Which among the two outbound queues has the highest priority?

Hi guys, pardon me for the following questinos, im just a newbie in XI/PI.
1. Which among the two outbound queues has the highest priority, XBTA or XBTM?
2. Can someone elaborate more the difference between the Large outbound queue (XBTM) against the normal (XBTO) and the low (XBTZ) priority queues.
3. If i have alloted an outbound queue for large messages (XBTM), will the messages going out of this queue affect the other queues (high, normal and low)?
4. If messages do get stuck in either the inbound (XBTL) or the outbound (XBTM) queue, will this affect the other queues as well?
Thanks.

Hi Guys,
Can anyone help me to solve this issue.
Regards
Srinivas.

Similar Messages

  • I am a SAP Netweaver Consultant , want to know from all the SAP Experts out here that according to you which are the highest paying modules in SAP ? rank them.

    I am a SAP Netweaver Consultant , want to know from all the SAP Experts out here that according to you which are the highest paying modules in SAP ? rank them.

    Hi S. Vishwam.
    Many peoples says that BI , APO , BW and HANA are the highest paying modules.
    But with the passage of time the value of the professional decreases because many people go work with this modules then ...supply and demand = decreases.
    Only the people that really knows continue making lots of moneyand the characteristic of these people are the same:
    They always read the SDN community of his modules.
    They really study the sap help.
    They do not want to make lots of money early on.
    Hope helped you.

  • Which is the highest Mac OS i can put on my G5 Dual 2Ghz?

    Which is the highest Mac OS i can put on my G5 Dual 2Ghz?

    OS 10.5.8 according to this site:
    http://www.everymac.com/systems/by_capability/maximum-macos-supported.html

  • How does CRM on Demand determine the highest priority Task?

    In the "My Homepage -> My Open Tasks" List there is a sortable priority column. If you have a number of tasks in the list with different priorities and click on the priority column they will be sorted in descending order by priority as follows:
    "1-High"
    "2-Medium"
    "3-Low"
    I have tried editing the order on the Edit Picklist screen for the Activity Priority field (by navigating to Admin -> Application Customization -> Activity -> Activity Field Setup) but this appears to have no effect on the priority sort order on in the Task List. I have also tried adding new values to the picklist and they always appear as the lowest priority.
    So my question is how does CRM on Demand determine that the priority picklist value "1-High" is the highest priority when sorting the tasks?

    There is a sort order on the activity applet based upon the priority field. As 1 comes before 2 and 3, it would be sorted to the top.

  • My iMac 27'', which I bought two Months ago, has ghost images on it's screen. Apple don't want to replace it. What can I do now?

    Hey!
    Two months ago I bought the new, thin iMac 27'' with Fusion Drive.
    Well, one week ago I recognized that I have ghost images on my screen.
    Apple don't want to replace it. They want that I drive to the next 200km away
    Apple Store (with this huge iMac) to show an Apple Employee the production error.
    The problem is that it is an iMac with special features and I need to wait 5-6  business days.
    After that I need to go back to this Apple Store (they won't send it) to bring it home.
    AND: THEY DONT WANT TO OFFER AN REPLACEMENT DEVICE!!
    I need this mac for working!!! I use it for my business and I have not the time for it!
    Is there a solution for this problem? Has anyone of you a similar problem?
    I mean: this is not accomodating!! Other companys have a better support for this case!!
    Thank you very, very much in advance!!!!!!!
    Sincerey Yours
    Max

    Image persistance on Apple displays:
    http://support.apple.com/kb/HT5455
    Apple say this about LCD screen burn in:
    http://support.apple.com/kb/HT2807
    which includes suggestions for curing that effect.
    Alternatively:
    How to fix screen burn and/or stuck pixels on an LCD monitor:
    JScreenFix
    http://www.jscreenfix.com/basic.php

  • While using firefox it is frezing and utilizing 120124 k of memory which is the highest in my task bar?

    Firefox version 3.6.16
    Windows XP SP3 OS.
    Intel Pentium 2.20 GHZ (@CPUs)
    1 GB RAM.

    I have the same problem in Windows 8 with newest, fresh and clear installed Firefox build. It's also for pages like facebook and so on, many pages you visited before. It's a problem with the cache. If you delete them, all is working fine for a short while.
    The problem is thats this will happen nearly every day again, so its realy annoying.
    In my constellations, its an Samsung Ultrabook with SSD drive and Windows Standby is used so, could it be that the cache ore firefox could get damaged while using powersaving mode if you simple open/close the Ultrabook?
    I used Firefox/Windows 8 on my desktop without any problems but i will build in my new ssd tomorrow, so we will see if i get also problems like that by using energysaving modes (its only a speculation, it could also be another Bug in Firefox).

  • Which DVD to iPod Method (for windows) has the highest quality?

