Where to start... where to start..?

Alright so my buddy gave me his newly restored PowerMac G5 while hes on a trip to Mexico, and I was gonna mess around with it to see if I can set up my own personell server from my house anyone can see... problem is, I don't know where to start. I know Mac OS X like the back of my hand, but never messed with server... so first off here are my specs
* PowerMac G5 Dual 2.0
* 4MBps Broadband Line
* OS X Server
The first thing I want to do is make it so when you type in my ip address a site will come up. Sorry to all those people who are calling me dumb right now, but Apple discussions are always me first stop since everyone is so dang sweet here. Thanks ahead of time! I will be watching this post so if you have any questions feel free to ask.
AIM: PBFanatic2646
I would love help over iChat!

Yup, that matters.
Just to test things out:
- Make sure the web service is running on the server.
- Turn on port forwarding on your router so that port 80 traffic gets sent to your server. (For this, it would help to give your server a static IP address.)
- Get your public IP address (you can usually get this by checking your router's status).
- Using a machine from another location, or a service that will test the connection for you, try to load your server's default web page in a browser (http://your-public-ip-address).
This will help you test just basic connectivity from the outside to your server. If nothing loads for you from the outside, your ISP might be blocking port 80 traffic like that (not uncommon with residential ISPs).
You can configure the web server to run on a different port and then make the alterations in your router.
Even if you can reach your server's web site, check your ISP's acceptable use policy -- in some cases, running your own server isn't permitted even if they don't go through the trouble of blocking it.
Otherwise, you're all set to start setting it up properly.

Similar Messages

  • Jonatan R. Aug 1, 2012 5:42 PM Hello, didnt really know hwere to post this guess it more belong under like "computers" generally,    but! For a while...        (-THE LONGER VERSION) : No whait!, let me start where it all began, 2009, a december (erhh.. ii

    Hello, didnt really know hwere to post this guess it more belong under like "computers" generally, 
    but! For a while... 
        (-THE LONGER VERSION) :
    No whait!, let me start where it all began, 2009, a december (erhh.. iii think? Hwatever!) litlle me hwere nearly Totally blank to the computer world. And suddenly it stood there on the table, a shining (it was shining back there) new "hp pavillion entertainment pc" with its smell of fresh plastic mixed hwith the strong smell from the cardboardbox, remember it as if it were yesterday
    ... Since then.... I have today a good solid pc knowing! (at more advance level cmd,bott menu, recovery, blah, blah... NERD!) here at the last awhile, ive prommised to make a lot! A lot of video projects!
    (okay 2, but some big ones!) avchd multilayer 2 hours!!!! 
    So the poor hp laptop -dual core i2 4gb ram, has been begged to it knees! And simply cant handle it of course! and it have just trough time benn loaded with lots of crap, and is extremly noisy, heat, slow, anoying = unusable!
    SO hwat i need is...
        (-THE SHORTER) :
    A computer setup that will EASILY! could handle stuff like that  (avchd, multilayer, 2 hours project) -and simmilar. A total power machine! But Im tired of windows! And ugly cheap looking design! The times have changed and i change with them!
    NOW I WANT APPLE!! 
    But but but... Hwat should i get????
    1. Im NOT a billionare!
    2. I repeat: NOT a billionare!
    3. I also need portability for every day use beyond the hardcore creative editing and use
    AT LAST:
     i saw in front of me this genius plan... With a macbook pro, a tuned one, with as much of ram,cpu,gpu, and everything else as it can posibble have
    -the perfect combination of transportabillity, everydayuse and total power!
    When it gets combine with,
    A cinemadisplay
    A extra keyboard
    And a extra magic mouse
    And this power macbook pro, with screen, mouse, and keyboard i've found a really good offer at.
    MY ACTUAL QUESTION.... :
    Now it is yours turn to please! be creative! Please! Hwat does all you genius heads! think and say?
    WILL A super tuned MACBBOK PRO COMBINED WITH ACCESSORIES, AT ALL, BE ABLE TO REPLACE A STRONG MAC PRO, OR AT LEAST BE MORE THAN ENOUGH FOR REALLY HEAVY STUFF? And if yes, HOW strong actually (ram,cpu,gpu...) will it need to have to be "more than enough"?
    If no, what would all of  you then suggest that is perfect in relation to everything?
    PLEASE ANSWER!!

