WHICH ADAPTOR DO YOU USE FOR THE TV OUT OPTION TO VIEW IPHONE ON YOUR TV?

I know that the Sept update includes a TV out option on the Ipod section of the Iphone but what connector/adaptor is used for this function? Please advise. Thanks so much for any input on this mattter!

Yes and just to complete this you can also buy the Universal dock (the new one) that comes with a remote control -- the composite/component cable plugs into this dock so you can just slip your iPhone into it and watch TV (much easier than plugging/unplugging the cable at the bottom of the phone, and the remote is very sweet).
Only drawback is that both the cable and the dock cost $50 a piece, so you're looking at around $100 for a TV solution. Still, I have two of them (one component and one composite) and the picture (with 640 resolution) is excellent on both my big screen (38") sets -- the equal of a DVD.

Similar Messages

Which Bag do you use for your Camera? What about the GadgetBag 300EG?

Which Bag do you use for your Camera? What about the GadgetBag 300EG?

I agree - it's all about preference. I use the ThinkTank Retrospective 7. I *love* ThinkTank's attention to detail... everything from having a rain cover included with the bag, to having ingenius use of velcro (sp?) patches to enable you to "silence" the bag so it doesn't make the big "SCRATCH" sound when opening the bag during a quiet event, etc.
My best advice would be to do your research (which you're clearly doing) and have a clear understanding of the return policy wherever you buy it, and then don't be afraid to return it if you get it and feel it doesn't meet your needs. A restocking fee is a small price to pay to not be stuck with a bag that doesn't work for you. And if for any reason you get it and can't return it, there's always eBay.

Which tool do you use for load testing?

Which tool do you use for load testing for J2EE application?

hi,
i use jmeter for without issues..
first make sure that the system from where you are doing load testing is in the same lan(without firewall) to that of server. Here you are testing the capacity of server and not the network bandwith.
So assuming very good network connection what is the servers performance level...
If u have to decide which tool is decent enough to load testing,
i would suggest go for jmeter. its reliable and i have used it without problems.
Here is my quick tutorial for jemeter which i made for my teams reference.
REFERENCE
     For Getting Started refer to any tutorial for Jmeter
     You can refer to introduction on
          http://jakarta.apache.org/jmeter/usermanual/
RUNNING LOAD TEST
     Extract jakarta-jmeter-2.3RC4.zip in c:
     install jdk-1_5_0_12-windows-i586-p.exe
     Run C:\jakarta-jmeter-2.3RC4\bin\jmeter.bat
     In Test Plan add Thread Group
     Right Click Thread Group -> Add->Sampler->HTTP Request
     Select HTTP Request added fill details
          Serverip:www.xyz.com
          Port:80
          Path:/xyz-webapp/index.jsp
          Use KeepAlive: Checked
          Retrive All Embeded images from HTML: Checked(For geting images inside html)
     Right Click Thread Group -> Add->Listner->Graph Results
     Click on Thread Group Fill details
          No of Threads:3(This means no of simultaneous users)
          Ramp Up Period:1(3 Request will be made in 1 second period)
          Loop Count:5(Above process should be repeated how many times)
     Save TestPlan
     Run -> Clear All
     Run -> Start
          Click on Graph Results for Output
     Try adding different listener in Thread Group
          Thread Group -> Add->Listner->Summary Report
     Listeners coud be added at thread group level or HTTP Request Level
RECORDING A TEST.
     Add a HTTP proxy server in workbench by right clicking on it and selecting Add->Non test Element->HTTP Proxy Server.
     In Test Plan Add Thread Group
     In HTTP proxy server select Target Controller as Test Plan > Thread Group.
     Go to Internet Explorer and go to internet settings and set proxy server as localhost and the port
          which is configured in Jmeter proxy server.Save Settings.
     In Jeter proxy server start by Clicking on Start button in the HTTP Proxy Server Flap.
     In browser navigate the application which you want to test.
     The nodes will be added in the Thread Group.
     Once Navigation is done stop the proxy server and save the test plan from file menu.
LOGGING INTO APPLICATION.
     When we have to login into system and then navigate the system
          we need a cookie to be tracked after login. This could be achieved
          simply by Add -> Config Element -> HTTP Cooie Manager.
     After adding the HTTP Cooie Manager simply run the test.
LOOPING COUNTER.
     When a request is made multiple parameter is sent to server.
     Parameters are sent from the HTTP Request node added in the Thread Group
          in "Send Parameter with the request" table.
     If we run the loop count 10 times the parameters will be sent same in every request.
     If you have to send parameters like user1,user2,user3,user4....
          then add -> Pre processor -> Counter.
     Put start as 1 and and Maximum as 10 or whatever required.
     Put Referene name as iCtr or whatever.
     In the "Send Parameter with the request" in value column put user${iCtr}

Which bag do you use for 14 inch wide screen?

