Whether Iplanet Application server6.0/6.5 supports EJB2.0

I doubt that whether Iplanet Application Server supports
EJB2.0 Features.
Please reply ASAP.

no it does not support ejb 2.0 ..
ejb 2.0 is expected to be supported in the next major version release ..

Similar Messages

Debugging deployment in iPlanet Application Server6.5

Can any one help me out the proper and efficient way of debugging the deployment process in iPlanet application server 6.5 .Where i can look out for the
debug outputs while deploying

You can use the -verbose (iasdeploy deployapp -verbose fortune.ear) option while deploying your application. This will give you some additional information on the debugging process.
Hope that helps
Vasanth

Migration guide from Iplanet application server

Hi ,
i would like to migrate application to oracle 9ias application server.Curently we are using iplanet application server6.5.
From where do i get some useful documents.
In oracle 9ias faqs , its written that its available on http://ias.us.oracle.com.But the site is not opening up.
If some one has already tried migration please suggest to us as how to do.
Thanks in advance
smita

Please refer to the following url:
http://www.sun.com/migration/sunonetools.html
This should give u a head start on what needs to be done and how,. WIth respect to webserver , i guess you can use it or leave it depending on the architecture you require to deploy your solution.
Hope this helps !

Deploying war file on iplanet application server 6.5

Hi ,
We are trying to deploy WebObjects application on Iplanet Application server server 6.5.
Steps we tried for deployment :
1) War file generated by WebObjects.
2) Started IPlanet Application server.
3) Opened the War file in the deployment tool.
4) Verified that the WAR file to be deployed using the verify option in the deployment tool(Verified successfully)
5) We tried to save the archive, then it throws an error saying "
"Invalid entry compressed size (expected 52 bytes but got 51 bytes)".
We ignored this message and proceeded further by clicking on OK.
6) Deployed the WAR file using the deploy option
7) In the deploy message box, it diplays that the application was deployed successfully.
Then we tried to access the application by trying the following url : " http://localhost/NASApp/<CONTEXT NAME>/WebObjects/<APPLICATION NAME>"
(eg : http://localhost/NASApp/SampleApplication/WebObjects/SampleApplication.woa>)
We are getting the error saying that " GXError". We are not sure whether the the above mentioned url is the correct way to access the application !
What we think the problem in deployment is
i) because of error while saving the WAR file (Invalid entry compressed size (expected 52 bytes but got 51 bytes)
ii) URL not appropriate
Other observations :
We tried to deploy to deploy sample application on Iplanet Application server. All these sample applications are deployed properly without the above mentioned error message. All these application are accessed by typing following url : " http:localhost/NASApp/<CONTEXT NAME>/<APPLICATION NAME>". IN all the sample application, url contains "NASApp" . We are not sure what this stand for and maps to. What we assumed is that it maps to the the iplanet app document root i.e "installedroot/ias6/ias/App"
The exception throw while saving the WAR file is " com.iplanet.ias.tools.buzz.util.ArchiveHandlerException"
Has any body who has tried this can help us?
Thanks,
Raju and Venkatesh

Hi,
First of all the application you are trying is from a WebObjects application server. I don't know how they package the modules and what is the format/file structure. I just went to their site, though they say that the WebObjects applications can be deploy on any J2EE Application server but still how they package and how they write the xml descriptors is not known.
Looking at your exception it seem that first it is something to do the war/jar archive file compression thing (as the deployment tool is not able to read the complete file) then comes the deployment descriptors.
I tried to get a few sample application from their site but I couldn't fine any, it will be great help if you can provide a WebObjects sample app to me (mail it to [email protected]).
Regarding the NASApp string in URL, it has nothing to do with document root of iAS and also installedroot/ias6/ias/APPS dir is not the document root of iPlanet app server, this is the place where it save/explodes all the archives (ear).
See iPlanet App server don't have any HTTP daemon to listen to the HTTP requests, so it needs a web server with a plugin (web connector) to forward the HTTP requests meant for iAS, and this NASApp string in the URL is the key to that.
All the URLs are first send to the iAS plugin (as configured in web server's obj.conf file) and plugin look for this NASApp string (configurable), if it is there in the URL then it converts the HTTP request and send it to iAS over a proprietary protocol (KCP), otherwise it gives the request as it is to web server to process it.
The NASApp string is a iAS registry parameter which you can change any time. And generally the context root part of the URL is the war file name (by default). So the typical URL for any web application (MyWeb.war) will be:
http://<host>:<port>/NASApp/MyWeb/<Servlet_name>.
I don't know why that extension "*.woa" is there. So if you send me a sample war file, I will be able to try it out.
Please feel free to ask further questions.
Sanjeev,
Developer Support, Sun ONE Application Server-India.

