Where we can find the dimension exceeds 20% of the fact table

hi all,
we have dimension in cube if i want to make the dimension as the line item dimension. before doing that we need to find the dimension is exceeds the 20% of the fact table.
where we can find this option?
please let me know ....
thanks

hi mallikarjun,
please follow the steps:
1.Go to t-code RSRV
2.Choose "All Elementary Tests" - "Database."
3 Double-click the line "Database Information about InfoProvider Tables
4.In the window on the right, choose "Database Information about InfoProvider Tables
5.Enter the InfoCube name and choose "Execute Tests
6.. After the analysis finishes, choose "Display Messages" and open the analysis tree with the correct time stamp.
Hope this will help you
REGARDS
AMAR.

Similar Messages

Can anyone tell me where I can find a list of fields in the config file and what the various settings will do?

I don't have a problem. But there are occasionally problems that do occur that I believe I could probably fix if only I knew what the various fields in the config file were for and what their options would do. Any one have a list of fields and their possible settings?

Here's the link for all the options for about:config
http://kb.mozillazine.org/Firefox_:_FAQs_:_About:config_Entries

Can any one tell me where I can find the methodtracer class

I am trying to compile the Bean Box withing the BDK and have got to a stage where I can not compile further because I am missing the class MethodTracer.
Does anyone know where I can find this class.
Thank you

in the import statement it says that it is in sunw.demo.
But when I look there it is not there.

Unmountable_boot_volume on A10 - Where I can find a recovery cd?

All of a sudden I had a boot error - Unmountable_boot_volume and the computer refuses to boot even with safe mode. I tried with Microsoft window XP recovery and it seems that the hard drive is badly "damaged", it wont even do a directory listing and not recovering from chkdsk/r
To make the problem worse, I can no longer find the recovery disk and the window XP disk. I am just wondering if anyone can help? where I can find a recovery cd roms and the window XP OEM version disk? The computer comes with the window XP OEM licence.

Hi Robert,
You can usually obtain replacement copies of the recovery CDs from any Authorised Toshiba Service partner who will ensure that you get the correct versions for your particular notebook model.
You can find a list of available service partners on the Toshiba web-site.
regards,

Where can we find the % of diamentions to that of fact table?

Where can we find the % of diamentions to that of fact table? To decide whether to make a diamention as Line Item.

Hi,
To see the disk space used from an InfoCube you should see TCode DB02 and should sum all the involved tables (Detailed Analysis -> Object Name "<IC_NAME>"), so E, F and DIM tables.
You can use RSRV -> All Elementary Tests -> Database -> Database information about infoprovider tables to get the rows in the fact tables and dimension tables.
You can also use the program SAP_INFOCUBE_DESIGNS.
Check this link:
Re: RSRV not showing number of records
I would rather advice you to relook at the design than go in for "line-item" dimension. You can go in for line-item dimesnion only if you feel the design is correct. The disadvantage of a line-tem dim is that you can have only 1 char in the dimension and you cannot revert back a line-item dim to a normal dim unless you empty the cube.
Bye
Dinesh

Where I can find examples with OLAP DML to update the cube cells?

Hi,
Where I can find examples with OLAP DML to update/calculate the cube measure/cells?
I would like to insert data into the cube by OLAP DML.
Regards,
TomB

Not sure about examples but this is how you should proceed
1. Limit all your dimension to the leaf level values.
lmt financialperiod to '200901'
lmt geography to 'XYZ'
lmt product to 'LAPTOP'
2. Limit your measure variable to one measure(this is applicable if you have more than one stored measure in the cube).
for 10g
lmt <cube name>prtmeasdim to '<MEASURE NAME>'
for 11g
lmt <cube name>measuredim to '<MEASURE NAME>'
3. Write into the variable.
for 10g
<cube name>prttopvar = 100 -- this variable is created for a compressed & partitioned cube. for uncompressed cube the variable name is <cube name>_stored.
Thanks
Brijesh

I Upgraded to 10.8.5 but the epson perfection scan 1670 is not supported. Where I can find a driver?

I upgraded to the latest mountain Lion but my Epson perfection 1670 scan is no longer supported. I have also an HP scan but it's not like my beloved Epson! I went to the Epson site but the only thing they sad is that I have to look for an upgrade at the app store. The app store displays that there isn't any upgrade to do. The Epson support says I have to look for the ICA Image Capture Architecture of Apple...
I have no idea what is that ICA, anyway anybody knows where I can find it and download it form make my scan work?
Hope you can help.

