Where you are going to activate  activity type in cost centre

Hi gurus
whenever i am trying to assign activity type in cost centre, it is not allowing to save that particular type of  cost centre.
also it is giving error as activity price planning is not done for this cost centre
can you please suggest how to resolve this issue
thanks
shaik

Hi Shaik,
Can you please let me know the error message number that you are receiving?
Thanks in advance.
Best Regards,
Vanessa Barth.

Similar Messages

  • Usage of Activity types under Cost Centre.

    Hi
    I would like to know the usage of activity types under cost centre.
    How to do direct and indirect activity type allocation.  Please explain indetail from scratch to finish with necessary t.codes at the earliest.
    Appreciate your cooperation at the earliest.
    regards.

    Hi,
    as far as usage of activity types under cost center is concerned it is addressed by ist reply to your query by another SAP Guru.
    with respect to Direct activity allocation,
    When we know the source cost center and target cost center then we allocate the activities from source cost center to Target cost center (T.Code KB21N)
    The cost is picked from the planned price given at KP26.
    Withe respect to Indirect activity allocation:
    We do not know the Traget Cost center in this case.
    First we need to enter the activity consumption in the sender cost center (source cost center).
    Then we need to allocate then indirectly to the target cost centers on some allocation basis using distribution cycles
    I am sure this will clear your query.
    Please assign points suitably
    Best Regards
    surya

  • Activity Types and Cost Centres

    Our PP is not yet live now.
    While going through the system settings, it is found that many activities (approx. 15 for indirect expenses also) are planned in the Production Cost Centres.
    However, these activities are not included in the master data of the Work Centre. Only one activity type is mentioned there for machining.
    Then, what is the purpose of other activity types planned if they are not mentioned in the Work Centre ?
    Is there any other way these activity costs will appear in the Cost report ?

    Hi,
    You are almost on the right line, activity quantities will be triggered in the  cost center report based on the routing master and through  the confirmation from the production orders.
    For the creation of the  work center - Activity Planning KP26 is required. Cost center/Activity
    where we can plan the activity quantities.
    Prior to that KP06 is required to plan the  primary cost combination of (Cost Element/Cost center/Activity Type) where we can plan the cost.
    Based on the above information we can calculate the plan price - KSPI
    Based on the confirmation from the production orders activity quantities will be updated in the center report. cost will be updated with actual postings in the cost center.
    So that you can calculate the actual activity price.
    Please look into the blog for better understanding:
    Expenses Analysis and Its splitting  - Part 1
    Regards,
    Pavan Kumar Arvapally

  • Assignment of Activity Types to Cost Centre

    hi,
      i am  creating a work centre and for costing purposes i need to give the activity type and the cost centre.
      even though i have defined an activity type and in it used an allocation cost element which in term is assigned to a cost centre,in the work centre when i search for the activity type the system shows an error.....No activity types assigned to cost center X, controlling area Y on 07.02.2007 where X and Y are variables ofcourse.
      what could be the possible reason?
      thanks and regards
    shekhar

    Hi shekhar,
    Check using KL02 or KL03 again, especially the validity dates of the activity type and may be the coster center KS02, KS03 as well.  I hope, that controlling area is fine.
    There must be some settings wrong, ...
    Please reward, wenn it is useful.
    Kind regards,
    Zhenbo

  • Activity Types to Cost Center

    hi,
    how to assign activity types to cost centers ??
    G

    I got a message like this when i try to include the activity rates to work centers, what settings do i want to maintain ?
    Activity type 10-140 not set up for cost center 1000 MPT080
    Message no. CR061
    Diagnosis
    You are attempting to assign activity type 10-140 to the work center. However, this activity type has not yet been set up in controlling area 1000 for cost center MPT080.
    Procedure
    Assign an activity type set up for cost center MPT080 to the work center or
    assign the desired activity type to cost center MPT080 within cost center accounting.
    Thanks

  • HT4623 trying to active my old iPhone 3gs. it showing that activation server is temporary unavailable and on the iTunes showing that there is no sim card installed in the iPhone you are attempting to activate. I unlocked my phone then i upgrade it, after

    trying to active my old iPhone 3gs. it showing that activation server is temporary unavailable and on the iTunes showing that there is no sim card installed in the iPhone you are attempting to activate. I unlocked my phone then i upgrade it, after that this happen. i tried with other sim same message come again and again.if any body know solution let me know. thanks

    Was the SIM card activated on another phone? I assume this is an ATT style trying to use on T-Mobile? Was the SIM installed correctly? Is the carrier (like T-Mobile) operating IOS 6 devices yet?
    If the SIM is a valid SIM from say T-Mobile, you may want to contact them for assistance activating the SIM card.
    Activation and SIM issues typically point to the carrier. And if this was a CDMA phone say working with verizon, it will NOT work for ATT or T-Mobile as they use different electronics on the 3GS. The SIM slot is for international use only.

