Whether it is possible to replace a video card in imac 21.5 not the base?, Whether it is possible to replace a video card in imac 21.5 not the base?

please help

No you cannot. Even if you were savvy enough to pry it off the logic board (which, in most iMac models, it is soldered to), a different card would not be supported by your other hardware.

Similar Messages

Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

Lindsay,
Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

Is it possible to Replace audio in a video without re-importing and re-exporting ?

Hi..
i have exported a video of 2 hours length.. Then i just feel i need to replace the audio with another audio file which has small tweaks in it.. Can i replace the audio in the video i exported without having to reimport the video into fcpx and re-exporting ??
can i do this ? is there a way to replace audio ? any external apps available ?
Do let me know.. Thank you !
Regards,
Arun Kanth

If you're set against reimporting/exporting: Quick Time Pro should accomplish what you're trying to do. It's a $29 license, but is much more useful than QTX and is a tool worth having if you don't already/
http://re-sounding.com/2012/01/05/replacing-audio-track-qt/
Russ

Is it possible to replace a video in a cpvc project?

I have a number of text boxes and smart shapes I created in a video demo project. I made a number of errors in my first video demo so I just wanted to replace the existing video with my corrected one and then just re use the existing text boxes and smart shapes. It would let me add an PIP but not replace the original video. Unfortunately I want to use pan and zoom as well and that doesn't work on a PIP. Any workarounds or advice?

Hi there
The simplest way would be to split the initial video at perhaps half a second and delete most of it. Then click Insert > Video Recording and record the new sequence. After you record the new sequence you are then free to delete the remainder of the initial video.
Cheers... Rick

HT4623 My 5.1.1. 28.6 Gb IPad crashes about every 5 minutes or so it doesn't matter what I am doing, whether it is fully charged, plugged in or needing a charge. It is the first version, is it possible I need to replace it?

I have had my iPad for several years and recently it has started crashing for no reason, I am wondering if I need to replace it of if there is a fix. It doesn't matter if it has a full charge or if the charge is low. I have noticed that the battery does not hold a charge for very long now so maybe the battery is going bad? Any thoughts?

It's possible that the battery needs to be replaced. If you bought one of the original iPads, it could be close to four years old now so the battery might be bad.
Have you tried any basic troubleshooting steps? Sometimes closing Apps and resetting the device can help. Clearing Safari wouldn't be a bad idea either.
Go to Settings>Safari>Cookies and Data.
In order to close all apps, Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Apple has has a battery replacement policy that you can look into. I would make an appointment at an Apple Store and ask a Genius to look at your iPad and see if he/she can recommend something different or maybe even restore the device for you to get it back to good running condition again.
Apple - Batteries - Battery Replacement

Is it possible to create a SD project and then replace the video later with HD?

There are a few reason why I want to do this. One is to speed up editing in CS3 and the other is to produce both DVD and BVD discs as the final product.
My idea was to create a SD project, complete the edit and export the SD master for the DVD. Next I wanted to off-line all the files and then batch capture the video again as HD. In an experiment I found that I needed an HD project so I copied the SD project into an HD project. However, I was not very successful -the captured HD had to be rendered and was not seen as the right format.
Can you tell me if the idea is daft or if there is a correct way of doing this in CS3?
Thanks, Tim

I tried my HD project in CS4 recently. The HD was fine, as expected. I then exported to MPEG-DVD in the media encoder to make the SD version. When I tried this last year in CS3 the SD verion was not very good (understatement). However, the SD version I made from CS4 was very good quailty. Either CS4 has improved greatly or I am now using it properly. So no more HD/SD projects for me. I will edit in HD and export to SD when I have finished.
Tim

I am pretty sure my video card has gone bad in my macbook pro, I want to retrieve data before replacing it. Is this possible?

My video card has failed and I want to retrieve photos. Can this be done?

Welcome to Apple Support Communities
I wouldn't worry about that. Take your Mac to an Apple Store or reseller and let them repair your Mac. If it's a GPU failure, your hard drive is OK, and you will have the same hard drive with the same data after getting the MacBook Pro repaired.
However, it's recommended to make a backup. As you can't start up your Mac, what you can do is to take out the hard drive and connect it to another Mac through a USB to SATA adapter, so you can recover your files

I want to buy iPhone 5 but i have one question that is i have just seen a video on youtube showing laser keyboard and holographic display. is it possible in iPhone 5 and if possible then whether this function is available in iPhone 5 or not...!