I have the same problem. The latest update broke my Epson Perfection 1670 scanner. Image Capture would say that it is warming up and eventually would give me an error. It happened immediately after the 10.8.5 update, so I know it was the driver.
Here is how I got my scanner to work again:
Go to this folder (shift-command-G from the FInder):
/Library/Image Capture/Devices/
Look for a file called "EPSON Scanner". The new one is version 5.6.0. This one DOES NOT work.
I went to another computer that I did not update and looked for the same file. The old version that still works is 5.3.12.
I deleted the new version and copied the old one inside that folder.
Presto. My scanner is working again.

Can anyone tell me where I can find a beginners guide to the filing system?

Can anyone tell me where I can find a beginners guide to the filing system on the Macbook Air iOS 10.9.4?

So, does this mean you have given up and decided to return to the MS Windows (PC) embrace?
The link that dominic23 provided has parts 1, 2, and 3 — did you review all of these? What remaining question(s) do you have about the Apple file system?
Videos that you may find on the Apple site are not updated regularly, and steps/techniques shown in them may be outdated, or not work as shown on the current operating system release.
Did you look into the Apple Retail Store One to One learning assistance?
Did you consider either of the following books as a learning aide?
Switching to the Mac: The Missing Manual, Mavericks Edition
OS X Mavericks: The Missing Manual

I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me.

I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me as i just have to use it for couple of days till i get my mac book back from service. Can any one help me on this.

You are welcome, ameronweb.
To elaborate a bit, you may come across offers of a new/unopened/unregistered version, which is the simplest case (you would need a guarantee). Other cases require much detailed information (and a guarantee).
If upgrading to 10.6.8 or higher is an option, you could use CS6.

I think the logic/video board is bad in my 2006 iMac. Anyone know where I can find a replacement?

I think the logic/video board is bad in my 2006 iMac. Anyone know where I can find a replacement? It's a "vintage" computer, so the board is not available through Apple.

Hi,
http://www.powerbookmedic.com/iMac-17-183GHz-Core-Duo-Logic-Board-p-17532.html
http://www.ebay.com/sch/sis.html?_kw=APPLE+IMAC+17+1+8GHZ+CORE+2+DUO+661+4116+LO GIC+BOARD

I recently purchased a shutter release remote for my IPAD camera but the cord is only three feet long. I purchased a 3 banded AV extension but it doesn't work. Can anyone tell me what the correct extension cable is and where I can find one? Thanks.

I recently purchased a shutter release remote for my IPAD camera but the cord is only three feet long and I need an extension cord. I purchased a 3 banded AV extension but it doesn't work. I have been told that I need an extension cord that has AV and Mic to enable the remote shutter release to work with the extension cord. Can anyone tell me what the correct extension cable is and where I can find one? Thanks.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

I want to download Openoffice in App Store but I find others programs like Xtreme Writer and I'm not sure if it is the same. Can someone tell where I can find Openoffice official app?Thanks.

Hi I want to buy Openoffice in App Store but I can't find it. One month ago Openoffice was in App Store but now I don't find it and i need it to work. Can someone tell me if I downald Xtreme Writer or Word to go it will be the same or where I can find Openoffice? Thanks.

http://www.openoffice.org/porting/mac/

Where i can find the package "netscape.javascript.JSObject;" ??urgent

where i can find the package "netscape.javascript.JSObject;" ??urgent
please

The Java Plug-in 1.3 ships netscape.javascript in a JAR file called JAWS.JAR. To compile an applet which uses JSObject, just add JAWS.JAR in the CLASSPATH before compilation.
If you don't have the Plug-in, but do have a Netscape browser installed, you can add the java40.jar file that comes with Communicator to the end of your CLASSPATH (or extract the netscape.* classes from there).

Where I can find out the Offer created by in Oracle SSHR

Where I can find out the Offer created by in Oracle SSHR. I have to make a report with Vacancy created by and Offer created by.
I found out the Vacancy Created by.
From where We can I find out the Offer created by. from the workflow tables or EBS SSHR tables. Please help

Anil,
You would want to look at the Database Tables Reference that is part of the SAP Business One SDK Help Center Documentation to assist you with your question. Specifically look at Marketing Documents and Receipts > A/R Invoice and then at the tables OINV and INV1.
Hope that helps,
Eddy

Where i can find the document for ABAP-SD techno functional guys

where i can find the document for ABAP-SD techno functional guys

Dear Jagrut,
Well there is no separate section for technofunctional people like ABAP SD. I think it wil not be an easy proposition also to have a separate section. Regarding the documents, I have posted lot of queries on technofunctional aspect of SD and I have got good responses from the SD forum. So you can try it here.
A small search on SDN SD forum most of the times will help you to answer your query.
I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
Moreover there is a separate section of FAQs with answers which will help you in great deal.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Where we can find the dimension exceeds 20% of the fact table

Similar Messages

Maybe you are looking for