Which Apple servers are used for authentification?

Hello.
I use iPad in corporate network via WiFi.
Network is secured by gateway, which stands as a proxy for any inside/outside traffic.
I have an issue - while using AppStore on iPad, after pressing Install button on any application, I got error message:
'Couldn't connect to Store. Unable to setup secure connection to server. Check time settings' (the message is in Russian, so it's not 100% accurate translation).
The issue is solved very easy - if I would press Install while I'm on GSM network internet (3G), app is starting to download. Then I presson app to pause, turn on WiFi and press app to continue - voila, it's downloaded with no problems. So the issuer is narrowed only to failed authentification via gateway, because downloading itself is going OK.
Admins have to add iTunes servers to white list in order to provide working authentification, but couldn't finf exact list of what Apple servers' IP / domain names to add. Does anybody have this info?

Hi,
For general ledger :
http://help.sap.com/saphelp_nw70/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
This is the best how-to guide on AP,AR,GL and TAX.
http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
Hope it helps.
Regards,
Srikanth.

Similar Messages

Which extraction methods are used for extracting AR , AP, GL , cost centre

which extraction methods are used for extracting AR , AP, GL, cost centre account   data from R/3 system.
please let me know what type of extraction we use...generic or FISL.... OR COPA
ON WHAT SCENARIOS WE USE THIS EXTRACTIONS..
if any have documents on it please email...please send an email    documents ..
to [email protected]
iam bit confused with sap help...
will reward full points
please reply

Hi,
For general ledger :
http://help.sap.com/saphelp_nw70/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
This is the best how-to guide on AP,AR,GL and TAX.
http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
Hope it helps.
Regards,
Srikanth.

Which java applets are used for..........................

hi,
i want to ask that which java applets are used for receving sms on website.?????????????????????????
or how can we receive sms on website by using which java applets? or tell me any other method for doing this task.
thanx in advanced

Hi,
For general ledger :
http://help.sap.com/saphelp_nw70/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
This is the best how-to guide on AP,AR,GL and TAX.
http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
Hope it helps.
Regards,
Srikanth.

Which legacy systems are used for what purpose?

Hi gurus,
I tried looking in this forums, but couldnt gather much information on which legacy systems are used and for what purpose? can any body send me a link that can help me understand when and where, which systems are used for what purpose.. I have a general understanding of Legacy systems so i am not looking for terminology explanation, i would appreciate any thing that is related to business and explains the purpose.
thanks,
kishore karnati

Hi,
Term legacy system means tailor made system by group of software developer or any branded software which deals with the group requirement like tally we user for finance.
Legacy system can be based on any technology like visual basis as front end and oracle as back end or Developer 2k as front end and oracle as back end. For report most of the legacy system we have seen uses crystal report.
You can develop and implement based on the requirement from the user though you need to define some specify process to keep the system streamline which is in your hands.
Concept like devlopment/quality/production we don't have that verys strict concept.
More and more they are not intergrated each other functionally mean lets say inventory has come to the godown then your vendor outstanding should increase in finance which does not happens you need to key in the seperate value for it.
Hope this helps!!!

Which APPLE ID to use for setting up iCloud? ETC.

Hello,
I have upgraded my iMac to the latest operating system (OS X LION version 10.7.4). iTunes is the lastest version. I still have iPhoto '08 version 7.1.5. I reckon I have to download the recommended version (iPhoto '11 version 9.2 or later). CAN I DO THIS AFTER MOVING to iCloud?
I have had a MOBILEME account for many years. And they have been sending me e-mails to that account prompting me to upgrade in order to KEEP my Mobileme account. As I mentioned above, I have pretty much upgraded everything except for iPhoto.
Recently, I bought an iPad2. When I bought it, the technician helped me to get it set up and running. I did not have an iTunes account yet. I didn't realize that the Mobileme account could be used as an APPLE ID. SO, at that time, he set up my ipad2 using another e-mail address that I have. Hence that is being used for the APP STORE and the iTUNES store.
HOW do I coordinate these 2 different e-mail addresses now, i.e. APPLE IDS, per se??? I want to keep that Mobileme e-mail account. So should I respond to the MOVE TO iCLOUD e-mails being sent to that account and use that as an APPLE ID. And if I do that, what happens to the APPLE ID being used to access my itunes/App store accounts....... YIKES....... I reckon I am not the only person out there with this dilemma.
Or maybe I am just making it way too difficult. Please advise how to bring this all together to utilize this wonderful new service called iCloud!!!!

To begin with, I would like to try to explain Apple's confusing nomenclature in regard to iCloud.
Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud.
You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photosstream, it does not affect any of your iTunes services.
To avoid confusion when discussing your problem, when I mention iCloud, I am referring to the services under the iCloud login, Whereas I will refer to the whole cloud thing as The Cloud.
If you have made purchases under the current ID that you use for your iTunes account, you will need to continue to use that, otherwise you will lose those purchases. You can then choose whether to use that ID or migrate your MobileMe ID to use with your iCloud account.

