Wheres the final cut pro sound effects

Downloaded Final Cut Pro, $299, where's the final Cut Pro Sound Effects?  Mine is empty when highlighting the folder

melfrombrookfield wrote:
Downloaded Final Cut Pro, $299, where's the final Cut Pro Sound Effects?  Mine is empty when highlighting the folder
It's all in the additional download, like Stephen said.

Similar Messages

  • Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
    I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
    Next step is to pan that pink noise around with my SPL meter to calibrate the room.

  • I don't have any Final Cut Pro Sound Effects. Help Me

    I just Downloaded Final Cut Pro Yesterday, Today I Went To Check It Out And Noticed I didn't have any Final Cut Pro Sound Effects. Everyone says there is two folders with the same name, one grey one blue, but there both grey for me. I go into finder and there is no such folder anywhere.

    Final Cut Pro X Content v1.0
    http://support.apple.com/kb/DL1394   <<< click here.

  • Why can't I add final cut pro sound effects?

    I am wanting to add a sound effect or background music to my video but I can't access it through final cut pro x.  I see the only option I can add music through is iTunes.  It doesn't give me any other folders.  I even tried to drag in the folders from the finder (because these sound are in my computer) but that didn't seem to work. Please help!

    Skyking wrote:
    I'm wondering if that had something to do with it.
    I doubt it.
    Howvever, in hte category of misery (actially, an annoyance) loves company, I have a similar photo browser issue. It links…until it doesn't.
    Russ

  • How can I change the folder where the Final Cut Pro X files?

    I've tried dragging it to the new destination, but the program doesn't seem to recognize the moving process and lost the thumbnails and the reference to the files. Is there any other way?

    Tom,
    Thank you for your fast answer.
    Not copying folders... well I did not copy folders, I copied 4 entire drives of 4 Tb. I don't imagine moving events and projects one by one with FCPX tools. Unless it is the only way but that will take me 4 days.
    Here is a screenshot of the root level of the Pegasus.
    No, i do not copy the media files in the event folders.
    Yes the Pegasus drive appears in FCP. I use it for actual new project with the media in specific folders for each project. Everything works fine.
    Playback is set to original media.

  • How can i uninstall the final cut pro x trial version after installing final cut pro x

    How can I unintall the trial version of the final cut pro x after installing the new updated final cut pro x 10.2

    I have the same issue. There are now two version of FCP X: the trial one and the purchased one. Problem is, the first hasn't been overwritten by the second, and all my projects are only visible on Final Cut Pro X Trial, and nothing on FCP X.
    How and where do I get a fast answer from customer support?
    Thank you

  • How would I contact the apple Webmaster for company submission to the Final Cut Pro X Plugins Page?

    I would like to have Pixel FIlm Studios Store Link added to the Final Cut Pro X Plugins and Effects page.
    How would I go about contacting the correct person at Apple?

    Make your suggestions at Apple Feedback.

  • The final cut pro application is GIANT 143.9 GB

    Hi Folks,
    I've set up a new MacPro QuadCore as an edit station, and I'm having some difficulty getting the Caldigit HD one to work with it. I'm still working with Caldigit on that.
    Likely as a side effect of the machine hanging mid render several times due to the raid array going offline bad things are beginning to happen.
    All capture / render / autosave files are set to the array, as are project files, so essentially nothing significant is being written to the boot drive.
    However my boot drive filled up for no known reason, and when digging through with drive genius I noticed that the final cut pro application itself is now listed as 143.9 G.
    Ahhh OK.
    Do I have to flatten and reinstall or is there a simpler solution.
    How in the world did the app itself get that big?
    BTW DiskWarrior etc. report the hardware of the boot drive to be fine, the directory structure and permission to be good.
    Thanks,
    Steve

    It has happened before that when the scratch disk does a disappearing act, FCP will sometimes stuff renders inside the FCP program container.
    In the Applications folder, Right click on FCP and go to SHOW PACKAGE CONTENTS. Once inside, start looking around for very large .mov files.
    You can safely delete them.
    x

  • I downloaded the Final Cut Pro X trial but my movie is 17 minutes long but it will only Share to Quick time 6:55 minutes. How do I fix this and export the full 17 minutes?

