Where Used in Production System

Where Used in our dev system retrieves a related custom ABAP for able T179. However, when I do the same where used for table T179 in Prod it does not? Anynbody know whats going on?  Thanks.

I found the whole where-used stuff to be somewhat shaky in releases after 4.6C - I'm sure there's a bunch of OSS notes dealing with the topic, although I never looked.
To help it a little, display your custom code in the ABAP Editor, and click on Utilities > Update Navigation Index. The system will then rebuild all the references, and your code will appear in the where-used analysis of the table.

Similar Messages

  • SAP B1 Where used in Production Orders

    Hello,
         Would anyone be able to share a query that will search items used in Production Orders? 

    Hi Michael,
    Not getting exact requirement, Explain more.
    Please check below link.
    Where Used in SAP B1
    Hope this helps
    Regards::::
    Atul Chakraborty

  • Where-used list for system aliases?

    Is there a way to get a list of all the iViews that reference a particular system alias (or better, a set of system aliases?). Possibly by querying the database?
    Thanks,
    Sean

    Hi Sean,
    Yes there is a TRICKY way to do it with standard SAP Portal functionality.
    But again this is tricky and you must keep sharp all the time.
    1. In the Portal goto: Content Administrator > Multiple Property Replacement
    2. Right click on the folder Portal Content (or one of its sub-folders); and select the action "Add folder to list"
    3. click next in the wizzard
    4. you should now be on step 2 of the wizzard and only select/check iViews
    5. Select the 2nd radio button "Search objects by property ID"
    6. in the field Property ID you must fill in "System" (without the quotes)
    7. in the field New Value you can fill in anything as it is not used, but you must fill in something, like TEMP
    8. click next in the wizzard
    --- this takes a while as it queries all iViews for the property "System" ---
    9. this screen will show you a statistic overview, like a headcount, but you cannot use it for a 1-on-1 chek yet
    10. click next in the wizzard
    11. this screen will show two containers left and right where you can select object
    --- DO NOT click next anymore from this point on ---
    12. with your mouse or ctrl-a select the contents of the right container and paste it into Excel.
    Now you have a list of all iviews that have a system property and the value of that system property.
    13. Cancel/Abort the Wizzard!....
    Cheers,
    Benjamin Houttuin
    Edited by: Benjamin L.F. Houttuin on Jul 7, 2010 12:35 PM

  • SOLMAN 7.1 Assigning Hana database Technical system to product system

    Hi All,
    I am trying to assign a HANA database technical system to Product system.
    I am trying to do it in conventional way (i.e in LMDB TCODE--> Selected Product system-->Assign Technical system--> ).
    But I am getting below error.
    No local proposals; search remotely in SAP SMP (time-consuming).
    So wanted to know whether there is any other way for assigning Prodcut system to HANA DB Technical system.
    Please find the screen shot for the error message.
    Thanks & Regards,
    Solman Starter

    You can either use a product system that already exists for the ABAP system (if the ABAP system was already connected to Solution Manager) or create a new one. After all you should use the same product system for ABAP and HANA.
    Check this for further reference -
    Managed System Setup of HANA in Solution Manager 7.1 - SAP Solution Manager Setup - SCN Wiki

  • BOM Where used list

    Hi All,
    Is there any report of BOM which will suffice the requirement like if am putting any level of component like where used list the system will display the highest level of material.
    e.g
    'A' having component X , Y AND Z
    'X' having compnent P Q and R
    P having component L, M and N.
    if am putting component to search what is the highest level of assembly material, for my requirement i required it should give display of materail 'A'.
    I had gone through where used list report CS15 but which is giving only header of the selected component and my requirement it give top material of the assembly.
    Plz suggest its urgent.
    Regards,
    Rajesh

    Hi,
    Probably it is not possible to have this in Standard SAP.
    You need to consider Custom report for this.
    In your case you wanted the diplay of Header Material.
    Say, your BOM is having 10 level structure and you wanted to have the 8/9th Level Material as input in your report and you wanted the Header Material (Lowest Level) as output.
    You need to conider the Low Level Code of the Input Material.
    One more thing is this same component may be part of some other Materials as well.
    Hope this helps in decision making and some sort of Logic to build the regport..
    Regards,
    Siva

  • Use 'se38' to set variants with long time no-response in production system?

    hi,Guys,  When I use 'se38' to set variants with long time no-response in production system?
    I think it's none of business with program performance.  Maybe system response delay, But no other program like the same response happened?
    best regards

    Hi,
    what's your problem? Didn't get the point.
    You have a report, where the maintenance of the selection variant has a long runtime (in production?)
    Maybe AT SELECTION screen some checks / helps are executed, which are quite fast in DEV, but access much bigger tables in PROD and need to much time. Such checks should be improved / moved after START-OF-SELECTION.
    Regards,
    Christian

  • I am a high school teacher.  My district purchased the entire CC Suite.  Where can I find a tutorial in book form to learn how to use your products?  Do you all provide free book samples to teachers?

    I am a high school teacher.  My district purchased the entire CC Suite.  Where can I find a tutorial in book form to learn how to use your products?  Do you all provide free book samples to teachers?

