Whether solaris 8 os support dual cpu machine?

Hello :
Whether solaris 8 OS support dual-processor machine , When i install solaris 8 in a dual
process machine , I always can't install solaris OS .
Thanks !
Future

For Intel Architecture it is important that the system is in the HCL
(Hardware Compatibility List)
The list is available at:
http://soldc.sun.com/support/drivers/hcl/index.html#S8
SUN cannot guarantee that Solaris will work on every Intel Dual processor system.Once the machine is tested the machine is available in the HCL list.
HTH
-Dhruva

Similar Messages

Sar command for dual cpu's

Hello to everyone!
i am using solaris 8 and the "sar -u" command to get the Cpu % Utilization..
Is "sar" command reliable for dual cpu or gives reliable values if you have one cpu only.
I mean if the first cpu has 50% utilization then the "sar" command gives % idle time 50 % or 25% (1/4) considering we have 2 cpu's
thanx in advance for your time and your help

You've got it all wrong- this conversation is not about threads. SAR is reporting on the cpu-utilization.
Lets take an example:
Lets say you got five running programs. One of these programs occupies about 100% of the processor while the others are idle. Then SAR will report 0% idle - becouse the processor is NOT idle. SAR does not care if there are one or a thousand idle processes.
If this was done on a dual-cpu machine where the active program was to occupy 100% of one processor and the other four programs still idling. Then sar would report 50% since one processor is fully used while the other processor is idle.
I hope this has cleared it up a bit for you.
Regards,
Jon, developer, Sweden

Quicktime on dual CPU-PCs

Hello.
I have got big trouble getting quicktime for windows running on my PC. Everytime I try to export or sometimes even import a quicktime video, the applications that I use crashes, because of the quicktime component. I never had such problem on my mac computers (older mac pro, macbook pro) but since apple is not able to build powerfull maschines anymore, an the new mac pro is nothing but small, I prefer the much faster configuration I can get with PCs. So quicktime works fine on 2 of my PCs. Only on my biggest dual CPU Workstation it crashes. I searched the internet and found out that quite a view Dual-CPU-PC-Users have the same Problem.
Does anybody know how to fix this? I'm really desperat since i need the quicktime capability on this particulary Dual-CPU-Machine for work. Please Help me.
Thanks!!

>Is it possible to ask LabVIEW to execute all subVI in a sigle thread
>on a dual CPU machine. Our SubVI are calling an API. And this API
>look for the TheadID to recognise which application is doing the call.
>We would like to get advantage of multiprocessing. But having all the
>SubVI call with the same ThreadID?
VI Guy wrote:
> Probably not.
>
> Each executionriority system in LabVIEW gets two threads to service
> it in multithreaded mode.
>
> So even though you can specify the exact same execution system and
> priority for each sub vi, you can not be guarantied that you will get
> the same thread each time.
>
> Good luck.
You should be able to do this. If you go to VI.lib/utility/sysinfo.llb,
you can open a vi called threadconfig.vi
. This will allow you to edit
the number of threads per execution system and priority. So to use VI
Guy's idea, you could set one thread per execution system, then set your
different VI's into different execution systems. Also, you should take
a look at the recent issues of LTR. (www.ltrpub.com) There was an
article there about assigning a specific VI to a specific processor on
multi-processor machines.
Good luck,
Dave
David Thomson 303-499-1973 (voice and fax)
Original Code Consulting [email protected]
www.originalcode.com
National Instruments Alliance Program Member
Research Scientist 303-497-3470 (voice)
NOAA Aeronomy Laboratory 303-497-5373 (fax)
Boulder, Colorado [email protected]
There are 10 kinds of people: those who understand binary,
and those who don't.

Dual CPU G4 panics and applications quit

Hi,
I've had a single CPU G4 (digital-audio) machine running OS 10.4.x for quite some time. It's been remarkably stable.
Now, I've acquired a 533 mhz dual cpu machine, also a digital-audio model. Applications spontaneously quite much more often, more than once per day, mostly web browsers, and the kernel locks up several times per week.
I've run MemTest and repaired permissions and run the disk utility and run DiskWarrior, all to no avail. I also did a archive and fresh reinstall of OS 10.4.2, then a batch update with software update. Didn't help.
I'm wondering if certain dual cpu machines are just more prone to crash than their single cpu counterparts.
Any suggestions about how to make this machine more stable? It's not on a network, except for a conventional PPoE DSL connection.
I know I could try zapping the pram and resetting the PMU. Anything else?
It gets a lot of heavy iTunes use and also Rhapsody use. Is that a clue?
Thanks in advance,
Tim

Hi
dual CPU machines should be just as stable.
As already mentioned the first thing I'd suspect is the RAM. If you still have your old machine and could swap the RAM over (if you haven't already done so) that should prove it one way or the other.
Also dual CPUs generate more heat, especially under heavy load, which can result in kernel panics. I assume the computer has plenty of ventilation and isn't boxed in, the vents are clear of dust and the fans are working etc...