    I downloaded the Final Cut Pro X trial but my movie is 17 minutes long but it will only Share to Quick time 6:55 minutes. How do I fix this and export the full 17 minutes?

    Thank You. Im trying to export everything. I pressed command A and then did the Share button. Ill attach the screenshot please let me know if I need to change something.

  • I can't download the final cut pro's update in AppleStore. Have a solution ?

    Hello,
    I can't download the final cut pro's update in AppleStore. Have a solution ?
    Thx

    Is the application in your Purchases page? Are you signed in to the App Store using the Apple ID that purchased the software?

  • How to create an install cd with the final cut pro x app if the app comes from App.Store?

    How to create an install cd with the final cut pro x app if the app comes from App.Store?

    Just copy the Application FCPX to your CD. When you want to install drag the FCPX to the Application folder and you are done.

  • Is the final cut pro application too large for my 13" mac pro or should I install it on an external drive?

    Is the final cut pro application too large for my mac book pro laptop? Should I install it on a hard drive?

    4 GB hard drive!?!  It's a memory size not hard drive size   Your hard drive is much bigger than 4 GB . If you have 2011 model then hard drive size is 500GB or 750 GB HDD. You can install final cut pro and many other programs .

  • Provide Feedback for the Final Cut Pro User Manual and Onscreen Help Here

    The Apple documentation team for Final Cut Pro would like to know what you think about the Final Cut Pro 5 Help documentation (available in the Help menu):
    • How often do you use the Final Cut Pro Help? Under what circumstances do you use it most?
    • How do you find what you're looking for in Final Cut Pro Help? For example: table of contents, index, skimming, PDF links, PDF search?
    • What do you like about it most?
    • What is missing?
    • Are there any particular examples of manuals or documentation that you consider to be good models for the Final Cut Pro manual and onscreen help?
    • By what method do you usually learn a new application? For example: provided tutorials and manuals, third-party tutorials or books, training classes?
    • Did you use the Final Cut Pro Getting Started book to familiarize yourself with Final Cut Pro? If so, do you feel the book provided a good introduction to the application?
    • What do you think is the most difficult feature/concept to grasp in Final Cut Pro?
    • What's the most frustrating experience you've had with the Final Cut Pro documentation?
    • Do you prefer electronic or print documentation?
    • Are there any other delivery methods or media you think we should explore?
    • What size computer display do you typically use to view the onscreen help? For example: 15-inch, 17-inch, 20-inch, 23-inch, or 30-inch?
    • What resolution is the computer display set to when you view onscreen help? For example: 1024 x 768, 1280 x 854, or 1920 x 1200 pixels?
    • Do you use multiple computer displays?

    • How often do you use the Final Cut Pro Help? Under
    what circumstances do you use it most?
    Often, I much prefer that to the Manual, though the Search function is very clunky. Search for Nest for example and you'll get about 50 listings for the table of contents and indexes alone, when all I would really want is the explanation of how to actually create a Nest.
    • How do you find what you're looking for in Final
    Cut Pro Help? For example: table of contents, index,
    skimming, PDF links, PDF search?
    Search.
    • What do you like about it most?
    Ease of use to get through the manual instead of going through the books themselves.
    • What is missing?
    Better organization of the search results. Again, if I search Nests, make the first set of results the answers that actually show me how to use the tool, not the 50 times it appears in the table of contents and indexes.
    • Are there any particular examples of manuals or
    documentation that you consider to be good models for
    the Final Cut Pro manual and onscreen help?
    Honestly, Apple's is the best I've seen for the moment.
    • By what method do you usually learn a new
    application? For example: provided tutorials and
    manuals, third-party tutorials or books, training
    classes?
    Just crack the app open and start. Use websites like the Creative Cow for more input and ideas.
    • Did you use the Final Cut Pro Getting Started book
    to familiarize yourself with Final Cut Pro? If so, do
    you feel the book provided a good introduction to the
    application?
    I thought the Tutorial that came with my first copy of FCP (Version 2.0) was outstanding at introducing me to the interface and how FCP operated. I came from Media 100 and in particular, the Log and Capture operation was completely different than what I was used to.
    • What do you think is the most difficult
    feature/concept to grasp in Final Cut Pro?
    Media Manager. Not sure why it has to be so convoluted. Media 100 was too easy with this one. Select the Sequence to be up-rez'd, set your new format and capture.
    • What's the most frustrating experience you've had
    with the Final Cut Pro documentation?
    Search results using the Help menu.
    • Do you prefer electronic or print documentation?
    Actually both. If the electronic search gets too frustrating, I'll pull the print manual out to find what I really need.
    • Are there any other delivery methods or media you
    think we should explore?
    Not really. Internet based help is always nice, but I don't keep my FCP workstations connected to the web so that would actually create a bigger hassle for us.
    • What size computer display do you typically use to
    view the onscreen help? For example: 15-inch,
    17-inch, 20-inch, 23-inch, or 30-inch?
    17" Powerbook display, 17" 20" and 23" Apple Displays and a 17" Sony Display.
    • What resolution is the computer display set to when
    you view onscreen help? For example: 1024 x 768, 1280
    x 854, or 1920 x 1200 pixels?
    Highest resolution for that monitor.
    • Do you use multiple computer displays?
    Yes. 23 & 17" on one G5. 20 & 17" on the 2nd G5. 17" Powerbook
    Powerbook G4 17, G5 Dual 2.0, G5 Dual 2.0 Mac OS X (10.4.5) AJA Kona 2 on both G5's, Fibre Channel and SATA arrays in use.

