.secstorefs.FileMissingException: >>File "/sapmnt/MWF/global/security/data/SecStore.properties" does not exist although it should.
>> at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:372)
>> at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946)
>> at com.sap.security.core.server.secstorefs.SecStoreFS.handleInsert(SecStoreFS.java:963)
>> at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1276)
>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
>> at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
>> at java.lang.reflect.Method.invoke(Method.java:391)
>> at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Do you have any idea to solve the problem and to start teh installation again?
Best regards. -
Error in Central Instance installation ERP 2005 Distributed System
Hi All,
I am currently trying to install Central Instance for ABAP Distributed system on AIX.
During the installation I encounter this error message:
WARNING 2006-09-20 14:22:39
Could not determine a valid JAVA_HOME directory from the environment.
INFO 2006-09-20 14:22:39
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/DISTRIBUTED/AS-ABAP/CI/FormalPasswordCheck.log.
ERROR 2006-09-20 14:22:39
FSL-04008 Unable to access application bin/java. A file or directory in the path name does not exist.
Before the installation SAPINST_JRE_HOME and JAVA_HOME variables were set to /usr/java14.
Please help.
Thanks,
ChieHi Chie,
definately wrong
the output should be similar to this one:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142sr1aifx-20051020 (SAP 142SR1a + 88494 + 84428 + 83602 + 89528 + 90372 + 88233 + 66827 + 92741 + 95636 + 96556 + 96581) (JIT enabled: jitc))
note the "64 bit" and "SAP" in there...
You can download it here:
https://www14.software.ibm.com/webapp/iwm/web/preLogin.do?source=javasap
Regards,
Pascal
PS: please give points for helpful answers -
Should user sessions be routed to Central Instance JVM in cluster?
Our production portal is clustered and we have eight JVMs. Is it a problem if we route user requests to the central instance JVM in the portal or should this instance be left to provide services to the other JVMs in the cluster?
Hi Timothy,
It is Ok to route traffic to the JVM on the central instance. Probably the main reason not to route traffic there is the possibility of a request taking down the central instance requiring (hopefully) a failover. (worst case portal down) My personal preference is if you have enough capacity on the other servers, don't route request to the central instance especially if you don't have a failover scenario for the central instance.
What you may want to consider is not routing to the central instance but if you loose one of the other server nodes, have the load balance use the central instance for the failover till the node is restarted.
Hope this helps,
John -
Some applications starting slowly / hang for a minute after launching
Hi!
For some time now, some applications are starting really slowly. The ones I could identify by now are Apple Pages, Microsoft Excel and Wofram's Mathematica. When I click the respective icon to start the application, the dock symbol jumps and everything looks fine, the system doesn't hang but when the just started application is active (its name appears on top, next to the Apple logo), the mouse cursor turns to the famous spinning beach ball when I move it to the top of the screen. The same happens when I just close an Document and create a new one (when all Pages documents are closed, the program presents all the templates; when I choose one, it hangs).
This behaviour doesn't appear everytime, but very often, so it is repeatable. I can't identify some point in time when this started, I don't think it has something to do with the 10.4.6 or 10.4.7 update. Pages is the newest version, as is Excel. Mathematica is version 5.2.0. I absolutely have no idea where to start to look for a reason for all this. I hope that someone here can help me!
Thanks in advance,
Marco
iBook G4 Mac OS X (10.4.6)Hi!
Thanks for your answer too!
1) Run Disk Utility and Repair Permissions on your hard drive.
Did that, some permissions were corrected (as always...)
2) Boot from your Tiger install disc and run Disk Utility and use the Repair Disk option on your hard drive.
After checking the disk, the Utility said that everything is fine.
1) You mentioned that this problem has been going on
for some time now. Can you think of any software
that you installed or software that you updated at
the time that you first noticed this behavior?
Unfotunately, I can't. This started about 3-4 weeks ago but I absolutely can't remember installing or doing something special that falls into the same region of time.
2) Do you run any kind of system hacks/optimizing software?
No, not as far as I know. I don't think that I ever installed some piece of software that really alters something in terms of the system itself (except for TinkerTool System, but I didn't start that in months)
3) What programs do you typically have open all of the time?
Mail and Safari are running all the times; other applications I'm using frequently are TextWrangler, X11, XCode, Terminal and World of Warcraft, among others.
(Almost) Sure Fire Solution to this problem: [...]
I knew that this was coming up
Of course, a complete reinstall is a solution I don't really like. I got my iBook last October, so this installation is running for 9 months now. But as everything else is fine, I really don't want to format my HD and do it the hard way.
By the way: I tried a few more applications and surprisingly, Apple Keynote, MS Word and MS Powerpoint don't hang after starting up. I also deleted all iWork and MS Office related stuff in ~/Library/Preferences and still no luck...
Marco -
Central instance error at "start instance" phase abap unknown...
hi there,
im installing central instance in mscs envi and im getting the error at "start instance" saying abap unknown.
below is the sapinst log can help pls
sapinst log
INFO 2008-01-25 15:39:30
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/keydb.1.xml'.
INFO 2008-01-25 15:39:30
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\inifile.xml.
INFO 2008-01-25 15:39:30
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/inifile.1.xml'.
INFO 2008-01-25 15:39:30
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:39:35
Execute step readProductXML of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Read_Product_XML|ind|ind|ind|ind|1|0.
WARNING 2008-01-25 15:39:35
The install parameter INSTPARA_DB is already defined (existing value IND, new value ORA ).
INFO 2008-01-25 15:39:35
Execute step checkRuntimeSystem of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Execute step askStandardMode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Execute step syncKeydb of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/product.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/product.1.xml'.
INFO 2008-01-25 15:39:35
Execute step changeUserInstall of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\change.log.