    Jonatan R. wrote:
    WILL A super tuned MACBBOK PRO COMBINED WITH ACCESSORIES, AT ALL, BE ABLE TO REPLACE A STRONG MAC PRO,
    No,
    the MacPro is the muscle machine and not constrained by power or cooling limitations like the MacBoo Pro is.
    OR AT LEAST BE MORE THAN ENOUGH FOR REALLY HEAVY STUFF?
    If you press the MacBook Pro like a desktop machine, it will blow fans like a hurricane but will do the job eventually.
    The longer you blow fans on a laptop, the sooner it clogs up with crippling dust and shortens the life of the machine.
    You'll need the top end 15" or better, not the 13" as it has no dedicated graphics, only CPU graphics.
    Preferably if you just now getting into video, you should be considering Avid on a Windows 7 tower, it's because Apple has been ignoring the MacPro for hardware updates to improve it and it seems like they don't want to carry it anymore. Also the last Final Cut Pro version had Hollywood up in arms as Apple removed a lot of required abilities to make it more "consumer friendly" which upset the Pro market who likes control.
    Apple is focusing on the consumer computing market and getting away from the "Pro" market which needs the heavier hardware to handle video needs. They stopped selling the X-RAID and the X-Server, so Apple really isn't a "computer" company any longer.
    Sure you can use a MacBook Pro and a external monitor for doing home movies and such occasionally, but if your into serious production you need to consdier other options now.
    There is nothing wrong in getting a MacBook Air and a Windows 7 professional video tower too.

  • Where can I find the Start up disk and how can I delete file from it.

    where can I find the Start up disk on theMac Book Air?
    How can I delete files from it?

    The startup disk is the internal SSD in your MBA.  You may delete files by draging the file  to Trash (or clicking on them and then execute COMMAND+Delete).  Then empty Trash.
    Ciao.

  • When I try to start outlook for mac, i get the message that there is an old version of the Microsoft Database Daemon that needs to be deleted from the start up files. Where do I find the start up files???

    when I try to start outlook for mac, i get the message that there is an old version of the Microsoft Database Daemon that needs to be deleted from the start up files. Where do I find the start up files???

    In the Users & Groups pane of System Preferences.
    (66105)

  • Photo Start where left of

    if I happen to have few hundred photos in few folders and I stopped viewing to do another task and I cam back to continue viewing; why I cannot start where I had left off.
    Is there a way of doing that or any plans to do it or at least have a bookmark where I had stopped.

    While I forget the exact details, the iPod will pick up where it left off if woken up within a certain amount of time. If it is asleep for a long time, like a full day, it goes into essentially an off state requiring more of a full restart rather than waking up.
    Where is that info.... here it is...
    http://docs.info.apple.com/article.html?artnum=60945
    So after 14 hours it is supposed to go into Hibernation and will wake from hibernation to the same state as when it went into hibernation.
    However my own experience tends to mirror yours where after a day, it starts up at the main menu like you rebooted it, not at the last song in a playlist you were playing.
    Patrick

  • Where does a rookie upgrader start?

