.Whether any FI document will be created during PO?If pl mention entry also

Venu:
Do you mean FI postings/entry during PO creation? If yes, then, no FI postings/entry occur during PO creation. PO creation originates in MM. Not linked with FI at that stage.
Vj
Assign points if info helps

Similar Messages

How accounting document will be created

Hi,
How accounting document will be created as soon as u save invoice? is there any configuration for this or is it SAP standard behaviour..
Please explain....
Regards
Sankar

Hi sankar
In FBN1 we maintain number ranges for the accounting documents
In billing document type details VOFA we have a field document type , which is for the accounting document type, if you keep that field blank system will take by take RV accounting document type and if you enter any other accounting document type in that field then system will take that accounting document type only . But it is better to leave that field blank .
In OBA7 we have all accounting document types details
Regards
Srinath

I recently updated to the OSX 10.8.3 Operating Sistem. I am writing a book and now cannot open any word document I've created. Could not find a newer version of the Microsoft Word Processing Program. Is Pages the next thing? Can I recover my documents?

I recently updated to the OSX 10.8.3 Operating Sistem. I am writing a book and now cannot open any word document I've created with the old system. Could not find a newer version of the Microsoft Word Processing Program. Is Pages the next thing? Can I recover my documents? How?

I'm in the same boat: new to OS X and Mac, and in the middle of a book. I switched because I heard about the the ease of using Mac, but so far, for me, it's been a nightmare. I bought 2011 Office Mac and hate everything about it, the most recent being the inability to open or cut or paste any of my original word files. I understand that this could have easily been done with earlier versions, but not Mountain Lion (which I learned is what OSX is.) Since I work with language, I am amazed at the assumptions of the Apple community. It helps to use common language and explain even the basics.
So all the helpful hints to use the latest version of Office Mac are to no avail. Now what?

Trigger a job based on a job that will be created during runtime

I searched sdn and I did not find any threads addressing my issue(Trigger JOB B after a JOB A which will not be available untill runtime).
My Req:
I have a where in, a JOB 'A' will trigger to execute a BDC session in program A using a SUBMIT ...RETURN statement.
I will have to trigger a different job 'B' using program B, the moment the 1st job runs completed.
I thought this would be possible, by handling the events and trigger the FM in program A after the SUBMIT statement. But the problem is SUBMIT statement would just create the job and return the control back to the program A and immediately call the FM to raise the EVENT. In this case, my job B will trigger and even complete before JOB A could complete successfully.
I tried using AFTER JOB option in SM36 instead of AFTER EVENT. The problem with this option is, JOB A will be available ONLY during runtime and hence cannot schedule program B with the option AFTER JOB.
Any thoughts are highly appreciated.
Thanks for your help.
Best Regards,
Kiran

Hi Thomas,
I programmed the way you mentioned and this triggers both the jobs at the same time.
DATA: number TYPE tbtcjob-jobcount,
      jobname LIKE tbtcjob-jobname.
jobname = 'JOB1'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
    jobname          = jobname
IMPORTING
    jobcount         = number
EXCEPTIONS
    cant_create_job = 1
    invalid_job_data = 2
    jobname_missing = 3
    OTHERS           = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
SUBMIT zhbn_life_premium_summary_rpt
VIA JOB    jobname
      NUMBER number
      AND    RETURN.
IF sy-subrc EQ 0.
    CLEAR: jobname.
    jobname = 'JOB2'.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = jobname
      IMPORTING
        jobcount         = number
      EXCEPTIONS
        cant_create_job = 1
        invalid_job_data = 2
        jobname_missing = 3
        OTHERS           = 4.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ELSE.
      SUBMIT zhbn_life_premium_summary_rpt
      VIA JOB    jobname
          NUMBER number
          AND    RETURN.
      IF sy-subrc EQ 0.
        WRITE: 'job 2 success'.
        jobname = 'JOB2'.
        CALL FUNCTION 'JOB_CLOSE'
          EXPORTING
            jobcount             = number
            jobname              = jobname
            strtimmed            = 'X'
          EXCEPTIONS
            cant_start_immediate = 1
            invalid_startdate    = 2
            jobname_missing      = 3
            job_close_failed     = 4
            job_nosteps          = 5
            job_notex            = 6
            lock_failed          = 7
            invalid_target       = 8
            OTHERS               = 9.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDIF.
    ENDIF.
ENDIF.
jobname = 'JOB1'.
CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
      jobcount             = number
      jobname              = jobname
      strtimmed            = 'X'
    EXCEPTIONS
      cant_start_immediate = 1
      invalid_startdate    = 2
      jobname_missing      = 3
      job_close_failed     = 4
      job_nosteps          = 5
      job_notex            = 6
      lock_failed          = 7
      invalid_target       = 8
      OTHERS               = 9.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
Am I missing anything?
Thanks
Kiran

How to identify whether any data source is created for a table?

hi all,
How to identify whether any extractions is been carried out for a particular table, view or function module(generic extraction)? from r/3.
bcos i need to create an extraction for a table, view and function module. But iam not sure whether any extractions is already been created for those tables, view, function modules??
thanxs
haritha

Hi,
By passing the following values as selection to table ROOSOURCE we can find whether any data source has been created or not .
EXMETHOD = V
EXTRACTOR = Table name
hope it helps..
regards,
raju

How do I transfer files I created during free trial to paid subscription?

