Whether system will allow  to change the  PO Quantity , etc after GRN ?

Dear Expert,
Please let me know whether system(standard SAP ) will allow  to change the  PO Quantity , Net price and Price per unit after partial/fully accepting the GRN against the PO?
regards,
Kumar.

dear,
This is possible in 1 way and not possible in another way.
I will explain you in details:
If Po cretaed of 100 Qty........GRN done for 20 Qty.....Then you can go and can change PO qty to 20 .....
There you can change Qty to 20....System will allow you to change the Qty...
NOw If you want to change the qty less than 20 ( GRN qty)...Then System will now allow you to change it.
Regards
Utsav

Similar Messages

  • What type of add on can I download that will allow meto change the view of my emails in gmail? I would like to have them split view like outlook

    What type of add on can I download that will allow meto change the view of my emails in gmail? I would like to have them split view like outlook

    Dear Sara,
    I notice that you didn't reply to my questioning the this ambiguous stipulation of your services being extended to Adobe's rights in the use of my personal content or intellectual and creative property.
    When I returned to my "files" section in Adobe Reader where they were transferred to in converting them to PDF they had all been removed. Around 6 projects in progress plus notes and several creative design images in one instance (attached to a writing project). I have access to the files and I am downloading Cloud desktop interface.
    Does the interface of Reader in desktop automatically remove them from my online account, making them exclusively offline from here on OR must they be physically removed and so have they been removed by another party?
    Finally, since they are made copyright in the conversion, must future files be made uploaded to signify and account for them as made copyright by the process record in my personal account?
    Excuse my asking lots of questions. My work has been tampered with in the past and I am excited about this service I can avail of in protecting all of my work.
    Yours Sincerely,Liam Anthony Dalton BA, FA

  • System doesnt let me change the delivery quantity greater than sales order

    Hi,
    In delivery document , when I change delivery quantity greater than related sales order quantity , system just show the Message no. VL363 but let me change the quantity.
    Is it any way that system do not let me to change delivery quantity greater than its related sales order?
    thanks.
    Lida.

    Is it any way that system do not let me to change delivery
             quantity greater than its related sales order?
    Go to zeroVLP,  select the item category and maintain "B"  for the field  Check overdelivery

  • Changing the Requirement Quantity in Reserations

    Dear PS Experts,
    In a Project, I created a reservation of 5 units of item A. Then I issued 2 items against the reservation.
    Later on I tried to change my reservation requirement quantity to 6 and SAP allowed it. Then I changed the same quantity to 1 which is below the issued quantity even that was allowed.
    My question is why are the above changes allowed after material issue takes place ? (is it a common business requirement)
    Else, is there an SPRO setting where we can restrict the above?
    Cheers
    Deepal

    Hi,
    That is the standard SAP functionality only. This is not a strange behaviour of the system. If you create any reservations manually, the system will allow to change at any point of time. While creating the production order or MRP created planned orders will create the reservations. That reservations you can't change.
    Regards,
    V. Suresh

  • After creation of PO system should not allow to change the price in PO

    Hi There,
    In my scenario once PO is created then after send to vendor PO print document,Users are changing the price in PO.so system should not allow to change the price in PO once PO got saved.
    So please advice.

    Hi,
    you could set in customizing for field selection keys the net price      
    to display for ME22N so that changes can not be made         
    (transaction OLME -> purchase order -> Define Screen Layout at Document Level).
    Please check that you have set all the relevant field selection      
    groups to display: AKTV, ME22, ME22N... (read and apply note 30316)                                                                               
    Other workaround is try to do by yourself with the badi                      
    ME_PROCESS_PO_CUST and send your own error message.    
    Regards,
    Edit

  • Procurement Key 'F' - System will allow to create production order

    Dear All,
    Pls help solve below issue
    Sub-assembly (HALB) material type with Procurement Key is 'F' - but System will allow to create production order, our management don't want to allow this. how to activate the error messges
    I checked the system messages CO 046, 047, 048 - it will not help for these messages
    Any way to control this (except user exit, badi)
    Regards,
    Sankaran

