Which application do I use to convert my LP's directly into my IPad, I have the Ion Profile Pro, and I lost the manual which specified the application you should use. Thanks
Please answer.
Directly to the iPad, you likley can't since it is a USB device.
http://www.ionaudio.com/products/details/profile-pro
Similar Messages
-
I backed up my entire photo collection to a flashdrive.. After they downloaded, all my photo's got grouped together, and I lost all my individule events and titles of pictures.. Is there a way to get back my groups and titles? Thanks
To back up everything you must backup everything - ie back up the entire iPhoto library as a single entity
And it must be on a volume formatted Mac OS extended (journaled). Flash drives typically are not. They usually are a FAT format which will not work
Exactly how did you do the backup and what format is your flash drive
LN -
I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
<B>DESCRIPTIONS</B>:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
<B>INSTRUCTIONS</B>:
1. Run the VI.
2. On the <B>DAQ Configurations</B> tab, specify the <B>sample rate</B>, <B>samples per channel</B>, device and channel configurations, and tachometer channel information.
<B>NOTE</B>: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to <B>Extract Even Angle Reference</B> tab. Specify the <B>number of samples to acquire</B> and the <B># of revs in reference</B> which determines the number of samples in even angle reference. Click <B>Start</B> to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in <B>Even Angle Reference</B>.
4. Switch to the <B>Remove Slow-roll Errors</B> tab. Click <B>Start</B> to acquire data continuously and view the compensate results. Click <B>Stop</B> in this tab to stop the acquisition.
<B>ORDER ANALYSIS VIs USED IN THIS EXAMPLE</B>:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva -
I have a new MacBook Pro and used the tool to transfer information from my HP Computer to the MAC during set up. THe size of the disk space used on the HP was about 200GB. Now I have 400GB used on the MAC. I have added up all the folders and applications etc. and they total only about 110GB. On the summary the "other " category shows over 300 GB. What could it be. I would like to recover the space.
Check out : The Storage Display
http://support.apple.com/kb/HT1408 How to transfer data from a PC to a Macintosh
===============
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked. Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems. -
After closing Firefox to use IE8 or any other program (like InterVideo to watch a DVD), everything is very choppy and slow. I have to go into Taskbar, Processes, and close firefox.exe manually (which is using up all the memory/CPU and should have closed before). Then, and only then, does everything behave normally. What is going on and what am I doing wrong or missing??
== This happened ==
Every time Firefox opened
== about a couple months ago and happens every time I close Firefox.<u>'''Kill Application'''</u>
In Task Manager, does firefox.exe show in the <u>'''Processes'''</u> tab?
See: '''[http://kb.mozillazine.org/Kill_application Kill Application]'''
'''<u>Causes and solutions for Firefox hanging at exit:</u>'''
'''[[Firefox hangs]]'''
'''[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit (Mozillazine article)]'''
'''[[Firefox is already running but is not responding]]'''
<u>'''Safe Mode'''</u>
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox SafeMode is a diagnostic mode that disables extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes before starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. You have to close and restart Firefox after each change via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
<u>'''''Other Issues''''': to correct security/stability issues</u>
<u>'''Update Java'''</u>: your ver. 1.6.0.19; current ver. 1.6.0.20 (<u>important security update 04-15-2010</u>)
''(Windows users: Do the manual update; very easy.)''
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed. -
I have a new MAcBook Air and my photos don't fit on the internal hard drive. I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto. How do I set an external hard drive as the default drive in Iphoto?
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD -
Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!. When I use a friends Canon camera it works every time!
Hi Keith thanks for your reply I have Lightroom 5.7.1 64 bit and my Nikon's firmware is version 1.02
-
I have an old Powerbook G4 and need to install iTunes, which version do I use?
