Whether OPM Process Execution module supports Continous Manufacturing

HI all,
can any one tell me whether OPM process execution will support Continous Manufacturing ( like fertiliser, Oil & gas, petrochemicals) industries.
My doubt rise because in process execution we are using Production batches concept( in which material is allocated to the batch). so this is batch process.
then how to go with coninous process?
similarly, one more doubt is there.
im developing a new product in laboratory. am i able to produce or manufacture that product ( for my development purpose) for lab purpose. This industrially termed as Pilot plant trial?
pls help in resolving these issues?

Hi Karuna
1. Yes it can be implemented but in batch mode. You will have to break the continous process into batch and then enter the data. This is a kind of workaround but acceptable. I have implemented this in Agro pharma company and they are able to work with this.
2. Yes it can handle lab trails with experimental items and even costing. Please review the oracle site for a data sheet and visit the OPM Self-Study toolkit page on metalink for more
Regards
Girish

Similar Messages

OPM Process Execution and OPM Standard Costing for Poultry Business

I have a business requirement from the client at their Poultry Processing plant where the client feels that the OPM Execution steps are too cumbersome until closing the batches. The client wants to maintain minimum number of batches in Production: one for Primary, one for Secondary and one for Further Processing, rather than having multiple batches based on different formulas. There are 3 main types of processing which can be briefly described as follows:
A.) Primary Processing:
Live Birds (Ingredient) become Whole Dressed Chicken with Neck, without Neck, Liver, Heart, etc... (40 Finished Products)
e.g. Live Birds (Broiler) -> Whole Dressed Chicken with/without neck, Whole Dressed Chicken with/without neck, etc.
B.) Secondary Processing:
Only one type of Whole Dressed Chicken (from Primary Processing) become Chicken Cuts (80 Finished Products).
e.g.[Scenario B1] Whole Dressed Chicken (Broiler) -> Drumsticks, Thighs, Wings, Breasts, Backbone, etc.
[Scenario B2] Breasts -> Filets and Deboned Breasts (2 FGs)
[Scenario B3] Thighs -> Thighs in Plain Bag
Please note that the Whole Dressed Chicken is also sold as a Finished Good as well as an Ingredient for the Secondary Processing.
C.) Further Processing:
Chicken Cuts become 40 Finished Products
e.g Filets -> Chicken Nuggets, Chicken Fries, etc...
The client is using Standard Costing method for its OPM Financials and all the finished products (160 Products in all) are having different production cost. Please note that 1 kg of Chicken Wings is not equal to 1 Kg of Chicken Thighs. Different body parts have different costs. In order to alleviate the maintenance of multiple batches per day on the production floor, the client wishes to have minimum batches. We therefore would wish if you can confirm the below approach to be correct?
a.) OPM Process Execution:
==========================
EITHER should I (Option 1):
a.) Create ONLY 3 Formulas for Primary, Secondary and Further Processing . The 3 Formulas will have all the processing line Finished Products grouped together (as per the scenarios explained above). Formula for Primary and Secondary Processing can also combined together, reducing it to only 2 batches to maintain per day.
b.) Can set any Quantity Values for the Ingredient, Product and By-Product in the Formula details with ANY Cost Allocation (amounting to a total of '1') in the Products section
c.) Set the Validity Rules as 'PRODUCTION' for the 3 Recipes
d.) Complete the steps defined in the 'OPM Cost Management' (as described below)
e.) Create the 2 or 3 batches and record the appropriate quantities at the end of the day before closing the batches
OR should I (Option 2):
a.) Create MULTIPLE Formulas (above 100 formulas) for Primary, Secondary and Further Processing based on the different products processed.
b.) Can set any Quantity Values for the Ingredient, Product and By-Product in the Formula details with ANY Cost Allocation (amounting to a total of '1') in the Products section
c.) Set the Validity Rules as 'PRODUCTION' for the 3 Recipes
d.) Complete the steps defined in the 'OPM Cost Management' (as described below)
e.) Create the MULTIPLE batches and record the appropriate quantities at the end of the day before closing the batches.
b.) OPM Cost Management:
========================
Whether (Option 1 or Option 2) selected, the below needs to be set for OPM Costing:
a.) Define multiple formulas (above 100), as in Option 2.
b.) Set the Quantity value to be '1' for the Ingredient, Product and By-Product in the Formula details with the appropriate Cost Allocation in the Products section
c.) Set the Validity Rules as 'COSTING' and 'PRODUCTION' for each Recipe
d.) Run Cost Rollup at least once so that the products can have an item cost per unit
As per me, for the purpose of Costing, it would be imperative to have multiple batches (created one time only) with appropriate Cost Allocation in the Formulas and the ‘Recipe Use’ in the Validity Rules should be set as ‘COSTING’. Then, setting Profile Option 'GMF: Use Only Costing Validity Rules for Cost Rollup' to 'Yes'. In this way, we are sure that the different products in the formula with correct Cost Allocation will have their Item Cost calculated after performing the Cost Rollup. AND, for the purpose of operations, we can only one combined formula of Live Birds (as Ingredients) to yield -> All FGs for Primary and Secondary Processing with Cuts. But, this time, the ‘Recipe Use’ in the Validity Rules of the Recipe should be set as ‘PRODUCTION’.
I want to confirm which approach (Option 1 or Option 2) is more appropriate in terms of Operations and confirm that the above proposed steps are correct with no circular reference (as certain finished products are also used as ingredients for another product in the Secondary Processing)?
Thanks and regards
Raveesh Nobeen
[email protected]
Edited by: user12189219 on Jan 20, 2010 3:48 PM

