Whether 512MB RAM enough for NW2004s ABAP Sneak Preview?

Hi Friends,
I am planning to install NW2004s ABAP Edition in my PC.
I have only 512MB RAM at the moment but the min requirement is 1GB RAM for NW2004s ABAP EDITION.My question is:Is it possible to install with 512MB?..Will it support? or Will it create any problem to my system?
Plz Clarify..
Cheers,
Abdul Hakim

SAP R/3 4.7 runs on WAS 6.2. I understand you have even IDES on top of it. With the newer versions, more and more memory is required. NW2004s is WAS 7.0.
As said, it might happen but it will be very slow.
Regards,
Ravi

Similar Messages

NW2004s ABAP Sneak Preview - SAPGui Problem Resolution

The download for the NW2004s ABAP Sneak Preview has a link for the SAPGui. The Gui that is downloaded is compilation 3, compilation 4 is required. You can get the correct Gui from the Software Download Center (SWDC). You should also download the FEP 1, bw700_1-10001615.exe.

Hi Dave,
try out:
ftp://ftp.sap.com/pub/sapgui/win/640/compilation4/
Regards
Gregor

Online license procedure for NW ABAP Sneak Preview and Mini SAP works again

The online license procedure for the NetWeaver ABAP Sneak Preview and Mini SAP systems at www.sap.com/minisap
works again.
Sorry for the inconvenience.
Dirk

I finally resolved my problem yesterday. That is the answer. I did exactly what you mention now: to try and try. I don't know what happened, but when I insisted it worked !
Anyway, Thanks a lot to all
Investiga

Error Installing NW2004s ABAP Sneak Preview version

Hi!
I have tried to install the NW04s ABAP Sneak Preview version but failed a number of times.
My logfile says:
(Nov 17, 2006 8:15:18 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Nov 17, 2006 8:15:18 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Anyone here who has any bright ideas on what I am doing wrong?
Thanks,
Vicky

I believe that I had to install the jre in order to get the installation to run, but this was when I was installing the SP4 version. Maybe you do need to do it, but I am confused as to why it is not in the instructions. Anyway, lets go that route and see what happens.
Download and install the jdk, this will also have the jre(java runtime envirnoment.
J2SE SDK version 1.4.2_08 or 1.4.2_09 (Sun JDK 1.5 not tested). You can download this from Sun Microsystems at http://java.sun.com/products/archive/j2se/1.4.2_09/index.html. Please note that version 1.4.2_10 may cause installation problems.
Once installed, we need to create a envirnoment variable.
Right-click on My computer, properties, click advanced, enviornment varibles, under "System Variables", click new, name the variable as SAPINST_JRE_HOME, make the value as C:\j2sdk1.4.2_09\jre
The path above will be the directory that the jdk is installed to, so check the file path.
In my case, i have jdk 1.4.2_09, if you use 08, then you need to make that adjustment.
Next, reboot, and try the installation again.
Regards,
Rich Heilman
Regards,
Rich Heilman

NW2004s ABAP Sneak Preview - License Installation - System No. is empty

I have requested extended demo licence for ABAP Sneak Preview. I received the following in mail from SAP.
Your Hardware key      : XXXXXXXXXXX
Your License Key       : XXXXXXXXXXXXXXXXXXXXXXXXXX
License Expiration date: 20060521
SID                    : NSP
Installation-Nr.       : DEMOSYSTEM
When I am trying to install demo (90 days) license using transaction SLICENSE, I get a screen asking for
SAP System:      NSP
Inst. Number:    DEMOSYSTEM
Hardware Key:    XXXXXXXXXXXX
System Number:   <leaving empty>
Expires On:      21.05.2006
Key:             XXXXXXXXXXXXXXXXXXXXX
If I enter the System Number as blank it says "Invalid License Key". On the SLICENSE screen it says
System Number              "System No. Empty"
Please suggest, What value is need to be provided for system number.

