Which application area does the SHOP VISIT NOTIFICATION cover under..

which application area does the SHOP VISIT NOTIFICATION cover under..
if possible pass me some useful information reg this SVN.
i require this information very urgent...

Ok, I think I'm on the right track now. I was finally able to inspect the HTTP requests coming in to my destination page, and I do see the notification post coming in, with the expected form data. Here's a sample of the HTTP request that came in after submitting a new quote on my site, in case anyone's interested.
JSON:
{"connection":"keep-alive", "content-length":"32", "content-type":"application/x-www-form-urlencoded", "host":"notification.azurewebsites.net", "max-forwards":"10", "x-liveupgrade":"1", "x-original-url":"/", "x-forwarded-for":"192.150.2.7:17242", "x-arr-log-id":"ae52537a-df3b-4bc5-a386-f652c9a03ef2"}
{ ObjectID: '4448953', ObjectType: '2008' }

Similar Messages

How can I find which applications are using the most power?

I have recently noticed a full charge of power doesn't last as long as it used to on my iPad 2. Is there some way to determine which applications are using the most power?
I have been monitoring my home network router accesses and have noticed the iPad logs accesses every 15 seconds. This only happened recently. It had been well behaved and only accessing once or twice a day before. I installed the most recent iTunes upgrade, per suggestions during a Sync. The problems seemed to occur after this update. I have gone through all the settings and have minimized the applications requiring higher power (I switch off the location services unless I'm away from home. Likewise, I turn off my cellular carrier unless I'm away from home, etc.)
In short, how can I maximize my power usage (aside from turning it off)?
Thanks.
Dave

Thanks for responding so quickly.
I'm really trying to find out why the battery is depleting much faster than it used to all of a sudden. I used to be able to put a full charge on it and it would last about 5 to 6 days with normal use (normal for me). Now that battery only lasts about 2 to 3 days with the same use.
I DO recharge it when it needs to be charged but this is indicating there is something else (new) that is causing the power drain.

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

To see what reports are running, take a look at the execution log views that are available in the database. Which views that are available are dependent on your version of SSRS.
http://technet.microsoft.com/en-us/library/ms159110.aspx
To see which application is using SSRS is a little more difficult. You can turn HTTP logging on, which will give you an idea of where connections are coming from, so you can see IP addresses. You can also look at the execution log view to see
user accounts. So, depending on your environment and use of service accounts, this could be easy, or difficult.
http://technet.microsoft.com/en-us/library/bb630443.aspx
If all else fails you can look for clues in the SSRS logs. Good luck...

HELP!!! Message - (One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) How do I get this to stop?

I bought a new Sony Vaio Laptop running Windows 8, 64bit, i7 processor. Everytime I open iTunes and then close out, the following message occurs: (i-tunes message - One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) Then it starts counting down from 20 seconds unless I just click on the (Quit) button. How do I get this to stop? Please be specific, I am challenged when it comes down to computers.
Thank You

This was extremely annoying for me, also. I started uninstalling unneeded Sony applications to try to narrow down the problem. It turned out not to be a Sony application... it is some functionality built into the bluetooth driver software package by Broadcom. Uninstalling the bluetooth package (via the control panel) takes care of the problem. Itunes also boots up way quicker. But uninstalling it will remove features related to bluetooth and nfc. For me, that isn't an issue, since I don't use them. Since you said you're "computer challenged" I would probably just send an email to sony complaining about the problem. They'll get in touch with Broadcom eventually (the manufacture of the drivers) and get the problem fixed.
Side note: the Broadcom package is huge... nearly 1GB in size. Which is crazy. I can't imagine what it does considering the size of it. Entire operating systems can take up less storage. Also, I have no idea how it starts an itunes plugin without placing it into the standard plugin directories.

How can I tell which application is requesting the...

Hi
I have an annoying message poping up and asking me to choose a connection type. Is there any way to find out WHICH application is doing that?
5800
Solved!
Go to Solution.

The usual suspects are e-mail apps, facebook, apps that need to updated on a regular basis.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Why does the first iCal notification disappear as soon as I open the Apple cover so I can't read it?

Why does the first iCal notification disappear as soon as I open the Apple cover? It disappears so quickly that I cannot read it!

Right now (and for quite some time!) the community pages are a real PITA. Trying to link the two did not bring the nice behavior of the Forums to the Community, but rather brought that stench over here!
https://decibel.ni.com/content/thread/11597?tstart=0
Flame on. I find the community useless.
Click on link, or revisit old address from browser.
Hey nice, I am logged in.
Click on another link.
Darn, now I am logged out.
Log In.
Now I am at the Community Home page, where the heck was I?
Actually not mad, just indifferent. I figure in a few months I'll hear that it was fixed and maybe I'll go back there.

Which SIM card does the iPad mini take? Does it have to be specific type of SIM for the iPad mini?

Which SIM card does the iPad mini take? Does it have to be specific type of SIM for the iPad mini?

Welcome to the Support Communities. The answer to your question is available in Apple's website — see the Input/Output section here:
http://www.apple.com/ipad-mini/specs/

How to find out which objects are at the end of the datafiles

My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.

