Where to submit DPM feature improvement requests?

Where's the best place to submit DPM product "improvement" requests to Microsoft for their consideration?

Hi Mike,
Please accept the following feedback:
When DPM writes SQL databases from replica to tape, it rewinds the tape after every database, causing needless wear on the tape and tape drive.  Today DPM is writing SQL databases to the end of a tape (at approx. the 2TB mark on an LTO5 tape),
and it's taking over 10 minutes of tape travel time for a 5MB database, then another 13 minutes for the next 4MB database.  In the last three hours it's written 16 databases, taking over 10 minutes each time, their total size is less than 90GB,
and DPM rewound the tape after every database. 
Please review the tape handling to ensure needless tape rewinding does not occur. We want SQL (and other) tape backups to stream data to the drive continuously until the tape is full.

Similar Messages

  • Where to submit a feature request concerning an application (Mail) that doesn't appear in the feedback section?

    Hello.
    I (and I suppose many others) have a very, very obvious and needed feature to request about Mail.app. As far as I understand, usually such requests go into the feedback section (http://www.apple.com/feedback/). But while even iCal appears on that page, Mail.app doesn't—a fact as bizarre and incomprehensible as the lack of the feature to request. (Namely: Mail allows to set rules for outgoing messages, but it doesn't execute them (obviously a coding error, one that persists since the very first version of Mail. If Mail isn't supposed to allow rules concerning outgoing messages, then it's a mistake to make setting such rules possible; but can anyone think of a sensible reason to disallow such rules?). This is very, very annoying, and it's equally annoying that apple fails to include this application into the feedback page. It's almost like they don't want us to use it.)
    Well. Anybody any idea how to get this through to them?
    Thanks.

    You can submit feedback for the application to the operating system feedback as a start, that is, submit to the Mac OS X that you are using.
    One does wonder why there is not a separate category for something as heavily used as mail, but...

  • Where To Post Product Feature/Improvement Suggestions

    Hi,
    I have a bunch of suggestions for product improvements and new features (mostly security-related) that I would like to send to Apple development teams. Do I post it in the discussion forums or do I e-mail it to Apple ? If I have to e-mail it, what's the address ?
    Thanks

    Hi bartron2007!
    Go here Product Feedback.
    And note "Please read Apple's Unsolicited Idea Submission Policy before you send us your feedback."
    ali b

  • Display xml documents - how to submit a feature request?

    Safari is useless when it comes to render raw xml documents. You have to view the actual source to see the xml.
    Is there an official way to submit a feature request for safari to apple? I would love to see something similar to what firefox does with xml. Safari is such a fast and nice browser, if it only could handle text/xml better...

    As you said Safari simply shows all xml element content concatenated together. But no tags or attribute values. If the ContentType in the http header is set to text/xml Firefox shows an xml tree that you can nicely browse. I think IE5+ and Opera do that too. It is important to set the right content type though. Here is an example that shows nice in FF, but is unreadable in Safari:
    http://ww3.bgbm.org/biocase/pywrapper.cgi?dsa=Herbar
    Sure you can look at the source code, but the xml might not be pretty printed.

  • How to submit a Feature Request

    Anyone know how ot submit a feature request to the Mail team?  I'm so tired of inline attachments.  I feel like I'm using a mail client from the mid 90's.

    See > http://www.apple.com/feedback

  • Flex Sample application - where to submit ?

    Flex Sample application - where to submit ?
    Hello, we have developed a Flex based CMS which I bielieve
    deserves to be featured as sample application on the Adobe site.
    The problem is - we can't find any informationwhere to submit the
    URL ? Can anyone help please.
    Martin

    here you go - >
    www.martinkonrad.com.au/cms_dev

  • How do i submit a product improvement suggestion

    How do I submit a product improvement suggestion for the iPhone?

