Where we will see unconstrained demand forecast

Hi gurus,
We are entering demand in Interactive demand planning(IDP), than we will run Univariate forecast after  run forecast, where we will see unconstrained demand forecast.kindly give me suggestions
Babu

Hi Babu,
what you see in DP (TX /SAPAPO/SDP94) is in fact unconstrained demand. Generally speaking the process is as following:
- You capture demand as close as possible to customer. At this stage the demand is unconstrained because at that point you do not have any idea whether your supply chain is able to satisfy this (no check of inventory, production, storage, transportation capacitiy and many other factors involved in to bring goods from A to customer). You somply capture the demand
- After running forecast you pass it to SNP and there you check the demand against your resources and capacities. The outcome of SNP should be constrained demand. At this stage it is easier to make commitment regarding delivery time and quantity. Normally you send constrained demand back to DP and compare thme (constrained against unconstrained demand)
Regards
Aban

Similar Messages

  • Where we will see structure/table SCREEN

    where i will see structure fields, i am not able to see in SE11 for SCREEN . is SCREEN is structure or table.

    SCREEN is a structue
    this acts liks a workarea , data will be populated at runtime to this structure
    chk this in debugging
    parameters : p_matnr like mara-matnr.
    at selection-screen output.
    loop at screen.
    if screen-name eq 'P_MATNR'.
         write : screen-name.
    endif.
    endloop.

  • Where we will see the out put of propotional factor

    Hi Experts,
    I have maintained in mc8v (Proportional factor)  after this where is the out put will see for  propotional factor . I have  maintained  in basic proportion is cube ,keyfigure,verion and calculate proportion maintained planning area, keyfiguer in other setting maintained selection profile. Can you tell me output where will see. how it will work. can u elaborate.
    Regards,
    moon

    Moon,
    The keyfigure that is usually updated is APODPDANT.  Find or create a view where this keyfigure is visible (that particular book must have 'manual proportion maintenance' turned on), and you can then review the results of the Prop Factor calculation by opening the planning book using that view. 
    Proportional factor will do nothing unless you have configured your planning area to use it for disaggregation, or you have included this Proportional Factor KF in one of your macros.
    http://help.sap.com/saphelp_scm70/helpdata/EN/66/29fb672fbe11d398240000e8a49608/frameset.htm
    Best Regards,
    DB49

  • Is it possible to set my IPhone 5S to automatically backup to the Verizon cloud or to backup assistant. The only settings I see is where it will remind me to do. Can it be set to automatically do this, like my Droid did.

    Is it possible to set my IPhone 5S to automatically backup to the Verizon cloud or to backup assistant. The only settings I see is where it will remind me to do. Can it be set to automatically do this, like my Droid did.

        We want your information backed up as easily as possible, Todd536. With Verizon Cloud, you can not only tell the application when to back up automatically, but what you want backed up each time. Visit http://bit.ly/1f5sO4P for all the steps to manage your Verizon Cloud on your iPhone.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Where can I find ipod updater so iTunes 10 will see my scrollwheel 10G ipod?

    Where can I find ipod updater so iTunes 10 will see my scrollwheel 10G ipod?
    I used it exclusively on an old iBook. (POS from the beginning - bad motherboard, replaced, went bad just out of warranty. So I use it for only certain things.)
    Now I want to load the scrollwheel ipod (also POS, bad motherboard where the headphones plug in, can't be repaired) from my iTunes 10 machine.
    iTunes 10 does not see the ipod with it's 1.2.6 software.   iTunes 7.5 sees it but will no longer update itself or the ipod.
    - my sig:  Whatever we're talking about, please don't tell me to buy a new one unless you're willing to pay for it.  Thanks.

    A "scrollwheel 10G" (10 GB) iPod may be 3rd gen...  If it's a 3rd gen iPod, the one with a "scrollwheel" and four "touch" buttons in a row between the screen and wheel (that glow orange), it will only work properly with a FireWire connection.  Although it has a dock connector, it does not charge over a USB connection.  If you Mac has a FireWire 800 port, you can use an adapter to connect to the old FireWire (400) docking cable.
    Mine still works perfectly (it's had a few battery replacements) with the latest iTunes and Mac OS X 10.7.4.  I think it has great sound...