Can I install iPlanet Application Server 6 on Solris on Intel

Can I install iPlanet Application Server 6 on "Solris on Intel".
Raj

Hi Raj, 
Sorry but unfortunately the short answer is no. 
The iPlanet Application Server is supported on 
UltraSPARC running Solaris 2.6 or Solaris 8 
or 
Windows NT 4.0 SP 5 
It's also available on HP-UX 11.0 and AIX 4.3.3 
but I don't know on which hardware 
You can check the documentation on http://docs.iplanet.com 
Hope this helps 
Caryl 
Sun Developer Technical Support

When i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"

when i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Context lookup problem in iplanet application server 6.0 sp3?

Hi all,
I am writing codes in the following enviornment, iplanet application server 6.0 sp3 with iplanet web server 4.1 sp7 in Window 2000.
When I tried to login to the system, error occured when i try to lookup context for my session bean.
The error message is as follows:
login_process.jsp: Home / Remote Error:String index out of range: -7
[10/Apr/2002 18:09:10:5] error: Exception: SERVLET-execution_failed: Error in ex
ecuting servlet JSPRunnerSticky: java.util.EmptyStackException
Exception Stack Trace:
java.util.EmptyStackException
at java.util.Stack.peek(Stack.java:86)
at java.util.Stack.pop(Stack.java:68)
at com.netscape.server.deployment.AppComponentDescriptorUtil.popCurrentAppComponent(Unknown Source)
at com.netscape.server.servlet.servletrunner.AppInfo.popWebAppDescriptor(Unknown Source)
at com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown Source)
at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)
could anyone suggest a method to solve the problem?
Thx very much!

There is a major security breach in authenticating
iPlanet Web Server 6.0 SP3 and SP4 using Sun ONE
Directory Server. Using a valid user id, any
password except null string would allow user access
the restricted resources. iPlanet Web Server 6.0 SP5
and 4.1 SP12 worked fine with similar configuration.Did you get an answer for this?
We are having the exact same problems with our iPlanet Web server 6.0 SP3.
thank you.

How to determine the source to where my saved photo (not taken by my iPhone camera) on whether what application or website did i got that photo? need to go to the source again, please help

how to determine the source to where my saved photo (not taken by my iPhone camera) on whether what application or website did i got that photo? need to go to the source again, please help

There is no way to trace the source of a saved photo.
You might have some luck if you search through the Safari web site history available via the Bookmark icon.

Application Server Supporting EJB2.0

Hi
I am using Websphere4.0 as well as Weblogic 5.1 .
I want application server which support EJB2.0 spec (especially i want to try out LocalInterface Examples.)
I want evaluation copy which i can down load.
I have installed J2EE server 1.3 : For this can anybody tell me about Jars to be set in Class-Path.
Thanx
VJ

You can try Oracle Containers for J2EE (OC4J) at otn.oracle.com/tech/java/oc4j
this is a J2EE compliant server. But still have an whole implentation about EJB 2.0 (OC4J Developer Preview), However you can try Local interface, CMR, and other features EJB 2.0-specific.
OC4J is 100% Java implemented. You can launch the OC4J server separately or embebed in the Oracle9iAS (Oracle9i App. Server).