    Apple does not accept input from the general public.  They advise AGAINST it.
    http://www.apple.com/legal/intellectual-property/policies/ideas.html
    Apple or any of its employees do not accept or consider unsolicited ideas, including ideas for new advertising campaigns, new promotions, new or improved products or technologies, product enhancements, processes, materials, marketing plans or new product names. Please do not submit any unsolicited ideas, original creative artwork, suggestions or other works (“submissions”) in any form to Apple or any of its employees. The sole purpose of this policy is to avoid potential misunderstandings or disputes when Apple’s products or marketing strategies might seem similar to ideas submitted to Apple. If, despite our request that you not send us your ideas, you still submit them, then regardless of what your letter says, the following terms shall apply to your submissions.
    TERMS OF IDEA SUBMISSION
    You agree that: (1) your submissions and their contents will automatically become the property of Apple, without any compensation to you; (2) Apple may use or redistribute the submissions and their contents for any purpose and in any way; (3) there is no obligation for Apple to review the submission; and (4) there is no obligation to keep any submissions confidential.
    PRODUCT FEEDBACK
    Apple does, however, welcome your feedback regarding many areas of Apple’s existing business. If you want to send us your feedback, and we hope you do, we simply request that you send it to us using the form found at www.apple.com/contact, or you can choose from the many other listed areas for your feedback. Please provide only specific feedback on Apple’s existing products or marketing strategies; do not include any ideas that Apple’s policy will not permit it to accept or consider. It’s just one more way that Apple can learn how to best satisfy your needs.
    Feedback and Information
    Any feedback you provide at this site shall be deemed to be non-confidential. Apple shall be free to use such information on an unrestricted basis.

  • Where is save as feature on Lion ?

    Where is save as feature in Lion ?

    I understand that in Mountain Lion (10.8), Save-As is back - but it is a HIDDEN feature. To be honest, I never got used to the Duplicate function in Lion, so I am thrilled that this may be back - it was in the beta version of Mountain Lion.
    Do a Google search to find the article that discusses this - if I recall, I read it on Gizmodo. Once you find it, I think you can turn it on so that Save-As is a permanent feature, or one accessible via the Control or Option keys.
    Best of luck! I am thrilled!

  • Missing / deleted history - 'New and improved' releases add new features, improved (?) function, but eliminate some options and browsing history...

    This has been a problem ever since updating from Firefox 8 to FF 10. I noticed that there was about a month missing from my history after that update. Checking my settings in 'about:config', there was no change in 'browser.history_expire_days_min' or 'browser.history_expire_days.mirror'. The value has been set at '720' ever since installing FF 3.6 over three years ago.
    Admittedly, I don't install new updates the moment they become available... However, every time that I've installed an update, more and more of my history simply vanishes. Not a few days or weeks, mind you. but 3, 6, and even 9 months of history GONE!
    I just don't understand why this option was eliminated from Privacy Preferences, forcing users to tinker with the settings in 'about:config' instead. Since users are given a warning before going on to the settings page, why would any programmer think this is a good alternative to the Preferences pane???
    Now I'm down to history for February and March of this year... You can bet that I'm not going to be updating to any new releases for a very long time, if ever.
    It seems that 'software bloat' isn't a 'Microsoft-only' disease...
    New 'features' + 'improved' perfomance = New demands for disk space + improved glitches...
    Frankly, I'm getting sick of this...

    Not sure if it is relevant but the structure of the places.sqlite database changed recently, and jumping all the way from fx3.6 to fx18 or 19 could conceivably have been a factor. It is best to keep Firefox up-to-date.
    Glad at least that you keep backups.
    History backups are slightly problematic, because if the places.sqlite database is backed up and restored to an old copy the bookmarks then regress. As you will be aware already, Firefox itself makes no History backups, and has no facility to restore History only.

  • Where can I find the deleted request.

    Hi Experts,
    I have a general question. In BW 3.5 version in which table we can see the deleted requests.
    Just like the table RSICCONT where we can find the available request in the data target.
    Thanks in advance
    Narendra.

    Hi......
    Check the following table......it may help u......
    Table for deleted Request
    Also check ..............
    http://sapbwneelam.blogspot.com/2007/08/bw-useful-tables.html
    U can also try to search in the table DD02L.........this table contains list of all tables........
    Regards,
    Debjani....