  • Adding old scanner where Image Capture will see it

    I have an CanoScan N1220U flatbed scanner. Canon does not have driver software for this scanner for Intel Macs. I have downloaded a plugin for the scanner that was written for Power PC system X Macs, and I've put it in Photoshop's plugins folder. I can use it to scan with Photoshop provided I run PS in Rosetta mode. Is there some place in the system where I can put another copy of that driver (it's not a TWAIN driver) so that Image Capture will see it and use it? If so, will I have to run Image Capture in Rosetta mode, or can it automatically deal with parts in Rosetta mode, as some programs allegedly can?

    Your 1220 was designed when the Mac was system 7, running at 40 Mhz. and a large hard drive was anything over 150 MB. If you are scanning paper, buy a new epson all in one. I trashed my D660U canoscan because it took forever with very limited internal memory. can you spell recycle?
    ~(:O)~ ARTEE

  • Is there a resource where I can see if my older versions of applications will work after upgrading to 10.8 from 10.6.8?  I have some older Mac apps as well as things like Microsoft word and Adobe professional.

    Is there a resource where I can see if my older versions of applications will work after upgrading to 10.8 from 10.6.8?  I have some older Mac apps as well as things like Microsoft word and Adobe professional. I know PowerPC apps won't work, but I can't tell by the version numbers if they are PPC or Intel.

    Dr Jack wrote:
    I know PowerPC apps won't work...
    Restore the ability of PowerPC apps to work: Install Snow Leopard (with Rosetta) into Parallels:
                                  [click on images to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439

  • Corrected demand forecast(   ???)

    hi
    Out of 3 demand types I could see   Customer demand(coming from sales orders) ,forecast demand (coming from DP),then what is corrected demand forecast(   ???)
    how does it arrive??  Is it  a aggregated value of first 2 demand types. plz lend a hand
    thanks

    Hi,
    This depends on how you want to use the 'safety stock' as a constraint while planning with optimizer. You should consider few things while you decide on the level of the safety stock as a planning  constraint. Like you should always maintain safety stock violation penalty cost is greater than the product storage cost. If you dont, then optimizer will not plan for your safety stock.
    The same way you can decide on whether you want safety stock violation as a hard or soft constraint by assigning some safety stock violation rule/cost.
    So, depending on the business and importance of maintaining a minimum stock level at your inventory you can prioritize your goal of maintaining a stock level at least at product's safety stock.
    Like you can prioritize safety stock as demand forecast. So, in case of supply shortage you can use safety stock to meet demands from the customer.
    Hope this helps.
    Thanks,
    Satyajit

  • When i updated my computer, my safari on applications wont open and says "safari quit unexpectedly" and wont open but when i open it on the application key on the mac, safari will open. how do i get safari back on my dock where it will open.

    When i updated my computer, my safari on applications wont open and says "safari quit unexpectedly" and wont open but when i open it on the application key on the mac, safari will open. how do i get safari back on my dock where it will open. when i click reopen it wont. but i know safari works because thats what im using right now. it just wont open when i click the one i had loaded on my dock and in applications. please help!
    Stephanie

    Drag the Safari icon straight up and off the Dock so it goes, "poof" ...
    Now click and hold the Safari app in the Applications folder and drag that to the Dock.
    See if you can open a webpage in Safari.

  • Sort Key .... where we can see the activity in GL, Vendor, Customer mater

    Hi gurus,
    what is the use Sort key,
    where we can see that activity.  in GL Accounts, Vendor, customer master sort key where we can see effects. what is the use, how it will sort, where i can see.
    Thanks  for your reply.
    Anil

    Dear Anil,
    Sort key is the one that fills the "Assignment field" of a line item automatically.
    For example, for the GR / IR accounts, we normally give the "Purchase Order" as the sort key. This will make the line items in the GR/IR account to be filled with the Purchase order and the Item number.
    The automatic clearing (F.13) works with the assignment field. In case the net of two line items (Dr - Cr) is equal to zero and the assignment field of these two lines are the same, then the system will automatically clear these two lines. Hence "Sort key " fills the assignment field and is very useful in automatic clearing
    regards
    Venkatesh
    Assign points if useful

  • Which table can we see consumption and forecast values in forecast based planning

    Dear SAP Gurus,
    I am working on implementing forecast based planning for Spare parts for my client. They have one Main Plant which do purchase of Spare Parts and through Stock transfers moved to 60+ Plants from where Spares are being sold.
    Now I am carrying out SAP trial runs for a set of 160+ materials with various models and want to compare with their existing methodology of requirement calculation.
    I want to compile Consumption and Forecast data month wise for these trial materials (160+ materials in 60 Plants) . One way I thought is to go individual Material Master and looks for values in Forecast view. However it is tedious and time consuming.
    The table name shows RMCP2 and RM03M for forecast and Cons values, but I could not find the table.
    Hence I want to know which table if I can view I can get the consumption and forecast data calculated for quick copying and compilation. 
    Thanks and Regards,
    R.Velmurugan.

