Whether DB restart required for applying one-off patch

Hi All
Whether we need to restart database, after applying one-off patch ( Patch no:6554634). The environment in Oracle 10g R2 on AIX on RAC.

What does the README instruct you to do...Normally it would advice you to restart ur database...
If it is RAC, which way are you applying the patch ??

Similar Messages

Query Regarding Applying One-Off Patches

Hi,
We have plans of doing the following:
Upgrade the databases to 10.2.0.5.0
Apply the 10.2.0.5 PSU 3
Apply a list of one-off patches identified for our environment (which are not included in 10.2.0.5.3)
Query:
If the one-off patches identified to be applied in our environment are available only top of 10.2.0.5.0 and not for 10.2.0.5.3, then which of the following mentioned solutions should be proceed with considering :
Upgrade the database to 10.2.0.5.0, apply the one-off patches available on top of 10.2.0.5.0 and then apply the 10.2.0.5.0 PSU3
or
Upgrade the database to 10.2.0.5.0, apply the 10.2.0.5.0 PSU3, request for one-off patches on top of 10.2.0.5.3 and appy the same
Thanks and Regards,
Santosh

Pl follow the steps is MOS Doc 865255.1 (Best approach for Oracle database patching sequence to latest/required patchset along with CPU/PSU/any-other-one-off patch)
HTH
Srini

Has someone applied the one off patch for-ONS bug 5749953 SIGBUS ERROR

Hello all,
Env:: 10g on Soalris
I need to apply the one-off patch for
Bug:5749953 -- ONS SIGBUS ERROR AFTER INSTALL PATCHSET 10.2.0.3 FOR CRS
Usually for any CPU we issue opatch apply from the patch directory.
and its mentioned in the readme.html as well.
But for this one off patch, there isn't anything mentioned in the readme.html.
All it says is
# 6. Patch the Files
#    6.1 Patch the CRS home files
#    After unlocking any protected files and saving configuration settings
#    you are now ready to run opatch using the following command.
#    As the Oracle Clusterware (CRS) software owner;
#    % opatch apply -local -oh <CRS_HOME>
#    Note: In configuration A, invoke this only on one node.
#    6.2 Patch the RDBMS home files.
#    Alert: The RDBMS portion can only be applied to an RDBMS home that
#          has been upgraded to 10.2.0.3.0.
#    For additional information please read Note.363254.1;
#    Applying one-off Oracle Clusterware patches in a mixed version home
#    environment
#    As the RDBMS software owner;
#    % opatch apply custom/server/5749953 -local -oh <RDBMS_HOME>
#    Note: In configuration A, invoke this only on one node.Could someone let me know from where i should give 'opatch apply' if patch.zip files are unzipped in /export/home/oracle/5749953 ? TIA,
JJ

The patch can always be installed in 2 ways.
1. Do a cd and then run opatch
cd <patchlocation>
opatch apply
2. Else specify the patch location as an argument
opatch apply <full path to the patch i.e the one you do cd above> ...
Both the above styles yield same result.
VJ

PSU and One-off patching on GRID Home

Grid Infrastructure Version: 11.2.0.2
Question1.
Do you apply one-off patches for GI HOME? I have only applied PSUs on Grid Home . I have never applied a one-off patch on a Grid HOME.
So, I thought of downloading a GRID related one-off patch for AIX . So, I looked for
12767231 - AIX-11202-GIPC DISABLE SWITCH PORT FOR ONE PRIVATE NIC,HAIP DID NOT FAILOVERwhich is part of GI PSU 11.2.0.2.4 ( 12827731).
But when I searched for the one-off patch 12767231 in patch search in Metalink, I couldn't find the patch download for this particular bug.
I think you can apply this one-off patch only as a part of PSU. Right?
Question2.
Why on earth should I apply GI's PSU(or one-off patch) on RDBMS_HOME or vice versa?
RAC Databases run on the top of CRS stack.
Although related ,both GRID HOME and RDBMS HOME contain different binary files doing different things. So why should we apply GI's PSU/one-off patch on RDBMS_HOME and RDBMS_HOME's PSU on GRID Infrastructure HOME?
Question3.
We install grid using Grid Installer GUI. When doing a fresh installation of 11.2.0.2 or 11.2.0.3 in a new server , I want to apply its latest PSU as well. When should I do this PSU patching ?
A. Before running root.sh ?
One of last screens we get in Grid Installation is where the installer prompts you to run root.sh (see the screenshot below)
http://husnusensoy.files.wordpress.com/2009/10/camtasiastudio351.png
Should I do the PSU patching now ? ie just before executing root.sh ?
B. or After running root.sh ? ie. After the whole Grid Installation is succesfully complete ?
Edited by: spiral on 05-Jun-2012 17:16

Hello There.
for question number 3. What I do is this:
1. Execute runinstaller for grid, choose to check for patches, and put those patches in a folder, the next install don't need to go to internet, and reuse the 2 downloaded patches avaliable as today for 11.2.0.3.
2. patch GI (Grid Infrastucture home)
3. Install DB Binaries, no db creation
4. Patch DB Binaries
5. Create DB using dbca.
hope this helps.