  • HT201328 After restore the phone, I can't active it anymore. When connect to iTune error message "There is no SIM card installed in the iPhone you are attempting to activate."

    I've a request to unlock my phone to Telstra and recive info for unlocked.
    After that I restore the phone following the instruction: http://support.apple.com/kb/HT5014.
    I can't active my iPhone anymore. When connect to iTune, I got error message "There is no SIM card installed in the iPhone you are attempting to activate." even my SIM is working well

    Read here:
    http://support.apple.com/kb/ts4148

  • HT4972 when restoring cannot pass message (There is no SIM card installed in the iPhone you are attempting to activate.)  and there is a active Sim card inside

    when restoring cannot pass message (There is no SIM card installed in the iPhone you are attempting to activate.)  and there is a active Sim card inside.  How can I get Pass that message?

    Was your phone locked on a carrier and you unlocked it by jailbreaking ?

  • TS1368 my iphone is displaying "there is no sim card installed in the iphone you are attempting to activate" wn i connect it to itunes

    my iphone is displaying "there is no sim card installed in the iphone you are attempting to activate" wn i connect it to itunes,bcoz i hv installed ios5.0.1 for my iphone 3g.can you tel me how to solve dis problem?

    I’m having the same issue.
    My phone indeed has no SIM card. I kept the 3GS after upgrading to an iPhone 4 and I was simply using it as an iPod Touch.
    As far as I had been told, I was perfectly OK to do that and it had been going fro update to update without any issue up to now.
    The problem is that iOS 5 requires a new activation, and that this model cannot be activated with a valid SIM. Obivously, I’m not going to take a new line with AT&T ad pay $xxx every month just to be able to activate my previous phone.
    I contacted AT&T but they had no clue how to get out of the problem and said it was in Apple’s hands anyway.
    I tried restoring 4.3.5 on the phone, but so far I haven’t been successful :-\
    I’m open to any suggestion
    Corentin

  • There is no SIM card in the phone you are attempting to activate message??

    I got a replacemnt 4S from Apple and when I plug it into iTunes I keep getting There is no SIM card in the phone you are trying to activate message. Why is this happening? This didn't happen with my first phone that I got from Verizon.

    actually, there should be a sim card in the slot.  It will not have been activated, but it should be there.  just open it up and check.  also...be careful about where you are traveling internationally, especially if you are using data.  A few countries (not most, about 40...many in Asia and South America) use both CDMA and GSM.  on your 4s you do not have an option to choose what Network System you want to use (GSM, CDMA, AUTO etc).  On my recent trip to Venezuela, my 4s only grabbed CDMA which left me without email, web and texting...not good for a business trip.  After several hours on the phone with Verizon, I discovered that they are pushing an update to all Verizon 4s phones (not sure if it is ALL 4s phones or just those that have had their sims activated).  Was told the PRL version number for this is 52638 (a number which is outside the range of the November PRL listings).  what happened to me was either 1) my phone was never pushed this PRL (the push happens on Mondays and Tuesdays), or my phone may have been pushed the update but if *228 is pressed, that will overwrite the PRL so you are out of luck!  in any event, if you are traveling to one of these countries and you want data, be sure you not only activate your sim, but that you have the proper PRL in your phone.  Remember, until they come up with a permanent fix, don't do another *228 once you have this update!!

  • "No SIM card installed in the iPhone you are attempting to activate" after updating to iOS 5. Living in Canada with Rogers service provider.

    Any solutions yet?
    "No SIM card installed in the iPhone you are attempting to activate" after updating to iOS 5.
    Living in Canada with Rogers service provider.

    Its an IMEI issue.  In my case, about a year ago, after originally purchasing my iP4 from AT&T store, I had a prox. sensor issue.  Went to the Apple Store, they replaced the phone.  Here is where it all stems from.  The IMEI of the new phone was never updated in AT&T/Carriers systems.  For iOS updates prior to iOS5, this was not an issue.  My phone did its iOS updates along the way with no probs.  However, when I updated to iOS5, the firmware did not match the IMEI with what AT&T/carrier had.  When I went to Apple Store for the issue about 3 days ago and was given a new phone....again....the new phones IMEI was never updated with AT&T/carrier.  I then again attempted the upgrade to iOS5 with the new phone and iOS5 bricked that one also.  Today, at the store, we tried 3 replacements with same outcome.
    So, after 4 hours and 3 replacement phones with Apple Store Tech (BTW totally gobsmacked), we solved the issue.  Luckily, due to iPhone 4S launch, there was an AT&T guy there with a computer tied to the AT&T network to work along with us.  The issue is......once the IMEI's on carrier account and phone do not match, iOS5 shuts down the sim card reader within phone.....forever. How to reverse this?......this is a question Apple needs to come up with, because with my case, they have 5 "bricked" phones. 
    What solved the issue was to get a new phone with iOS4.3.5, new SIM from carrier/AT&T, have carrier/AT&T (in their system) change/match the IMEI to the new phone and activate new SIM.  Then, do iOS5 upgrade. 
    Simple and makes total sense..........however........there is an internal firmware (Apple Security??) issue that bricks the phone once IMEI's dont match. 
    I am now on iOS5.....no problems......so far.  Good luck to all others. 