    Hi everyone! This is the first thread I have started! *pats himself on back*...
    ...O.K. down to buisness...
    Does anyone know or tested which dvd to ipod conversion method is best? I have looked at most of the threads here about the conversion methods, and I was wondering which had the highest quality picture, quickest conversion time, and taks up the least memory. Feel free to post your opinions, but I feel tested responces are more helpful. Thx for your time...

    'dvd decrypter' is phenominal. all it essentially does is takes the '.vob. file off the dvd. it takes up alot of space, but the quality is perfect. somewhere on videora.com there is a link... its free too. as for a converter, ive tryed most of them, and totally preferred videora, onyl because it converts any type of file.

  • Among the Netweaver XI and the Enterprise Portal.

    Hi,
    I am new to the Netweaver Technology and would like to know the following.
    1. Which among the both i.e. Netweaver XI and the Enterprise Portal is better in terms of fetching the job and making a bettre career in it.?
    2. Also which one is more in Demnad within and outside India ?
    Any other Information on these topics would definitely help.
    Regards,
    Deepak.

    Hi Deepak,
    I agree with Subbarao. If u have gud command on ABAP then go for XI.And if u r technically sound in JAVA then go for EP which comprises of Knowledge Management and collaboration, portal and webdynpro.Both have gud value in the market right now.
    For learning material in EP plz go through the below mentioned threads:
    Re:basic material for development of portal application in NWDS
    Beginner to Portal
    Regards
    Priya
    plz reward point if this helps

  • How can the «Jabber Priority» of iChat be set?

    Jabber lets you login at various places at the same time.
    To make sure you can control which location gets your messages, there is a system of priorities.
    Every Jabber-Client lets you set a priority — the client with the highest priority that is online will then get the message. As soon as this client logs out, the next highest ranked client takes on the duty and so forth.
    By default, iChat sends a priority of zero. This is the lowest «usable» priority for a normal client. Which means, it will be the last client to receive the message and will only be active if there is no client «superior» to iChat active.
    Unfortunately, you can't change this setting in the preferences.
    In the com.apple.iChat.Jabber.plist, you can actually see that there is a key called <priority>0</priority>. Unfortunately this key has no effect on iChat. It is simply ignored.
    Does anyone know how to set the priority for Jabber connections in iChat?
    Cheers
    Chris

    Hi,
    The only way I can see that this could be done is to use Terminal to write to the .plist
    I don't know the exact wording but this link should give you clues
    http://www.macosxhints.com/article.php?story=20050610163358263
    This writes to the iChatAgent .plist and reorders the Info from iTunes
    It is older than iChat 4 and 5 and I have not tried it on there as the Apple AppleScript is now included in iChat.
    Here is another on changing the default time until you show as idle
    http://www.macosxhints.com/article.php?story=200402181751007&query=Defaultswriteichat
    So it will start with ( A first vague stab)
    defaults write com.apple.iChat Then a bit about the Jabber.plist followed by the heading just above the Key you list if there is one that distinguishes from the &lt:Priority> part.
    7:38 PM Friday; January 29, 2010

  • Need to know how to check the outbound queue in SAP for data flow into CRM

    Hi Specialist's,
    I have changed an entry in Customer Master Data in Sap r/3 and this change has come fine to CRM system.I checked the inbound BDOC in CRM ( Trn:SMW01) and it has come fine into CRM system.I am also able to see the affected field in CRM with new value.
    I need to know how to check this from SAP side i.e. I have checked the outbound IDOC list (WE02) but could not find the record.
    Is there any other way in SAP that i can check?
    Also please let me know if there is any other way except IDOC in SAP to send data from R/3 to CRM?
    Usefull answers will definitely be rewarded with points .
    Thanks,
    Abhinav.

    Hi Abhinav,
    There are no IDOCs generated in R/3 for replication. R/3 system calls BAPI and Function modules remotely on CRM system which are part of the Adaptors provided for middleware.
    Try to deregister the outbound queues in R/3 (Transaction SMQS) and see if you get an entry in the Outbound Queue (Transaction SMQ1). I have not tried this.
    If you don't get any entry in the outbound queue then definitely there would be some FM at R/3 end which would be calling CRM system remotely.
    <b>Reward points if it helps.</b>
    Regards,
    Amit Mishra

  • Which of the two stores data permanently

    pls could someone tell me
    which of the two stores data permanently in a stand alone application
    Collections or use of JDBC

    The JDBC is better, you can have persistent Collections e.g. Berkerley DB but using a Database is more flexible and manageable.
    BTW: The berkerley DB has higher performance.

  • Which of the two monitors do you recommend for Adobe Photoshop Lightroom 5:  EIZO CG 277 Coloredge o

    HI,
    Which of the two monitors do you recommend for Adobe Photoshop Lightroom 5:
    EIZO CG 277 Coloredge or NEC PA-272W.
    Thanks in advance for your reply.