Hi Raveesh
I am implementing OPM R12 in Poultry Processing business, I think option 1 (Create 3 formulas/recipes/batches) is more appropriate. In my case we are using actual costing (Moving Average) as a costing method.
I have set the profile option GMF: Cost Allocation Factor Calculation to be "Dynamic" to calculate the batch cost allocations as a ratio of actual quantity of each product produced to the total production batch output quantity and I have used OPM Financial Cost Allocation process to allocate GL expenses on different products based on Fixed percentage % according to product "value" where Filets has a return more than wings.
Can you please share your knowledge in this business area and confirm to what extend my approach is correct ??
Thank you and best regards
Mamdouh Ragab

OPM Process Execution & Order Management

Hi there,
Can anybody tell me how can I release sales order for a specific OPM batch (Make-To-Order Approach). In other words, How can I assign the batch number in the sales order transaction in order to make a relationship between batch and sales order ??
Regards

dear frnd
While set up in MPS where in Schedule form select Make to Order as " Include Sales" Order then u see, once u perform MRP run u may get sales orer number, provided if u include you sales order as demand.
Navigation: OPM all/Process Planning/MPS/Set up/Schedule ( For declareing you Make to order as Include SO)
Let me know on this.
Hope ur in 11i
Regards
Raj
Mahindra Satyam

OPM process execution process parameters takes too long time to complete

PROCESS_PARAMETERS are inserted every 15 min. using gme_api_pub packages. some times it takes too long time to complete the batch ,ie completion of request. it takes about 5-6 hrs long time ,in other time s it takes only 15-20 mins.This happens at regular interval...if anybody can guide me I will be thankful to him/her..
thanks in advance.
regds,
Shailesh

Generally the slowest part of the process is in the extraction itself...
Check in your source system and see how long the processes are taking, if there are delays, locks or dumps in the database... If your source is R/3 or ECC transactions like SM37, SM21, ST22 can help monitor this activity...
Consider running less processes in parallel if you have too many and see some delays in jobs... Also indexing some of the tables in the source system to expedite the extraction, make sure there are no heavy processes or interfaces running in the source system at the same time you're trying to load... Check with your Basis guys for activity peaks and plan accordingly...
In BW also check in your SM21 for database errors or delays...
Just some ideas...

OPM Process Execution

Hi
Created a formula in OPM Prod Dev. Auto creation of recipe is enabled. Created the Batch for that recipe. All the quantities (ingredients and products) are thribled in the batch.
Please tell me the cause.
Thanks.

Hi Jai
Thanks for your reply.
while creating the document I checked both the formula qty and batch qty. they are same. then you click on ok button in create document opens the inventory shortages window, there the quantities are increasing. then we click on proceed to get the batch number.
Regards
Prem.

Oracle Process Manufacturing Process Execution Cycle

Hi I am new to OPM and looking for an overview of how OPM works.
I have searched but could not find any specific document.
If anyone is having or knows the process , Please share it.
Thank you in advance..