INFO 2008-01-25 15:39:35
Output of change user /install is written to the logfile change.log.
WARNING 2008-01-25 15:39:35
Execution of the command "change user /install" finished with return code 1. Output:
Install mode does not apply to a Terminal server configured for remote administration.
INFO 2008-01-25 15:39:35
Execute step chgautInstdirPublicAllOS4 of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Execute step replaceDLLs of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
File not found: [C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/msvcp71.dll].
INFO 2008-01-25 15:39:35
File not found: [C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/msvcr71.dll].
INFO 2008-01-25 15:39:35
Execute step registerEventsDll of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Execute step AddPrivileges of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'ECO\Centiq' on host '.'.
INFO 2008-01-25 15:39:35
Execute step checkInstDirPermissions of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:35
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\testfile.1.
INFO 2008-01-25 15:39:35
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\testfile.1.
INFO 2008-01-25 15:39:36
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:41
Execute step sync of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:41
Execute step adminCheck of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:41
Execute step W2KSPCheck of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:41
Execute step XPSPCheck of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:42
Execute step DNSCheck of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:39:42
DNS is configured correctly.
INFO 2008-01-25 15:39:42
Execute step done of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:39:42
Execute step startDefaultMode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:42
Execute step setDefaults of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:42
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Fri Jan 25 15:39:42 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
2
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-25 15:39:42
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Fri Jan 25 15:39:42 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
2
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-25 15:39:42
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar;C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2008-01-25 15:39:42
Found a valid JAVA_HOME directory C:\j2sdk1.4.2_15-x64 with JDK version 1.4.2_15.
INFO 2008-01-25 15:39:52
Copied file 'Z:/Java_comp/J2EE_OSINDEP/JDKVersion.xml' to '.'.
INFO 2008-01-25 15:39:52
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar;C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2008-01-25 15:39:52
Found a valid JAVA_HOME directory C:\j2sdk1.4.2_15-x64 with JDK version 1.4.2_15.
INFO 2008-01-25 15:39:52
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar;C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2008-01-25 15:39:52
Execute step getCD of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:52
Execute step verifyJavaHome of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:52
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Fri Jan 25 15:39:52 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
2
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-25 15:39:55
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Fri Jan 25 15:39:55 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
2
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-25 15:39:55
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Fri Jan 25 15:39:55 GMT 2008
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_15-x64
jre
bin
java.vm.version=1.4.2_15-b02
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
file.encoding.pkg=sun.io
user.country=GB
sun.os.patch.level=Service Pack 2
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
Program Files
sapinst_instdir
NW04S
SYSTEM
ORA
HA
ABAPJAVA
CI
java.runtime.version=1.4.2_15-b02
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
endorsed
os.arch=amd64
java.io.tmpdir=C\:
DOCUME1
centiq
LOCALS1
Temp
2
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_15-x64
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;L\:
oracle
OFS
CLI
jre
1.4.2
bin
client;L\:
oracle
OFS
CLI
jre
1.4.2
bin;L\:
oracle
PPI
102
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
j2sdk1.4.2_15-x64
bin;L\:
oracle
OFS
CLI
fs
fssvr
bin;L\:
oracle
OFS
CLI
fs
bin;L\:
oracle
OFS
SRV
fs
fssvr
bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
centiq
user.timezone=Europe/London
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar
user.name=centiq
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_15-x64
jre
sun.arch.data.model=64
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_15
java.ext.dirs=C\:
j2sdk1.4.2_15-x64
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_15-x64
jre
lib
rt.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
i18n.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jsse.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
jce.jar;C\:
j2sdk1.4.2_15-x64
jre
lib
charsets.jar;C\:
j2sdk1.4.2_15-x64
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=amd64
INFO 2008-01-25 15:39:55
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/ins-j2ee.jar;C:/DOCUME1/centiq/LOCALS1/Temp/2/sapinst_exe.3444.1201275543/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2008-01-25 15:39:55
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.1.xml'.
INFO 2008-01-25 15:39:55
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.2.xml'.
INFO 2008-01-25 15:39:55
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/JDKVersion.3.xml'.
INFO 2008-01-25 15:39:55
Execute step verifyPolicy of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:55
Creating directory C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck.
INFO 2008-01-25 15:39:55
Working directory changed to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jdkPolicyCheck.
INFO 2008-01-25 15:39:55
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI.
INFO 2008-01-25 15:39:55
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\local_policy.log.
INFO 2008-01-25 15:39:55
Output of C:\j2sdk1.4.2_15-x64\bin\jar.exe is written to the logfile local_policy.log.
INFO 2008-01-25 15:39:56
Output of C:\j2sdk1.4.2_15-x64\bin\jar.exe xvf C:/j2sdk1.4.2_15-x64/jre/lib/security/local_policy.jar:
extracted: META-INF/MANIFEST.MF
extracted: META-INF/JCE_DSA.SF
extracted: META-INF/JCE_DSA.DSA
extracted: META-INF/JCE_RSA.SF
extracted: META-INF/JCE_RSA.RSA
created: META-INF/
extracted: default_local.policy
INFO 2008-01-25 15:39:56
Working directory changed to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jdkPolicyCheck.
INFO 2008-01-25 15:39:56
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI.
INFO 2008-01-25 15:39:56
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\US_export_policy.log.
INFO 2008-01-25 15:39:56
Output of C:\j2sdk1.4.2_15-x64\bin\jar.exe is written to the logfile US_export_policy.log.