Can't Load 3rd Party JDBC in iPlanet Application Server

I am trying to use a 3rd Party Type 4 Oracle JDBC driver to connect to a database in iPlanet Application Server 6.0 SP3. I used the jdbcsetup.exe tool to register the driver and used the iAS Administrative Tool to Register the Datasource.
External JDBC Driver Parameters:
Driver Type: OracleConnectionPoolDataSource
Driver Classname: oracle.jdbc.pool.OracleConnectionPoolDataSource
Driver Classpath: c:\src\jdbc\lib\classes111.zip
DataSource Registration Parameters:
JNDI Name: OracleConnectionPoolDataSource
DriverType: OracleConnectionPoolDataSource
DatabaseURL: jdbc:oracle:thin:@decipher:1521:csi
Code to Access datasource (Note: dsName=OracleConnectionPoolDataSource):
try {
// Define JNDI InitialContext object.
InitialContext ctx = new InitialContext();
ds = (DataSource)ctx.lookup("jdbc/" + dsName);
dbConn = ds.getConnection();
//requires all sql Statements to be manually commit(ed)
dbConn.setAutoCommit(false);
if(dbConn!=null)
System.out.println("Getting a connection from dds.");
catch (Exception e){
e.printStackTrace();
The Error that I am getting:
[22/Aug/2002 15:43:51:9] info: RLOPMGR-005: OracleConnectionPoolDataSource: CALLBACK FAILED: CreateObject
java.sql.SQLException: A. Couldn't load or create 3rd party class: oracle.jdbc.pool.OracleConnectionPoolDataSource
at com.netscape.server.jdbc.Driver.connect(Unknown Source)
at com.netscape.server.jdbc.ConnectionPool.createNewConnection(Unknown Source)
at com.netscape.server.jdbc.ProxyEvaluation.createObject(Unknown Source)
at com.kivasoft.rlop.ObjectPool.reserveObjectnative(Native Method)
at com.kivasoft.rlop.ObjectPool.reserveObject(Unknown Source)
at com.netscape.server.jdbc.ConnectionPool.getFromPool(Unknown Source)
at com.netscape.server.jdbc.ConnectionPool.getConnection(Unknown Source)
at com.netscape.server.jdbc.DataSourceImpl.getConnection(Unknown Source)
at com.netscape.server.jdbc.DataSourceImpl.getConnection(Unknown Source)
I would greatly appreciate any help on why I am getting this error. I am desparate!

I'm sorry but I'm not an expert......
As you know Classes12.zip contains two dir "javax" and "oracle".
So my path for driver is "/servers/jdbc/classes12.zip (or wath is contains).
In classpath variable in iasenv.ksh I put /servers/jdbc but it doesn't work.
I tried with /servers/jdbc/oracle/driver.....the same
Can you help me again
Thank you very much!
Massimiliano

