Which Adaptors/Cords do I need to hook my  mid-2010 Macbook Pro into my new HDTV?

I heard they changed the port (to include audio as well as video) after my model and I want to make sure I order the right adaptors so I can hook my macbook into my new HDTVs HDMI port.
Can someone point me in the right direction?
Thanks,
Jake

I don't know that it will carry audio on a mid-2010, but for less than $7 you can try this adapter from Monoprice.
Worked great on my late 2011. Should work for you.
Clinton

Similar Messages

  • I have a mid 2010 macbook pro with 4GB memory and need to purchase an additional 4 GB.  Do I need to purchase 8GB of memory to upgrade or can a 4GB upgrade be placed next to the existing memory?

    I have a mid 2010 macbook pro with 4GB memory and need to purchase an additional 4 GB to.  Do I need to purchase 8GB of memory to upgrade or can a 4GB upgrade be placed next to the existing memory?

    You need to purchase 8 GBs as two 4 GB modules. Must meet these requirments:
    Maximum Memory
    8.0 GB
    Memory Slots
    2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

  • What cords do I need to hook up my mac book pro to a Toshiba 32 T.V.

    I'm trying to find out if anyone can help me with finding out what accessories I might need to hook up my mac to my toshiba 32 T.V. I could probably use a little guidence when it comes to istallation as well.

    Assuming you have a recent MBP, i.e. purchased new in the last couple of years, and that your TV is modern one with HDMI inputs then you need a mini-displayport to HDMI cable.  Apple have one:
    http://store.apple.com/uk/product/H7128ZM/A/mini-displayport-to-hdmi-cable-2m?fn ode=MTY1NDA3Ng&s=topSellers
    Installation involves connecting up the cable, then it's pretty much plug-and-play. The MBP should auto-detect your TV and you're good to go!

  • What cable(s) do I need to connect my late 2011 MacBook Pro to the new VIZIO HDMI tv in my classroom?

    I want to use the VIZIO large-screen TV mounted on the wall of my classroom to mirror the screen on my new MacBook Pro.
    I am already mirroring my iPad 2 with GREAT results using AppleTV.  Using the HD Note Taker App is a dream. 
    Graphing calculator apps are brilliant, too.  ( I teach Precalculus and AP Calculus) 
    But now I need to be able to do new things that cannot be done on the iPad.  What cables and/or adaptors do I need so that the
    flat-screen TV becomes a another monitor? 

    You need a MiniDisplay port to HDMI adapter and a HDMI cable.  The MDP adapter plugs into the Thunderbolt port.
    http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er?fnode=MTY1NDA3Ng
    When you first connect, it will default to "extended desktop mode".   To mirror, press CMD F1 or set mirror mode in System Preferences > Displays > Arrangement tab
    Regards,
    Captfred

  • Need an SSD for a mid 2010 MacBook Pro...

    My HDD suddenly died on me! No warning. It's still spinning away, clicking away but totally dead. Not even showing up on any disk repair recovery programs, ***?.
    Anyhoo, I need a new HDD and have decided to go with an SSD.
    I have a mid 2010 15" 2.66 i7 MacBook Pro, and am wondering what SSD spec I need to be looking for.
    I'm pretty sure that the new drive would need to be SATA II. Anything more would be over kill.
    Other than this, any other considerations regarding compatability that I need to be aware of?
    Thanks guys, for any pointers offered.

    It depends on how much you're willing to spend. A ~250GB SSD will cost you around $400-500, depending on the make and type (SATA I vs SATA II). My minimum recommendation for any boot drive size is in the 80-120GB range (leaning toward the higher end of that), and these will cost between $100-$200 for an SSD. SATA II SSDs will be more expensive than SATA I versions, but the performance of the SATA I SSD will be well above the performance of an SATA II mechanical HDD.
    These days, if you're up for it my recommendation is a ~120GB SSD replacement for the optical drive (there are several companies that sell brackets for holding 2.5-inch drives in the optical drive bay), which will allow you to use the SSD as a boot drive and the existing HDD as a storage drive. It's great on battery life and offers exceptional performance for the money.