  • Using the final cut pro trial, i can't export?

    i downloaded the final cut pro trial a while ago, not activating until recently. i guess before i activated it, after downloading, i had to get switch my glitchy macbook for a new identical one. i don't know if this is the problem, but it could be. i am making a movie in the trial version, and under commands, export is not clickable. so, i used the share option, and tried to share it as a master file... then to an apple product... then tried to share to youtube. all result with the same thing. it'll act as if it's working, but after maybe 30 seconds a little message saying "Share Failed." when i click on details, all it says is "The operation could not be completed because an error occurred when creating frame 1543 (error -1)." I don't know what that means. Does it mean one of my clips is the glitch? I have no idea what the problem is here. Are you even allowed to export using the trial version anyway? I haven't been able to get a straight answer there either. Thanks!

    As Bobbyyco said, you should definitely be able to share from the trial version.
    In Preferences>General>Time Display, you can change the to Frames, which makes it easier to locte the slip that includes the frame in the error message.
    You could then use a replace edit to substitute something ales in its place. Then use the range tool to select a short section that includes the replaced clip and export as a master file.
    If it works, your project should export. (Transcode a new version of the clip by right clicking and use that as the permanent substitute clip.
    If it doesn't work, turn off background rendering in Preferences. Select your project and from the File menu, choose Delete Project Render FIles. When prompted choose All Files. Do another test export as a master file without rendering.
    Russ

  • How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

    How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

    Go to the Info inspector for the still image and in settings select the alpha type.

Maybe you are looking for

  • Small office VoIP system

    Good morning everyone, I am currently defining the architecture for a very simple VoIP network that is to be installed in a small office (about 70 VoIP extensions). Initially, we don't want to include any special feature, just the internal voice IP s

  • I want to create an event on my calendar by creating a spreadsheet.

    I'm currently using an iphone 6 plus. I get my shifts in work printed on a spreadsheet. I was hoping there could be a way to create my own spreadsheet and then export them into a calendar event? I just want to create events so I can easily look at my

  • What is inserting the following code onto pages " div id="bikatoc" style="display: none;" a class="control" Close /a div class="toc" ul li class="toc-h2

    I am doing web development and when working with the wordpress dashboard tiny mce, each time I hit the update button the following piece of code is inserted into the page I am working on. <pre><nowiki><div id="bikatoc" style="display: none;"><a class

  • Returnable packaging a/c posting details

    Hi All experts, could any one of you let me know the correct table to find out the followings: 1. RP(returnable packaging) account header details. 2. RP account item level or transaction details like opening balance, closing balance, bill of lading,

  • IWeb SEO Tools

    I have just opened iweb seo tools and I clicked on Load iDisk Sites. The system asked for my idisk username and password. I now have under "FROM IDISK" Headjam which is my iweb site's name then I have a list of files all with folders, when I click to