I have an old Powerbook G4 and need to install iTunes, which version do I use? Where would I find this version?
iTunes 9.2.1 is the last version that would run on Mac OS X 10.4:
http://support.apple.com/kb/DL1056
Regards. -
I have got a 13 inch MacBook Pro and it got stuck in a loop so I switched it off by holding the power button down and now when I switch it on the apple logo appears then I get a blank slot at the bottom of the screen then the circle appears and rotates and then it switches off again, I have tried starting it again with the system disc that came with it when it was new but it makes no difference. Is there a sequence that I can use to force it to start.
Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked. -
Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).
Your system is missing a couple DLLs that LR needs, but the fix at Adobe is to copy them to the LR folder which gets replaced for each install, so you have to redo it after each LR install. It would be worth documenting the process and saving the DLLs so you don’t have to ask about it each time:
http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
You might also use the AIO210 program to add them as detailed in this YouTube video—maybe this is a more permanent fix, but since the files are from media-fire be very careful about what you do so as not to install a virus on your computer.
I’d scan the downloaded ZIP you download with whatever virus and internet security software you have and don’t be fooled by extraneous popups you might see during the download process. I was able to download the aio210.zip after authorizing one Captcha window and closed at least one bogus popup trying to get me to install other software. I also scanned the downloaded zip with two virus scanners and both said it was clean. Here is the YouTube video, where the link to the ZIP to download is in the description once you expand it:
https://www.youtube.com/watch?v=vlT0N2CX50g -
Have a mac book pro and it has some kind of virus which opens unrelated windows. What do I do?
have a mac book pro and it has some kind of virus which opens unrelated windows. What do I do?
You may have installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
In Adobe ExportPDF, can you take an existing PDF and delete existing pages? For example, I have a 5-page report and need to delete pages 2-4. Is this possible? Thanks!
Hi,
You can do this with Adobe Acrobat.
If you are using Export PDF it is a long procedure.
You need to convert your PDF in word or powerpoint.
Then you can edit the document & again can create PDF.
Regards,
Florence -
For example, say, I open this youtube page: https://www.youtube.com/watch?v=e-ORhEE9VVg
Firefox opens it and whithin 5 seconds, with no action on my part - no clicking, typing, nothing - transfers me over to:
https://r7---sn-8p85jvh-nv4e.googlevideo.com/videoplayback?mm=31&source=youtube&ratebypass=yes&dur=272.462&mt=1423341461&mv=m&ms=au&fexp=907263%2C924628%2C927622%2C930676%2C943917%2C945098%2C947225%2C948124%2C948909%2C952302%2C952605%2C952612%2C952901%2C955301%2C957201%2C959701&ip=79.100.24.238&upn=3_qYUmHqoVM&id=o-ALB3CMI8PMR7Ylk-0D_a76ghgOzcADyQvQ21B3HCYCCW&sparams=dur%2Cid%2Cinitcwndbps%2Cip%2Cipbits%2Citag%2Cmime%2Cmm%2Cms%2Cmv%2Cpl%2Cratebypass%2Crequiressl%2Csource%2Cupn%2Cexpire&initcwndbps=1272500&expire=1423363109&sver=3&pl=20&requiressl=yes&mime=video%2Fmp4&key=yt5&itag=22&ipbits=0&fallback_host=tc.v7.cache5.googlevideo.com&quality=hd720&signature=D5CA5BD786DB0F73296165DE1C2EDE972A6EAAF353.893EB11517D389BCA3436ADEE89CF0D6C2D60E2420&title=Taylor%20Swift%20-%20Blank%20Space%20%28HD%29
Which sometimes stays in the address bar over a completely blank window, (like in the case stated above) and sometimes opens a download window, with the video in mp4. It suggests I open the file with VLC.
Is this a virus or something - or is it something an add-on would be responsible for?
I have the following add-ons (in the way that they are listed on my toolbar):
Down them all
Download Helper
Flash Video Downloader (which recently got automaitically updated)
Download flash & video (forgot this add-on's name, that's what it says on the tool tip on mouse-over)
FlashGot
and GreasMonkey (but with only 2 scripts, and none of them related to videos, just IMDb fixer and Image enlarger)
I have the VLC Media Player Plug-in, could this be the reason this is happening?