Sluggish Dual CPU

I bought a refurb Dual CPU because I though it would be a blazing machine, 2x 2.4 6 core Xeon, 32GB, and it seems so sluggish. I though it would be faster than my old i7 iMac, yet the little things, like switching from Date Received to From in the main mail box window takes 3 seconds, which feels like an eternity. No errors when i run permissions, very few programs running.
Working in Mail today getting lots of beach balls spinning.
Is there going to always be a delay in a dual cpu machine as it talks back and forth, and am I better off getting a new thin iMac if I want speed? Am I asking too much for faster
Thanks for any help

Hatter, my head is getting ready to explode from all the info, I would like to ask a few more clarification questions below in CAPS.
The hatter wrote:
TimeMachine.
It may change the structure so when you go to Lion and were using SL, time for new drive and put that on the shelf.
I AM USING THE SAME USER NAME, AND ITS WORKING JUST FINE IN 10.8.3 AS IT WAS IN SL, SO FOR NOW, ITS NOT A TOP PRIORITY.
Clone the system so you have 10.6.8 / 10.7.4 (until you know your 7.5 is safe fine and stable) / etc
Make a new one before you make updates, changes, install though I doub there will ever by a future update there may be hopefully security updates.
I AM ON 10.8.3, THOUGH I WILL CLONE THE NEW INSTALL ON THE SSD BEFORE I DO ANYTHING ELSE.
A 2GB drive - like back on my PowerMac PCI model 7600 era? Oh! you want 2TB WD Black, right?
DOOH, SILLY ME, 2GB. 2TB IS CORRECT. I CAN NEVER FORGET BOOTING UP ON 800K FLOPPIES AND HAVING TO SWITCH 2 BACK AND FORTH FOR 30 MINUTES... I DON'T MISS THOSE DAYS...
LEAVE your home library on the SSD. It is small. under 5GB. And you want it on fast media.
HOW DO YOU MEAN MY "HOME"? RIGHT NOW, ON MY MAIN HD, I HAVE APPLICATIONS, LIBRARY, SYSTEM, AND ALL THE USERS. ARE YOU TALKING ABOUT THE LIBRARY ON THE MAIN HD, OR IN MY USER FOLDER?
MY LIBRARY ON MY USER ACCOUNT, THE ONLY ONE I CREATED, IS 43GB AND THE ONE ON THE MAIN HD IS >5GB.
MY MAIN HD HAS 239GB INSTALLED DATA, AND MY USERS FOLDER IS 191GB. I JUST BOUGHT A 256 SAMSUNG 840 PRO SERIES AND THERE WILL BE LESS THAN 10% FREE, SO I DON'T THINK THAT'S A GOOD IDEA.
MY APPLICATIONS FOLDER IS 15GB ON THE MAIN HD
IN MY USER FOLDER, I HAVE 5GB OF MUSIC AND 3GB OF PHOTOS THAT I THOUGH WERE ON MY 3TB MEDIA DRIVE. CAN I JUST DRAG THEM OVER TO THAT MEDIA DRIVE AND DELETE OUT OF THE USER FOLDER, OR WILL I HAVE PROBLEMS.
DOCUMENTS ARE 2GB, FOLDER WITH ALL MY WEB STUFF IS 16GB. HOW MUCH OF THIS SHOULD NOT BE IN MY USER HOME FOLDER, AND IF SO, WHERE SHOULD I PUT IT?
SO, AFTER I INSTALL THE SSD, INSTALL THE OS, I CAN'T DRAG OVER MY HOME FOLDER FROM MY USER FOLDER DUE TO IT BEING 190GB. I GUESS I CAN STORE OLDER THINGS ON A BACK UP DRIVE AND GET THAT DOWN BY QUITE A BIT. IS THAT A GOOD IDEA?
Go ahead though and copy or clone it to another drive so you have a copy there.
MY HOME LIBRARY IN MAIN HD OR USER FOLDER?
I am not recommending you "move" the system path to the home folder. No need.
Yes make Library visible and copy that stuff to another location on another drive.
I strongly recommend using Disk Utilty and create a sparse disk image for your home library and/or Mail
THE 43GB LIBRARY IN MY USER FOLDER IS VISIBLE, SO I DON'T NEED IT IN MYUSERS FOLDER? COPY TO MY NEW 2TB DATA/APP DRIVE, OR JUST ANOTHER DRIVE FOR B/U? I AM CONFUSED HERE
Then you could burn to DVD as well as make copy and keep it backed up.
OF WHAT, THE 5GB MAIN HD LIBRARY OR THE BIGGER USERS LIBRARY?
WHERE SHOULD I BE PUTTING FONTS & SUCH, IN MAIN HD LIBRARY OR USERS FOLDER LIBRARY?
And have "Mail 2013" and a new one or update one every month?
YOU LOST ME WITH THIS. I AM NOT SURE WHAT YOU ARE REFERRING TO. B/U THE MAIL FOLDER? WHAT ABOUT THE DOWNLOADS & THE PREFS IN MY USER LIBRARY?
If you are going to use mirror RAID, buy SoftRAID 4 - eventually.
OK
I would rather have you swap backup sets. Use one drive for TIME this week, use another on weekend even.
HOW DO I DO THIS? MANUALLY CLONE OR DRAG & DROP? CAN YOU EXPLAIN?
Add to that daily or whatver clone - as needed - of the system and data.
DAILY CLONE? I COULD NEVER DO THAT; JUST DONT HAVE THE TIME, THAT'S WHY I USE TIME MACHINE. HOW CAN I AUTOMATE THAT?
Working on a project the way I am right now I realized I did a lot of work and needed to clone my data immediately.
WHY ISN'T TIME M/C GOOD ENOUGH FOR THAT?
Finding where and recoverying your mail from the past is another matter.
LETS FORGET THAT FOR NOW.
Put me in the middle, not a newbie, but not a techno geek of the 10th degree. Your help & patience with me is very appreciated, looking forward to your answers so i can get started.
Chris