    I upgraded my oracle apex xe to 3.1 and now I am lost
    Where do I begin.
    I went to go to database home page but now it
    ask for workspace, username and password.
    What workspace, username and password do I use here.
    I was following link
    http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10498/setup_env.htm#CCHEEADE
    and thought I should log on to the following but nothing came up.
    http://howie-pc:8080/apex/apex_admin
    http://howie-pc:7777/apex/apex_admin
    Where does a rookie upgrader start once they have upgraded?
    Howard

    Howard,
    Since you are upgrading the XE version, you should read this page:
    http://www.oracle.com/technology/products/database/application_express/html/3.1_and_xe.html
    There are installation instructions at the bottom of the page.
    It sounds like you didn't run the apxldimg.sql script. It upgrades the images and javascript files.
    Doug

  • B40 30 all in one- where can i enable fast start?

     where can i enable fast start and why doesthe resolution in control panel not change to preffered setting?

    hi gt472099,
    Welcome to Lenovo Community Forums!
    You can check this link for the steps.
    You can go with Step one
    http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Start where left off

    I just got my Ipod. 5th generation 30 GB. The only thing I have not been able to figure out or find in the help files is how to start up the Ipod where I left off the previous day. Please help.
    Thank you kindly

    While I forget the exact details, the iPod will pick up where it left off if woken up within a certain amount of time. If it is asleep for a long time, like a full day, it goes into essentially an off state requiring more of a full restart rather than waking up.
    Where is that info.... here it is...
    http://docs.info.apple.com/article.html?artnum=60945
    So after 14 hours it is supposed to go into Hibernation and will wake from hibernation to the same state as when it went into hibernation.
    However my own experience tends to mirror yours where after a day, it starts up at the main menu like you rebooted it, not at the last song in a playlist you were playing.
    Patrick

  • Fails then starts where it left off? No it does not!

    I am very frustrated with TC. I just bought it yesterday and have been trying since then--almost 24 hours to do my first back up. It has failed three times and I have spoken to applecare twice about it. Each time I have to restart the whole process again even though it clearly says that the TC should start where it left off if it stopped unexpectedly. This is so annoying and frustrating! Hours, and hours wasted!

    Are you performing your backup wirelessly or via ethernet? It's suggested to connect via ethernet for the first backup and switch to wireless for following backups.
    The reason it doesn't pick up where it left off is that the first backup needs to complete. I think that only happens after you complete the first backup. If the initial backup is interrupted, the sparsebundle file becomes corrupt and the backup needs to be started over. It's probably best to delete the sparsebundle file before backing up again.

  • Scrolling with mouse wheel in column browser starts from the start of the list

    Hi, I'm wondering if anyone else has been encountering this problem with iTunes.
    Ever since updating to 10.5, whenever I use the mouse wheel to scroll in the column browser, it starts from the start of the list, regardless of which artist or album is highlighted.
    For instance, I press the M key to jump to artists starting with M, then use the mouse wheel to scroll down the list, in iTunes 10.5 it jumps me back to the As.
    The strange thing is that if I then use the mouse wheel to scroll down to the Cs, then jump down the list via a key press, mouse wheel scrolling will start me back to where I last scrolled (C).
    How can I fix this problem?
    I'm using iTunes 10.5.0.142 on Windows 7 Home Premium.

    I can confirm the behaviour. It would seem iTunes is keeping a separate record of the position in the list for use by the scroll wheel, and then snapping to that before scrolling up or down a screenful. The same random jumps happen if you use the keyboard Page Up/Page Down commands and then use the mouse wheel.
    I shall file a bug report.
    tt2

  • Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]