    Good day!
    This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by. (edit: Actually they are more likely to frequent the regular Photoshop Forum.)
    Regards,
    Pfaffenbichler

  • Can i use SWWL to stop a sync send in IP,  in production system

    hi forum,
    in a scenario of mine, theres a BPM and in the BPM there is  a sync send to a rfc function module,
    after the scenario ran, i can see in the PE, workflow, that the scenario is hanging in the synchronous send step for 3 days 15 hours, and has not yet returned the response....
    i could identify the problem ...because in the SXNB_ADM runtime parameter, HTTP_TIMEOUT , the current value is 2700000, which comes out to be some 31 days......
    may be due to this the step is still waiting,
    how can i stop the process, 
    can i stop the IP using SWWL, will there be any proble,
    coz its in PRODUCTION system......

    Hi Sudeep,
    if you dont have any correlation: just wait for the 31 days, nothing bad can happen. It is important, to correct the reason, so think about, to reduce the timeout and put an exception branch to the send step, which is stopping the process.
    If you have a correlation, other messages can share in the hanging process; in that case you should delete the workitem at SWWL.
    Regards,
    Udo

  • Disadvantages/risks of using (e)Catt in production systems

    Hi, in a number of documents on e(Catt) there is a warning not to use (e)Catt in production. Can anyone tell me what the risks are or the disadvantages are of using (e)Catt in production? Is there any change of database corruption using (e)Catt?
    Thx, Paul

    >
    Paul van Rossum wrote:
    > Hi, in a number of documents on e(Catt) there is a warning not to use (e)Catt in production. Can anyone tell me what the risks are or the disadvantages are of using (e)Catt in production? Is there any change of database corruption using (e)Catt?
    >
    > Thx, Paul
    Hi Paul,
    As it is an automation tool,it is advisable not to run in Production and I do not think any support will be available for same in case if it causes any issue.So,please check if any support will be avialable to you.
    Though,automation tool is reliable,it is working based on GUI concepts and it may lead to failures on various reasons.
    Hence,it is suggested not to run in production systems.
    Regards,
    SSN.

  • Product Costing related: where-used on a part and then recost every part

    Hi,
    I want to find out in SAP product costing function, is there a "where-used" function for a part number, and then able to see every product that ties to this part number; then the ability to recost those products that are tie to this part number?!
    Thanks,
    Ali

    Hi Alice
    You question is not clear. please re frame
    The product costing is done for all material by T code CK 11 N or CK 40 for material for period ex  ( every month are every 3 months like that ).
    The quantity structure that is BOM and Routing is used to do product costing to capture materials used and the activity hrs and cost for activity.
    I am clear about recosting of product??. costing is done in all company periodically.
    CS 15 Tcode will give you material where used list in BOM only.

  • Use OC4J in production system

    Hi together,
    i have a small question: Is it legal to use the oc4j in a production system or it is only for development purpose?
    Marc

    All of the licensing questions should be directed to your local sales rep, they can give you the most accurate answer.
    Hope this helps,
    Rob

  • What is the use of maestro tool &unix in BW (production system)

    Hi SAPBW guru's,
    I have one query regarding .in
    what is the use of maestro tool &unix in BW (production system) - my ponit is i schedule the query in SQ02 in back ground after wards i want to schedule in UNIX &Maestro tool ..
    PLZZZZZZZZ,help me regarding this topic ..if any wrong on my query plzzzzz forgive me..
    regards,
    goodyear..

    Hi Good Year,
    As much as I would like to help you but I think you got an <i>Off Topic</i> here. <b>Unix & Maestro Tools</b>?
    I think the <b>BASIS</b> fanatics may have more idea on this.
    Try this link as well...
    <https://www.sdn.sap.com/sdn/search.sdn?contenttype=url&selected=0&content=/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fSDN!2fiViews!2fWCM!2fcom.sap.sdn..wcm.search.search_adv%3Fprttheme%3DCSIN&SearchPluginName=sdn_all&SelectedCustomProps=resourcetype&QueryString=MaestroTool&sourceid=Mozilla-search&query=MaestroTool>
    Regards,
    --Jkyle

  • Can't reload Photoshop elements 7 on my windows 7 operating system. Everything goes well and it appears to be installing. All of the sudden the Installer starts to roll back everything and error message shows up saying I can't use this product at this tim

    can't reload Photoshop elements 7 on my windows 7 operating system. Everything goes well and it appears to be installing. All of the sudden the Installer starts to roll back everything and error message shows up saying I can't use this product at this time.

    How do I do that? I'm the only user on the laptop - I kind of assumed I already was running the install as the admin.

  • Using Tcode: OAAQ in Production system

    Hi
    Can we use Tcode: OAAQ reversing year end closing in the production system?
    Thanks,

    Hi
    You can reverse the year end closing through OAAQ. However, before doing so, please be sure if you really want to reverse the closing. Moreever, your FI Periods should also be open for your company code in T Code OB52.
    Best Regards
    Sanil K Bhandari

  • Technical Monitoring one template used for production and non-production system.

    Dear All,
    Is there a way to have one template in Solman Technical Monitoring for production system and non-production system with different alerts ? For example if it exceeds a threshold for production system it will trigger red alert or set automatically an incident and if it's non prod system it will go to yellow warning alert ?
    Regards
    Lukasz Goral 

    Hi Likasz,
    You first create and customize the template, and then assign to a system.
    If it was selecting a system and then customizing a template, then may be such functionality makes sense.
    So, I don't think that is possible.
    Better would be copy the template used for production to non-production and make the adjustment to it.
    Regards,
    Divyanshu

Maybe you are looking for