Can my Macbook Pro support dual boot and Secret World

Hi
My MacBook Pro has the following specs
Processor 2.8 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Software Mac OS X Lion 10.7.4 (11E53)
I was wondering if it can first of all, support dual boot, because I would like to play a Windows based MMORPG. And I was wondering if there are risks involved? I'm also worried because I like Mac's secure delete trash function and won't having a Windows platform affect that?
Furthermore, can it support playing Secret World with such specs?
Secret World is an MMORPG I'm not sure what the minimum requirements are.. It doesn't say, but anyone has a guess?
-EDIT
OS:      Windows XP (SP 1)/Vista (SP 1)/Windows 7 (SP 1)
PROCESSOR:      2.6 GHZ Intel Core 2 Duo or equivalent AMD CPU
MEMORY: At least 2GB RAM for Windows XP / 3GB RAM for Windows Vista and Windows 7 *
VIDEO CARD:     nVidia 8800 series 512 VRAM or better/Radeon HD3850 512MB or better
DIRECTX: DirectX 9.0c Compatible

If you have an MBP with a Core 2 Duo processor and a clock speed of 2.16 or 2.33 GHz, your max is 3 GB. If you have a 2.2, 2.4, 2.5 or 2.6 GHz clock speed your max is 4 GB.
Check Apple menu > About this Mac for processor type and speed.
I can tell you what you should see - C2D at 2.16 or 2.33 GHz. Those machines have a 3 GB max stated by Apple, but will actually use ~3.2 GB if you have 2 x 2 GB installed, and you get the (marginal) benefit of having a matched pair. In that case, it's also 'normal' for About this Mac to show 4 GB even though the memory controller can only access a little over 3 GB.

Can the imac core duo support dual band wifi?

I have a core duo 2GHz iMac intel. Can the imac core duo support dual band wifi?

Do you mean will your iMac work with a router that supports dual band? If this is correct, the answer is yes. If that isn't what you intended please look at the system specification for your machine. You can find that by clicking Support - Tech Specs

Dual CPU's! Dual CPU's??

Lo all,
I have dual CPU system, 2x Intel Pentium III, 866 Mhz.
How do I know Arch uses both CPU's, and does the stock kernel support SMP?