INFO 2008-01-25 15:39:56
Output of C:\j2sdk1.4.2_15-x64\bin\jar.exe xvf C:/j2sdk1.4.2_15-x64/jre/lib/security/US_export_policy.jar:
extracted: META-INF/MANIFEST.MF
extracted: META-INF/JCE_DSA.SF
extracted: META-INF/JCE_DSA.DSA
extracted: META-INF/JCE_RSA.SF
extracted: META-INF/JCE_RSA.RSA
created: META-INF/
extracted: default_US_export.policy
INFO 2008-01-25 15:39:56
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\default_local.policy.
INFO 2008-01-25 15:39:56
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\default_US_export.policy.
INFO 2008-01-25 15:39:56
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\JCE_DSA.DSA.
INFO 2008-01-25 15:39:56
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\JCE_DSA.SF.
INFO 2008-01-25 15:39:56
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\JCE_RSA.RSA.
INFO 2008-01-25 15:39:56
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\JCE_RSA.SF.
INFO 2008-01-25 15:39:56
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\jdkPolicyCheck\META-INF\MANIFEST.MF.
INFO 2008-01-25 15:39:56
Removing directory C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jdkPolicyCheck/META-INF.
INFO 2008-01-25 15:39:56
Removing directory C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jdkPolicyCheck.
INFO 2008-01-25 15:39:56
Execute step setNWOption of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:39:56
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0.
INFO 2008-01-25 15:39:56
Execute step collect of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:58
Found these instances:
sid: PPI, number: 00, name: ASCS00, host: sapxpi
sid: PPI, number: 01, name: SCS01, host: sapxpi
sid: PPI, number: 10, name: ERS10, host: s5
sid: PPI, number: 11, name: ERS11, host: s5
sid: PPI, number: 10, name: ERS10, host: s6
sid: PPI, number: 11, name: ERS11, host: s6
INFO 2008-01-25 15:39:58
Execute step getMounts of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:58
Execute step getMounts of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0|NW_getMounts|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:59
Execute step updateMountInfo of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:39:59
Execute step getProfileDir of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_readProfileDir|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:40:48
Execute step fillContext2 of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0.
INFO 2008-01-25 15:40:49
Execute step isUnicodeFromStack of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:40:49
Execute step isUnicodeFromExecutables of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:40:50
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\msg_server.exe.log.
INFO 2008-01-25 15:40:50
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI.
INFO 2008-01-25 15:40:50
Output of F:\usr\sap\PPI\ASCS00\exe\msg_server.exe -v is written to the logfile msg_server.exe.log.
INFO 2008-01-25 15:40:50
Execution of the command "F:\usr\sap\PPI\ASCS00\exe\msg_server.exe -v" finished with return code 0. Output:
msgserver information
kernel release 700
kernel make variant 700_REL
DBMS client library
compiled on NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
compiled for 64 BIT
compilation mode UNICODE
compile time Aug 31 2006 20:13:01
update level 0
patch number 73
source id 0.075
supported environment
database (SAP, table SVERS) 700
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
msgserver patch information
( 0.001) MS: enable server shutdown (note 821875)
( 0.001) MS: dont bind external port for SCS instance (note 821875)
( 0.002) MS: new pseudo parameter rdisp/msserv_no (note 834052)
( 0.007) CST patch collection 21 2005 (note 845887)
( 0.011) CST patch collection 24 2005 (note 851195)
( 0.014) CST Patch Collection 28 2005 (note 860319)
( 0.018) CST Patch Collection 31 2005 (note 867690)
( 0.023) CST Patch Collection 36 2005 (note 874665)
( 0.023) CST Patch Collection 37 2005 (note 877058)
( 0.023) VMC Patch Collection 6 (note 865932)
( 0.026) CST Patch Collection 39 2005 (note 884266)
( 0.033) CST Patch Collection 45 2005 (note 895230)
( 0.034) J2EE engine can't reconnect (note 895230)
( 0.036) CST Patch Collection 49 2005 (note 904777)
( 0.046) CST Patch Collection 06 2006 (note 921223)
( 0.049) CST Patch Collection 09 2006 (note 928898)
( 0.050) Avoid deadlock in exception handler, when writing the stacktrace (note 907123)
( 0.053) CST Patch Collection 14 2006 (note 937223)
( 0.057) CST Patch Collection 17 2006 (note 944284)
( 0.060) CST Patch Collection 22 2006 (note 950845)
( 0.065) P4HTTP added as logon type (note 958374)
( 0.065) CST Patch Collection 26 2006 (note 957514)
( 0.069) CST Patch Collection 29 2006 (note 962917)
( 0.073) CST Patch Collection 33 2006 (note 970657)
INFO 2008-01-25 15:40:50
Execute step isUnicodeFromMsgServer of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:40:50
Execute step isUnicodeFromProfile of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:40:50
Execute step askUnicode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getUnicode|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:40:51
Execute step checkMsgServer of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:40:51
Execute step askABAPMs of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:40:51
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:51
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:51
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:51
Message server (sapxpi/3900) allows connections to its internal port from this host.
INFO 2008-01-25 15:40:51
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:51
Execute step askJavaMs of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:40:51
Connect to message server (sapxpi/3901) succeeded.
INFO 2008-01-25 15:40:51
Disconnect from message server (sapxpi/3901) succeeded.
INFO 2008-01-25 15:40:51
Connect to message server (sapxpi/3901) succeeded.
INFO 2008-01-25 15:40:51
Message server (sapxpi/3901) allows connections to its internal port from this host.
INFO 2008-01-25 15:40:51
Disconnect from message server (sapxpi/3901) succeeded.
INFO 2008-01-25 15:40:51
Execute step getUnicode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:40:52
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Execute step getMsPort of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:40:52
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Connect to message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Disconnect from message server (sapxpi/3900) succeeded.
INFO 2008-01-25 15:40:52
Execute step getUnixIDs of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_checkMsgServer|ind|ind|ind|ind|2|0.