>
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.
>
You may want to copy this and add it to your toolkit
See 'What's at the End of the File?' in this Tom Kyte article from the Sept 2004 Oracle Magazine
http://www.oracle.com/technetwork/issue-archive/o54asktom-086284.html
And this AskTom blog shows you how to generate a script containing ALTER statements toresize your datafiles to the smallest possible. You can 'pick and choose' from the ALTER statements to do what you want.
Then of course, you can use techniques from this article by Oracle ACE, and noted author, Jonathan Lewis
http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/

In which table are stored the data of a set created by GS01?

Hi All,
could anyone tell me in which table are stored the data of a set created by GS01?
Thanks

Hi,
It's stored in SETHEADER, SETNODE and SETLEAF tables.
Regards,
Eli

*When we are doing the cross company code transaction it is hitting

Hi Experts,
Her my client having one requirment as follows,
When we are doing the cross company code transaction it is hitting the wrong Gl (i.e 109999999-suspense clearing a/c)
It should hit either (135060016-tie up control a/c or 241060001-tilaknagar industries ltd control ac) What can i do?
Regards,
Devendra
Edited by: Devendraachari on Jun 30, 2010 12:07 PM
Moderator: Give proper titles to your threads

hI,
check what is the gl account maintained for cross company code transactions. T.code may be OBA1
What transactions you are doing ex: Asset transfer, vendor postings .. ..
Regards,
Sankar
Edited by: Durgasankar.Innamuri on Jun 30, 2010 12:09 PM

How can I know which photos are in the library was used in each album I have created before.

How can I know which photos are in the library was used in each album I have created before?
I have many photos in the library folder of iPhoto, but actually I don't know which photos were used in my album.
Is there any method to find this?
Thanks.

Album or Book?
If Album you can find the ones not already used:
File -> New Smart Album
Album -> is not -> Any
Regards
TD

What does the open file dialog do 'under the hood' and is there a way to simulate it

What does the open file dialog do 'under the hood' and is there a way to simulate it?
I have a bug in my code (that I've posted about before, here) which I can't fix at the moment, but I do have a workaround.
Briefly, the bug:
I call a dll from a function node, to initialise and run a spectrometer. If I start up the PC, LabVIEW and run my vi the code runs without complaint, the first call to the dll to initialise the spectrometer doesn;t return an error but the spectrometer is not detected either.
I've tried various solutions, see the link above, and none work
The workaround:
If, at any time before running the code containing the function node I open an 'open file' dialog window, select the dll and click ok/hit enter then everything is fine. When I run the main code the spectrometer is detected.
I use an express vi to open the file dialog, I specify the start path and file name as constant inputs and just click ok/hit return when the dialog pops up. I don't do anything with the dialog outputs. In fact the vi that contains the open file dialog can be run before the project containing the bug is even open.
I have to do this everytime I turn the PC on.
So, either
1) Can somewone suggest a fix for the original bug?
2) What is the easiest way to simulate the enter keypress when the open file dialog pops up
or
3) Can someone tell me what the open file dialog does under the hood that somehow causes the dll to work and can it be simulated in straight LabVIEW
I suspect that the dll itself is dodgy ( I have in the past talked to the supplier but not got very far, and I will try again but I would like a quick, temporary solution too). I'm guessing that the file dialog is making some kind of check on the file, and possibly registering its presence with the OS (winXP). I tried using the file/folder exists vi to see if checking the file like that worked but no luck.
Any help greatly appreciated.
Dave

Hi David
I am very conscious about thread hijacking but this sounded like my issue so I hope you dont mind me asking about your issue. I am hoping that you have a spectrometer from the same vendor as me and its not just me seeing an Error 1097 issue. My spectrometer is from a company called Stellarnet.
So far I have unable to get it to work with other VIs. There is one condition where I can get it to work but its no good for me.
Case 1
I open the VI in a fresh labview environment with no other VIs in memory. The code runs with no issue.
Case 2
Labview is not opened. I double click the spectrometer VI in windows explorer. The VI opens but it fails to run resulting in Error 1097. Personally, I dont see the difference between this and Case 1 above and yet it fails.
Case 3
If I already have other VI's in memory and try to load the spectrometer VI and run it fails with Error 1097. This case is the one that most important to me. I have a test executive that will load test VIs dynamically and I can't get this to work. Same problem Error 1097.
I wanted to share what I have seen with you and to let you know that maybe somebody else has the same issue. I am convinced its the DLL but the vendor dis-agreed saying it was LabVIEW. I couldn't convince him otherwise.
Thanks in advance
David

HT3302 Does the extended apple care cover water damage to the iphone?

Does the extended apple care cover water damage to the iphone?

If you have AppleCare+, Apple will replace the iPhone for the "deductable", which in the US is $49. If you have the standard AppleCare plan, then accidental damage is not covered and you will have to pay Apple's out-of-warranty price for replacement. See:
http://www.apple.com/support/iphone/service/faq/
Regards.

Does the iPad 3 smart cover fit the iPad Air?

does the iPad 3 smart cover fit the iPad Air?

No - if you look at the specs, the sizes of the two devices is quite different.
http://www.apple.com/ipad/compare/ (the iPad 3 and 4 are near identical in size to the iPad 2 dimensions).

Does the 1 year warranty cover a crack between the front and back casing?

Does the 1 year warranty cover a crack between the front and back casing?

No, I don't think so if it's through mishandling.

Which application area does the SHOP VISIT NOTIFICATION cover under..

Similar Messages

Maybe you are looking for