Which bag do you use for 14 inch wide screen?
I got confused when searching for possible candidates. Almost all wide screen bags are designed for 15.4 inch. Few 14 inch bags are fit only for the normal 4:3 screen.
Any advice from you are welcomed!
Many thanks!

Hello,
Other brands you might want to look at are Brenthaven, Case Logic, Eagle Creek, EastPak, EZM, Jan Sport, Kensington, Swiss Army, Targus and Trager. There is also an earlier message thread here in the forum discussing carrying options, and a quick search of the Internet found some messages here, here and here that you might find of interest.
There really are lots of different solutions when it comes to carrying your ThinkPad, so it might be best to visit a few computer, electronics, office supply and sporting goods stores to find something you like and meets your needs (and budget). If you do not have your ThinkPad to yet, consider either bringing a tape measure or a piece of cardboard cut to the dimensions to "test" with bags.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

What camera raw default settings would you use for the Canon 5D Mark 3. I have PS CS6. Thank you.

What camera raw default settings would you use for the Canon 5D Mark 3. I have PS CS6. Thank you.

Really, this is a question you should be asking yourself...
What do you shoot? Makes a difference...
Typical ISO that you shoot? Makes a difference...
Shooting for clients or yourself? Makes a difference...
Look, there is no magic bullet...the ACR/LR "Default" should only be changed for those adjustments you make 70-90% of the time and sould not be confused with image by image adjustments...
So, as asked, your question can not really be answered other than to say, use a default that suits you.

HT3669 which driver should i use for the epson LX300 matrix-dot printer??

which driver should i use for the epson LX300 matrix-dot printer??? I dowloaded all drivers for epson but i didn't find the driver for the LX300.
I bought an i mac not so long ago, can anyone help me about this?

i use parallels desktop 7 because i use a program for work with windows XP. Is there really no solution?

Which router do you use for AppleTV?

So I got to thinking the other day that maybe there are just certain routers that no matter what will not work with AppleTV.
The only one that I have gotten to work EVERY time and consistently is the Airport Extreme Base Station.
My gf had a belkin (I don't remember the model #) that no matter what, I could not get it to remain consistent i.e. had to restart almost every day, randomly showed port 3689 error, etc
I tried the normal stuff, enabling uPNP, port forwarding, etc..nothing helped.
With the AEBS (which I already had and made her get) everything was fine and dandy.
So my questions to you are:
1) If not the AEBS, which router do you use?
2) If not the AEBS, which settings did you have to set?
3) If not the AEBS, what is the model / firmware version of your router?
I noticed many people have problems that are the same things on this board over and over. And I've also noticed that it's usually the router and/or the settings that are causing the issues/inconsistencies.
This should be an interesting thread and should help steer people in the right direction.

capaho wrote:
Airport Extreme doesnt have enuf port forwards for most online games & so I avoided that one.
There is no limit (short of maxing out system capacity). It may not have the presets you want, but you can configure port forwarding manually.
indeed, i can confirm this.
i have many ports forwarded on my AEBS and it is very easy to configure to do so.

Which software do you use on the linux or unix platform

I am learning oracle, so I am wondering, in the real world, which software do you use to administrate oracle in the company, on the linux or unix platform? sqlplus?
certainly, I think you can also open the OEM GUI in linux or unix

If you are learning, surely enough , learning any o/s other than windows will help. About the industry, there is not just one player that rules in the o/s market. It depends on a lot of factors , cost being the most dominating one. Linux, being a little less costlier, is surely a good choice for many but so is HP UX or AIX. Without bothering about what is more popular, learn one which you can get your hands on in your learning environment more easily. For example, it would be tough to have a AIX based machine in your home and a linux based would be lot easier. So learn one, ,learn it good. When you go to a different shop, use your previous knowledge and learn the know-hows of that o/s as well.
HTH
Aman....

What Plugin do you use for the Mastertrack

I am curious to know what plugin people use for the mastertrack, given that there is only one open slot .
Any recomendations

I have been using this free AU for a while now on the master track:
Slim Slow Slider: C3 Multi Band Compressor 1.2
http://www.apulsoft.ch/freeports/
Scroll down the page from the above link to find the C3 Multi Band Compressor 1.2
Features:
Three stereo compressors.
A master limiter.
Flexible dividing filters(ButterWorth Filter or LinearPhaseFIR Filter).
Sampling Rate: 44.1k, 48k, 88.2k, 96k support.
32bit float internal precision.
I really like it, however it does not come with a manual.