Which ports / protocoll are used for pruning the printers from AD on the printserver

Dear all
Does anyone know, which ports or protocols are used between DomainController and Printserver to prune the printer-queue's?
Regards
Michael

Print Spooler The Print Spooler system service manages all local and network print queues and controls all print jobs. The print spooler is the center of the Windows printing subsystem and controls all printing jobs. It manages the print queues on the system
and communicates with printer drivers and input/output (I/O) components, for example, the USB port and the TCP/IP protocol suite.
System Service Name Spooler
Application protocol Protocol Port
NetBIOS Session Service TCP 139
SMB TCP 445
http://support.microsoft.com/kb/832017/en-us

Our family has multiple apple ids and we are setting up a new apple tv. Does it matter which apple id we use if we have home sharing enabled?

I have an apple id from my mobile me account; I also have the apple id from my itunes account (with which I purchase content for my powerbook); and my husband has an apple id for itunes which he purchases content for his itunes library on his PC.
Does it matter which apple id we use to set up our new apple tv?
what issues are caused by my multiple apple ids?

You cannot merge apple ids, but you can sign out of the apple id and sign in under the other one either on your phone or your mac. On your phone, go to settings, itunes and appstore, tap your apple id, tap sign out, then go back to home screen, then back into itunes an appstore and sign in with the apple id you want to use.

Following a software update, I can no longer access/authorise music purchased via iTunes from my old Apple ID, which I have not used for 8 years, and no longer have password. Any ideas how I can re-access/recover that music?

Following a software update, I can no longer access/authorise music purchased via iTunes from my old Apple ID, which I have not used for 8 years, and no longer have password. Any ideas how I can re-access/recover that music?

Apple ID FAQs > http://support.apple.com/kb/HT5622

I can't log in the App store because an from Zambia which is not listed in Apple outlets. How do i go around this as apple products are using globally and not only in the listed countries. My product is a Mac book pro.

I can't log in the App store because am from Zambia which is not listed in Apple outlets. How do i go around this as apple products are used globally and not only in the listed countries. My product is a Mac book pro. i feel this limits how i can use my product

Unfortunately you have taken an Apple product outside of the area where Apple currently does business. There isn't legally a way around this. Apple cannot license apps to you where you currently live.

Which tables are used for Quality Efficiency calculation of OEE report ?

Hello,
We're confirming OEE report behavior.
I'd like to know OEE report and ME table specification.
Which tables are used for Quality Efficiency calculation of OEE report ?
According to I know, the definition of Quality Efficiency is (complete qty) / (start qty).
For this calculation, does OEE report just use qty_started and qty_completed of PRODUCTION_LOG table?
If any other tables/columns/logic are implemented, your information is appreciated.
Best Regards,
Takahiro Uesugi

hi
Go to BSIS & BSAS
BKPF
SKA1
SKAT
SKB1
Regards
Roobal

Received a email from Apple stating that my Apple ID was used for a purchase not on my device. It had a link to cancel purchase but asked for my email and password which I gave then it wanted my credit card info! I didn't give that,what should I do?

Received a email from Apple stating that my Apple ID was used for a purchase not on my device. It had a link to cancel purchase but asked for my email and password which I gave then it wanted my credit card info! I didn't give that,what should I do? Do you think this is just a way to get my credit card information?

It sounds like a phishing email. You can't "cancel" purchases. You've now given them your AppleID and password, so you should immediately change your password to something new and very secure.
Also watch out for suspicicious activity on your account.

I am persuing M Tech in Cad cam and I wish to do job in core area only , then which SAP module is useful for me as a fresher?

I am persuing M Tech in Cad cam and I wish to do job in core area only , then which SAP module is useful for me as a fresher?
<<Moderator: Multiple postings are not allowed>>
Message was edited by: Ravi Sankar Venna

Hi Nishant,
Welcome to SCN.
Questions like these have been asked many times in these forums. I suggest you search for relevant information and if you are not satisfied, then post a specific question.
Also, spend some time reading the The SCN Rules of Engagement
pk

Which are the infotype we are using for payroll

Hello , everybody
which are the infotype we are using for payroll , time managemnt

Hi,
For payroll:
0008, 0009, 0011, 0014, 0015, 0045, 0057, 0167, 0169, 0207, 0208, 0267, 0416.
For time management:
0007, 2001, 2002, 2006, 2007, 2010, 2013.
For Indian payroll:
Additional infotypes are from 0580 to 0589.
Edited by: Velangini Showry Maria Kumar Bandanadham on May 14, 2008 5:39 PM

How to set up set which NIC card to use for multicast?..