Yes, the default kernel supports SMP.
You can verify that it's using both processors by,
cat /proc/cpuinfo

Intermittent boot up problemsI have a G5 Dual 2GHz machine

I have a G5 Dual 2GHz machine with 2Gb RAM. I have had an intermittent bootup problem every since installing Tiger.
The machine appears to start as normal, gets as far as the spinning cog wheel then just shuts itself down as if there was a power cut.
This happens every time I install an update and when I tryed to start up in verbose mode to try and work out why I can't see the message quick enough before it shuts down.
It will however boot up in safe mode and sometimes this fixes it if I then start up normally.
Other times I have to just leave it for about a half to one hour and it eventually boots up.
This problem is now happening more frequently not just after updates and can take several attempts to get it to boot properly.
If I run fsck in single user mode it reports that the file system is ok. If I run hard disk checks this also says everything is ok. I haven't as yet reinstalled a clean system.
Does anybody have any ideas? Is this hardware or software? Any suggestions appreciated.

Hi there,
Thanks for all your tips which I have tryed but it doesn't seem to make much difference. In fact the machine wil l now on ly boot in safeboot mode.
The Apple hardware test reported no faults. Disk utility verified that the hard disk was ok and I repaired permissions. I ran Tiger cacche leaner and said yes to all options. I also followed Al's suggestions and used font doctor to check out the fonts. It found three corrupted which I removed but this also did not make any difference.
I looked in the system log and found the following :
I don't know if they means anything to anybody:
system.log:
Description: System events log
Size: 30.41 KB
Last Modified: 31/08/2006 15:26
Location: /var/log/system.log
Recent Contents: ...
Aug 31 15:25:44 localhost mDNSResponder-107 (Mar 20 2005 20: 31:47)[69]: starting
Aug 31 15:25:45 localhost kernel[0]: MacRISC4CPU::start - found 'cy28508'
Aug 31 15:25:44 localhost diskarbitrationd[54]: disk1s3 hfs 074EB148-4C56-3B7A-AEC6-A46DD1035113 Excelsior /
Aug 31 15:25:45 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Aug 31 15:25:45 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Aug 31 15:25:45 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Aug 31 15:25:45 localhost kernel[0]: DART enabled
Aug 31 15:25:45 localhost kernel[0]: MacRISC4CPU: publishing BootCPU
Aug 31 15:25:45 localhost kernel[0]: FireWire (OHCI) Apple ID 42 built-in now active, GUID 000a95ff feba07a2; max speed s800.
Aug 31 15:25:45 localhost kernel[0]: ApplePMU::PMU FORCED SHUTDOWN, CAUSE = -122
Aug 31 15:25:45 localhost kernel[0]: Extension "com.apple.driver.PioneerSuperDrive" has no kernel dependency.
Aug 31 15:25:45 localhost kernel[0]: Security auditing service present
Aug 31 15:25:45 localhost kernel[0]: BSM auditing present
Aug 31 15:25:45 localhost kernel[0]: disabled
Aug 31 15:25:45 localhost kernel[0]: rooting via boot-uuid from /chosen: 074EB148-4C56-3B7A-AEC6-A46DD1035113
Aug 31 15:25:45 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Aug 31 15:25:45 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@7/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/ST3160023AS Media/IOApplePartitionScheme/AppleHFS_Untitled2@3
Aug 31 15:25:45 localhost kernel[0]: BSD root: disk1s3, major 14, minor 3
Aug 31 15:25:45 localhost kernel[0]: jnl: replay_journal: from: 4745728 to: 5205504 (joffset 0x1af000)
Aug 31 15:25:45 localhost kernel[0]: Jettisoning kernel linker.
Aug 31 15:25:45 localhost kernel[0]: Resetting IOCatalogue.
Aug 31 15:25:45 localhost kernel[0]: Matching service count = 0
Aug 31 15:25:45 localhost kernel[0]: IOPlatformControl::registerDriver Control Driver AppleSlewClock did not supply target-value, using default
Aug 31 15:25:45 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Aug 31 15:25:45 localhost kernel[0]: UniNEnet: Ethernet address 00:0a:95:ba:07:a2
Aug 31 15:25:46 localhost launchd: Server 2b13 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[60]: exited abnormally: Hangup
Aug 31 15:25:46 localhost lookupd[92]: lookupd (version 365) starting - Thu Aug 31 15:25:46 2006
Aug 31 15:25:46 localhost mDNSResponder: Couldn't read user-specified Computer Name; using default “Macintosh-000A95BA07A2” instead
Aug 31 15:25:46 localhost xinetd[73]: xinetd Version 2.3.11 started with libwrap options compiled in.
Aug 31 15:25:46 localhost xinetd[73]: Started working: 0 available services
Aug 31 15:25:46 localhost diskarbitrationd[54]: disk1s5 hfs 734BBC31-E33A-3B7A-864E-41F8B7D857FF Work /Volumes/Work
Aug 31 15:25:47 localhost diskarbitrationd[54]: disk1s7 hfs 31407C46-35BB-3104-855C-E77EDDFCC0F0 PSScratch /Volumes/PSScratch
Aug 31 15:25:48 Macintosh kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Aug 31 15:25:48 Macintosh configd[52]: setting hostname to "Macintosh.local"
Aug 31 15:25:51 Macintosh mDNSResponder: Couldn't read user-specified Computer Name; using default “Macintosh-000A95BA07A2” instead
Aug 31 15:25:52 Macintosh launchd: Server 2b17 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[92]: exited abnormally: Hangup
Aug 31 15:25:52 Macintosh configd[52]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Aug 31 15:25:52 Macintosh configd[52]: posting notification com.apple.system.config.network_change
Aug 31 15:25:52 Macintosh configd[52]: setting hostname to "Vigor10"
Aug 31 15:25:52 Macintosh lookupd[100]: lookupd (version 365) starting - Thu Aug 31 15:25:52 2006
Aug 31 15:25:52 Macintosh kernel[0]: ATY,Simone_A: vram [a0000000:04000000]
Aug 31 15:25:53 Macintosh kernel[0]: ATY,Simone_B: vram [a0000000:04000000]
Aug 31 15:25:54 Macintosh configd[52]: target=enable-network: disabled
Aug 31 15:25:54 Macintosh mDNSResponder: Couldn't read user-specified Computer Name; using default “Macintosh-000A95BA07A2” instead
Aug 31 15:25:54 Macintosh mDNSResponder: Adding browse domain local.
Aug 31 15:25:56 Macintosh /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Aug 31 15:26:01 Macintosh loginwindow[151]: Login Window Started Security Agent
Aug 31 15:26:14 Macintosh /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer: (-3230) Cannot use ATS Persistent Store - switching to old FODB cache code
Aug 31 15:26:23 Macintosh KernelEventAgent[68]: tid 00000000 received unknown event (12)
The bit about the Apple PMU forced shutdown may be significant.
The only thing I can think to do is reinstall a clean system flolder unless anyone can suggest anything else.

