Whereis the gpib pcii/iia driver for windows 98 ?or 95

Jo18,
Visit the following link: http://www.ni.com/support/gpib/versions.htm
Hope this helps,
L Aguila
Applications Engineer
National Instruments

Similar Messages

GPIB-PCII/IIA Drivers for Windows 98

Hello , Could someone can help me ? I got a trouble in GPIB-PCII/IIA card.
I want to driver it in Windows 98 , but Windows hardware manager can not find this card.
Could someone can tell me how to do for complete step .
Thanks a lot !!

大家好，我现在遇到了问题了，希望大家可以帮帮我。
    我最近在做轻集料混凝土的交流阻抗谱测试，我先叙述一下遇到的问题：
   我的电脑是windows98、仪器是PARC公司的M273A/锁相5210，所用GPIB卡为：GPIB PCIIA IEEE488.2,测试软件为M398，程序时在DOS下运行的。运行Eis.bat程序run时，出现
     potentiostat not found,
     Dev_poll 1 error caused error in gpib_ error _check
32768 _0
     Dev_poll 3 error caused error in gpib_error_check
32768 _0
     当运行M398.exe时，提示：
ibfind board 1caused error in gpib_error_check 32768_7
    gpib.com improperly configured，
     gpib card not installed,
GSS is either not loaded or improperly installed.
ABORTED:Error Level 1,Error Code 8
     请问是驱动问题还是GPIB卡出了问题？前几次也出现过类似的问题，当时关闭电脑，关闭仪器，过一会重新开机就正常了，今天有出现了类似的问题，可是关机，关闭程序之后再开机就不再正常工作了，
      还有好多次测试快运行完在读取数据时程序突然就没有反应了，只能强制关闭程序，之后重新启动就再不能正常运行了，出现和上面一样的问题。
期待大家的帮助！

Would I be able to use the same external hard drive for Windows and OSX?

I plan to get an external HD to put a lot of my multimedia files on and for backups but I don't know if I'll need an individual one for each operating system. I am going to be running a MacBook Pro with both Windows and OSX through Boot Camp.

jengwall,
No, you won't need more than a single drive. There are several options to meet your needs.
OS X can partition your external, and the formats for the various volumes can be HFS+ (the native Mac format) or FAT-32 (Windows format). While OS X cannot create NTFS volumes, and it cannot write to them, it can read them. Any FAT-32 volumes created in OS X can be converted to NTFS by Windows, if and when you like.
Windows cannot natively read HFS+ volumes, and only the FAT-32 format will be both read and write for both Windows and OS X. However, there are some third-party solutions.
"Macdrive" is a Windows utility that allows it to access HFS+ volumes as read/write. On the Mac side, there is "MacFuse," which gives OS X the ability to not just read, but write to NTFS volumes.
Scott

Where can I download the instant client ODBC driver for windows 7

I upgrade to windows 7 and my instant client connecting to oracle from ms Access stop working. Is there any documentation on how it works on windows 7. I use instant client and odbc cleint for xp.
Thanks

11.2 is currently the only supported version on Win7, and you can get the instant client here:
http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/winsoft.html
Hope it helps,
Greg

How do I install the apple mobile device driver for windows xp?

I get a code 10 error when I plug my iphone in to the usb connection on my windows xp based computer. I tried going through several steps to remove all apple software from my computer, then reinstalling it and still I cannot get my iphone to show up as a camera on my computer. not sure where to go from here.

http://support.apple.com/kb/TS1567

Win2000 support for GPIB-PCII/IIA

Is there a driver that allows to use the:
GPIB-PCII/IIA (rev.5)
with Win2000 or must I downgrade to win98 and use the drivers present in NI webpage.
Thanks in advance.

ThomasD wrote in message news:<[email protected]>...
> Hello,
>
> the GPIB-PCII/IIA is not supported under Win 2000. You can also see
> this on the following link:
> http://digital.ni.com/public.nsf/websearch/0AE0DAD0C1142EF8862565230058DAE2?OpenDocument
> So, you have to downgrade your system to Win 9x and download the
> driver on this page:
> http://www.ni.com/support/gpib/versions.htm
>
I feared the worst...back to instability and blue screen.
Thank you!

How Can I get v1.52 of "ThinkPad Power Management driver for Windows"?

The subject says it all: How can I get v1.52 of the "ThinkPad Power Management driver for Windows Vista, XP, 2000, Me, 98 SE - ThinkPad" driver? Since installing v1.53 I've been experiencing screen issues (screen goes dark, and it's very hard to get the screen brightness back to normal) that seem to be tied to my T40p entering sleep mode / turning off the screen.
I want to see if reverting back to v1.52 fixes these problems.
Thanks,
RocketDude
RocketDude
T400s 2801-CTO

Nilst,
Issue has been escalated however currently pending the team to fix it. Will update once I have news from them.
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