INFO 2008-01-25 15:40:52
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0.
INFO 2008-01-25 15:40:52
Execute step unpcackSECINSTTOOLS of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetMasterPassword|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:40:52
Creating directory C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec.
INFO 2008-01-25 15:40:52
Working directory changed to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/installsec.
INFO 2008-01-25 15:40:52
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI.
INFO 2008-01-25 15:40:52
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\SECINSTTOOLS.log.
INFO 2008-01-25 15:40:52
Output of C:\DOCUME1\centiq\LOCALS1\Temp\2\sapinst_exe.3444.1201275543\SAPCAR.exe is written to the logfile SECINSTTOOLS.log.
INFO 2008-01-25 15:40:53
Output of C:\DOCUME1\centiq\LOCALS1\Temp\2\sapinst_exe.3444.1201275543\SAPCAR.exe -x -v -g -i -f Z:\BS2005\IM_WINDOWS_X86_64\COMMON\INSTALL\SECINSTTOOLS.SAR,:
SAPCAR: processing archive Z:/BS2005/IM_WINDOWS_X86_64/COMMON/INSTALL/SECINSTTOOLS.SAR (version 2.01)
x exception.jar
x logging.jar
x tc_sec_compat.jar
SAPCAR: 3 file(s) extracted
INFO 2008-01-25 15:40:53
Execute step askMasterPwd of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetMasterPassword|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:05
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-25 15:41:05
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u DDIC -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u DDIC -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 25, 2008 3:41:05 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 25, 2008 3:41:05 PM Info: Called for user "DDIC"
Jan 25, 2008 3:41:05 PM Info: Stack type: ABAP
Jan 25, 2008 3:41:05 PM Info: Performing check for username
Jan 25, 2008 3:41:05 PM Info: Performing check for password
Jan 25, 2008 3:41:05 PM Info: Operation executed successfully
Jan 25, 2008 3:41:05 PM Info: Leaving with return code 0
INFO 2008-01-25 15:41:06
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u SAPSTAR -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u SAPSTAR -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 25, 2008 3:41:06 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 25, 2008 3:41:06 PM Info: Called for user "SAPSTAR"
Jan 25, 2008 3:41:06 PM Info: Stack type: ABAP
Jan 25, 2008 3:41:06 PM Info: Performing check for username
Jan 25, 2008 3:41:06 PM Info: Performing check for password
Jan 25, 2008 3:41:06 PM Info: Operation executed successfully
Jan 25, 2008 3:41:06 PM Info: Leaving with return code 0
INFO 2008-01-25 15:41:06
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u J2EE_ADMIN -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u J2EE_ADMIN -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 25, 2008 3:41:06 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 25, 2008 3:41:06 PM Info: Called for user "J2EE_ADMIN"
Jan 25, 2008 3:41:06 PM Info: Stack type: ABAP
Jan 25, 2008 3:41:06 PM Info: Performing check for username
Jan 25, 2008 3:41:06 PM Info: Performing check for password
Jan 25, 2008 3:41:06 PM Info: Operation executed successfully
Jan 25, 2008 3:41:06 PM Info: Leaving with return code 0
INFO 2008-01-25 15:41:06
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u J2EE_GUEST -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u J2EE_GUEST -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 25, 2008 3:41:06 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 25, 2008 3:41:06 PM Info: Called for user "J2EE_GUEST"
Jan 25, 2008 3:41:06 PM Info: Stack type: ABAP
Jan 25, 2008 3:41:06 PM Info: Performing check for username
Jan 25, 2008 3:41:06 PM Info: Performing check for password
Jan 25, 2008 3:41:06 PM Info: Operation executed successfully
Jan 25, 2008 3:41:06 PM Info: Leaving with return code 0
INFO 2008-01-25 15:41:06
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u SAPJSF -message_file FormalPasswordCheck.message -p XXXXXX is written to the logfile FormalPasswordCheck.log.
INFO 2008-01-25 15:41:06
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\exception.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\logging.jar;C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\HA\ABAPJAVA\CI\installsec\tc_sec_compat.jar" com.sap.security.tools.FormalPasswordCheck -a check -s abap -u SAPJSF -message_file FormalPasswordCheck.message -p XXXXXX" finished with return code 0. Output:
Jan 25, 2008 3:41:06 PM Info: Formal password check tool (com.sap.security.tools.FormalPasswordCheck) called for action "check"
Jan 25, 2008 3:41:06 PM Info: Called for user "SAPJSF"
Jan 25, 2008 3:41:06 PM Info: Stack type: ABAP
Jan 25, 2008 3:41:06 PM Info: Performing check for username
Jan 25, 2008 3:41:06 PM Info: Performing check for password
Jan 25, 2008 3:41:06 PM Info: Operation executed successfully
Jan 25, 2008 3:41:06 PM Info: Leaving with return code 0
INFO 2008-01-25 15:41:06
Execute step setDefaults of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetUserParameterWindows|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:41:07
Execute step askDomain of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetUserParameterWindows|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:41:07
Execute step askPasswords of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetUserParameter|ind|ind|ind|ind|3|0|NW_GetUserParameterWindows|ind|ind|ind|ind|1|0.
INFO 2008-01-25 15:41:14
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0.
INFO 2008-01-25 15:41:16
Execute step setInstallationLoadType of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_getLoadType|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:16
Execute step askSystemCopyLoadType of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_getLoadType|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:16
Execute step setLoadType of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_getLoadType|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:16
Execute step setInstallDB of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0.
INFO 2008-01-25 15:41:16
Execute step fillDB6InitializeContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_getDBInfo|ind|ind|ind|ind|4|0.
INFO 2008-01-25 15:41:16
Execute step fillContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0|NW_GetDBUserParameter|ind|ind|ind|ind|5|0.