  • Mid 2010 MacBook Pro - Logic Board Failure - Advice Needed

    Hello all,
    I could really use some advice.
    I have a MacBook Pro that I bought through the Apple Online Store roughly around September of 2010. A couple of weeks after buying it I had to take it to the Apple Store in London's White City due to a keyboard backlight issue. About a week later I collected the MBP and the following day had to take it back as the technician that worked on it had not tightened the display brackets up leaving it a bit floppy.
    Now I have serious issues with it. Recently the MacBook has been suffering from freezing up, booting issues and the display randomly shutting off (going black, no pixelating or anything) to the point the machine has become unusable. 2 days ago I took the MBP along to an appointment at the Genius Bar at London's Regent Street Apple Store, I also took along a copy of an Apple knowledge base article regarding this very issue. The knowledge base suggests that on any OS below Mountain Lion a software update is required, for ML or Mavericks an appointment with a service agent is required. During the appointment the Mac Genius suggested it may be a software issue, they would wipe the system and re-install Mavericks then test the machine, I told him I had done this a few days earlier but I guess they have to follow process. He then went on to suggest the display may be faulty, I told him I had no reason to suspect that was the case and moved the screen forwards and backwards at varying speeds without a glimmer of a flicker. At this point after reading about this issue on various forums prior to the appointment I felt that the guy was trying to imply anything maybe at fault but deliberately steering clear of suggesting the logic board, this is just my gut feeling however and i'm perfectly capable of being wrong but I do not feel I am! Anyhow I then proceeded to demonstrate the issue whilst the machine was on, warmed up and right in front of him. I gently and slightly lifted the front left corner of the machine a little way off of the counter, just enough to obviously flex the logic board by a minuscule amount and immediately the display went into a frenzy of going off and on.
    So I left the MBP with them for the guys to do their thing. Today I received the following email:
    "We have attempted to repair your machine by erasing all the data off your machine and reinstalling the latest operating system, Mavericks. This has not resolved the issue of the screen going black when in use. The issue has occurred again for a very short and brief few times once the machine had fully turned on and after testing the issue did not appear again.
    I'm sure the issue will more likely occur again, to repair the machine we would need to replace a part known as the main logic board. This repair is very expensive and will come roughly to £418.80."
    £418.80 GBP, that's pretty much 25% of the original purchase price of the machine new, a Premium 'Pro' labelled machine just 3 years old at that. I cannot possibly afford to pay for the repair. I really despair.
    This MBP has done no work hard enough for it to get stressed. It is used for some web surfing, online shopping, email, online flash based games but mostly for my kids homework. It has spent it's entire life on a table in our living room with the exception of it's Genius Bar trips.
    I love Apple products, it's why as a family we own so many off them. Too many to list on a public forum as I don't want would be burglars inviting themselves around sometime. This issue has tainted my perception of both Apple and it's products. Not so much because of the fault, machines become faulty. No because it's a premium machine that cost me £2100 new and is little more than a paperweight at present just 3 years down the line. Some part of me if i'm honest was wishing but more than that expecting a company like Apple to say along the lines of "This has happened, it shouldn't have and will be repaired at no charge". There are many people suffering this kind of problem with this model and the existence of the knowledge base article must mean Apple knows it too. Just 3 years, £300 PCs last longer than that i'm sure. It does seem to be a very short lifespan for such a high end machine.
    My apologies for droning on but I can neither afford the repair or do without the computer, my son is in his final GCSE year at school and my daughter in her pre GCSE year so a computer is critical for school homework research etc. I just do not know how to move forward, I haven't even picked the machine up yet!
    This isn't a stomping Apple, one man crusade. I just need my MacBook fixed.
    If anyone has had this problem and had it satisfactory resolved, knows who to speak to that may help resolve the issue please let me know.
    Any other advice will be more than welcome.

    Ive repaired 1000s of laptops over the years (translate: diagnose and replace parts).
    Its not that old, Ive owned 100s of laptops (most were free) ....some I still have are nearly 13 years old and still perfect, ....some extremely expensive ones died in under a year.
    other than becoming obsolete at some point, there isnt really any "will spoil on" data like Milk for solid state computer parts, ....alas.
    You can have a $5000 laptop die in 4 months, and a junker one keep kicking after 10 years.... Ive seen that firsthand countless times.
    Common logic dictates that "very expensive = long life" in computers,..... but all the repair people will tell you just the opposite.
    I know you have a gripe, I get that all too well honestly .

  • I think I might need to restore my 2010 Macbook Pro

    I am worried I am going to need to do a full erase and reformat of my hard drive.
    I have a mid-2010 MacBook Pro; 2.66 GHz Intel Core i7; 8gm Ram; Running OS X 10.8.5 (I haven't updated to Mavericks because I run an older version of ProTools that isn't supported).
    Over the past several months, my computer has gotten slower and slower.  I have had a few instances of a fatal error, where the machine just shuts down.  I've tried resetting the SMC system but that does not appear to have made a difference.
    I still have the disks that came with the computer, and my App Store shows OS X Lion and OS X Mountain Lion in my purchase history, so I expect I should be able to get back to my current operating system without incident.
    I'm writing to see if anyone has advice on how to make this as smooth a process as possible.  I have a lot of 3rd party software that will need to be reinstalled so I'm dreading this but don't know of another way to try and fix my performance issues.  Any suggestions are appreciated.