The application version J2EE_1_4_OR_LESS is not supported

Hi All,
What does the below shown exception mean? Please help.
I found the below shown exception in the Netweaver 7.1 logs:
com.sap.tc.jtools.jlinee.orpersistence.model.ORPersistenceModelBuilder##com.sap.tc.jtools.jlinee.orpersistence.model.ORPersistenceModelBuilder#Administrator#244####f9b12dc0ca1311dccbed0050568211b5#1     Telnet unknown            Wed Jan 23 16:32:01 PST 2008##0#0#Debug#1#/System/Server#Java###The application version J2EE_1_4_OR_LESS is not supported.
No persistence units, if any, will be processed for this archive.
[EXCEPTION]
#1#java.lang.Throwable
            at com.sap.tc.jtools.jlinee.orpersistence.model.ORPersistenceModelBuilder.build(ORPersistenceModelBuilder.java:64)
            at com.sap.tc.jtools.jlinee.lib.model.impl.AbstractModelBuilderTest.execute(AbstractModelBuilderTest.java:48)
            at com.sap.tc.jtools.jlinee.lib.framework.dependency.Node.execute(Node.java:211)
            at com.sap.tc.jtools.jlinee.lib.framework.JLinEETestProcessor.executeAll(JLinEETestProcessor.java:153)
            at com.sap.tc.jtools.jlinee.lib.framework.JLinEETestProcessor.execute(JLinEETestProcessor.java:123)
            at com.sap.engine.jlinee.lib.impl.TestManager.executeTestsForAppComponent(TestManager.java:153)
            at com.sap.engine.jlinee.lib.impl.TestManager.executeTests(TestManager.java:88)
            at com.sap.engine.jlinee.lib.JLinEEValidatorImpl.validateApplication(JLinEEValidatorImpl.java:143)
            at com.sap.engine.services.deploy.server.validate.jlin.impl.JLinPluninImpl.exec(JLinPluninImpl.java:78)
            at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.validateApplication(DeployUtilTransaction.java:342)
            at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:241)
            at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:215)
            at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:384)
            at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:418)
            at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:2194)
            at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:318)
            at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:275)
            at com.sap.engine.services.dc.gd.impl.ApplicationDeployer.deploy(ApplicationDeployer.java:109)
            at com.sap.engine.services.dc.gd.impl.InitialApplicationDeployer.performDeployment(InitialApplicationDeployer.java:113)
            at com.sap.engine.services.dc.gd.impl.InitialGenericDeliveryImpl.deploy(InitialGenericDeliveryImpl.java:55)
            at com.sap.engine.services.dc.cm.deploy.impl.OnlineDeployProcessor.performDelivery(OnlineDeployProcessor.java:160)
            at com.sap.engine.services.dc.cm.deploy.impl.BulkOnlineDeployProcessor.deploy(BulkOnlineDeployProcessor.java:48)
            at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor$DeployProcessorHelper.visit(AbstractDeployProcessor.java:178)
            at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
            at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor.deploy(AbstractDeployProcessor.java:77)
            at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:631)
            at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:488)
            at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:209)
            at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:154)
            at com.sap.engine.services.dc.cmd.telnet.impl.deploy.DeployerCommand.exec(DeployerCommand.java:238)
            at com.sap.engine.services.dc.cmd.telnet.impl.deploy.DeployerCommand.exec(DeployerCommand.java:181)
            at com.sap.engine.services.shell.processor.environment.CommandBase.exec(CommandBase.java:132)
            at com.sap.engine.services.shell.processor.Interpreter.applyLineCommand(Interpreter.java:401)
            at com.sap.engine.services.shell.processor.Interpreter.apply(Interpreter.java:153)
            at com.sap.engine.services.shell.processor.Shell.work(Shell.java:148)
            at com.sap.engine.services.shell.processor.managers.ShellProcessThread.run(ShellProcessThread.java:114)

Please refere back to your installation guide for your respective Netweaver System. NW 7.1 is not compatable with Java 1.4, it requires at least a java version of 1.5 to operate. If you use the 'java -version' command, this will tell you what your current java release is.
If this answers your question, please set this thread to answered.

Whether our application caused the memory leak

whether have the command to find out whether our application caused the memory leak !
We are using Jdev10g + JHeadstart(Release 9.0.5.1, BC4J + Struts + JSP) to build our enterprise application,
but when the application running some days in our Application Server(RedHat AMD64, with 8GB RAM), the memory consumed was growth seriously in production environment (one OC4J instance will caused almost 2G memory ulilization after running 2 days) that is caused us to restart the instance each day ! we doubt and worry
about maybe our application suffer the memory leak problem, so we want to know have the command to find out whether our application caused the memory leak
issue and which program is the major murderer for memory.

Ting,
Unfortunately there is no 'command' that will show you the location of a memory leak. First I would scrutinizing your code for any obvious 'leaks'. Then, you should obtain some statistics about the usage of your system. One important aspect is how long a HttpSession usually lives. If you have thousands of users that stay online the entire day and never 'time out', and if you have users on the system 24 hours a day, then the sheer number of HttpSessions might be a problem.
JHeadstart 9.0.x tends to have rather 'heavy' session objects. This can easily be solved by adding some actions to clear up DataObjects and DataObjectSets of previous 'Groups' when entering a new Group. A good place would be between the 'DynamicActionRouter' and the 'ActionRouters'. Just before entering the 'EmployeeActionRouter', you could remove all DataObjects and DataObjectSets that might be left on the Session by actions of the other ActionRouters.
Also it would be interesting to see if the garbage collector can do its thing when the system is less busy. For instance, if your application has a smaller load during the weekend, what is the memory usage on Sunday at midnight compared to, say, Friday at noon. Has the memory load dropped consistently with the decreased number of online users, or does too much memory stay allocated? If so, then there's more going on than just HttpSession objects.
If all this does not lead to a solution, I suggest using a profiling tool such as OptimizeIt to investigate the memory usage of the application in detail.
Kind regards,
Peter Ebell
JHeadstart Team