Laser keyboard and holographic display

There were some folks marketing a laser "keyboard" for computers a while ago. It is not beyond the realm of possibiity that somebody made one with a Bluetooth interface that could talk to an iPhone. It might well be beyond the average person's means to pay for it, though.

Span to 2 monitors w/ExpressCard PCI-Express Video Card? Possible?Probable?

Hey guys. I had screen-real-estate envy a few months ago and talked myself into thinking I could live without a laptop and just drag my new 20" iMac around once every week or two when I do Keynote Teaching. The sucker's 25lbs and has sharp edges and a lot of cables, it's a huge hassle to set up and haul around.. it's no laptotp replacement, although I do adore the screen. This has brought me to my current plan to sell the iMac eventually and buy a MBP, which I'll want to span to a bigger LCD. But my real dream of the last 10 or so years is to have 3 monitors going at the same time. When I saw that the ExpressCard slot can interface with both USB2.0 AND the PCI-Express bus I started using my imagination on how I could have 3 monitors going without having to spring for a PowerMac.
So the question is, any discussion about an ExpressCard video card? Any in production? Anything theoretically wrong with this concept? Probability of it happening, time frame? Prognosticate away!

Yo! Don't post the same question twice, OK?
I posted a reply to the earlier occurrence of your
post. Check it out.
RRS
Yeah sorry if it's at odds with your forum sensibilities, but I felt that this question fit well in both the Display AND the Expansion forums - and since neither has been able to give me an answer (although the alternative you suggested isn't wholly a bad option) as to whether or not this is or will be possible, I'll keep the question alive in 2 places until it gets sorted out. If this is against forum policy or something let me know, otherwise...

Graphics/Video Card [REPLACEMENT / UPGRADE] on HP Pavilion Desktop - Help

I have the following:
HP Pavilion Elite m9152p Desktop
Upgraded to Windows 7 Professional 64-bit (upgraded 11-2009)
The video card seems to have gone out and I have tried the following:
Reinstalling Operating system
Uninstalled & Reinstalled & Rollback drivers
Prior to the above attempts, no changes had been made to software or hardware only leading to the same result: The video seems to be fine and then it freezes and crashes and ultimately has to have a hard-restart at which point, the computer loads the onboard video/graphics.
I need to purchase a replacement video/graphics card, but I am unsure what specs I need to be aware of or what my computer can handle as far as a replacement and maybe a possible upgrade (not necessary) - any help in this regard would be most appreciated.
Thanks!
This question was solved.
View Solution.

I think it is a good choice.
The reviews seem positive for the most part including that the fan appears to be quiet.
I don't know if your previous card had HDMI.
When you install your new video card, it may disable your onboard audio due to the HDMI audio chip on the video card.
If you do lose your onboard audio, after you install the video drivers, reboot the machine, go into the BIOS, find the onboard audio setting. It may be set to Auto or Disabled. Change the setting to Enabled. Save the setting where you made the change and again when you exit the BIOS.
Upon reboot you will have your onboard audio back.
Looking forward to hearing back from you.
Paul

Video Card - Repair or Replace?

I have a Dual 2.5 GHz PowerPC G5 with a Radeon X800 XT video card. The video card is making a very loud intermittent whining noise. I assume it is the fan on the video card making the noise. My question is whether to replace the video card or repair it.
I noticed on Ebay that this video card still holds it's value at $200 - $300 while the video card in my new Mac Pro (Radeon X1900 XT) only has a value of $60-$80. Why is the X800 XT still so expensive?
I also found on Ebay someone selling a brand new, authentic ATI fan (with heatsink) replacement for only $12. It looks exactly like the one on my current card. I'm just wondering if replacing the fan is an easy enough process that I could do it without messing it up and causing overheating issues or other problems. I have only once before worked with thermal paste and I wouldn't want to do it wrong. However, if it's pretty fool proof then I'll give it a go.
To sum it up my questions are 1) Why is the X800 XT still so expensive and 2) should I replace the fan or look for a new AGP card.
Thanks in advance.