    Hi Sankaran,
       What I infer from your statement is that user is able to convert planned order into Production Order (MD04 or CO040). You want to issue a warning message during this converion.
      You can configure warning messages through OPJB.
       Whether this material with procurement type F was setup initially with a different setup? Please check whether any routing details exist for this material and also check whether there is any special procurement indicator. One more check is with your MRP Group settings.
    Hope this helps.
    With Best Regards,
    Srinivas

  • System not allow to change planning plant

    Hi Experts,
    My problem is I changed company  code , maintenance plant  & planning plant in old system as per client requirement. They are using same system from last 4 years. I changed all require setting in customization but now problem is that in  equipment task list system does not allow to change the planning plant in header data of  IA02 T code. I updated the new planning plant in Function location master,Equipment master , Work center & assign it planner group but even system shows the old planning plant in task list header data. System shows the planning plant data in display mode.
    Pl advice from where system link the planning plant field in task list header data.
    Thx in adavance.
    AVI DDS

    Avi
    Pete is right. There is no way you can change the planning plant in the Task Lists
    Task list creation is done for a planning plant & you will not be able to use the existing tasklist for your updated equipments having different PPlants.
    The only way to proceed is to create new tasklists
    Delete the old assignments of the tasklists to the maintenance item & reassign the new tasklists to the existing items
    In case you dont want the tasklists in the system itself, you will have to delete the tasklists - ie mark the deletion indicator in the change mode & archive the TLs.
    Regards
    Kartik

  • Should user be allowed to change the Purchase requisition

    Dear Group Members
    Should User be allowed to change the Purchase Requisition for which Purchase order is made
    Regards
    Shamulheq

    Ideally NO but yes if your business need ask for it,
    you should have release str in place. and Value should be one of your characteristics in Rel str
    PR should be changed only on higher side
    notification should be triggered to Buyer in case PR gets approved so that Buyer can take appropriate action on earlier created PO with ref to PR
    If there is NO release str, then look for some enhancement which will trigger notification to buyer so that Buyer can take appropriate action on earlier created PO with ref to PR
    If you donot want user to change the PR , then put validation
    if PR status (EBAN-STATU) = B , then give POP- UP message as Error so that it will restrict user to make the changes in PR
    Hope this helps you

  • Results recording i have rejected but UD system will allow me to post

    Dear All,
    When i am doing results recording i am rejecting the particular item. But system will allow me to do UD for this one. There also i can accept those quantity. Here my client dont want that one. They are asking then what s use of doing results recording.
    There is any configuration is there to achieve this requirement.

    Hello
    There is no config for this requirement.  If the result recording is falied also UD has to be given to the lot. You have to post the material either block or to scrap or return delivery . Also even if parameters in result recording fails some parameters will not be critical and also there can be cases where want to segregate the good items and bad item.
    So in this case if you want to partly post the material , then UD has to be given allowing you to post to unrestricted.
    You cannot restrict the UD, but you can try restricting posting to unrestricted if any results are failed using Exits
    Regards
    GN

  • System is allowing to post the Adv Pmt amount more than the PO Value

    Hi Experts,
    I am FICO Consultant. I facing one problem regarding Advance Payment. We have a process to for making advance payment with reference to Purchase Order and Purchase Order Line Item. But system is allowing to post the advance payment amount more than the Purchase Order Value. I want to prevent this to happen. The system should not allow to make advance payment more than the Purchase Order value.
    Please help me on this issue.
    Thanks in Advance and Regards,
    Alkesh Mistry

    HI
    Please create the Advance payment request with PO number using sp gl indicator as F and then make the advance payment using the request.
    Regds
    Rajiv

  • Is there a Button menu option that will allow one view the names of all the buttons already created?

    Is there a Button menu option in InDesign CS 5.5 that will allow one view the names of all the buttons already created?