I know what you're gonna say - try disabling them to see which one it is. It's complicated :) but I can't, I've got too many windows open, like 700, and shutting Firefox down or restaring it the normal way is near next to impossible sometimes :)
Another way is for me to save my session file and open a new session, and then disable add-ons one by one to see which one's to blame. It's even possible some of them are maybe incompatible with this version of Firefox.
So f someone can tell me if they're having the same problems, and maybe suggest a solution, I'd be happy to hear all about it.
Thanks in advance :)Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift ''(Mac Options)'' >''' key, and then starting Firefox. Is the problem still there?
-
I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most projectors in auditoriums that I will be using have 1024 x 1200 pixels, and possibly 1600 x 1200. There is no reference to this issue in the Keynote Tutorial supplied by Apple, and I have never found a definitive answer to this issue online (although there may be one).
Here’s my question: When scanning my photographic slides, what setting, from 72 dpi to 300 dpi, would result in the best image quality and use up the most efficient amount of space?
Here’s what two different photo slide scanning service suppliers have told me:
Supplier No. 1 tells me that they can scan slides to a size of 1544 x 1024 pixels, at 72 dpi, which will be 763 KB, and they refer to this as low resolution (a JPEG). However, I noticed when I looked at these scanned slides, the size of the slides varied, with a maximum of 1.8 MB. This supplier says that the dpi doesn’t matter when it comes to the quality of the final digital image, that it is the dimensions that matter. They say that if they scanned a slide to a higher resolution (2048 x 3072), they would still scan it at 72 dpi.
Supplier No. 2: They tell me that in order to have a high quality image made from a photographic slide (starting with a 35 mm slide, in all cases), I need to have a “1280 pixel dimension slide, a JPEG, at 300 dpi, that is 8 MB per image.” However, this supplier also offers, on its list of services, a “Standard Resolution JPEG (4MB file/image – 3088 x 2048), as well as a “High Resolution JPEG (8 MB file/image – 3088x2048).
I will be presenting my Keynotes with my MacBook Pro, and will not have a chance to try out the presentations in advance, since the lecture location is far from my home, so that is not an option.
I do not want to use up more memory than necessary on my laptop. I also want to have the best quality image.
One more question: When scanning images myself, on my own scanner, for my Keynote presentations, would I be better off scanning them as JPEGs or TIFFs? I have been told that a TIFF is better because it is less compressed.
Any enlightenment on this subject would be appreciated.
Thank you.When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works. -
Yesterday I changed my email password on my home computer. Today, I can't get any new emails on my Samsung Galaxy 4; I deleted the email account entirely and tried to set it up again as a new account, using the new password, but it keeps giving me an error message that reads: Cannot safely connect to server. The new password is working on my home computer. I even tried the old password; it just gave me the same error message.
I'm sorry you're having issues with your e-mail account on your phone Rusty1112. Let's figure out what's going on. First, please try deleting account/information again and then restart phone. When phone is back on, try adding e-mail account again, and be sure you're entering exactly as you set up, meaning its case-sensitive. If you're still getting same error, please let us know and let us know what e-mail account it is, Yahoo, AOL, MSN, etc.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
I am trying to create a PDF document using Pages '09 where whoever I sent it to can type in responses for certain things. It is like a workbook. However, I created a document with various text boxes, saved it as a pdf, and then opened it. I was unabl
-
I work at a church that records video and audio of each service and provides DVD/CD's to be available for pickup at a later date (once edited). Our current process for placing orders is a small booth with a stack of carbon-copy forms and we would jus
-
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product error on operation insert into Tab (select * from Tab@remote) ORA-01653 unable to extend table string.string by string in tablespace string Cause: Failed to allocate an extent of
-
Why oracle introduct sql_id in 10g?
Please talk about your idea? Thanks!
-
how much do i pay in indian rupee for applecare pack ( 2nd year extended warranty ) for iphone 5c