Does Solaris 10 support cisco Virtual Port Channels over IP?

Does anyone know if Solaris 10 support cisco Virtual Port Channels open IP?

Hi user11114413,
The issue you are seeing actually has little to do with VIP, and more to do with there being multiple IP addresses for us to choose from on your box. For such multi-IP boxes, you'll want to tell us the IP to use, and in your case you want to tell as a VIP. This can be done either by editing your operational configuration file, and including an <address> element within the <unicast-listener> element, or via the tangosol.coherence.localhost system property. For example:
<unicast-listener>
    <well-known-addresses>
        <socket-address id="1">
            <address>1.2.3.260</address> 
            <port>8088</port>
        </socket-address>
    </well-known-addresses>
    <address>1.2.3.260</address> 
    <port>8088</port>
</unicast-listener>or
java ... -Dtangosol.coherence.localhost=1.2.3.260If you are using the same operational configuration on all nodes in your cluster then the system property approach is likely preferable, and would only be necessary on the two machines sharing the VIP.
As for using VIP or an extended WKA list, the choice is yours, either will work. If you do go the VIP route, it would obviously be a very bad idea to simultaneously use the same VIP and port at the same time from the two machines.
thanks,
Mark
Oracle Coherence

Maximum Disk-Volume Capacity Solaris 8 supports (SPARC) ?

Any one knows what is the maximum capacity that Solaris 8 on SPARC supports for storage-set ( Raid set, Stripe Set ...)
Can Solaris 8 supports file system up to 2 Terabyes ?
Thanks

Yup.
EOL in November 2002
Which means EOSL November 2007
http://sunsolve.sun.com/handbook_pub/validateUser.do?target=Systems/U10/U10
Unless you've somehow maintained a service contract on that system,
by specific system serial number,
your best bet is to haunt an online auction site (such as Ebay),
and get a replacement cpu or cpus for shelf stock.
Your current OBP patch level is only down two patch levels,
but your kernel patch level is essentially "never patched".
If it were patched better it may have noticed the issue a lot sooner.
Expect to replace that cpu.