    I'm using Oracle Linux 6u6. While I'm installing openstack ( 2 node set up) using packstack, I'm getting this error:
    Applying 10.245.33.37_cinder.pp
    10.245.33.37_keystone.pp:                         [ ERROR ]
    Applying Puppet manifests                         [ ERROR ]
    ERROR : Error appeared during Puppet run: 10.245.33.37_keystone.pp
    Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
    You will find full trace in log /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
    Please check log file /var/tmp/packstack/20150327-100335-ltC8Ic/openstack-setup.log for more information
    Additional information:
    * A new answerfile was created in: /root/packstack-answers-20150327-100336.txt
    * Time synchronization installation was skipped. Please note that unsynchronized time on server instances might be problem for some OpenStack components.
    * Did not create a cinder volume group, one already existed
    * File /root/keystonerc_admin has been created on OpenStack client host 10.245.33.37. To use the command line tools you need to source the file.
    * To access the OpenStack Dashboard browse to http://10.245.33.37/dashboard .
    Please, find your login credentials stored in the keystonerc_admin in your home directory.
    Packages:
    [root@slcai461 ~]# rpm -qa|grep keystone
    python-keystoneclient-0.9.0-5.el6.noarch
    python-keystone-2014.1.3-2.el6.noarch
    openstack-keystone-2014.1.3-2.el6.noarch
    [root@slcai461 ~]# rpm -qa|grep packstack
    openstack-packstack-puppet-2014.1.1-0.12.dev1068.0.4.el6.noarch
    openstack-packstack-2014.1.1-0.12.dev1068.0.4.el6.noarch
    Log :
    [root@slcai461 ~]# cat /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
    Warning: Config file /etc/puppet/hiera.yaml not found, using Hiera defaults
    Warning: Scope(Class[Keystone]): The sql_connection parameter is deprecated, use database_connection instead.
    Warning: Scope(Class[Keystone]): token_format parameter is deprecated. Use token_provider instead.
    Warning: Scope(Class[Keystone::Endpoint]): The public_address parameter is deprecated, use public_url instead.
    Warning: Scope(Class[Keystone::Endpoint]): The internal_address parameter is deprecated, use internal_url instead.
    Warning: Scope(Class[Keystone::Endpoint]): The admin_address parameter is deprecated, use admin_url instead.
    Warning: Scope(Class[Nova::Keystone::Auth]): The cinder parameter is deprecated and has no effect.
    Notice: Compiled catalog for slcai461.us.oracle.com in environment production in 1.60 seconds
    Warning: The package type's allow_virtual parameter will be changing its default value from false to true in a future release. If you do not want to allow virtual packages, please explicitly set allow_virtual to false.
       (at /usr/lib/ruby/site_ruby/1.8/puppet/type.rb:816:in `set_default')
    Notice: /Stage[main]/Keystone/Keystone_config[DEFAULT/admin_token]/value: value changed '[old secret redacted]' to '[new secret redacted]'
    Notice: /Stage[main]/Keystone/Keystone_config[database/connection]/value: value changed '[old secret redacted]' to '[new secret redacted]'
    Notice: /Stage[main]/Keystone::Db::Sync/Exec[keystone-manage db_sync]: Triggered 'refresh' from 3 events
    Notice: /Stage[main]/Keystone/Exec[keystone-manage pki_setup]: Triggered 'refresh' from 2 events
    Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
    Wrapped exception:
    Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
    Error: /Stage[main]/Keystone::Service/Service[keystone]/ensure: change from stopped to running failed: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
    Notice: /Stage[main]/Keystone::Service/Service[keystone]: Triggered 'refresh' from 5 events
    Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Skipping because of failed dependencies
    Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Skipping because of failed dependencies
    Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Skipping because of failed dependencies
    Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Skipping because of failed dependencies
    Error: Could not prefetch keystone_endpoint provider 'keystone': Execution of '/usr/bin/keystone --os-endpoint http://127.0.0.1:35357/v2.0/ endpoint-list' returned 1: An unexpected error prevented the server from fulfilling your request. (HTTP 500)
    Notice: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Skipping because of failed dependencies
    Notice: /Stage[main]/Main/Keystone_service[cinder_v2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Main/Keystone_service[cinder_v2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Skipping because of failed dependencies
    Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Skipping because of failed dependencies
    Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Skipping because of failed dependencies
    Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Skipping because of failed dependencies
    Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Skipping because of failed dependencies
    Notice: Finished catalog run in 3.10 seconds
    Please let me know how to fix this.