Patch apply on Windows platforms which bundle one-off patches sets.

Dear All,
I need help from urgent basis, If you have document for patch apply on Windows platforms which bundle one-off patches sets.
For example 10.2.0.3 to Oracle Client patch (7117709) 10.2.0.4 .
Thanks for all

Each patch/patchset has a readme file. This file describes how to apply a patch.
Werner

Authorizations required for applying support packs

What authorizations do you require for applying support packs?

After u successfully downloaded the support pack from the service market place , the 1st authorization u need is for using the client 000.
Only with the client 000 u will be available to import the support pack (ABAP suppotr package) using transaction SPAM. To use all SPAM functions, you require the following authorizations:
S_TRANSPRT
S_CTS_ADMIN
If you log on in client 000, then your user master data contains the corresponding authorizations (inside the authorization profile) and you can use all the functions in Support Package Manager.
For Java u can use jspm tool for applying the support packages for any component and if u want to enhance or upgrade the java components( say from ESS 1.1 to ESS 1.2) then u can do it using sdm tool.
Before applying the pack u need to unpack the abap/java files using the commands in the command- prompt and copy the unpacked files into sap/sid/trans/eps/in folders of ur system.
Also before using the SPAM for abap support pack make sure that u had set ur system as the domain-controller in transaction stms with ddic user and masterpwd.
Go thru this document:-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7a2e4346-0a01-0010-718a-fa846ad19716
Award points if found helpful

Are One-Off patches client specific?

Hi
Are One-Off patches client specific? I have a document which lists the patches applied to Oracle Home on existing server and I have to apply the same patches to a new server that I am building. I searched for all the patches listed but the "one-Off" patch listed cannot be found by the search.
Please let me know.
Best regadds

user130038 wrote:
Hmm... maybe I should have provided a bit more info.
The server i am configuring is 10gR2 (client is still using this release and have extended support - so downloading patches should not be a problem). I have to move DBs from existing server to a new one. Before i do that, I have to install exact same binaries (rel and patches) that have been applied to existing server. The document I have been provided contains list of patches applied to oracle home (10.2.0.5). Among the list of patch numbers, this is the only one I could not find.
The do you have referred to is for 11g not 10g.
Regards
then you need to follow Srini's suggestion regarding cloning the oracle home.

Interim patch and One-off patch

DB version : 11.2
In oracle terminology, Interim patch is same as one-off patch. Right?

Hi;
>
In oracle terminology, Interim patch is same as one-off patch. Right?An Interim Patch (formerly known as a “one-off” patch) is a bug fix (or set of fixes) made available to customers who for business reasons cannot wait until the next Patch Set or new product release to get a fix.
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

Just wondering whether rendering is required for unedited AVI on the Timeline?

I just bought Premiere Elements 11.0. I was currently using Premiere Elements 3.02. In 3.02 When importing a standard AVI File to the timeline, only transitions and Titles needed rendering before exporting to DvD. However, I noticed when doing the same project in 11.0, There is no Red Lines above the titles or Transitions for it to be rendered. When I cliked on Render Project, it seemed it was rendering the entire AVI file and it took a very long time. Is this Normal for 11.0? or is there a Patch I need?

orlandoVideography
Just to add a little bit more to the story of "rendering the Premiere Elements Timeline content".
Given that rendering the Timeline content is for previewing purposes (to get the best possible preview of your Timeline content when it plays back in the Edit Mode monitor. You can do that in 3 ways in Premiere Elements 11
a. Pressing the Enter Key of the computer main keyboard
b. Expert workspace, Timeline Menu at top of workspace/Render Work Area
or
c. The Render tab to the right above the Timeline
You do not have to do this type of rendering for the program to allow you to move forward in the program. But, it is your window of opportunity to catch a problem sooner than later.
But, there are 3 indicators used by the program to tell you whether or not it feels that you have the best possible preview.
a. orange line (red line used in versions earlier than 11) OVER the Timeline content is program indicator for rendering recommendation
b. no colored line OVER the Timeline content and green line OVER the Timeline content are program indicators for "you have the best possible preview".
c. waving your mouse cursor over the Render button above the Expert workspace Timeline results in a pop up recommending rendering if the program decides you are not getting the best possible preview.
The no colored line comes into this when you import a file for the first time to the Timeline and it is a native format. But once you edit this file, orange line with all its implications - render. After this render, that file will then only use the orange/green indicators and not the no colored line for it.
As always, rendering is most appropriate for transitions, effects, titles, and non native formats.
Remember to keep watch for pile ups of the preview files on the hard drive....if you have a SD project, the previews (for photos or video) are DV.AVI 720 x 480 @ 29.97 interlaced frames per second and, for HD project (for photos and video), they are MPEG2.mpeg. 960 x 540 @ 29.97 interlaced frames per second, Upper Field First accompanied by some other files such as .xmp.
And, the program does help out...if you want to render and the program decides you have the best possible preview, then all you will get from trying to initiate Timeline rendering is playback of the Timeline with no rendering.
Then there is the old story of saving/closing a project with a rendered Timeline only to reopen the project and find an orange/red line over the content. Does not happen too often lately, but it can be a puzzlement. More on that other time if necessary.
ATR
ATR