Hi Asish,
I had the same problem. After loging off and loging on again, I skipped the field System Number, filling in the other details.
This time the license was accepted. I hope it works for you too.
Best regards,
Peter Lans

NW2004S ABAP Sneak preview version - Report / Bex designer

Hello,
does anybody succeed in using the bex designer or query designer (2004s version) ?
while trying to execute them, i have an issue on disp+work.exe on the server side and no logs available.
regards,
Chea-Lie

Hello,
Just an idea, not sure if it helps. Go through the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37">troubleshooting guide</a>, especially the last part: <b>Kernel dump while generating Web Services and Simple Transformation (XSLT) and problems when upgrading the NSP system from SP8 to SP9</b> and download the patch for the MaxDB that is mentioned there.
Hope this helps.
Regards,
Klaus

Java Add-in for ABAP Sneak preview

Hi Experts,
Would it be possible to install the Java Add-in for the ABAP Sneak preview?
Cheers,
James

hello,
my system is:
OS Windows 2003 server R2
DB MaxDB
SAP ECC 6.0
the log file (java.exe.log) show:
ConfigMainExt state200
TYPE=A
STATE=
INFO_SHORT=java.lang.NullPointerException: java.lang.NullPointerException
at com.sap.ctc.util.UserConfig.addUserToGroup(UserConfig.java:266)
at com.sap.ctc.util.UserConfig.performFunction(UserConfig.java:71)
at com.sap.ctc.util.ConfigServlet.doGet(ConfigServlet.java:74)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
CONFIGURATION=
Thanks,
Hernando
Edited by: Hernando Polanía C on Aug 5, 2011 4:14 PM

Where can I find an Access key for the user with "AS ABAP sneak preview" ?

Hi all,
I have installed AS ABAP sneak preview on my laptop.
I use username "bcuser" and password "minisap". when I try to create some objects like, i.e. Function Group for Function Module, then it ask for an access key.
Where can I find an access key for this ABAP SNEAK PREVIEW for user "bcuser"?
I have gone thru some documents, I know we need to register user in OSS and need to get an access key from the marketplace but can I register this user "bcuser" or it's already register? I need some more specific information to resolve this issue.
Please advise me on above question.
Thanks,
Haresh Solanki

Hi Rich,
I have entered ZH_XYZ as a Function Group name to create a new function group. While I am creating it, it asks for the Access Key. I tries to enter an Access Key here for the first time and it says wrong entry for access key.
Also if I try to create new Function Module, it ask me to select the Function Group. As I couldn't create a new Function Group, I tried to select from existing(from SAP System's FG), still it asks for an access key, I enter the an Access Key here, then also it says wrong entry.
I really got confused with this Access Key thing, can you provide me some insights?
Thanks,
Haresh Solanki

BW in NW 2004s ABAP Sneak Preview

I have already successfully installed the NW2004s ABAP sneak preview and SAPGUI.
Then I logon to the Easy Access using account 'DDIC/minsap', try to execute the BW Workbench/Modeling, an error happens as 'You can only work in client 001'.
I logon with 'DDIC/minisap' with client 001 to try it again, but another error happens 'logical system is missing' and the DDIC can not create logical system and assign it to the client.
What can I do to make BW work?

-quote-
You are right and I need to install SP05 or higher. But the problem is that I don't have account to download the sp from sap swdc.
Do you know where I can get the SP? Is it legal that I use the SP in the NW trial?
Another question is that I create a user named 'BIUser' based on 'ddic', the user can logon to Workbench.But an error as 'username or password is incorrect' always happens when it logon to query designer do you know how to fix it? by the way, I assign the '0bi_all' and 'SP_ALL' to the user.
-endquote-
Hi CF,
Did you ever find out the answer to these questions? I am in the same position; I have a 2004S demo system and am trying to get it running, and I have an OSS ID but it doesn't give me enough access to download software from the swdc. Did you resolve this another way?
-Ken
Message was edited by: Ken Greenwood

Web Services do not work in NSW2004S ABAP Sneak Preview

Guys,
I can't connect to the XMLA service (even though it's active in SICF) in a NW2004S ABAP Sneak Preview. Can you confirm that web services are not available in the Preview?. Will they work if i apply a patch the the SNeak Preview?
Please let me know,
Thanks,
Gili

it will work in 2004s sneak preview.
there were some problems while creating clients (2004S MiniSAP ABAP: SAPGUI crashes when creating a Web Service)
whats the exact error you are getting?
Raja

Is 2 gig of ram enough for a 2011 2,3 ghz mac mini for doing some games? Like GTA IV

Is the standard 2GB of ram enough for a 2011 2,3GHz Mac Mini for doing games? Like GTA IV.
Or do I even have to go for the faster 2,5GHz model?