    It depends on where you are. Things are very different in Europe (Italy?) compared to the US situation.
    The price difference between comparable NEC/Eizo models in Europe actually goes in Eizo's favor. The regular NEC PA272 in Europe cannot be hardware calibrated (it has a firmware lock) and the comparable offering would be either the NEC Spectraview 272 or the Spectraview Reference 272. These are more expensive than the Eizo CG277.
    Note that the European PA272 can be hardware calibrated with the US Spectraview II software - but that software cannot be bought in Europe and has to be imported from the US.
    All these displays are top reference quality. As for calibration software, which is a very important part in the equation, my vote goes to Eizo's ColorNavigator (I have a CG246). It is a superb piece of well thought-out software. The US Spectraview II - which I also happen to have - is a very, very close second, but the European Spectraview Profiler software that you get with the EU NEC units isn't all that impressive.
    Photoshop supports a 10 bit display pipeline, with either display, as long as you have a video card that also supports it. Lightroom doesn't support it.

  • Using Windows 7 and LR 5  when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword.  Why does the Library Filter showi

    Using Windows 7 and LR 5,  when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword.  Why does the Library Filter showing pictures that do not match the query

    Dan,
    Here's what's going on in the catalog you sent me, "Joel & Caitlin's Wedding".  There is the keyword "gwenn", which is explicitly assigned to 7 pics. But keyword "schwartz" has a number of synonyms, including "gwenn", and it is assigned to 25 pics.  There is no overlap between the two sets of pics. 
    I discovered these two occurrences by doing Metadata > Export Keywords, opening the exported file in an editor, and then searching for "gwenn".  I found two occurrences of "gwenn":
    gwenn
    schwartz
        {gwenn}
    From this, you can see that the keyword "schwartz" has 9 synonyms, of which "gwenn" is one.
    The filter criterion "Keywords Contain gwenn" will match the 7 pics that are explicitly assigned the keyword "gwenn", and it will also match the 25 pics assigned the keyword "schwartz", because that keyword has a synonym "gwenn".
    This illustrates the behavior I mentioned above: The criterion "Keywords contains x" will match against any of a pic's assigned keywords, any of those keywords' ancestor keywords, and any of the synonyms of the assigned keywords and their ancestors.
    So LR is operating correctly here, if not in a way that's easy to understand. 
    It appears that you are using the synonyms of "schwartz" to represent individual members of the Schwartz family.  A better way of representing family relationships is to have a parent keyword "Schwartz", with subkeywords for each family member, e.g. "Gwenn Schwartz", "Joe Schwartz", "Jane Schwartz", etc.  Repeating the family name in the subkeywords has a couple of advantages. LR usually only displays the "leaf" name of a keyword, so instead of showing you just "Joe", it will show you "Joe Schwartz", helpful when there are a number of different people whose first name is "Joe".  Also, if you ever export your pics to other software, it may not understand the LR hierarchy and won't show the parent keywords, so again it's more informative to see a keyword named "Joe Schwartz" rather than "Joe".

  • [solved] question about two soundcards which use the same module

    Hi
    I have two external soundcards, an Edirol UA-25 and a MAudio Transit. Both use the snd_usb_audio kernel driver. When I only had the MAudio, I configured it to be soundcard number 2 with the following in /etc/modprobe/modprobe.conf
    options snd-usb-audio index=2
    Now I'd like to have one be soundcard number 2 and the other one soundcard number 3. The internal soundcard is number 0, my tv card is number 1, I don't want to change that.
    How can I do this?
    Last edited by Army (2011-08-26 16:31:10)

    Ok, works. For documention, here's what I did:
    If you have two (or more) soundcards, which use the same kernel module, this is what you need in your modprobe.conf (or call this file just like you want, it only has to be in /etc/modprobe.d and has to be called *.conf)
    options snd-usb-audio index=2,3 vid=0x0582,0x0763 pid=0x0074,0x2006
    This is what I have now. Index is the number of the card, e.g. you see those numbers in alsamixer when you press F6. The vids and pids you can get with
    lsusb -v|grep idVendor # this is for the idv
    lsusb -v|grep idProduct # this is for the idp
    Just pick the line which stands for the soundcard, put these ids into the *.conf file and you're done. Now it doesn't matter in which order you plugin the soundcards, they get the right index.
    Quite easy after all

  • District data missing in the Outbound Queue of CRM

    Hi,
    We have an issue with the information not flowing to the Outbound Queue of CRM.
    For eg . When we change the District information for a BP and synchroniye the system, the information is flowing in the Inbound queue to the CRM system and we are able to find the District data in the Bdoc. But when we check the Bdoc in the Outbound queue of CRM for this site, this District information is missing over there.
    Any pointers on this would be of great help.
    Regards,
    Rasmi.

    Hi Rashmi
    Which BDoc did you check -  the MBDoc or the SBDoc?
    I guess the first thing to do would be to see if the information is correctly updated in the CDB.
    If the district is missing in the CDB entry then the problem is with the synchronisation between BUT000 and SMOKNA1
    You may have already checked this but I just thought I would ask
    James

Maybe you are looking for