Hi;
Please see:
Information Center: Oracle Process Manufacturing [ID 1393312.2]
http://docs.oracle.com/cd/E18727_01/doc.121/e13652/T321962T321965.htm
http://docs.oracle.com/cd/A99488_01/acrobat/115gmepeapiug.pdf
http://docs.oracle.com/cd/A85683_01/acrobat/gmetrm.pdf
http://oracleappscommunity.com/oracle/blog/955/oracle-process-manufacturing-process-execution-tables/
Also see:
For r12.1.1:
http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
For r12:
http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
For r11:
http://download.oracle.com/docs/cd/A60725_05/r11_doc.htm
Regard
Helios

Use web service to invoke a new process execution

Hello,
I'm using BPM 10g3, and i'm trying to invoke a fully automated process via a web service
I've setup my web service http://<host>:<port>/albpmServices/<engine name>/ws/<process name>ServiceListener?wsdl
I've accessed it from a C# application i wrote and visual studio did identify my functions and such.
I can successfully start a new session (startSession(string password ,string username) and i get a sessionID back) with the web process.
but when im trying to invoke my own function (which is defined in the Process web service as a Process Execution on my beginIn parameters) I get a response with a FaultException with no visible error code.
In the BPM log I can see the folloowing lines:
1) Invoking service with id:<Process Name>ServiceListener
2) Executing item: IMMEDIATE Inst [-1, -1,-1] Act [No activity] Proc [No Process] Due 1318860646000000]
3) TransactionAction: Rollback!
while the TransactionAction: Rollback! means that something bad happened, i cant see the reason.
any idea's?

OK i've got it working.
I did all the things you suggested before but when you said i need to see that the right activity is being started i understood what's wrong
The chosen activity must be in a lane with the same role as the user login in to the session.
So i added a role on Begin and created a participent for that role, logged in with it and now it works =)
Edit: I'm the same guy that opened the threqad, just needed to make a new user for enterprise support (didn't get to use that though)
Edited by: 891957 on 23:59 17/10/2011

Function modules supported by seal system used to print drawing documents

Hi,
As per my current requirement, while create purchase order (ME21N), the drawing document (which are linked with materials of the PO) should print along with the PO form (smartform). The drawing are stored in the Auto CAD system. Seal software has already installed to print drawing documents.
But I would like to know the function modules supported by seal system used to print drawing documents.
Thank you.
Tulasi

Tulasi,
May be you can approach it this way
create a ztable with fields matnr and graphic object(check STXBITMAPS table for the attributes of this field) and upload the drawings against every material.Now you will have a table containing the matnr and the corresponding drawing in the table which can be used for further processing.
Hope any of the SDN experts here will suggest a better solution.
Kiran.

Whether Oracle BI Apps does support mySAP(ERP2005)?

HI, all
Whether Oracle BI Apps does support mySAP(ERP2005)?
Has it pre-build data model for mySAP?
thanks a lot~~!

Here are the supported Analytic Applcations and their counterpart SAP R3 Modules: (sorry it is kind of messy)
Oracle BI Applications for SAP R/3 Applications
* Support for version 4.6c is with the Oracle BI Applications version 7.8.4
Oracle BI Application          SAP R/3 module
Order Management Analytics      Sales & Distribution (SD)
               Financial Accounting (FI) (for Revenue)
Order Fulfillment Analytics Option Materials Management (MM) (for Inventory)
               Financial Accounting (FI) (for Revenue)
Inventory Analytics          Materials Management (MM)
Procurement and Spend Analytics Materials Management (MM)
               Financial Accounting (FI)
General Ledger & Profitability Analytics     Financial Accounting (FI)
Payables Analytics          Financial Accounting (FI)
Receivables Analytics          Financial Accounting (FI)

Does LV 7.0 PDA module support Microsoft Windows Mobile 2003 software for PocketPC?

I am evaluating the possible use of PDA
that runs Microsoft Windows Mobile 2003 software
for PocketPC and would like to know if the
LabVIEW 7.0 PDA module supports this software.
I am planning to scan barcodes with this PDA
and transmit this data over a WLAN to database.
Thanks!