Hi-
Why is the X800 XT still so expensive
Because there are no real equals in terms of overall performance for AGP G5's.
There are no new cards in production and the X800 was and is, at the top of the A list.
Even a close option like the Geforce 6800 Ultra also demands higher prices.
http://www.barefeats.com/radx800.html
should I replace the fan or look for a new AGP card.
I would replace the fan.
It's a shame to toss a card like that for a simple repair.
This article is for a CPU, but the basics are the same:
http://www.jcsenterprises.com/Japamacs_Page/Blog/9AE7FE0E-0CF2-4A7C-8003-489B282 582BC.html
Use Arctic cooling MX-2 or MX-3 to get the safest to use, most thermally conductive compound available.

I just got my replacement phone from Warranty. The phone was on for just 2 hours and it crashed. I was told that motorola knows about this "possible" issue. I got a new sim, hard reset, If it can be done I did it. They are now sending me the same phone ag

I just got my replacement phone from Warranty. The phone was on for just 2 hours and it crashed. I was told that motorola knows about this "possible" issue. I got a new sim, hard reset, If it can be done I did it. They are now sending me the same phone again. Number 3. I would hope this one doesn't crash but I rather have a different phone so I can enjoy using my account. The phone's most recent error was today. " Unfortunately, the process com.motorola.widget.circlewidget3d" has stopped. At least the error message works and it's polite. I told tech this and they could not answer my question or help me other then "let's do a hard reset" My warranty replacement is coming on Monday. Let's hope this one works. Anyone else havinbg the same problem. it says "such and such as stop working" on all sorts of stuff! Help! I want my iPhone Back!

I just did a google search on this issue. OMG, I got a ton of videos on this or similar issues. Each one says in some way to clear the cache, reset the data, etc. Why in the world would this continue to happen and they not do a fix that resloves this without having to lose or stop what your doing. This is a very long and constant issue it seems with Android phones as there must have been pages and pages of what I now call "Unfortunately" So I am going to pray that Verizon helps me out and gets me away from this issue and helps me go back to iPhone or try the Samsung.

Is it possible to replace all assets in a project?

Hi
I have just finished the first DVD of a series consisting of 26 menus (18 buttons each, except for the main menu which has 25 buttons), 75 playlists, 323 video files, 24 audio files, 33 timelines (up to 45 chapters each). In every case a video file corresponds to just one chapter. Total 3,4 Gb more or less.
I had a lot of problems (general error, out of memory, sorry an abnormal condition has occurred...) during the DVD build process, and I finally had to start from scratch and create new versions every few steps to get this thing to build. Took a long time as I had to save as, then build to see if it worked, then close the file, then reopen and start a new version, ended up with 27 versions.
I have to prepare the rest of the DVDs, which will have exactly the same structure, although some of the videos may be slightly different in length (just a few seconds difference).
Is it possible at all just to rename all the assets to avoid re authoring the whole thing, and then review only the timelines including the different lenghted videos?
Thanks a lot

Graciela Caro,
When faced with a similar Project (ended up being a set of 18 DVD-5's with the same structure), I built a test Project to work out the details and finally got everything as I wanted, then burned a DVD RW.
I took the "test" and built a "template" with all of my Bins/Folders, Menus (knowing that I'd change these, as each DVD would be similar, but unique) and Imported just the Assets that would be common, like the First Play and a lead-in to the Main Menu. This I Saved to a master folder. For each individual DVD, I opened that "template" Project and did a Save_As into the appropriate folder for that piece of the Project, i.e. Barry_DVDs_01. For each of these, I Imported the Assets unique to that phase of the overall Project. Then, it was just a matter of creating the individual Playlists, etc., and linking. I helped myself by doing a Flowchart in Illustrator. For each phase, I swapped out the Menus, and altered the Links to suit. This gave me the full schematic of each sub-Project. I used these for myself in the Linking process, and also used them for the client to sign off on. He knew exactly what was going to be on each DVD in the set, and how the navigation would work. In Illustrator, I kept things in their Layers, so it was easy to make changes for each sub-Project. Any changes after the Flowchart had been approved cost more $. The client knew this and could see exactly what was happening at every step.
Though it's some additional work, if you have the Project (your "test") finialized, and know that you'll be duplicating it many times, just with different Assets, I'd urge you to adopt something similar. It should not take long to re-create a blank Project with all of the common aspects in it. Use this as a "template," and do a Save_As of it, to begin each phase. It keeps the XML Links that have to be re-done to a minimum, 'cause you're starting with a semi-clean slate for each one.
As Jbowden points out, just replacing the Assets can lead to problems. I did not even want to go the Replace Assets command route, to keep the Project file from possibly getting corrupted by overwriting the Links, even using the correct, approved process.
Just make sure to place a copy of your "template" Project well away from the area that your working in on your I/O system. Make it Read Only, for safe-keeping, in case you forget to do the Save_As. I actually made two copies - one onto a DVD just for safety.
Good luck,
Hunt