 I just downloaded Rolling Patch 1 for WLS6.0SP2.
 While reading the README file it says
 " ISSUE 42518: Provided a way to set which NIC card to use for multicast traffic
 Can anyone tell me how to set this?. on my WebApplication server it has two NIC
 cards and I want to use the NICcard which is being used to talk to internal network
 for multicast messages.
 One more thing,
 Can anyone one tell how to search for bugs (ISSUES) in weblogic. I am looking
 place where I enter ISSUE number and should get the detailed description of bug/issue
 etc..
 Thanks for helping,
 Nilesh


 Thanks Kumar, I'll try this.
 Does this -Dweblogic.interfaceAddress used only for multicast. Or this is also
 used to talk to AdminServer?.
 The other problem I am facing is when I restart the AdminServer in recovery mode
 it's not finding my WebApp servers, because my webapp servers are on public network
 and my admin (management) server is on private network.
 please look at http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.management&item=1217&utag=
 , for more details about my problem.
 Thanks,
 Nilesh
 Kumar Allamraju <[email protected]> wrote:
 ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
 ><html>
 >You should be able to do it via console in 6.1
 > Not sure if it was added in 6.0
 >For 6.0 you can set this via command line
 > java -Dweblogic.interfaceAddress=<addr>
 >You need 6.0 SP2 RP1
 >--
 > Kumar
 >Nilesh Shah wrote:
 ><blockquote TYPE=CITE>I just downloaded Rolling Patch 1 for WLS6.0SP2.
 > While reading the README file it says
 > " ISSUE 42518: Provided a way to set which NIC card to use for multicast
 >traffic
 > "..
 >Can anyone tell me how to set this?. on my WebApplication server it
 >has two NIC
 > cards and I want to use the NICcard which is being used to talk to
 >internal network
 > for multicast messages.
 >One more thing,
 >Can anyone one tell how to search for bugs (ISSUES) in weblogic. I
 >am
 >looking
 > place where I enter ISSUE number and should get the detailed description
 >of bug/issue
 > etc..
 >Thanks for helping,
 >Nilesh</blockquote>
 ></html>
 >

Which tool do you use for load testing?

Which tool do you use for load testing for J2EE application?

hi,
i use jmeter for without issues..
first make sure that the system from where you are doing load testing is in the same lan(without firewall) to that of server. Here you are testing the capacity of server and not the network bandwith.
So assuming very good network connection what is the servers performance level...
If u have to decide which tool is decent enough to load testing,
i would suggest go for jmeter. its reliable and i have used it without problems.
Here is my quick tutorial for jemeter which i made for my teams reference.
REFERENCE
     For Getting Started refer to any tutorial for Jmeter
     You can refer to introduction on
          http://jakarta.apache.org/jmeter/usermanual/
RUNNING LOAD TEST
     Extract jakarta-jmeter-2.3RC4.zip in c:
     install jdk-1_5_0_12-windows-i586-p.exe
     Run C:\jakarta-jmeter-2.3RC4\bin\jmeter.bat
     In Test Plan add Thread Group
     Right Click Thread Group -> Add->Sampler->HTTP Request
     Select HTTP Request added fill details
          Serverip:www.xyz.com
          Port:80
          Path:/xyz-webapp/index.jsp
          Use KeepAlive: Checked
          Retrive All Embeded images from HTML: Checked(For geting images inside html)
     Right Click Thread Group -> Add->Listner->Graph Results
     Click on Thread Group Fill details
          No of Threads:3(This means no of simultaneous users)
          Ramp Up Period:1(3 Request will be made in 1 second period)
          Loop Count:5(Above process should be repeated how many times)
     Save TestPlan
     Run -> Clear All
     Run -> Start
          Click on Graph Results for Output
     Try adding different listener in Thread Group
          Thread Group -> Add->Listner->Summary Report
     Listeners coud be added at thread group level or HTTP Request Level
RECORDING A TEST.
     Add a HTTP proxy server in workbench by right clicking on it and selecting Add->Non test Element->HTTP Proxy Server.
     In Test Plan Add Thread Group
     In HTTP proxy server select Target Controller as Test Plan > Thread Group.
     Go to Internet Explorer and go to internet settings and set proxy server as localhost and the port
          which is configured in Jmeter proxy server.Save Settings.
     In Jeter proxy server start by Clicking on Start button in the HTTP Proxy Server Flap.
     In browser navigate the application which you want to test.
     The nodes will be added in the Thread Group.
     Once Navigation is done stop the proxy server and save the test plan from file menu.
LOGGING INTO APPLICATION.
     When we have to login into system and then navigate the system
          we need a cookie to be tracked after login. This could be achieved
          simply by Add -> Config Element -> HTTP Cooie Manager.
     After adding the HTTP Cooie Manager simply run the test.
LOOPING COUNTER.
     When a request is made multiple parameter is sent to server.
     Parameters are sent from the HTTP Request node added in the Thread Group
          in "Send Parameter with the request" table.
     If we run the loop count 10 times the parameters will be sent same in every request.
     If you have to send parameters like user1,user2,user3,user4....
          then add -> Pre processor -> Counter.
     Put start as 1 and and Maximum as 10 or whatever required.
     Put Referene name as iCtr or whatever.
     In the "Send Parameter with the request" in value column put user${iCtr}

Which Apple servers are used for authentification?

Similar Messages

Maybe you are looking for