Depending on the Pocket PC PDA type it is practical to add a barcode reader attachment and then use this as keyboard input into the PDA. You can look at a Grabba barcode Reader attachment (www.grabba.com)
I work for Grabba in R&D and we are looking at demand in this area (which is why I was looking at the forum to try and determine whether a need exists).
If we can help you let us know. I would be interested in knowing where you think this will help you. We have our own ideas but input from the field is most welcome.
cheers

To check whether a process flow is valid or not

Hi,
I want to check whether a OWB process flow is valid or not inside a PL/SQL block. Can anyone let me know about any repository table or view where I can check the process flow status.
Regards,
Poulose

Use display schedule job option from the context menu of the start variant of the process chain.
When u chick this.. u will get the available job on this start process.. There u can see whether the process chain in schedule mode or not?
If u can see multiple schedule then u can delete the older ones which are not needed and then u can maintain only one schedule job.
If u click twice.. then there are chances that u might end up with the 2 schedule job with the same time frame.. .. so check the same with the steps mentioned..... if u find two jobs then u need to delete one.. if not there might be chance that ur PC might get trigger twice.. and one trigger will gets failed. and the other one will gets executed..
Thanks
I hope this is clear to u..
Assign points if this helps

Whether Oracle 8.1.6 Supports Windows 2003 Server/Windows 2000 Adv. Server

Dear All,
Whether Oracle 8.1.6 Supports Windows 2003 Server/Windows 2000 Adv. Server.
I tried it in windows 2003 server but i couldn't. Atlease tell me wheather it support windows 2000 adv. server. This is my first dba job.
Under Doc ID: 66397.1 saying Oracle 8.1.6 Not Support Windows NT Server 4.0 Terminal Server Edition.
Under Doc ID: 77627.1 saying Oracle 8.1.6 Supports Windows 2000 Support.
Please help me out urgently.

Since you have access to Metalink, you could be looking at the Certify tab to find this information. But, the answer is that 8.1.6 is no longer supported by Oracle. However, you should be able to install it on Win 2000 advanced server. You just can't get any support for it.
The earliest version of db supported on Win 2003 was either 9.0 or 9.2, but 9.0 is desupported now as well.

Post Processing Steps after Support Package Stack Application

I'm curious if anyone has any guidelines for post processing steps (or pre-processing) when applying Support Package Stacks to their Development Infrastructure (Developmend Workplace and the Central NWDI Server). We have just upgraded a couple of developers local engines and developer studio to SP stack 19 from SP stack 14 and are experiencing some problems. We also applied the J2EE stack and appropriate SCA files to the NWDI server.
After the support packs it looks like our DTR files are gone (when reimporting configuration via Developer Studio the SC's are there but there are no DC's inside of them). Additionally, it looks like we have to manually reimport the newest versions of SAP_BUILDT, SAP_JTECHS, and SAP-JEE. Another thing is that old Local Web Dynpro DC's are now complaining about class path problems and different versions of files. We followed the documentation for applying SP19 exactly as the documentation says for a Java Development Usage type. Is there a checklist or something that anyone has for steps to perform after the application of the support packs?

I think I'm missing something. Now I see the code and DC's inside the DTR. However, when I try to import into NWDS no DC's come in (the software components exist, but no DC's in them). Additionally, the CBS web ui reports that my software components do not contain any DC's even though I see them in the DTR. What things can I look at to determine what I'm missing here?
Thought I'd add some more info..after applying the support packs, we imported the new SAPBUILD, SAP_JTECH, and SAP_jee SCA'S into our track as we required some functionality from the newer build SCA. We also reimported our old archives back into the system by manually checking them in assuming this would fix the problem with us not seeing the source in the NWDS or the DTR. After the import, the CBS no longer sees our custom DC's, but the DTR does (both in active and inactive ws). When importing the dev configuration into the NWDS our custom DC's no longer appear, but SAP's standard SCA's do.
Message was edited by:
Eric Vota

BPE_adapter The process does not support the given synchronous interface

We are using PI 7.0 Sp 14 .
Old dev box needed to be upgrade with 64 bit hardware. We did a fresh installation and done all the technical configuraiton. Imported SLD , IR,ID , Runtime value mapping . All scenario working fine after migration except one particular scenari which involves SOAP Web service .
Our scenario is Extern system send SOAP call to PI - BPM_SYNC_ASYnc_process --> BPM Proxy_send
this BPM proxy_send to ECC R/eceiver at R/3
We are getting the following error after migraiton. Please help
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
Error! Hyperlink reference not valid. <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

Is there any other Configuration to be done at the Abap side part from BPE_XI_customising (Automatic customising) done as part of the post installation steps .
Wondering any other configuration needs to be done at the ABAP side (as BPE is running on the ABAp stack) to resolve this.
Thanks

Process execution engine execution error. from the latest HF in BPM Ent.