I created several documents in FormsCentral using the free trial and now I just upgraded to the monthly paid subscription. When I go back into FormsCentral and try to add features to the documents that I created during my free trial, it tells me to upgrade my subscription. So it's not recognizing that I've upgraded. Do I need to transfer the files over somehow? I hope that I am not going to lose all the work I did in creating these documents during my free trial. Thanks for your help.

Hi gshaveaquestion,
Kindly post this query in FormsCentral forum:FormsCentral
Regards,
Florence

I installed Mavericks Wednesday. Afterward updates were offered for my iWork '09 Apps. I installed them, opened a document, and was asked when I closed it if I'd like to update the file to a near format. I chose "Yes". That document will not open now

It says that a new version of Pages is required. The update in The App Store shows that it is version 5.2 AND that it is installed. Pages claims to be 4.3. What now? Thanks.

Pages v5 and IOS Pages v2.1 introduced a completely incompatible document format that Pages ’09 v4.3 cannot open. That document extension remains .pages for added confusion. Due to Pages v5 missing about 100+ features/functionality that were in v4.3, you may find that the file conversion to v5.2 may have filtered content from your older document format.
In Pages v5.2, use File > Export to Pages ’09 and see what remains.
In the future, with both applications installed on your Mac, a double-click of any Pages document will attempt to open it with Pages v5.2. If you want to open a Pages ’09 v4.3 document, you will need to open it directly from the relevant Open dialog, or by right-clicking on the document, and using the Open With > Pages (4.3) menu item. You have already seen the dialog when you attempt to open a Pages v5 document with the older Pages.
Here in the Pages for Mac community, we are recommending that users strictly continue to use Pages ’09 v4.3 until a time in the future where Apple has reconstructed Pages v5 or v6 into an acceptible WP application.

How to check whether follow on document is created for sc or po,is there any table or fm available?

How to check whether follow on document is created for sc or po,is there any table or fm available?

Hello Venu
Check FM: BBP_PD_SC_GETDETAIL and BBP_PD_PO_GETDETAIL table E_HEADER_REL
Check this: SRM Shopping cart and PO tables link
Regards

Hello, on Mac, when I make a .pdf from a .doc, Acrobat reverses pagination. How do i stop this and get normal order 1,2, 3 ... ? And how will I know whether any good soul has answered, thanks much.

Hello, on Mac, when I make a .pdf from a .doc, Acrobat reverses pagination. How do i stop this and get normal order 1,2, 3 ... ? And how will I know whether any good soul has answered, thanks much.

How are you creating the file, exactly?
And if you don't manage to solve it you can use this free tool I've developed to reverse the page order in Acrobat with a single click:
Custom-made Adobe Scripts: Acrobat -- Reverse Page Order (FREE)

Whether a Recovery-partition and its all contents will be created automatically..?

Please tell me whether a Recovery-partition and its all contents will be created automatically when I install Mac OS X 10.7 on a fully formatted new hard drive?

Gennady Abakyan wrote:
Please tell me whether a Recovery-partition and its all contents will be created automatically when I install Mac OS X 10.7 on a fully formatted new hard drive?
Usually, but there are some conditions that can prevent it. See "Some features of Mac OS X Lion are not supported for the disk (volume name)" appears during installation.
So, I get exactly the same (hidden) Recovery-partition on my Mac mini 2011 as from the store if I delete the hard drive current partitions scheme and create a new scheme with an only one (bootable) partition?
You can't do that, at least not from the Mini, while you're runing from it.
You can, however, remove and/or resize partitions in most cases. See #4 in Using Disk Utility.

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content?

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
Cheers.

You canot easily change your country settings. The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store. You are also restricted to waiting 90 days between country changes.
E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE

My password protected document will not open up so I can type in my password. Any ideas would be appreciated.

My password protected document will not even start to open up so I can type in my password. Any ideas would be appreciated.

My password protected document will not even start to open up so I can type in my password. Any ideas would be appreciated.

Hi sir i have revoked the distribution certificate , and in one of my iPhone app i had used the same certificate if i will upload the next version of same app then will it create any problem or with the new certificate i can upload my next version of myap

hi sir i have revoked the distribution certificate , and in one of my iPhone app i had used the same certificate if i will upload the next version of same app then will it create any problem or with the new certificate i can upload my next version of myapp or not plz tell me as soon as possible

Sounds like you need to ask your question in the developers forums.

Numbers documents will not open it says "will not open during numbers update"

My numbers documents will not open. I keep getting a message telling me my documents will not open while numbers is updating. I have the latest numbers update already downloaded.

open the application "Launchpad":
then click, and hold, on the icon for "Numbers", once the icons start to shake, click the "X" in the top left to remove. Now click anywhere on the desktop to exit this remove/adjust mode.
Open the App Store (menu item " > App Store…")
now locate and install numbers

.Whether any FI document will be created during PO?If pl mention entry also

Similar Messages

Maybe you are looking for