    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with visits to:  OS X Maintenance - MacAttorney;
                                      The X Lab: The X-FAQs;
                                      The Safe Mac » Mac Performance Guide;
                                      The Safe Mac » The myth of the dirty Mac;
                                      Mac maintenance Quick Assist.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Repair the Hard Drive - Lion/Mountain Lion
    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    Suggestions for OS X Maintenance
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
         1. Carbon Copy Cloner
         2. Data Backup
         3. Deja Vu
         4. SuperDuper!
         5. SyncTwoFolders
         6. Synk Pro
         7. Synk Standard
         8. Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Referenced software can be found at CNet Downloads or MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • Please Help~Need to swap data between two 2010 MacBook Pros

    Ok I have a 13" mid-2010 MacBook Pro and my wife has a 15" i7 2010 MacBook Pro. I need her MacBook's processing power to start doing some short videos for our church (After Effects, Premiere). She prefers the lighter 13" anyways so we've decided to swap. I've made two "complete" backups onto a partioned external hard drive using the software, Carbon Copy Cloner. My objective is to swap all data AND settings from one to another and vice versa. She has very important settings on her MBP that cannot be lost. What is the best route to take from here?
    Thanks in advance for your advice!
    Message was edited by: Muzik74

    Pretty easy, using the original Install Disc that came with each computer restart the computer while holding down the Option key. Choose the Install Disc to boot from. Then choose the language and next choose the Utilities Menu-Disk Utility. Once you are in Disk Utility choose the internal HD of the computer-Erase tab (ensure it's set to Mac OS Extended (Journaled)-Erase. Once the erase has been done then exit Disk Utility and continue with the installation. At the end of the installation it will ask if you want to restore from a Volume connected to the computer. Choose that option and choose all the options and within a couple of hours the machine will look and act like your old machine. Do the same with the other computer and you're done with the swap.

  • What cable do I need to hook a 4 pin firewire cable into an iMac (21in late 2013)

    What cable do I need to hook a 4 pin firewire cable into the back of an iMac (21in late 2013)?

    One of these:
    Thunderbolt to Firewire Adapter
    http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r

  • I Do I need an anti-virus for my macbook pro or not and which is the best anti-virus for it if needed and i can download it from which site?

    Hello everyone.I just wanted to know that do i need an anti virus for my macbook pro and if yes then which is the best anti-virus for it and i can download the anti-virus software from which site? Thanks for everyones help for my previous question..it really helped me.

    There's no know virus that can impact a Mac, but if you run Windows via Parallels or Boot Camp then you're just as vulbnerable as any PC user.
    If you want to scan your system to be sure check out the free utilities ClamXav and Sophos Anti Virus

  • What do I need to do to upgrade my macbook pro 17 from OS X 10.4.11 to Version 10.5.8

    What do I need to do to upgrade my macbook pro 17 from OS X 10.4.11 to  OS X 10.5.8

    Locate and purchase a copy of Leopard. They may be found on eBay and Amazon.com. Be sure to only purchase a retail package.
    Or you can save a little money by upgrading to Snow Leopard which costs $29.00. If you dec8de to purchase Snow Leopard, you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.

  • HT1846 which edition of windows 32 or 64 bit are supported by macbook pro late 2011

    which edition of windows (32 or 64 bit) are supported by macbook pro late 2011

    I would go so far as to say there is no reason or need for there to even be 32-bit version.
    64-bit has better memory and graphic handling with whatever you have.
    http://www.amazon.com/s/ref=nb_sb_ss_c_1_16?url=search-alias%3Dsoftware&field-ke ywords=windows+7+system+builder&sprefix=windows+7+system%2Caps%2C201

  • What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...

    As the topic says,
    What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...
    Help me out please.

    Yes ... minidisplay
    But what I do not like in that picture (my personal view, others may think differently), is that there is much plastic around the connectors where the cable must fit.  You may ot may not be able to get the cable to *fully seat* with the adapter.
    Other adapters (http://www.microcenter.com/single_product_results.phtml?product_id=0334087, yes I know this is a DVI) hve no plastic barriers to connections.

  • I am having problems rebooting my mid 2009 macbook pro (grey screen other issues), need help!