INFO 2008-01-25 15:41:16
Execute step sanityCheckAccounts of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_GetSidFromProfilesPartial|ind|ind|ind|ind|3|0.
INFO 2008-01-25 15:41:16
Execute step fillContext2 of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:17
Execute step fillPRCContext of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:17
Execute step fillContextliveCache of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:17
Execute step loadUsageTypes of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Init|ind|ind|ind|ind|13|0.
INFO 2008-01-25 15:41:17
Execute step stopDefaultMode of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:17
Execute step fillContextUsageTypes of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0.
INFO 2008-01-25 15:41:17
Execute step setAllPossible of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:18
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/usages_data.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/usages_data.1.xml'.
INFO 2008-01-25 15:41:18
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/usages_data.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/usages_data.2.xml'.
INFO 2008-01-25 15:41:18
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jexclude.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/HA/ABAPJAVA/CI/jexclude.1.xml'.
INFO 2008-01-25 15:41:18
Execute step determineScenarioParameters of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:18
Execute step prepareUsagesTableForUserInputXml of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2008-01-25 15:41:18
Execute step determinePossibleUsageTypesXml of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|14|0|SAP_Sofsap resolved it
-
JAVA Add-in For Central ABAP Instance installation failure
Hi! I'm attempting to install a java add-in to an ABAP central instance in our sandbox for NW04 SR1. After sapinst is started, the process runs for approximately 2 minutes then fails. I've not been successful in determining exactly why. I have environment variables set for JAVA_HOME, SAPINST_JRE_HOME, and even a specific TEMP directory with gigs of available space.
The process "reads the configuration", "creates working directories", "changes to those working directories", "prepares for installation", then starts a child process which immediately crashes.
The message I first receive is: Connection to SAPinst broken, please correct and restart....
within AIX, the message states iauxsysex.c:297 child 2519168 has crashed. Executable directory......Contact Support.
also. iaextract.c.883: child has signaled an exec error
Thanks if you can offer assistance.
ShaneHi Shane,
This problem is nearly always to do with User Limits. Depending on the shell you are using you can view and change the limits using the limit or the ulimit command. If you change a limit the new value holds only for the shell and processes started in this shell. Hence if you change limits you have to do it in identically the same shell process from which you start sapinst.
If you are using csh or tcsh run limit to view all limits. The limits stacksize, datasize and memory are especially important. If they are not yet unlimited you should set them to unlimited using the commands
limit stacksize unlimited
limit datasize unlimited
limit memory unlimited
Please verify the result using
limit
If you are using ksh or bash run
ulimit -a
to view the limits and
ulimit -d unlimited
ulimit -s unlimited
ulimit -m unlimited
to set the limits.
Retry the SAPinst once you have set these ulimits -
Not able to start JAVA Central Instance
Hello All,
After doing JAVA Support Pack through JSPM I am not able to start the JAVA Central Instance of Solman.
Pasting the disp+work error.
Tue Nov 10 09:17:54 2009
J2EE server info
start = TRUE
state = STARTED
pid = 6020
argv[0] = G:\usr\sap\DSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = G:\usr\sap\DSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=G:\usr\sap\DSM\SYS\profile\DSM_DVEBMGS01_GOLITSAPD36
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64990
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=DSM
argv[7] = -DSAPMYNAME=GOLITSAPD36_DSM_01
argv[8] = -DSAPPROFILE=G:\usr\sap\DSM\SYS\profile\DSM_DVEBMGS01_GOLITSAPD36
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Tue Nov 10 09:18:03 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1320
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1714) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6020)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Tue Nov 10 09:18:14 2009
DpEnvCheckJ2ee: switch off j2ee start flag.
Please suggest me.Hello Juan,
Pasting you the logs:
dev_w0 :
Tue Nov 10 20:41:04 2009
A GENER starting remote generation: BBP_ALERT_SB_NOTTRANSFERED (requested by W12).
A GENER starting remote generation: SAPLSI00 (requested by W12).
A GENER starting remote generation: SAPLBBP_PD_SC (requested by W12).
A
A Tue Nov 10 20:41:10 2009
A GENER starting remote generation: SAPLBBP_PD (requested by W12).
A
A Tue Nov 10 20:41:14 2009
A GENER starting remote generation: SAPLBBP_MS_C (requested by W12).
A GENER starting remote generation: SAPLBBP_PDH (requested by W12).
A
A Tue Nov 10 20:41:17 2009
A GENER starting remote generation: SAPLCRM_ORDER_CB (requested by W12).
M
M Tue Nov 10 21:16:04 2009
M *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c 947]
M *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c 947]
M *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c 947]
M *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c 947]
M
M Tue Nov 10 21:16:05 2009
M *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c 947]
M
M Tue Nov 10 21:41:09 2009
M *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c 947]
M *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c 947]
M
M Tue Nov 10 22:41:10 2009
M *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c 947]
std_server0.out :
Nov 10, 2009 6:49:36 AM /System/Server [SAPEngine_Application_Thread[impl:3]_32] Group: EJBQL-SQL-Mapper: com.sap.sql.ejb.SQLMapper = com.sap.sql.ejb.common.CommonSQLMapper
Nov 10, 2009 6:49:36 AM /System/Server [SAPEngine_Application_Thread[impl:3]_32] Group: EJBQL-SQL-Mapper: com.sap.sql.ejb.OpenSQLVerification = semantics
Nov 10, 2009 6:49:36 AM /System/Server [SAPEngine_Application_Thread[impl:3]_32] Group: EJBQL-SQL-Mapper: com.sap.sql.ejb.SQLChecker = com.sap.sql.ejb.debug.OpenSQLChecker
Nov 10, 2009 6:49:36 AM /System/Server [SAPEngine_Application_Thread[impl:3]_32] Group: List of currently effective properties ended.