    This problem connected with proxy-setings.
    As the first steps you should try:
           1.  export system env variable:
    http_proxy=http://www-proxy.ru.oracle.com:80
    https_proxy=https://www-proxy.ru.oracle.com:80
    no_proxy=127.0.0.1,localhost
    and you can also export
        export OS_TENANT_NAME=admin
        export OS_USERNAME=admin
        export OS_PASSWORD=root
        export OS_AUTH_URL=http://<conntroller_IP>:5000/v2.0/
    2. and than restart mysqld, if it is running, stop iptables and repeat installation process from beginning with the currently generated answer file
    if we are exporting variable OS_PASSWORD, its value should be the same as value for CONFIG_KEYSTONE_ADMIN_PW in the currently generated answer file.
    This OS_PASSWORD will be written by packstack in the /root/keystonerc_admin file and will be used as admin's password for login to  Openstack dashboard.

  • I have a 2009 A6 with a 5th Gen. iPod. I mostly listen to audio bks, not a lot of music. Often, the MMI starts on the first song on my iPod, therefore I don't know where I stopped in my 4-6 hr book.  How can I get MMI to start where I left off?

    I have a 2009 A6 with a 5th Gen. iPod pluggedinto the MMI.  I mostly  listen to audio books, not a lot ofmusic.  The books are 4-6 hours long, vs 4-6minutes with a song.  Often, but not always, when I start my A6, the MMI starts on the first song on my iPod, thereforeI don't know where I stopped in my 4-6 hour book.  How can I get the interface to stay stopped where I left off?  I have gone into iTunes and placed my current book as the first "song" on my iPod for ease of finding it, but often the MMI starts it over at the beginning.  Thank you if anyone has any experience with this.  My dealer in San Rafael, CA says they've never heard of this issue. 

    I think my iPod, which is an iPod touch 3rd generation , which is a lot different from a nano, which really makes it almost impossible for me to help you, which is why I suggested that you post your question in the iPod nano community.  Your first post says that your product is an iPod nano. I think the people who answer those questions would be most likely to help you. If yours isn't a nano then you can pick the right community from here. This community is really to answer questions about this forum, or issues that don't fit anywhere else.
    laverne's mom
    Message was edited by: laverne's mom

  • How can I bookmark, in iTunes, so that the songs I play and then stop in middle of song then come back later - it will start where I left off.  What is the switch in iTunes to make this happen?  Thank You

    In iTunes I would like to set it to bookmark where I am holding in a song on my iPOD.  Let's say I want to play a song that I listen to yesterday and stopped playing it in the middle on my iPOD.  Today, I want to listen, on my iPOD, to the same song and have it start playing where I left off yesterday.
    Can someone please tell me what I have to do in iTUNES to have this feature on my iPOD?
    Thank You
    Dovid

    iTunes does not have provision for automatically storing one kind of media on a separate drive, so you have some basic decisions to make first.  Do you want these movies to still appear in your iTunes library, or are you content with browsing filenames on a drive in Finder when you want to look for one?  The second's the easiest thing because then you don't have to have an external drive permanently turned on and attached to your computer (wired or wireless).  To do that you literelly only need to drag your movies folder to an archive drive and delete movies from iTunes.  To watch them again you can add it back to iTunes while holding down the option key so the movie is used from its location on the external drive.
    There's ways to move the movies to an external drive while keeping them in iTunes but the external drive iwll always have to be turned on and connected to the computer or you will see a bunch of broken link exclamation marks.
    Realize what you are talking about is not "backup".  Backup (which you should do) is putting a second or more copy of items on external drives for the day when your internal drive fails and everything on it is lost, inclduing all your home photos and perhaps things that have been pulled from the iTunes Store and can no longer be re-downloaded.

  • Where can i find the start up log?

    when arch boot's up the deamons i get a [Failed] but it goes so fast.. and the boot is on 1024X768 so i cant see who failes... and then when x start's it clears the console.
    where can i find the boot log file? (i looked in /var/logs i have no idea which one)
    thanks

    MadTux wrote:dmesg: boot messages generated by the kernel
    /var/log/daemon.log: messages generated by daemons
    /var/log/kernel.log: messages generated by the kernel
    MadTux:  None of the above log files have the same information in them as a traditional "boot.log"
    Depending on what you're looking for, dmesg and the like are often no help whatsoever.