Can we apply one off or any patch in the OWB Home

Hi,
I have OWB and Oracle DB installed in same server.
OWB Version - 10.2.0.3.0
DB Version - 10.2.0.5.0
I need to know that, can we apply CPU/PSU/Oneoff patches to the OWB Home. Is there any patches like that specifically for OWB.
As I am new bee on OWB please provide your inputs on this.
Thanks
V

I get the same issue. I thought that it's a problem in a security - the catalog pane is clear in a union report. But saved filters work in 11g. I migrated catalog from 10g to 11g and I see saved filters in the conditions. But you may add saved filters directly into xml. Go on Tab Advanced and edit Analysis XML. You have to add code like this
<sawx:expr xsi:type="sawx:savedFilter" path="/shared/FOLDER/_filters/FOLDER/FILTER_NAME" name="FILTER_NAME"/> in a right place.

Oracle one off patches for Oracle 10.2.0.4 on AIX

Are the AIX5L patches located at this web page below the same patches you should use for AIX 6.1?
https://websmp107.sap-ag.de/swcenter-3pmain
Database Patches -> Oracle -> Oracle 10.2.0.4 -> AIX5L (64-bit)

Yes.

My macbook air will not switch on any ideas - how much is the support calls for a one off??

I cannot switch on my Macbook Air - It has power to it and it is warm under it - but nothing on the screen and pressing the turn on switch has no effect. Could it be the battery?? The screen?? or what - very annoying as it has only just had its warranty expired. I have been on to support and they want to charge me for the call - but how much??does anyone know the answers to my questions please xx

Take it to an Apple vendor/retailer to arrange for repair.

Compiz required for XGL?

I was just wondering whether compiz is required for XGL or not, or does XGLs eyecandy apply to desktops such as gnome?

stavrosg wrote:
Compiz is required only if you want the fancy effects.
If you "just" want the hardware acceleration for your favourite window manager and one of the rest composite managers, you may go ahead and use it so.
This is what I do sometimes, running xfwm4 and its embedded composite manager over xgl. Works fine.
And it feels stable?

CPU, Security, One of Patches Details for e-business suite

Friends -
Need valuable information for anyone on this below patch details.
CPUs - Quarterly – one Quarter behind >>> Database 10.2.0.3
Security Patches – >>>> Database 10.2.0.3 and E-Business Suite 11.5.10.2
One off patches – >>>> E-Business suite 11.5.10.2
Please advise on this.
Regards
satish

Hi,
The recommended patches for Oracle Apps 11i can be found at:
Note: 123456.1 - Latest 11i Applications Recommended Patch List
Note: 244040.1 - Oracle E-Business Suite Recommended Performance Patches
For CPU patches, please refer to:
Note: 880170.1 - Oracle E-Business Suite Releases 11i and 12 Critical Patch Update Knowledge Document (October 2009)
Note: 790259.1 - How To Get Guidance on Applying the CPU/Critical Patches on 11.5.10 environment ? Upgrade To Rollup 6?
Regards,
Hussein

Applying one track's amplitude properties to another

Hi, I'm fairly new to Audition, and was wondering whether it's possible to apply one track's amplitude properties to a separate track. I've recorded a constant tone, unchanging in pitch, that changes in amplitude. I then have a second track that contains my audio content. At the moment, it contains just pink noise (see image below. Tone is in the top track, noise in the bottom). I was wondering whether there would be any way of masking the amplitude of the noise track with the tone track. I need this for a film project I'm doing; I have a radio in a scene where the camera moves around in one long shot. However, I won't have the final recording for the radio content when I record the shot. Therefore, I want to play a constant tone at a constant volume, and the changes in position of my microphone will result in a changing amplitude to the recorded tone (the whole scene is silent other than the tone, so there will be no erroneous additions to the tone). Could I theoretically then use the tone recorded on set to mask the amplitude of the audio, adding the movement properties to the radio soundtrack?
Thanks in advance, and I apologise if this is simple; as I said, I'm new to Audition.

SteveG, I've had a play around sidechaning the tone track to the audio track using the Dynamic Processing effect. It worked wonders! Thanks for your advice; it was most helpful, and solved my issue. I fiddled around with the settings to provide the best match volume-wise, and produced exactly what I was after. Thanks again.

Whether DB restart required for applying one-off patch

Similar Messages

Maybe you are looking for