  • Where can we see the deleted requests from the DSO

    Hi all, i have deleted a red request in the DSO , which stopped the process chian, so i manuallly loaded DTP and activate , repeated the pc and its fine now, but i need the information regarding the red request i deleted from the requests tab, can u please help me finding where can we see the deleted requests from the DSO, thanks in advance...

    Hi Raghu,
    Open the PC in SE38,goto PC logs on which day DTP failed.right click on DTP-->select Process monitor
    Click on filter buttor>select last oneweek>Execute
    Then select the failed request(It shows status as deleted) You find the details here itself -->take the request number from this
    goto RSRQgive req id>Execute
    Hope this helps.
    Regards,
    Venkatesh.

  • Where did my NOTES feature go on Mavericks?

    Help! Please! Where did my NOTES feature go now that I've upgraded to Mavericks?

    Notes are no longer part of Mail. They are in a separate app now.
    They've been "axed."

  • GRC10 Access control-how/where to check if an approval request email was sent?

    Hi experts
    Please could you let me know how/where to check if an approval request email was sent?
    I some approvers complaining that they havent received the approval request email from GRC.
    Please advise.
    Thanks
    Ran

    Hi Ranjit
    I tested it as well by stripping the access back and then used STAUTHTRACE (much nicer than ST01). You are right - it is asking for S_DEVELOP 02 DEBUG
    METHOD check_admin_auth .
       DATA: lo_message_manager TYPE REF TO if_wd_message_manager,
           lo_api_controller TYPE REF TO if_wd_controller,
           lr_auth_node TYPE REF TO if_wd_context_node.
       lo_api_controller ?= wd_this->wd_get_api( ).
       lo_message_manager = lo_api_controller->get_message_manager( ).
       lr_auth_node = wd_context->get_child_node( name = 'AUTH' ).
       TRY.
           cl_grfn_msmp_authorizations=>check_sap_debug_authorization( ).
           lr_auth_node->set_attribute(
              EXPORTING
                value =     'X'
                name  =     'CAN_RUN'
         CATCH cx_grfn_msmp.
           MESSAGE e197(grfnmw) INTO cx_grfn_msmp=>m_msg_str. ----> E197 (GRFNMW) matches the error msg
           lo_message_manager->report_t100_message(
        METHOD check_sap_debug_authorization.
       AUTHORITY-CHECK OBJECT 'S_DEVELOP'
                 ID 'DEVCLASS' DUMMY
                 ID 'OBJTYPE'  FIELD 'DEBUG'
                 ID 'OBJNAME'  DUMMY
                 ID 'P_GROUP'  DUMMY
                 ID 'ACTVT'    FIELD '02'.
       IF sy-subrc NE 0.
         MESSAGE e219(grfnmw) WITH sy-uname INTO cx_grfn_msmp=>m_msg_str.
         grfnw_msmp_raise_msg: cx_grfn_msmp_no_authorization.
       ENDIF.
    ENDMETHOD.
    I recommend raising a customer incident with SAP to get their input as I don't think DEBUG should be necessary for MSMP Instance Runtime - and then let us all know the outcome
    Regards
    Colleen

  • Where is the "variations" feature in photoshop for adjusting color?

    where is the "variations" feature in photoshop for adjusting color?

    There is also a forum for Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • New to PE 12. Where is the "Browse" feature?

    I had to get a new computer to replace my XP unit before MIcrosoft support ended and this meant an upgrade to PE 12. Prior to this upgrade I was using PE 2.0 (What can I say, PE 2.0 was great software and it worked flawlessly for many years).
    Problem: Where is the "Browse" feature on PE 12?  I don't want to "Import" photos into collections, I just want to manipulate, move, and edit my photos straight from my computer's File Manager like I did on PE 2.0. I use a version of Photoshop CS for work and it offers "Adobe Bridge" that offers this functionality.  Is there a function like this on PE 12?
    Any info would be appreciated.  Thanks much!

    PSE12 comes with Organizer, not a browser. However you don’t need to use Organizer. Simply continue with Bridge and right click on thumbnails and choose:
    Open With >> Adobe Photoshop Elements Editor 12.0

Maybe you are looking for