Nov 10, 2009 6:49:36 AM /System/Server [SAPEngine_Application_Thread[impl:3]_32] Group: Closing group
SAP J2EE Engine Version 7.00 PatchLevel 51441.450 is shutting down! PatchLevel 51441.450 November 22, 2008 15:34 GMT
Stopping services.
Service com.adobe~TrustManagerService stopped. (16 ms)
Service tcdisdic~srv stopped. (0 ms)
Service com.adobe~DocumentServicesConfiguration stopped. (0 ms)
Service rfcengine stopped. (0 ms)
Service webdynpro stopped. (0 ms)
Service com.adobe~DocumentServicesDestProtoService stopped. (16 ms)
Service pmi stopped. (31 ms)
Service tcsecvsi~service stopped. (0 ms)
Service tcsecdestinations~service stopped. (0 ms)
Service tcsecwssec~service stopped. (0 ms)
Service sld stopped. (0 ms)
Service tcsecsecurestorage~service stopped. (0 ms)
Service monitor stopped. (62 ms)
Service adminadapter stopped. (0 ms)
Service com.adobe~LicenseService stopped. (0 ms)
Service basicadmin stopped. (15 ms)
Service tcsmdserver~service stopped. (16 ms)
Service configuration stopped. (0 ms)
Service UT stopped. (0 ms)
Service ejb stopped. (0 ms)
Service servlet_jsp stopped. (62 ms)
Service com.adobe~DocumentServicesLicenseSupportService stopped. (0 ms)
Service ssl stopped. (0 ms)
Service com.adobe~XMLFormService stopped. (16 ms)
Service tcseccertrevoc~service stopped. (0 ms)
Service com.adobe~DocumentServicesBinaries2 stopped. (0 ms)
Service com.adobe~PDFManipulation stopped. (0 ms)
Service com.adobe~DataManagerService stopped. (0 ms)
Service keystore stopped. (0 ms)
Service jms_provider stopped. (16 ms)
std_dispatcher.out :
Loading services.:
Service keystore started. (16 ms).
Service iiop started. (78 ms).
Service httptunneling started. (0 ms).
Service memory started. (15 ms).
Service webservices started. (31 ms).
Service security started. (0 ms).
Service sld started. (46 ms).
Service timeout started. (62 ms).
Service licensing started. (16 ms).
Service r3startup started. (125 ms).
Service ssl started. (78 ms).
Service jmx_notification started. (141 ms).
Service shell started. (219 ms).
Service telnet started. (297 ms).
Service jmx started. (359 ms).
Service p4 started. (985 ms).
Service classload started. (16 ms).
Service log_configurator started. (2968 ms).
Service configuration started. (16 ms).
Service jms_provider started. (1187 ms).
Service tc.monitoring.logviewer started. (1375 ms).
Service basicadmin started. (1328 ms).
Service adminadapter started. (0 ms).
Service http started. (1844 ms).
Service monitor started. (766 ms).
ServiceManager started for 6453 ms.
Framework started for 10766 ms.
SAP J2EE Engine Version 7.00 PatchLevel 51441.450 is running!
PatchLevel 51441.450 November 22, 2008 15:34 GMT
>
Login :
SAP J2EE Engine Version 7.00 PatchLevel 51441.450 is shutting down! PatchLevel 51441.450 November 22, 2008 15:34 GMT
Stopping services.
Service classload stopped. (0 ms)
Service tc.monitoring.logviewer stopped. (0 ms)
Service p4 stopped. (16 ms)
Service ssl stopped. (0 ms)
Service keystore stopped. (0 ms)
Service iiop stopped. (3000 ms)
Service adminadapter stopped. (0 ms)
Service monitor stopped. (15 ms)
Service security stopped. (0 ms)
Service jms_provider stopped. (1000 ms)
Service basicadmin stopped. (0 ms)
Service jmx stopped. (0 ms)
Service webservices stopped. (0 ms)
Service sld stopped. (0 ms)
Service telnet stopped. (1000 ms)
Service http stopped. (1000 ms)
Service timeout stopped. (0 ms)
Service configuration stopped. (0 ms)
Service log_configurator stopped. (0 ms)
Service memory stopped. (0 ms)
Service r3startup stopped. (0 ms)
Service licensing stopped. (0 ms)
Service httptunneling stopped. (0 ms)
Service shell stopped. (0 ms)
Service jmx_notification stopped. (0 ms)
Please suggest me Juan.. -
Central Instance Java Server0/Server1 not starting
We recently installed a new dialog instance for our CUA system (abap and java stacks). Now, whenever the Java stack fully initializes itself on the Dialong Instance first, the Server0 and Server1 on the Central Instance Java stack will not complete their startups. Both Server0 and Server1 get stuck on the "Starting Apps" status. Anybody see this before? Any suggestions on how to fix/reconfigure the java so that this does not happen?
Currently, our work around is to always let the Central Instance finish its startup and then start the Dialong Instance. However, if the CI Java crashes and restarts on its own, it will not be able to complete its startup until we shut down the DI instance.
Thanks.andreas,
Here is a partial std_server0.out file. It seems that the dumping/memory/locking problem starts immediately after the Framework has started:
ServiceManager started for 354203 ms.
Framework started for 422687 ms.
SAP J2EE Engine Version 7.00 PatchLevel 109886.44 is running!