    I am having problems rebooting, I have experienced the same problem as others with the grey screen but my case is a little different, It started with my mid 2009 macbook pro acting a little slower than normal, the screen would freeze, mouse wouldnt move and i'd be forced to "force reboot" this went on for a couple of days until i was tinkering with the wifi connection and it froze again. I had to reboot and this time i noticed that it took a long time to get to the login screen. i put in my password and it went into infinite load (i also tried the guest account and other accounts with same result). i tried rebooting again and the same thing would happen. after several reboots, the screen just stayed grey, sometimes with the apple logo and gear sometimes without it. Since its a 2009, (and for the most part, still works like a champ) i decided test the ram, i took one stick of ram out at a time to see if i could notice anything wrong with them. when i stuck just one in, the mac was still having the same problem rebooting. i pulled that ram and and stuck in the other and i noticed that this time the apple logo never appeard and a big crossed out circle appeared. figuring that the ram must be the problem, i ordered new ram and installed it. i noticed that when i rebooted for the first time with the new ram it was rather quick and took me straight to the login screen and i was able to log in with no problem. at this point i thought the problem was solved, but i noticed the macbook still acting funny. at first, none of my files appeared on my desktop or in the finder window. after about 20 minutes, everything magically popped up. i also noticed long pauses/freezes with the colored pin wheel spinnig. i closed the laptop and opened it again and the screen just stayed black. i tried rebooting again, and again i got the grey screen with no signs of being able to log in... i waited about 20 minutes and tried to reboot again and again i was able to log in, however the macbook is still acting slow and will freeze with no signs of unfreezing without a reboot.
    my macbook is 5 years old and has plenty of miles on it, so i understand if the thing needs to be replaced alltogether but does anyone know what could be the issue? could the bad ram have corrupted the hard drive in anyway? would re-installing the OS fix it?? and if so, how would i do that if i downloaded mavericks from the app store? are there any other solutions to this problem?
    all my files and what not are backed up on an external HD so theres nothing on it that i'd miss desperately if i had to whipe the hard drive but id really like to get her working again without any whiping of the HD. if anyone can help me out, it'd be greatly appreciated

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. 
    How large is your hard drive and how much hard drive space do you have left? 

  • I have a very old (by computer standards) MacBook Pro, and a newer one.  I've been using the old one mostly for iTunes, into which I have only CD entries.  For a long time, years, the old MacBook pro ceased entering the song titles.  This is very time con

    I have a very old (by computer standards) MacBook Pro, and a newer one.  I've been using the old one mostly for iTunes, into which I have only CD entries.  For a long time, years, the old MacBook pro ceased entering the song titles.  This is very time consuming for me, so I finally investigated a bit further.
    I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased!  But when I tried to do the same with the other laptop, it failed. 
    What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc.  And yes, I did upgrade the old laptop to the newest iTunes version.
    Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
    My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available."  The newer one  a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
    Both are using the same version of Snow Leopard--10.6.8.

    I have a very old (by computer standards) MacBook Pro, and a newer one.  I've been using the old one mostly for iTunes, into which I have only CD entries.  For a long time, years, the old MacBook pro ceased entering the song titles.  This is very time consuming for me, so I finally investigated a bit further.
    I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased!  But when I tried to do the same with the other laptop, it failed. 
    What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc.  And yes, I did upgrade the old laptop to the newest iTunes version.
    Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
    My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available."  The newer one  a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
    Both are using the same version of Snow Leopard--10.6.8.

Maybe you are looking for

  • Credit block

    Hello, I have activated the Credit management (Static) and assigned the credit limit for the customer Rs 100000 in FD32. Now I created a sales order for the value of 10000 only and saved. When I am trying to create the deliver I am getting the error

  • How to find workarea ID for the work area name.

    Hi Experts.. How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relation

  • Error while building application installer and exe

    i had tried to build an installer and exe for my appication which application and exe building is successfull. but when we install it over the system it does not read  analog input and digital inputs and showing NaN in the indicator,I have treid many

  • I need to upgrade informatica from 8.1.1 to 9.0.1  - Is there a direct path

    I'm looking to go from 8.1.1 to 9.0.1 Is this a direct path upgrade or do I have to go from 8.1.1 to 8.6.X . I've been able to find docmentatin called Upgrade Guide for PowerCenter 8.5.x and 8.6.x, but can't find any on Upgrade Guide for PowerCenter

  • Remote control using DCOM: Error: "ActiveX component cannot be created."

    Hello, I want to address a OMICRON CPC100 device via remote control. I have a dll ("TESTCONTROL.dll"), which provides methods to control the CPC100. In order to encapsulate this functionality, I've written a VB.NET-dll ("CLC_CL_for_Net.dll") (it's a