Interrupt in a multi-cpu machine

Hi,
I want to know how the interrput is dealed in a multiprocessor environment. Anyone can tell me or point me to the doc. to check?
Will interrupt be sent to different CPU equally or they are given to one default CPU?
Thanks!
Yong

I've seen, however that most operating systems like processor affinity and
          won't go out of their way to spread threads across CPUs due to CPU cache
          synchronization expense. Running two WLS instances on a dual processor
          machine will give you more throughput.
          Mike Reiche <[email protected]> wrote in message
          news:3bcf1d58$[email protected]..
          >
          > You don't need two instances of WL to take advantage of two CPUs.
          >
          > Each WL instance in a cluster requires its own IP address. You can refer
          to them
          > by their IP address.
          >
          > Mike
          >
          >
          > "jyothi" <[email protected]> wrote:
          > >
          > >hi,
          > >if we need to plan a cluster on a multi-cpu machine..how does
          > >the installation of wls go..do we need to install two instances of WLS
          > >on the
          > >machine or do we have to install only one instance??
          > >
          > >also wrt wls6.0, through the admin console running on another machine..we
          > >create
          > >new entries for machine's first and then we create new servers .. how
          > >do we associate
          > >the two servers running on the same multi-cpu machine with the machine
          > >name??
          > >
          > >thanks
          > >jyothi
          >

Compiling on a dual core machine and running the class files on linux.

does compiling on a dual core machine and running the class files on linux have any effect?

well, the problem that i felt was that when i runmy
class files on my machine(windows xp, dual core),
Thread.sleep(60000) sleeps for 1 minute. but wheni
run it on a linux machine, Thread.sleep(60000)sleeps
for 2 minutes. my application has a lot ofthreads.
I can't be 100% sure, but I'm pretty sure that
sleep(60000) doesn't sleep for 2 minutes on the other
machine.I, wholeheartedly, agree.
Due to timing issues it may seem to sleep a few milliseconds more, but not double.
Of course, if there is a "real-time" (or even simply higher than the Java app) priority program running that is using a lot of the CPU it may seem like it sleeps a lot longer than 60000, but that is a different issue.

10.5.3 AFP support for Time machine?

Hi,
Seems that AFP support for Time machine isn't yet available in 10.5.3... At least I wasn't able to get it working with my iMac and QNAP TS-209. Has someone been able to get it working after updating to 10.5.3?
According to news ("Time Machine backupd and new AFP backups")about beta seeds of the 10.5.3 there has been implemented AFP support for the Time machine. Does Apple pulled it off again before final release? I would like to use time machine with my NAS, but seems I have to keep using 3rd party apps for that...
I start to be very disappointed about Apple, because they haven't manage to get it working/enabled yet. It feels that Apple just doesn't want to enable it, because they would like to sell Time capsule for all.... I hope this isn't the case.

Welcome to Apple Discussions!
Never believe any news from beta seeds. They are unreliable, and should be taken with a huge grain of salt. As for whether or not a feature was pulled who knows, except people under non-disclosure. Those who test betas are under requirement to stay mum. We can't guess Apple's policy. Please read terms of use on the right But unless you find it in the feature listing for the update, I would surmise it isn't there, unless someone has managed a hack around. You can always post feedback here:
http://www.apple.com/feedback/
Based on:
http://support.apple.com/kb/HT1141
The only AFP improvement is:
Improves Spotlight searches on a AFP file server volumes.
And while several Time Machine improvements exist, none mention AFP.

Quad Core - Dual CPU's

Does all G5 Quad Core (Dual CPU's) support all MAC OS and all MAC software?
For example, could I run MAC OS 10.x and Final Cut Studio on a Quad Core MAC without any configuration or problems?
Dave

Hi Dave;
I can vouch for what the Innovator says about running with a lower version of OS X. When I migrated from my PM G5 MDD to my Quad, I had forgotten to upgrade my maintenance disk to 10.4.3. I tried toboot from it on Sunday. The maintenance disk was at 10.4.2 so I thought that should be close enough. WRONG! The reboot failled big time. I had to down the 10.4.3 upgrade and apply it to that disk before it would boot.
Allan

Whether solaris 8 os support dual cpu machine?

Similar Messages

Maybe you are looking for