PatchLevel 109886.44 November 17, 2007 10:27 GMT
Full thread dump Java HotSpot(TM) 64-Bit Server VM (1.4.2_13-b06 mixed mode):
"DSR_Write_Rate_Monitor: DOWNEAVM249.dow_DGD_407398750" prio=5 tid=0x000000001a6b9860 nid=0x4864 runnable [0x0000000000000000..0x0000000000000000]
"Thread-33" prio=5 tid=0x000000001a6b95d0 nid=0x4230 runnable [0x0000000000000000..0x0000000000000000]
"Thread-32" daemon prio=10 tid=0x000000001a6b90b0 nid=0x5044 in Object.wait() [0x000000001de1f000..0x000000001de1fb80]
at java.lang.Object.wait(Native Method)
- waiting on <0x000000008eff2080> (a java.util.TaskQueue)
at java.util.TimerThread.mainLoop(Timer.java:429)
- locked <0x000000008eff2080> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:382)
"SAPEngine_CCMSCommandConsumer_0" prio=10 tid=0x000000001ac73d80 nid=0x1b1c in Object.wait() [0x000000001dc1f000..0x000000001dc1fb80]
at java.lang.Object.wait(Native Method)
- waiting on <0x000000008eff0108> (a java.lang.Object)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.concurrent.LinkedQueue.take(LinkedQueue.java:104)
- locked <0x000000008eff0108> (a java.lang.Object)
at com.sapmarkets.bam.jmxadapter.CCMSCommandConsumer.run(CCMSCommandConsumer.java:38)
at java.lang.Thread.run(Thread.java:534)
"Thread-29" prio=10 tid=0x000000001ac73860 nid=0x2a64 in Object.wait() [0x000000001da1f000..0x000000001da1fb80]
at java.lang.Object.wait(Native Method)
- waiting on <0x000000008eff01d0> (a com.sap.jmx.provider.ProviderConnectionTimer)
at com.sap.jmx.provider.ProviderConnectionTimer.run(ProviderConnectionTimer.java:31)
- locked <0x000000008eff01d0> (a com.sap.jmx.provider.ProviderConnectionTimer)
at java.lang.Thread.run(Thread.java:534)
"Thread-28" prio=10 tid=0x0000000008d2dad0 nid=0x4bf4 in Object.wait() [0x000000001d81f000..0x000000001d81fb80]
at java.lang.Object.wait(Native Method)
- waiting on <0x000000008eff0268> (a com.sap.jmx.provider.LazyMBeanLoader)
at java.lang.Object.wait(Object.java:429)
at com.sap.jmx.provider.LazyMBeanLoader.run(LazyMBeanLoader.java:133)
- locked <0x000000008eff0268> (a com.sap.jmx.provider.LazyMBeanLoader)
at java.lang.Thread.run(Thread.java:534)
"SAPEngine_Application_Thread[impl:3]_1" prio=5 tid=0x00000000012e4920 nid=0x38b0 in Object.wait() [0x0000000007daf000..0x0000000007dafb80]
at java.lang.Object.wait(Native Method)
- waiting on <0x000000008fb8f078> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x000000008fb8f078> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:149)
"SAPEngine_Application_Thread[impl:3]_0" prio=5 tid=0x00000000012e4690 nid=0xc20 in Object.wait() [0x00000000079af000..0x00000000079afb80]
at java.lang.Object.wait(Native Method)
- waiting on <0x000000008fb8f078> (a com.sap.engine.lib.util.WaitQueue)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
- locked <0x000000008fb8f078> (a com.sap.engine.lib.util.WaitQueue)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:149)
"Thread-1" prio=5 tid=0x00000000012e4170 nid=0x3a68 in Object.wait() [0x0000000007baf000..0x0000000007bafb80]
at java.lang.Object.wait(Native Method)
- waiting on <0x000000008fbbf530> (a com.sap.engine.core.Framework)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.core.Framework.start(Framework.java:207)
- locked <0x000000008fbbf530> (a com.sap.engine.core.Framework)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.boot.FrameThread.run(FrameThread.java:61)
at java.lang.Thread.run(Thread.java:534)
"Signal Dispatcher" daemon prio=10 tid=0x00000000012e34a0 nid=0x2334 waiting on condition [0x0000000000000000..0x0000000000000000]
"Finalizer" daemon prio=9 tid=0x00000000012e3210 nid=0x23c8 in Object.wait() [0x0000000006baf000..0x0000000006bafb80]
at java.lang.Object.wait(Native Method)
- waiting on <0x00000000909192e0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
- locked <0x00000000909192e0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x00000000012e2f80 nid=0x1438 in Object.wait() [0x00000000069af000..0x00000000069afb80]
at java.lang.Object.wait(Native Method)
- waiting on <0x000000008f9a61d0> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:429)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:115)
- locked <0x000000008f9a61d0> (a java.lang.ref.Reference$Lock)
"main" prio=5 tid=0x00000000012e2cf0 nid=0x3cb8 in Object.wait() [0x000000000222f000..0x000000000222fc68]
at java.lang.Object.wait(Native Method)
- waiting on <0x000000008fbbf3e0> (a com.sap.engine.boot.StartFrame)
at java.lang.Object.wait(Object.java:429)
at com.sap.engine.boot.StartFrame.work(StartFrame.java:121)
- locked <0x000000008fbbf3e0> (a com.sap.engine.boot.StartFrame)
at com.sap.engine.boot.Start.main(Start.java:34)
"VM Thread" prio=5 tid=0x000000000137a4a0 nid=0x3cac runnable
"VM Periodic Task Thread" prio=10 tid=0x000000000137a6a0 nid=0xccc waiting on condition
"Suspend Checker Thread" prio=10 tid=0x000000000137a5a0 nid=0x67c runnable
Service tc.monitoring.logviewer started. (89484 ms).