  • There is no sim card installed in the iphone you are attempting to activate what should i do now

    there is no sim card installed in the iphone you are attempting to activate what should i do now
    I upgraded my i phone 3gs from 4.1 to 6.1.6 then the above problem arised

    I too am having this problem. All I want to do is use my iCloud backup of my phone to fix a bug in IOS 7 that loop-prompts me to connect to iTunes. Anyone that has an answer to to OP would be greatly appreciated. There have been almost 3000 views on this page and only 8 posts that aren't much help at all so far. Enough with this 'Do you know how to read' white-space. I'm here for answers!!!
    However, I suppose I already have the answer. This is simply another example of Apple using their software to limit consumers of certain demographics (namely, people who have the phone but don't pay for service from a carrier). A SIM card is only required for activation because the software administrator says so; and for no other reason. The hardware is there and its perfectly functional otherwise. I shouldn't even need to activate in the first place. Just restore my freaking phone!!

  • I having problem keep ask me connect to itunes......can't restore...keep show there is no sim card installed in the iphone you are attempting to activate.....how?

    I having problem keep ask me connect to itunes......can't restore...keep show there is no sim card installed in the iphone you are attempting to activate.....how?
    ITUNES show keep show there is no sim card installed in the iphone you are attempting to activate.....how?

    rajafromcalifornia wrote:
    how can i get rid of this error There is no sim card installed in the phone u are attempting to activate please disconnect and a sim card in the phone please help me and my iphone cannot go to menu display can u help me please
    You cannot active a phone if it does not have a SIM card in it. Period. End of discussion.
    If you get this error and it has a SIM card in the phone then either the SIM card is defective or the phone is defective. Get a new SIM card and try again. If the problem occurs with the new SIM card the phone needs to be repaired.

  • I'm updating my iphone 3gs but cannot activate it because the message" there is no sim card installed in  the iphone you are attempting to activate", appeared. I've already disconnected my iphone and reinserted the sim,still nothing happened.help!i'm upda

    Ii'm updating my iphone 3gs but cannot activate it because the message" there is no sim card installed in  the iphone you are attempting to activate", appeared. I've already disconnected my iphone and reinserted the sim,still nothing happened.help!

    this problem startedwhen i tried to restore my i phone to original version ,when i had resoterd it said connect to itunes when i connected to i tunes it said no sim card installed so it cant be activated ,and now am stuck.i cnahged my simcard 3 times!!!

  • "There is no SIM card installed in the iPhone you are attempting to activate" I do not wish to use as iPhone anymore, just an iPod is there a way to use again without inserting a sim card?

    "There is no SIM card installed in the iPhone you are attempting to activate" I do not wish to use as iPhone anymore, just an iPod is there a way to use again without inserting a sim card? There is a hardware fault but this is confined to the internal sim card receivers and purely the parts related to the sim card there are no other hardware faults! I've tried dfu mode and a restore and cant find anything related to this anywhere on the internet, thanks for any help in advance, Bobby

    iPhones require a SIM card, that card does not need to be active.

Maybe you are looking for

  • I use audio memos and files are saved in icloud. while updating audio memo the apps stop working. i cannot access the apps. how can i retrieve the files saved in icloud ?

    I can't access the audio memo apps but i can see under usage - manage storage that all the files are located in icloud. how to extract .wav files from icloud if the apps is no longer responding to fileshare in itunes? Thanks.

  • External hard drive freezes on boot.

    I just bought a USB 2.0, 320gb Iomega External Hard Drive. I formatted the drive as OS X Extended (Journaled). It mounts fine once I turn it on and I can access all my files with ease but there is a problem lying under the surface. When I shutdown my

  • Oracle Forms 10g & Oracle 10g DB Connection Problem

    Toady i have installed oracle forms 10g and oracle 10g db when i run my form it gives me this error how can i resolve it "ora-12154 tns could not resolve the connect identifier specified" Here are the values in forms 10g tns # tnsnames.ora Network Co

  • Multiple POs wrongly linked to SO

    Hi, I have got a Sales order which is wrongly linked to 23 different Purchase orders. The SO created only 1 requisition. But the PO that was dropped from that req is not showing in the document flow of the Sales order. 23 wrong POs are getting displa

  • Group by query on ...

    Thanks in advance to all As I can get records whose count(COL1) is <= 4 too that is SELECT COL1, COL2, count (*) FROM TABEL Á.      WHERE A.XXX between & data1 AND & DATA2      having count(COL1) >= 4 --      GROUP BY COL1, COL2 ORDER BY 1,2 without