Whether is it possible for using multiple factory calender

Hi gurus,
my plant is using a factory calender which working 24hrs
As an mm consultant I want the goods reciept should be done only in week days (monday to friday) and not in sat and sunday. is possible to configure another factory calender for this purpose if so where i have to configure? your valuable information is highly apprieciated.
Thanks and regards
Prabhul

Thank you Nathan for your immediate response.
The problem is planning calender is specified for a particular material. I want it to be working in all materials. ie it should be in plant level.
Thanks and Regards
Prabhul

Similar Messages

  • It is possible to use multiple iPads in my own enterprise and to create an app just for my restaurant not in appstore???

    It is possible to use multiple iPads in my own enterprise and to create an app just for my restaurant not in appstore???

    Yes that's completely feasable.
    Actually there is another way to install apps ad-hock that i was not aware of (this does not require the devices to be attatched to the Mac with the SDK and project, it can use any computer or distribute via your LAN:
    iOS Developer Programme:Ad Hoc Distribution
    With Ad Hoc distribution you can share your application with up to 100 other iPad, iPhone, or iPod touch users. Through email or by posting it to a website or server, users can download and install your app.

  • Can i create additional apple id's using the same email address for using multiple products with iCloud?

    can i create additional apple id's using the same email address for using multiple products with iCloud?

    Hi Anne,
    I'm pretty sure different eMail addies are needed for different Apple IDs.

  • Best Practice for using multiple models

    Hi Buddies,
         Can u tell me the best practices for using multiple models in single WD application?
        Means --> I am using 3 RFCs on single application for my function. Each time i am importing that RFC model under
        WD --->Models and i did model binding seperately to Component Controller. Is this is the right way to impliment  multiple            models  in single application ?

    It very much depends on your design, but One RFC per model is definitely a no no.
    Refer to this document to understand how should you use the model in most efficient way.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/705f2b2e-e77d-2b10-de8a-95f37f4c7022?quicklink=events&overridelayout=true
    Thanks
    Prashant

  • Hello guys. I'm on the fence of buying a new Haswell MacBook Pro Retina. I'm a student so i plan to get it with the student's discount. I want to ask you guys whether is it possible to use debit card to purchase anything from apple online store?

    Hello guys. I'm on the fence of buying a new Haswell MacBook Pro Retina. I'm a student so i plan to get it with the student's discount. I want to ask you guys whether is it possible to use debit card to purchase anything from apple online store? Im using CIMBclicks debit card. Thank you.

    Call the online store and ask them!  We are just users like yourself.  Besides, you will get a much faster answer directly from the horses mouth and it will be correct!

  • Is it possible to use multiple displays on mac mini?

    Is it possible to use multiple displays on mac mini?
    I have a mac mini that I think is from 2009. The processor is 2.26 GHz Intel Core 2 Duo and 2 gb memory that I´d like to use with multiple displays (2). Is this possible??

    Baddoll wrote:
    Is this possible??
    yes.
    connect monitor #1 with the Mini DVI to DVI adapter (should have come with your Mini)
    connect monitor #2 with the mini-displayport to DVI adapter (needs to be procured separately)

  • Is it possible to use multiple hard drives with iphoto?

    I am pretty new to Mac's so bear with me, I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives. Is it possible to run iphoto with multiple hard drives without the photos loading onto my Imac? If so, How do I set it up. I have tried importing to a external drive, but when I check the file path of the photos it shows my Imac hd in the address. I seriously dont know why I cant just add the external hard drive as a library and have Iphoto work, Help

    There are instructions - and not the caveats - on how to do what you want below.
    However, you'e not quite grasping iPhoto:
    I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives.
    When you do this, you're using the Finder (or file manager) to categorise the photos. All well and good, but why? That's exactly iPhoto's job. iPhoto is a database designed to help you manage your pics - including categorising them.
    Anyway:
    *How to do it:*
    Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
    *What Happens:*
    Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
    *Some things to consider:*
    1. Importing and deleting pics are more complex procedures. You have to to put the files where they will be stored before importing them. When you delete them you'll need to remove the files from the HD yourself.
    2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
    3. Most importantly, migrating to a new disk or computer can be much more complex.
    4. *Because iPhoto has no tools for managing Referenced Files, if, for some reason, the path to the photos changes then you could find yourself resolving aliases for +each photo in the Library+ one by one.*
    My own opinion:
    I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers
    If disk space is an issue, you can run an entire iPhoto Library from an external disk:
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    If you're concerned about accessing the files, There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 and later*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and later* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    For users of 10.6 and later:
    You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and later:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    If you really want to spread your photos across volumes like this, Aperture would be a better fit.
    Regards
    TD

  • Is it possible to use multiple proxies simulatneously?

