Which apps will be useful to login gtalk on iphone 4?
Hi Everyone,
Anyone have an idea that which apps is useful to login to GoogleTalk ?
Thanks in advance.
Henary
I ended up doing it manually as there was 18 apps but I still would like to know the answer to my above post.
xeni
Similar Messages
-
Which app can i use to block numbers on iphone 5 ?
I want to block the number. they are bugging me for the last 3 weeks. so far I have just given it a separate ring tone so that I know right away it is them. Is there an app that I can use for that purpose. I could not find anything that was helpful.
<Edited By Host>I Downloaded a silent ringtone and assigned it to the junk call phone numbers. I even created a contact named "Junk Calls" where I assign every annoying phone number to. At worst, my iPhone lights up when they call, but no ring happens and no vibrate. Maybe they leave voice mail, but I can deal with that on my own schedule.
It is also possible to report junk calls to the FTC, especially if your phone number is on the FTC Do Not Call list (USA residents only). -
If I need a full rman restore which backups will it use?
Hello,
I have a database 11.1.0.7 with 8TB. Block change tracking is enabled.
At the weekend I take level 0 backup and during the week level 1 cumulative.
For some weeks the level 0 backup is failing, so I only have level 1 cumulative backups taken every week day with a 4 weeks old level 0 backup.
If I need a full rman restore which backups will it use? Will it be the last level 0 backup with the last level 1 cumulative?
I ask this because grid crontrol tells me that the recent level 1 backups input size is smaller than last week level 1 backups and in between I dont have any level 0 sucessfull backups. Shouldn't the input size of level 1 cumulative increase until the next level 0 backup ?
The grid reports:
Backup Name Status Start Time Time Taken Type Output Devices Input Size Output Size Output Rate (Per Sec)
rman_df_lv1c COMPLETED 25/Jul/2011 21H00m WEST 02:33:29 DB INCR SBT_TAPE *1.32T* 289.02G 32.14M
rman_df_lv0 FAILED 23/Jul/2011 02H01m WEST DB INCR SBT_TAPE 8.78T 8.06T
rman_df_lv1c COMPLETED 21/Jul/2011 21H00m WEST 04:39:38 DB INCR SBT_TAPE *3.46T* 550.82G 33.62M
rman_df_lv1c COMPLETED 20/Jul/2011 21H00m WEST 04:47:36 DB INCR SBT_TAPE *3.37T* 524.36G 31.12M
rman_df_lv1c COMPLETED 19/Jul/2011 21H00m WEST 04:06:09 DB INCR SBT_TAPE *3.15T* 490.75G 34.03M
rman_df_lv1c COMPLETED 18/Jul/2011 21H00m WEST 03:40:24 DB INCR SBT_TAPE *2.49T* 410.88G 31.82M
rman_df_lv0 FAILED 16/Jul/2011 22H16m WEST DB INCR SBT_TAPE 6.27T 5.69T
rman_df_lv1c FAILED 14/Jul/2011 21H00m WEST 06:13:40 DB INCR SBT_TAPE 4.38T 714.30G 32.62M
rman_df_lv1c FAILED 13/Jul/2011 21H01m WEST 04:40:45 DB INCR SBT_TAPE 3.25T 542.98G 33.01M
rman_df_lv1c COMPLETED 12/Jul/2011 21H00m WEST 07:15:54 DB INCR SBT_TAPE 4.74T 847.93G 33.20M
rman_df_lv1c COMPLETED 11/Jul/2011 21H00m WEST 07:26:40 DB INCR SBT_TAPE 3.78T 766.40G 29.28M
rman_df_lv0 FAILED 9/Jul/2011 02H32m WEST 04:30:44 DB INCR SBT_TAPE 749.89G 716.02G 45.14M
rman_df_lv1c FAILED 7/Jul/2011 21H01m WEST 04:49:24 DB INCR SBT_TAPE 2.16T 515.90G 30.42M
rman_df_lv1c FAILED 6/Jul/2011 21H00m WEST 01:26:06 DB INCR SBT_TAPE 745.83G 165.48G 32.80M
rman_df_lv1c FAILED 5/Jul/2011 21H01m WEST 00:05:48 DB INCR SBT_TAPE 58.56G 7.56G 22.24M
rman_df_lv1c FAILED 4/Jul/2011 21H00m WEST 01:55:03 DB INCR SBT_TAPE 422.40G 79.55G 11.80M
rman_df_lv0 FAILED 3/Jul/2011 16H32m WEST 30:22:04 DB INCR SBT_TAPE 4.53T 4.21T 40.40M>
If I need a full rman restore which backups will it use? Will it be the last level 0 backup with the last level 1 cumulative?
From http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmvalid.htm
Validating Backups Before Restoring Them
You can run RESTORE ... VALIDATE to test whether RMAN can restore a specific file or set of files from a backup. RMAN chooses which backups to use.