Trouble installing latest Intel Display Driver for Windows 7

Anyone else experiencing issues trying to install the latest Intel Display Driver for Windows 7, version 8.15.10.2057, dated 2 Mar 2010?
This is the second updated driver release that refuses to install due the following error while running setup.exe: This computer does not meet the minimum requirements for installing the software.
I've verified compatibility and have disabled Switchable graphics and selected Integrated Graphics in the BIOS
System: T400, 2764-CTO running Windows 7 (64-bit)
Thanks...
T400 2764CTO
Windows 7 x64

bwpotter,
Appears you selected the right .inf file for Win7/64. Notwithstanding the error flags, are you sure the driver did not install?
For WinXP/32, the equivalent file name is kit22686.inf. In the case of WinXP (likely similar for Vista and Win7), Lenovo's file-set will unpack to C:\drivers\WIN\DISPLAY2. The .inf file that appears in the Device Manager install-routine lives one level down, in C:\drivers\WIN\DISPLAY2\Graphics. Only one .inf file resides in this directory.
When forcing installation of the driver under WinXP, error messages appear that are similar (but not necessarily identical) to those you encountered. Still, after a sequence of five or six such error messages, the driver does load and can be verified after a reboot. (The new driver has performed to spec for the past several days--no issues whatsoever.)
The final splash screen in the series reports "Completing the Hardware Update Wizard." (This message does not, however, necessarily denote a successful installation.)
In the case of WinXP, the errors appear to be generated by the installer, igxpun.exe (v1.2.30.0). Note that the flaky display driver installation should generate an error log. Search for an error log file using the string "*appcompat.txt" (no quotes) and see what it says.
In the end, the problems with this package can be attributed to simple sloppiness (vendors commonly forget to eat their dog food) and should be quickly fixed if the community barks loudly.
Hope this helps.
--BAM

CM 1017 MFP Driver for Windows 10

Hello, is there a driver for this printer for Windows 10 that will allow use of both printer and scanner

Hi, For printing from your printer, you could be using the HP Universal Print Driver for Windows PCL6 (64-bit). We do not have a specifc software that can be installed to Scan, but windows 10 have a number of options in the OS that you can use to Scan from the Printer.1. Paint is one option you can use to Scan Images.2. Windows Fax and Scan is a another app in Windows 10 you can use to scan a photo or document. Search Windows for fax, and click Windows Fax and Scan in the list of results.3. HP Scan and Capture is a simple application that captures photos and documents from your network or USB connected HP printer. These photos and documents can be previewed, saved, printed, or shared to other applications. Install the App from the Windows Store. Bops

Driver W3.1 for GPIB - PCII/IIA

It's not possible to download on this web site the driver W3.1 for GPIB - PCII / IIA. If someone have this "antic" version thanks.

Hi,
You should be able to download the driver at http://www.ni.com/support/gpib/versions.htm#pc_dos. Did you find a link to the driver elsewhere that was broken?
Best Regards,
Aaron K.
Application Engineer
National Instruments

Can I install a GPIB-PCII/IIA Card into a windows XP computer and if so how?

Can I install a GPIB-PCII/IIA ISA Card into a windows XP computer? If this is possible can you give me the stsps needed to do so.

Hello,
No, this is not possible. This "old" board isn't supported under Windows XP. Check this site for an overview: http://www.ni.com/support/gpib/versions.htm#pc
Regards,
Luca
Regards,
Luca

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

All,
A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
So happy to be done w/this one!
Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
TC

I am confused by the installation step that requires you to create a bootable USB drive for windows installation. What is the ISO image and why has it selected my Passport backup drive as the destination disc?

In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation. To do so, I must choose an ISO image. What is that? When I click "choose" I don't understand the options presented. Is this the destination of the partition or where Windows will reside on the Mac? Why does it also indicate the the destination disk si my WD Passport Back up drive?

OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive). I also have the discs for both 64bit and 32bit Windows along with the product key. I am still not sure what to do when faced with the options after "choose".

If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition?

If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition? Will it be universal for the computer or would i have to install it on both operating systems? Or, if I install office BEFORE partitioning, will it be available on both platforms after i partition?

If I understand your questions correctly, then I'm inclined to say no. Office for Windows and Office for Mac are two completely different applications. if you run via BootCamp, only one partition will boot.
If you want to run Mac and Windows at the same time, you could do what I did:
Get Parallels
Install Windows as VM on top of Parallels
Install Office in Windows
Now, you can run your OS X, jump into Parallels' WIndows and use Office that way.
It needs a lot of RAM, 4 is a bare minimum to realy make it sensible, 8 wouldn't hurt.

ISA driver for Windows 2K

We are trying to upgrade our current programs in LabVIEW 4.1 with Windows 95 to LabVIEW 6.1 with Windows 2K and possibly to TestStand in future. In order to do so, I need new ISA driver for windows 2K. Is there ISA driver I can dl from internet or do I need to create one for my own. Is it's available out there, do I need to buy it or is it a freeware?
Thank you for your help in advance.
Danny

Is the ISA you're talking about the "Industry Standard Architecture" hardware bus that's been replaced by the PCI bus? If you need a driver for an ISA card, what is the card? Many new computers come with only PCI slots so it that your problem? LabVIEW itself has nothing to do with the ISA bus and couldn't care less if you've got ISA or PCI DAQ/GPIB/whatever cards.

Whereis the gpib pcii/iia driver for windows 98 ?or 95

Similar Messages

Maybe you are looking for