    Dear Mariano,
    Thanks for your valuable inputs.
    Like I could able to get the consumption values for materials using table MVER and fields GSV01,GSV02 etc.,
    What field I need refer in table PROP for getting forecast values.
    As such I could not see any column where in data are similar to Forecast view.
    Thanks and Regards,
    R.Velmurugan.

  • That line where you can see your bookmarks and stuff is gone..! how do i get it back?

    my laptop is 93.1 % filled up so its working pretty slow.. i was on a website and i tried right clicking (i needed to copy something) and the computer was to slow so it didnt work. (this has happend before). so i tried right clicking a couple of times and before i new it that line where you can see your bookmarks(and other stuff) was gone.! i tried right clicking again to see if i could get it back, but it didnt work. so i tried turning off the computer and it still didnt work. how do i get it back? and if i get it back, will all my bookmarks be gone?

    Firefox 3.6+ versions have a feature to allow the user to hide the Menu bar.
    Hit the '''Alt''' key to temporarily show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark. <br />
    The F10 can also be used on most PC's to temporarily reveal the Menu bar.
    https://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  • Where do I see what iPhone applications I've purchased  ?

    Well the subject says it all, Where do I see what iPhone applications I've purchased ?
    I recently restored my iPhone and now I have to download all my apps again.
    And from what I understand there is no way to see in iTunes if you've already payed for the app because it will still appear like you're buying it again until you press the buy button and when it says that you have already purchased it and wont have to do it again.
    And since many apps looks the same in icon and name I don't want to accidental purchase an app that I haven't already purchased..
    So, where do I see all my purchases?
    Thanks

    I recently restored my iPhone and now I have to download all my apps again.
    They should all be in your iTunes Library on your computer if you've been syncing and backing up your Apps regularly.
    Didn't you transfer any Apps downloaded on your iPhone to your PC before restoring it?
    So, where do I see all my purchases?
    Either in the email Receipts you got from Apple, everytime you downloaded an App, or in your iTunes Store account from within iTunes itself.
    Choose *Store > View my Account...* then click *Purchase History*

  • Where can I see output from ClassInitialize and ClassCleanup

    Hi,
    If I write
    TestContext.WriteLine("Some output")
    or
    Console.WriteLine("Some output")
    inside a test method, i see an "output" link in the Test Explorer and when I click it I can see the output "Some output". This is also true when I do it from a [TestInialize], [TestCleanup] and even [AssemblyInitiailize] or [AssemblyCleanup]
    methods. However, if I do that from a [ClassInitialize] or [ClassCleanup] methods - I can't see the output.
    Is there any reason for that? How/where can I see any output that I write inside ClassInitialize?
    AFAIR, in VS2010 I was able to see that from a link on the Test Results pane, but I currently don't have VS2010 installed to verify it.
    Thanks,
    Arnon.
    Arnon Axelrod

    Hi Arnon,
    >>I checked it again, and I realize that it works OK for regular MSTest classes (with [TestClass] attribute), but not for Coded UI (with [CodedUITest] attribute).
    I think I could repro this issue in my side, I get the same issue as yours using the VS2013 with the latest update package, it doesn't support it in Coded UI tests even if I enable the detailed coded UI test log:
    https://msdn.microsoft.com/en-us/library/jj159363.aspx
    To get the issue confirmed and diagnose by product team, would you please create connect report for it? You will get email notification for update.
    http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx
    If you submit the report, please share us the link here, I will help you vote it.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Where can I see API for ADF Internal Class for a Specific JDev Version

    Hi,
    I wanted to check the API for certain ADF internal classes. Is this possible and where can I see it?
    I know also for a fact that its not good practice to make use of the internal class but my case is a little different
    so I would like to extend how the internal class is working.
    I use JDev 11G PS3 (11.1.1.4)
    Thanks

    Hi,
    Hope following will useful
    http://download.oracle.com/docs/cd/B14099_19/web.1012/b14022/overview-summary.html
    http://download.oracle.com/docs/cd/B14099_19/web.1012/b14022/allclasses-noframe.html

Maybe you are looking for