    Thanks for your prompt feedback! However, this option does not work for me -- and I'm not sure exactly why.
    Originally, when I tried your suggestion, I got the unsatisfactory result illustrated in the following help request: https://support.mozilla.com/en-US/questions/758172
    Now I am in the process of testing several new add-ons to fix this problem, and I am getting a very different (and even more unsatisfying) result illustrated in the attached image -- so I realize the problem may now be compounded by one or more of the new add-ons.
    (See the attached image that illustrates what happens now when I click on the MyDocs URL after is has been added to my Bookmarks tree.)
    UPDATE: I'm going to try the LocalLinks add-on to see if this will help me open local links using my FireFox bookmarks: https://addons.mozilla.org/en-US/firefox/addon/locallink/
    Will let you know if it works....

  • WM-production order-need change the open quantity in Transfer order

    Hi,
       I created the production order (order quantity 1000).  i did material staging and generated TR. .
       But i need to change the open quantity in transfer order . i need to create the partial Transfer order
        against TR..
       KINDLY SUGGEST ME
       WITH REGARDS
       Dinesh

    Hi Dinesh,
    TO for partial qty is possible.
    When you are doing material staging with 319 mov.type, you create a transfer order for partial quantity as follows:
    You first create a manual transfer order using transaction LT04.
    You specify the TR number in the intial screen and navigate to the detail screen, system shows the Open TR quantity and the proposed TO quantity. By default, both these quantities are equal to the TR quantity.
    However, when you create by clicing the "Create TO button" (the icon with a plus sign in the tool bar of LT04 screen), system takes you to another screen where it asks for the "Requested Qty" on the top of the screen.  Here you can modify the qty as per your requirement; then you can check and confirm the storage type and storage bin for source and destination stocks & save.
    It is important that you give the correct source storage type & storage bin that is having stock or otherwise system might give error message.
    System will create a TO line item with the entered qty and propose the balance TR qty as the 2nd TO line item. You can skip this 2nd TO item or delete it from the TO.
    Once again, if you click the Save button, system will save the TO with the partial quantity.
    The balance quantity will be available in the TR as open quantity and this can be seen in the header data of transaction LB03.
    Regards
    Prabhu

  • Changing the document page size after the fact.

    Does anyone know of a way to change the page size globally after the fact?
    I have sent a 200 page book created with Pages '08 to my printer. The work has a full bleed watermark in the background on a custom 7" X 11" document. I've just been informed that he needs to increase the paper size to 7.25 X 11.25 and have me increase the watermark so it can be trimmed down.
    Is there a way to change all 200 pages or do I need to set-up a new document and do a whole lot of cut and paste?
    Thanks in advance everyone.

    Your problem is that the change is not proportional.
    However it is not a great change, 6.66% at most. If you don't mind a subtle change in height vs width, just create a pdf of the entire document and tell the printer to change the size on going to plate.
    Alternatively you can simply scale it up the 6.66% which will make the height about 0.5" too high and trim away the excess.
    The other way is only scale it up 2.27% which gives you the right height but leaves you with 0.1" less width.
    Or you can go in between and have a compromise for both directions by scaling up 4.4%.
    It depends if you have white margins in either direction that can take up the slack and also how much bleed you have on the watermark. You only need 1/8" to cover any trimming errors.
    As this appears to be quite a long book and would need to be imposed up in signatures, I would imagine the printer must have the necessary imposition software to allow for creep etc, which should also allow for non-symmetrical scaling.
    Don't you Americans ever feel at moments like these that you wish you weren't the last people in the world to not use metrics and rational paper sizes?

  • I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!

    I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
    I am also providing you with a screenshot of what appears! I need photos on my iPad2
    Message was edited by: angana

    You don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
    You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it.

  • Change the stock quantity!!

    Hi
    Is ther any fm for changing the HU Quantity . I tried using HUINV_ITEM_CHANGE , doesn't seems to be working..
    pls help
    Regards
    Gunjan

    Hi Gunjan,
    Actually calling HUINV_ITEM_CHANGE will not update the database. All the function module does is update an internal table viz. "gt_inv_item" which is part of the function group HU_INV. In this function group, there exists another function module viz. HUINV_POST_DB which actually posts/commits the changes from the internal table into the database.
    Hence I would suggest you go through the function group mentioned above and a possible solution might come in the form of using a sequence of call functions to achieve the result.
    Hope it helps.
    Rgds,
    Aditya

Maybe you are looking for