    I have access to four different proxy servers within my college. (Squid I think)
    Each proxy has limitations on the number of simultaneous GET requests (4 I think. When I set anything higher
    in Firefox images don't load, etc..) and allows only http and https traffic.  I was thinking if it was possible to use
    all/at least more than one proxy at a time to improve speeds.
    Does wget/aria2c have this capability? To download segments of a file from different proxies simultaneously instead of just one?
    I'd seen the manpages but as far as I can tell they use only one proxy server at a time (usually through environment variables)
    In fact I'd be happy if I were able to get good download speeds for pacman updates using multiple proxies.
    I've heard of network interface bonding but it looks like a lot of trouble to set it up (kernel recompilation! )
    Is http://www.cyberciti.biz/howto/question … -howto.php the way or is there any other?
    Just thought I'd know all possibilities before compiling kernels and stuff..

    I don't know if aria2 can use multiple proxies simultaneously, but if you want to download packages quickly through multiple proxies, you could do the following in a script:
    generate a metalink for your packages using powerpill
    split the metalink into separate metalinks with roughly the same download volume in each one
    launch separate instances of aria2c for each metalink, each set to a different proxy
    If you try this, don't forget to change the connection settings in the powerpill configuration file (or when you split the metalink) to avoid more than 4 connections per proxy.

  • Possible for using profiler for creating workload for Database Engine Tuning Advisor in case of SSRS reports

    I have SSRS reports with each 5 parameters. Parameter datasets includes statements like WHERE @CategoryKey
    I have 20 tables in SQL Server. We don't have OLAP cube.
    I have created SQL Server Profiler trace. I have clicked all reports during process.
    I have opened Database Engine Tuning Advisor.
     I have selected all tables to Tune.
     Tuning options are Indexes/No Partitioning/Keep all existing PDS
    Result is following:
     14% improvement
     10 recommendations (8 statistic for Calender table and 2 index for Calender)
    Tuning logs:
    S008 exec sp_executesql N'  LongSQLStatment including IN (@CategoryKey) Event does not reference any tables
    S007 Replaced event exec sp_executesql
    My question is that why I did not get any recommendations for other tables that Calender?
    Could it be because of SSRS parameters like @CategoryKey?
    Is it possible at all to use SQL Server profile for creating workload in case of SSRS reports with parameters?
    I have tables and reports like ProductSales, which I suppose should be get indexedbecause of WHERE statements.
     I have where statement like Month and Category and Color.

    Yes it is possible to capture a trace using profiler, but please provide the t-sql behind your dataset before I can answer your question about the DTA recommandations.
    Regards
    Rasmus Glibstrup
    http://blog.sqlguy.dk

  • Is it possible to use multiple css files in epub?

    For fixed layout I would like to use multiple css files.
    Is it allowed  by apple requirements?

    Yes. ePub suports multiple CSS files and therefore so does Apple iBooks.

  • HT201060 Is it possible to use multiple credit cards with family plan?

    Is it possible to use my own credit card vice my wife's card to make iTunes purchases while part of a family plan?

    This page implies not, only a balance on your account would be used, not a credit card : Family purchases and payments - Apple Support
    After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card.

  • Is it possible to use multiple macs/iphones/ipads with single apple tv for an exhibition?