Need Help regarding which Material Type to use for the Scenario

Hi,
Here we are configuring the service scenario.
Suppose Electric Switch of customer flat is not working.
Here in this case I will purchase the switch. And along with service order
I will do the delivery of the Material. Then will raise the Invoice to the customer
with service charge as well as material cost.
Here I will have to run the MRP also for that material to raise the PR if stock goes below
the reorder point.
So I will have to maintain the Purchase view, Sales View & MRP view to that Material.
So in this case which standard material Type can I use for this material? Or I have to create
our own material Type for this material.
Regards,
Pradip

ROH is usually a material type that is supposed to be consumed in production.
HALB is a semifinished good, own produced and meant to consumed in production.
Both are usually not forseen to be sold.
A material that you buy yourself and sell to a customer is a trading good, which is HAWA in SAP.

Which architecture do you use for OIM 11g IHM (admin, self service, etc)?

Hi,
I would like to know if you use :
- The native IHM with native extension (Event handlers, prepopulate adapters, etc).
- Custom tabs in ADF added to OIM.
- A web application in ADF (war) added to the oim.ear.
- A J2EE application in ADF which communicates through webservices.
- A J2EE application in another technology which communicates through webservices.
- Other architectures.
And why did you choose this architecture?
Thank you very much for your replies.
Regards
Pierre.

Note that you can use the internal LDAP that comes with WebLogic, for your users and groups if you want.
When you have multiple domains, you have a problem with this set-up as the internal LDAP is coupled to
a specific domain. This means that users you created in one domain are not visible in the other. When using
a separate LDAP that contains the users. You can configure in each domain an authenticator that points
to the LDAP. In this way you can share to user accross multiple domains.
When you are planning to use one domain you can stick with the internal LDAP if you want.
An example set-up (that uses access manager not identity manager) can be found here: http://middlewaremagic.com/weblogic/?p=7819,
which might help you in how to proceed.

HT201320 I use my college's email address through outlook and I don't know what you use for the incoming and outgoing host?

My email is though the college where I work. We use Outlook, and I am trying to set up my email but I am not sure what to use for my incoming and outgoing host information.

Ask your college. Most likely the same settings as you have set in Outlook.

Survey: Which technique do you use for ActiveSync resource provisioning?

Just curious to see what the consensus is on the methods for setting attributes for provisioning users with an active sync resource adapter:
A) Input form
B) Workflow (called by input form)
C) Workflow (called by process rule)
D) Combination of above
It seems to me there would be a lot of overhead associated with using a process rule/workflows since workflows save state in the repository. That would mean for 1000 users, 1000 workflow states would be generated (but then cleaned up), wouldn't it?
Has anyone done performance/load testing for the various options? I guess I am looking for some best practices for going one way versus another.

We used A) where input is flat file based... but use C) whereever possible.

Which Monitor shuld be used for the below alert logic?

ALERTING LOGIC:
===============
         1. Alert if EventXXX is trigerred in Application Log,
         2, Alert if EventXXX fires 3 times in 45 mins in Application Log
         3, Alert if EventXXX has not fired in the past 10 mins in Application Log
Need to configure in SCOM 2007R2. What monitor should be used?

1. rule based on an Event ID
http://blogs.technet.com/b/operationsmgr/archive/2008/11/12/opsmgr-2007-how-to-create-an-alert-rule-based-on-an-event-description.aspx
2. Repeating Events
http://technet.microsoft.com/en-us/library/hh457566.aspx
3. Missing Event
http://technet.microsoft.com/en-us/library/hh457594.aspx

Which FXs do you use for Remix Vocals?

Lets say, that it sounds like the Madonna Remixes Tapes. I´m thinking about the JamesBond Song. Of course I know many things depends on the Singer, but the I never done somethings like this and need advise to get close to this art.
I don´t have any extra bundles or AUs. Only Logic Studio.
Many thanks
Martin

if you are talking about filtered voice try the best "plugin in the world"...._)
is a Logic plugs from over than 15 years
it is called
"Spectral Gate"
AWESOME!
G

WHICH ADAPTOR DO YOU USE FOR THE TV OUT OPTION TO VIEW IPHONE ON YOUR TV?

Similar Messages

Maybe you are looking for