>
Login :### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.TypeMappingImpl::initializeRelations
Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType::_loadInto
Thanks, Bruce -
Central Instance didn't start after Kernel Upgrade
Hello,
I've made a Kernel Upgrade for a Solution Manager with kernel version: release 7.01, 64-Bit Unicode on Microsoft Windows Server 2003 Enterprise x64 Edition.
When I wanted the SAP instance, Central Services instance started, but Central Instance didn't.
In the sapstart.log file the following error: "SAPSTART finished successfully on , but at least one process doesn't run correctly:
sapstart.exe=>sapparam (1c): No Profile used."
The file "dev_w0" says the following:
in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ThCallDbBreak: use db_sqlbreak
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 1
B db_sqlbreak() = 1
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20091025 070423 BCE-SAP-SRV01
B 000 001 +DBO+0000 000000476 DISCONNECTED NO NO NO 000 255 255 20100114 204611 BCE-SAP-SRV01
B Disconnected from connection 0
B statistics db_con_commit (com_total=730465, com_tx=135964)
B statistics db_con_rollback (roll_total=9630, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 10744) [dpnttool.c 334]
I didn't really know what to do in this case... Could you please give me a hint?
I also want to tell you that the Database Instance (MSSQL server) disappeared from SAP MMC, but I checked in SQL Server Configuration Manager and the processes are running...
Thank you in advance for your help,
NoemiPlease check the Wndows event log, you may have run into the problem described in
Note 1402510 - Resolving SideBySide Assembly Errors
Note 1375494 - SAP system does not start after applying SAP kernel patch
Markus -
Logic for sending data files to multiple instances of Central
We are using Central Pro Output Server 5.6 with a single Central instance as of default installation on a Windows Server 2003. Data for the transaction files coming from our iSeries system via a printer queue (\\.\pipe\jetform\queuename)
Now we want to be able to produce more documents from Central much faster and therefore setting up multiple instances of Central. The problem is then where to put the logic for choosing instances.
The simplest way to do this would be to have iSeries to alternate the data files to different pipes (printer queues) for Central. But as we dont want to change our iSeries configuration for this, is there a way to solve this problem in Central?
Any help with this is much appreciatedCentral provides no mechanism that I'm aware of that would do anything resembling the job distribution that you are wanting. Central is written to monitor it's input folders and process the files it finds there. Each instance is essentially separate from each other.
Your source system will need to select the appropriate instance to be used. Either that or you will need to have something between the source system and Central that is doing the distribution. For example, you could have the source system write to a folder that is not being monitored by Central and write a program that runs as a service that does monitor that folder. This program would then distribute the files. The likely drawback of having an intermediary program is that you are likely to not end up getting the documents printed any faster than with a single instance.
Another possible way, if the source system can create files with different file name extensions, would be to have them all written to the same folder and have each instance checking that particular folder but looking for files with different extensions. This might be problematic, though, because it might also end up with each instance watching the same "control" folder so that doing things like pausing Central would end up with no control of which instance was going to be paused.
The default setting for Central has it pausing for 5 seconds if it completes a job and there are no more files waiting for it. If your jobs are not coming in faster than Central is processing them then you would be getting some of this delay for your jobs. You could reduce this time or even set Central to process a job as soon as it shows up. I don't know if version 5.6 still has the problem but an earlier version would not "see" a file if it happened to show up exactly when it was looking for more (it was probably showing up milli-seconds after Central looked). This caused that job to just sit there until the next job showed up.
A major factor in getting the documents produced faster is going to be the speed and number of printers that they are going to - plus the number of pages in each document. For us, the single instance of Central that we are currently using can produce print much faster than our HP9050 printers (50 ppm) can actually print it.
You must be doing a lot of forms or each job is doing a lot of processing. Our typical print job does 4 tasks (depending on the job this can include things like: passing the file through the transformation agent, updating a mainframe database, FTPing the file to another server for archiving, and producing the print). A typical job with 11 output pages takes only 2-3 seconds. We have a task that runs every morning that retrieves mainframe generated jobs. I just checked one of our servers and it processed 208 jobs in exactly 8 minutes (26 jobs per minute at an average of 2.3 seconds per job). We also thought we'd need multiple instances due to speed but that just isn't the case for us. We have other reasons to move to multiple instances but speed in not a major factor any more. -
Error: installing Java Add-in for Central instance
Dear experts,
i've installed the SCS and the Java Add-in for DB successful. While trying to install the java add-in for the central instance i get the following error:
An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > Java Add-In for ABAP > MaxDB > Central System > Central Instance Java Add-In ( Last error reported by the step :TypeError: instance has no properties (in script NW_Addin_CI|ind|ind|ind|ind, line 109346: ???)
Thanks in advance.
DanielHi,
Check below thread:
Error installing SAP NetWeaver 2004s Java Trial Version (SP9)
Thanks
Sunny
Maybe you are looking for
-
Only vibrates does not ring or sound with text even with tones selected
HELP!!! My phone is not on silent or do not disturb but it only vibrates and does not ring or sound with text messages All sounds have been selected correctly. Any idea what could be wrong? Thanks!
-
Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The temporary file it saves is called ICMMultiPassStorage. This file gets so large that eventually the program and exportin
-
Problem with update packages MDT
Hi, when i build boot image with update packages the mdt it give me a error Error: 0x800f081e The specified package is not applicable to this image. Exit code = -2146498530 The wim file is take from win 7 italian iso x64, the updates I push in mdt ar
-
Hi, Recently, I'm not able to connecting any External Hard Drive via FW800 Port. That means, no matter how I try to connect to different external hard drive and change to others FW Cables, It still not showing on my desktop. But, Drive is showing on
-
How to change the short name????
i bought this iBook G4 off a friend and i was only able to change the name and pass on the account part and was not able to change the short name... it a chicks name so i dont want that to show on there,, does anybody know how to change that ??? than