Hi All,
After applying the latest hotfix, I'm now getting this error when trying to launch any of the application.
My setup is AquaLogic BPM Enterprise 6.0.4 for Weblogic.
I've tried redeploying all the deployments within Weblogic and also the Admin Center. Nothing has worked.
Any idea what's causing this?
Process execution engine execution error.
Caused by: fuego.io.ObjectSerialization.customWriteObject(Ljava/lang/Object;Ljava/io/ObjectOutputStream;Ljava/lang/Class;)V
fuego.papi.impl.EngineExecutionException: Process execution engine execution error.
at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:158)
at fuego.papi.impl.j2ee.EJBProcessControlHandler.invoke(EJBProcessControlHandler.java:70)
at $Proxy154.runGlobalActivity(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
at fuego.lang.JavaObject.invoke(JavaObject.java:227)
at fuego.papi.impl.j2ee.EJBExecution.next(EJBExecution.java:189)
at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:177)
at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
at fuego.web.papi.TaskExecutor.runApplicationTask(TaskExecutor.java:349)
at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:95)
at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:228)
at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:219)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at fuego.web.filter.SingleThreadPerSessionFilter.doFilter(SingleThreadPerSessionFilter.java:64)
at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3368)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2117)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2023)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: java.lang.NoSuchMethodError: fuego.io.ObjectSerialization.customWriteObject(Ljava/lang/Object;Ljava/io/ObjectOutputStream;Ljava/lang/Class;)V
at BT_QW.MyProcess.Default_1_0.Instance.writeObject(Instance.xcdl)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:890)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1333)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:291)
at fuego.server.ProcInst.getComponentData(ProcInst.java:780)
at fuego.server.ProcInst.mustStoreComponent(ProcInst.java:2793)
at fuego.server.persistence.jdbc.JdbcProcessInstancePersMgr.createInstance(JdbcProcessInstancePersMgr.java:1018)
at fuego.server.persistence.Persistence.createProcessInstance(Persistence.java:669)
at fuego.server.execution.EngineExecutionContext.persistInstances(EngineExecutionContext.java:1810)
at fuego.server.execution.EngineExecutionContext.persist(EngineExecutionContext.java:1109)
at fuego.transaction.TransactionAction.beforeCompletion(TransactionAction.java:132)
at fuego.connector.ConnectorTransaction.beforeCompletion(ConnectorTransaction.java:685)
at fuego.connector.ConnectorTransaction.commit(ConnectorTransaction.java:368)
at fuego.transaction.TransactionAction.commit(TransactionAction.java:302)
at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:481)
at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
at fuego.server.AbstractProcessBean.runGlobalActivity(AbstractProcessBean.java:2708)
at fuego.ejbengine.EJBProcessControlAdapter.runGlobalActivity(EJBProcessControlAdapter.java:1036)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl.runGlobalActivity(EJBProcessControl_1zamnl_EOImpl.java:3450)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:335)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl_1000_WLStub.runGlobalActivity(Unknown Source)
at fuego.papi.impl.j2ee.EJBProcessControlInterfaceWrapper.runGlobalActivity(EJBProcessControlInterfaceWrapper.java:2033)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:72)
at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:116)
... 39 more

I ended up rebuilding my ALBPMDir and ALBPMEngine schemas and WebLogic server domains from scratch. When executing the process that was giving me a headache, all of a sudden I got the following error:
fuego.server.exception.MaxInstanceSizeRuntimeException: Max instance size exceeded.
Current size is 16538, whereas the maximum size is 16384. This occurs with instance '
Anyway, the sizes were not terribly far off, but I doubled the process instance size from 16k to 32k and the error went away.
Something to try on your end, perhaps.
Chris

Whether OPM Process Execution module supports Continous Manufacturing

Similar Messages

Maybe you are looking for