Video card dead? Need to get a PC one - flash it if possible, need some hel

Computer is a 13 month old, out of warranty - go figure, Mac Pro.
Okay, last night finished work and fired up WoW and had several crashes, this morning I could not open WoW without getting a video crash right away, just massive screen artifacts and unable to really do anything.
I was able to copy files across the network and get some work stuff on my wife's iMac even when the screen was locked up.
I started backing up a few drives to a central drive, so I could wipe one clean and try a OS reinstal and see if that worked, was able to copy them even when I couldn't access the screen (Watched them populate via the network.)
I took the card out, popped the plastic cover off and cleaned the dust off - there really wasn't much, so I'm not sure what the issue is. I took a can of air and cleaned off the Ram, CPU heat sinks, etc.
Was able to boot in a few more times, usually locking up the screen in 4 or 5 minutes, however now booting into OS X, CD or Bootcamp goes straight to a lockup/you need to reboot screen, I've tried letting the card cool off to see if I could boot in real fast and get some pertinent work files (That worked on a PC w/a overheating card for me before, but I can't get past the lockup now.
I live in Vegas, so called a few apple stores who do not have any replacement cards, looking on ebay they are 2-3 hundred for a 8800GT, ug.
I was going to go to Fry's and pick up a EVGA 8800 GTS, seem to see a lot of how-to-flash posts, etc. claiming that works, and that's a great 'today-fast' around $100.00 solution (Money is VERY tight right now and things are getting worse incrementally w/the Mac dead.)
However - every tutuorial to flash the card gives me step by step how to do it via making a bootcamp partition, and having both cards installed, etc.
I don't seem to have the capability to do it from bootcamp as I can't get past the panic. My wife's got an iMac so no way there, the kids have a mini-hp, bleh.
My bud has a hackintosh I built as a gaming rig last year, I guess my question is, can anyone explain how to patch the card on a PC? Is it even possible or do I need to sell a kidney to get a Mac Pro specific card, flash the Fry's one and then try to recover some of the loss ebaying the Mac card?
Sorry if I'm rambling, really still not 100% sure it's the video card, but praying it is as that's the cheapest fix in these rigs.
Thanks in advance for any help anyone can offer!

See this link for a 4870 card, best instructs for flashing for a noob like me. (last lowest price was $150 for a 1GB vRAM 4870 from TigerDirect).
http://web.me.com/jacobcroft/4870Flash/4870Flash.html
However, not every 4870 card will work with the ROM currently floating around out there. BEWARE!
Link to recovering a bricked card:
http://forums.techpowerup.com/showthread.php?t=64328

My 27" imac won't boot in normal mode. The screen stays white. I have upgraded to Yosemite. However, the computer does boot in safe mode. Could this be a virus related issue or possibly a video card issue?

My 27" iMac will not boot in normal mode. The screen stays white. The computer will boot in safe mode. Could this be virus related or is it possibly an issue with my video card. Before this happened, my computer screen was flashing weird things and the computer would unexpectedly power down.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' sub(/ :/,"");{ print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.appex\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Whether it is possible to replace a video card in imac 21.5 not the base?, Whether it is possible to replace a video card in imac 21.5 not the base?

Similar Messages

Maybe you are looking for