IPlanet Application Server 6.0 Service Pack 3 Test Drive

Hi,
We are trying to port an existing web-app (runs on WebLogic and JBoss)
to the iPlanet Application Server platform.
We can deploy our app, but cannot access it once it is deployed.
Is the iPlanet Application Server 6.0 Service Pack 3 Test Drive "cripple
ware" or is it a fully functioning trial which allows you deploy new
apps to it?
Thank You,
Eric Kahler

Hello,
If the issue is looking up the bean and you are looking up the bean as you
would with JBoss or BEA:
String beanName = "Bean";
ctx = InitialContext();
ctx.lookup( beanName );
then you might have the problem there. Atleast this is what we have found
with beans needing to be convered. Change the lookup to be ctx.lookup
("ejb/" + beanName ); and you might be better. I haven't tried it on JBoss
or Bean but ctx.lookup( "java:comp/env/ejb/" + beanName) might work on all
the different app servers
TTYL, Jeff
"Eric Kahler" <[email protected]> wrote in message
news:[email protected]..
Hi,
We are trying to port an existing web-app (runs on WebLogic and JBoss)
to the iPlanet Application Server platform.
We can deploy our app, but cannot access it once it is deployed.
Is the iPlanet Application Server 6.0 Service Pack 3 Test Drive "cripple
ware" or is it a fully functioning trial which allows you deploy new
apps to it?
Thank You,
Eric Kahler

What is different between setup.exe and ezsetup.exe for iPlanet Application server 6.0 SP3?

iPlanet Application server 6.0 SP3 for windows versions.

Hi,
setup.exe has 3 types of installation modes, namely, express, typical and custom. But the ezsetup doesn't asks these questions. The difference between them are..
Setup.exe - Express - Asks fewer questions like, iAS username password, directory server username, password, product key etc
Setup.exe - Typical - Asks for same questions as of Express setup and few more additional questions and allows you to install iAS and use a directory server which is already installed.
Setup.exe - Custom - The most complicated and the highly interactive installation where it requiress 32-33 inputs from the user and fully customisable.
EzSetup.Exe - Doesn't have any sub option, doesn't allow you to use the existing directory server or web server, all it asks is 2 questions..., which directory to install and the product key.
Hope this helps.
Regards
Raj

Iplanet application server 6.5 on windows xp

I'm trying to install iplanet application server 6.5 on windows xp. but for some reason it just hangs at the end of the install. Leaving my no choice but to quit the instalation. Has anyone sucessfully install 6.5 on xp? and could anyone help? would be appreciated.
Thanks in advance...

I've just spent a day or two mucking around with getting the iPlanet 6.5 Application Server install running with IIS on XP, and have got as far as having the "fortune" application running. I also encountered the "hanging installation" problem on my 5th or 6th reinstallation. Here is my checklist of things to do:
1. As has been pointed out earlier, you must have a static IP address assigned to the machine you are installing on.
2. You should set up IIS before installing iPlanet - during the install you'll be prompted to set up the Web Connector for IIS.
3. If you find that the install hangs at the end (seems to be in the middle of building the Start Menu shortcuts), then deinstall from the Control Panel | Add Remove Software and run the install in Windows 2000 compatibility mode - this article lays out how to start applications in compatibility mode:
http://www.microsoft.com/windowsxp/using/games/expert/durham_og.mspx
4. You need to switch IIS to run in-process as per these instructions:
http://docs.sun.com/source/816-5788-11/app1.html#14411
see the section "Registering the Plug-in on IIS 5.0 running on Windows 2000".
Note that in XP the tab is called "Directory" rather than "Virtual Directory" and ensure that you grant Execute Permission to both Scripts and Executables (default is just Scripts I think)
5. You need to grant security permissions to the registry key
\\local machine\\software\\iplanet\\Appserver\\6.0\\CCS0\\HTTPAPI
as per the post by Vaidyanathan Iyer :
http://swforum.sun.com/jive/thread.jspa?threadID=20660&tstart=90
Regards

Whether Iplanet Application server6.0/6.5 supports EJB2.0

Similar Messages

Maybe you are looking for