    Hellow everyone,
    Wondering if some genius out there can help me come up with a solution, or whether this is just too pie in the sky!!
    So, I'm exhibiting at a huge conference at the end of the month and want the following set up:
    MacBook Pro Retina showing a video loop through AirPlay Mirroring
    MacBook Pro showing exmaples of my work in safari photoshop etc through AirPlay Mirroring
    iPhone (4s with iOS7) to show examples of my work in safari through AirPlay Mirroring
    iPad (iPad 2 with iOS7) to show examples of my work in safair through AirPlay Mirroring
    So, basically I want the video loop to play constantly and act as a screensaver almost, then when the sitution dictates I can quickly switch what is being shown on the AppleTV to whichever device I am at.
    As an example, the video loop is happily playing. Someone comes up to me and wants to talk about responsive web design. I whip out my iPad and load up an example site in safari. if I turn on my AirPlay Mirroring, great the AppleTV will update and show what is on my iPad. Great, but what about when I've finished with this person. I turn AirPlay Mirroring off on my iPad and the ApplTV goes back to the main menu because it has kicked out my MacBook Pro. Imagine this scenairo happening time and itme again.
    The question is, is there anyway of making some kind of heirachy where my MacBook Pro with the video is the default source, then the Apple switches depending on what is selected, then reverts back to the MacBook Pro??
    Or, is there a neat little app that I can run from another iphone (almost using is as a remote) to select which source the Apple TV shows and all the devices are constantly running AirDisplay?
    Possibly asking a bit too much here, but it would be amazing if I could get some form of solution that allows me to use minimum wires and no fidly changing channels on the tv with a remote!!
    Many thanks in advance!
    David

    take have to take turns
    and you have to disable one and enable the other manually

  • Recommended design for using multiple PGs for one ACD

    Ref:  ICM 8.5 with Avaya Aura CM 6.3 and AES 6.3
    We have been told by Cisco that we should not have more than 3000 agents+CTI on our current PG pair.  Since we project we will exceed 3000 agents before the end of the year, we are planning to add another PG pair (with CTI).  We have several different lines of business so we just assumed that we should migrate some to be exclusively on the new PG pair.  Of course, that means we will also have to Translation Route calls transferred between the LOB. 
    This set us to thinking that there might be a better way.  Does anyone here currently deal with ICM and an Avaya ACD with more than 3000 agents?  If so, can you please share your architecture?  Specifically, do both of your PG pair share the same AES with different Signal ID?  If so, do you share or separate the Switch Links?
    Thank you in advance for taking the time to respond.

    Thanks for responding, Chris.  We are not using CUCM.  We have Avaya Aura CM.  As such, our Cisco Sales Engineer was quite definitive that our PGs will support 3000 with CTIOS.  We do not use CAD.
    The dual-PG design was our plan.  However, my question is more about whether each PIM needs a separate AES Signal ID and, if so, whether each Signal ID needs a separate CTI link.  I know those are more Avaya-specific question but I'm hoping there is someone on here with a similar environment.
    I had an additional thought today:  It is possible to configure PIMs on two different servers with the same Logical Controller ID such that we would not have to change any Translation Routes.  The Services and SkillGroups would still be separate, of course.

  • Is it possible to use multiple log on IDs with OID?

    First a little background on our environment. Our users currently have two seperate identities on our network. The ID used on our SUN JES (Mail and calendar) is made up of a combination of lastname and initials whereas our Oracle portal users are recognized using a numeric ID ie. 223044432. There is a one-to-one correspondence between the accounts, everyone with a mail account has a corresponding portal account. For example, I'm recognized as bouchers for mail but as 223044432 for my portal account.
    We now have a requirement to unifying these identity. All new accounts will be using the numeric pattern on both JES and Portal. Management wants us to grandfather the old account names and for a period of time allow users to log-on to the portal using either the old user name or the new one. Is that possible?

    Should be possible by setting up account synchronisation from Sun to OID, and changing the mapping rules. Basically, you end up with two accounts; either both in OID, or one in OID, the other one in Sun. The latter reuires a mechanism to authenticate against Sun when OID fails - don't know if that is possible (struggeling MS AD myself - that is doable)

  • Is it possible to use multiple encryption algorithms in Oracle 10g RAC?

    We have two separate databases on same physical servers, running 10g RAC Using TDE, is it possible to have different encryption algorithms for each database?

    It is possible to have every column in a single table use a different algorithm.
    Take a look in Morgan's Library (www.morganslibrary.org/library.html) under
    Wallet
    Transparent Data Encryption
    SecureFiles
    DBMS_CRYPTO
    and perhaps a few other topics.

Maybe you are looking for