  • An error occurred while trying to start Isengard - Cannot start Wily IEM

    Dear SAP,
    I have installed Wily IEM 8.2.2.0 in my Solution Manager server (windows 2008).
    I can start the service Introscope Enterprise Manager, but in the log, I get this error :
    INFO   | jvm 1    | 2011/01/04 10:25:31 | Introscope Enterprise Manager failed to start because:
    INFO   | jvm 1    | 2011/01/04 10:25:31 | An error occurred while trying to start Isengard.
    INFO   | jvm 1    | 2011/01/04 10:25:31 | Press 'Enter' to acknowledge....
    1. I have assigned SIDuser to the service
    2. I have also read and apply 1273028 OSS recommandations.
    Thanks for your help.
    Best regards
    SAP NetWeaverAdmin

    Dear Everyone,
    I got the same error. Today, I checked the log and it said something about Display 0.0. I guess the EMCtrl only works on graphical environment and I think I'm right. I run ./EMCtrl.sh through xmanager and it started and still started.
    Maybe SAP create the scenario incorrectly by assuming the wily introscope can only be started on graphical environment. This is not wily introscope mistake, because if I install the wily manually, I can start it from ssh.

  • Jdbc sender adapter  hangs and starts showing "Processing Started" forever

    Dear ,
              We are facing some issues with jdbc sender adapter channel on production system
              Environment : XI 3.0 SP 20 + HP-UX 11.23 ia64 + Oracle 10.2
    Sometimes it hangs and starts showing "Processing Started" forever on communication channel monitoring .
    There is no error log for this.
    If i stop it and then start it , no use.
    If i copied this to a new one then it works.
    I have found few SAP note like 1078420,1083488 , but my system is already at higher patch level.
    Can you please advise me something as we are facing in production frequently.
    Regards,
    Sandeep

    Hi Sandeep,
    This problem even we too faced in our project and thought of many stupid things finally found that the JDBC adapter is LOCKED.
    Check in the Visual Admin >Cluster> "LOCKING ADAPTER"
    we get a option of Display Locks .Check for an entry with
    NAME : $XIDBAD.JDBC2XI
    reset the locks and restart the CC ,now it works fine.
    Note 1083488 - XI FTP/JDBC sender channel stop polling indefinitely(04/04S)
    Thanks
    Sudharshan

Maybe you are looking for

  • How do I install Premiere Elements 9 on my iMac?

    I cannot install Premiere Elements 9 on my new iMac from the DVDs I own and successfully used to install Premiere Elements 9 on my old PC with Windows 7.  The DVD auto-ejects and I get 5 warnings ("WARNING; Payload cannot be installed due to dependen

  • Is it possible to use external testing tools in SAP XI

    Hi, I have been working on file to file transfer of large size more than 1 GB. I have many doubts like: 1.Can I use Data compression techniques so that my files can be processsed(my scenario involves a lot of mapping) 2.Can any of the engines be stop

  • FCP Export Using... vs. stand-alone Compressor

    Hi I have a 90 minute HD sequence in FCS2, which I'm now building test DVDs from. Not having used Compressor, I'm wondering which of the following workflows people recommend: - In Final Cut, Export Using Compressor, set up preset, and submit; or - In

  • Extended program check and code inspector

    Hi Gurus, I developed on report . I wrote at end of  and at new in loop but extended code checking it showing one error  is: 1)The LOOP statement processing will be limited   (FROM, TO and WHERE additions in LOOP)   Interaction with group change proc

  • Javadoc for pl/sql

    Hallo, does anybody know a tool that automatically generates code documentation for pl/sql like javadoc does for java? If not, are there any guidlines or best-practices how to document stored procedures or functions in pl/sql? Thanks for any help, Mi