I have a MacMini Late 2011 with 2.3 GHz I5 and 4GB RAM and I use it as media center... It's enough to play FullHD movies but it uses 256 on 512 MB of (shared)RAM... I don't think that you can use a mini for hard gaming...
But AngryBirds Space on a 60" FullHD TV looks great
edit:
welcome to discussions... i'm a newbie too

Upgrade abap sneak preview 7.0 to 7.01

Hi,
Has anyone upgraded their original ABAP sneak preview 7.0 to 7.01?
I would prefer to do the upgrade instead of reinstall all over again and lose everything that I've built so far.
Any help on the process would be much appreciated.
Thanks,
James

Hello,
Your problem is only HDD.
I ran it with 1 GB RAM, with patient it ran without problems.
No, you just need to donwload files from link and vmware player and also
SLES10SP1VSAP from novell side. How to download Vmware SUSE Linux test drive at link>>
http://www.novell.com/linux/vmware/
See info from file >>
The SAP NetWeaver 7.0 TestDrive VMware Edition works together with:
32bit SuSE SLES 10 SP1 SAP Version found at Novell.
A recent version of VMware Player, Server, Workstation, ESX and Fusion available for a variety of host operating systems supported by VMware.
<<
Info about Novell
http://www.novell.com/documentation/sles10/esd/ii_sap_testdrive_sles10sp1_vmware1.html
Other info>>
http://www.saptechies.com/sap-netweaver-70-java-and-abap-trial-version-on-linux-vmware-edition-tips-tricks/
So hope you will test it.
Best regards,
Peter Nechala

ABAP sneak preview

Hi,
I also want to install ABAP sneak preview. I have downloaded it but I am unable to install as it is looking for D:/ but I have no D:/ drive on my laptop, i have more 10 GB space on my hard disk and 1GB RAM. Is there any way of bypassing this.
Thanks.
Regards
Naveen Agarwal

Hi,
Have resolved the issue of drive. I had to deactivate the CDROM. Still installing. Will post when done.
Regards
Naveen Agarwal

Is it possible to apply service packs to NW04s ABAP Sneak Preview?

Service Pack 7 to NW04s contains the DEMO_REGEX_TOY, which I'd like to install in my ABAP sneak preview system. I have some questions about that:
1. Is it possible to apply maintenance to the Sneak Preview?
2. What service packages need to be isntalled to upgrade the sneak preview rel/level from 7/5 to 7/7: 6 and then 7, or just 7? That is, are those service packs cumulative?
3. I am unable to download the service packs from https://service.sap.com using the download manager. I get an error in the trace output that says, "Unable to Find Certification Path." I have no idea what that means, or how to circumvent that problem. Is there an alternative way to get the Service Packs?
Thanks for any help/guidance you all can provide!

Thanks.
I did manage to download the packs. For others who may have similar difficulties, the solution to my download problem was to specify (in IE) http://service.sap.com as a trusted site. That allowed Download Manager to get the files.
I'll also add that I successfully applied packs 6 & 7, as well as SP 70020 (required to update SPAM before applying pack 7) and am now in business!
(Not sure I have the correct terminology for those - here's the file names I applied: KB70006.CAR, KB70007.CAR, KD70020.CAR)

ABAP sneak preview - BW: what is missing ?

Hi all,
Despite little documentation, I finally managed to get BW working in the ABAP sneak preview (thanks to Re: ABAP Preview and BW).
According to the SDN download page, the announced full edition (J2EE+ABAP) will also include "SAP BW Java Components". Can anyone tell me what these components are and what functionality I am missing with just the ABAP engine installed ? Specifically I'd like to try out the BI SDK. Are these "SAP BW Java Components" required for the BI SDK ?
Thanks,
Cheers,
Heiko

Hi Raja,
please have a look at Topic: BW Standalone Version.
Regards
Gregor

Whether 512MB RAM enough for NW2004s ABAP Sneak Preview?

Similar Messages

Maybe you are looking for