The database must be mounted or open for this command. You do not have to take datafiles offline when validating the restore of datafiles, because validation of backups of the datafiles only reads the backups and does not affect the production datafiles.
When validating files on disk or tape, RMAN reads all blocks in the backup piece or image copy. RMAN also validates offsite backups. The validation is identical to a real restore operation except that RMAN does not write output files.
You can monitor what RESTORE VALIDATE does.
Make precautions, so you do not damage the production DB!!!
Iordan Iotzov
http://iiotzov.wordpress.com/ -
Which app will read the square information codes?
which app will read the square information codes?
Search the playstore for QR code reader - here are a few:
QR Code Reader - Android Apps on Google Play
QR Code Scan & Barcode Scanner - Android Apps on Google Play
QR Code Scan & Barcode Scanner - Android Apps on Google Play -
How can i know which index will be used when executing the query ?
1 ) I have query in which i have 3-4 tables but there multiple index on one column .
so how can i know which index will be used when executing the query ?
2) I have a query which ia taking too much time . how can i know which table is taking too much time ?
3) Please Provide me some document of EXplain plan ?Hi Jimmy,
Consider the below example
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
CREATE TABLE FIRST AS
SELECT * FROM all_objects;
UPDATE FIRST
SET object_name = 'TEST'
WHERE owner != 'SCOTT';
CREATE INDEX idx_first ON FIRST(object_name);
SELECT *
FROM FIRST
WHERE object_name = 'TEST';
It has not used index
Execution Plan
Plan hash value: 2265626682
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 58678 | 7334K| 163 (4)| 00:00:02 |
|* 1 | TABLE ACCESS FULL| FIRST | 58678 | 7334K| 163 (4)| 00:00:02 |
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
SELECT *
FROM FIRST
WHERE object_name = 'emp';
This has used the index
Execution Plan
Plan hash value: 1184810458
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 128 | 1 (0)| 00:00:01 |
| 1 | TABLE ACCESS BY INDEX ROWID| FIRST | 1 | 128 | 1 (0)| 00:00:01 |
|* 2 | INDEX RANGE SCAN | IDX_FIRST | 1 | | 1 (0)| 00:00:01 |
From this we can come to the conclusion that, whether to use one index or not by oracle
would also depend on the data which is present in the table. This has to be this way as
we see in the bind peeking, if oracle sticks to only one plan, say only use the full table
scan, it would be a performance hit when it searches for the second query ie where object_name
='emp';
2.
If we have a query like below.
select * from emp
where upper(ename) = upper(:p_ename);
Evenif we have the index on ename column, oracle wouldn't be able to use the index, as there is a function in the predicate column. If you need oracle to use the index, we need to create a function based index as below.
Create index idx_ename on emp(upper(ename));
Regards,
Cool -
I can successfully log into my you tube acct. on my PC, but the IPad youtube app will not recognize my login.
First, check the caps lock on your PC keyboard. I know this sounds a bit silly, but we've all done it. If it turns out caps lock was on, then just enter all caps on the iPad.
If that's not the problem, try opening Notes and type your password sonyouncan see it. If you're not getting what you expect, try slowing down.
Let me know how that goes, andvI'll try to come up with a few more troubleshooting options. -
Which app should we use view photos installed by the pen drive.?
which app shoul we use to view a photo installed by the pendrive?
Use Preview.
Hope that helps. -
I have deleted by accident the backup folder on an external HD.
I did the backup since I had to sent my macbook pro retina display to customer care.
By accident, I deleted the backup folder on my external HD.
Any advice on which app I can use/buy to recover the info?
Thanks in advance!
elmoven.- desperate trying to recover his Ph.D info from 3 yearsIT SOUNDS wiered but there is just for your pc just goto statrtup menu--->System tools -->system restore by Today's date and time
-
Have a AT&T iphone 4 and it will not let me login to the iPhone without a sims card and if you use a AT&T sims card it won't work
Define "won't work"...
You can not activate an iPhone without a SIM. If the phone is carrier locked, you must have a valid Sim from the correct carrier.
What EXACTLY is the message you're getting? -
Here are the things I will do with this laptop:
-Writing essays for college (which will be a lot)
-PowerPoints
-Personal Writing (Stories and things like that)
-Internet Surfing and Research (which means multiple tabs at a time)
-Watching Videos and Streaming Anime (DVDs, Hulu, Crunchyroll, etc)
-Downloads (PDFs)
-I don't play games.
So, with all of this in mind, what kind of specs and OS would be best? I will admit to not knowing a lot about computers and what's needed to do what I want, or much about the technicalities. I do know that I will be using 8gb of RAM, though I am not sure about HDD vs. SSD. I've basically been living off my iPad for Internet and stuff for the past two years and writing my papers at campus, but now that I'm going to be taking more English and writing-based classes, I'm going to need a laptop.There's only one non-Retina MacBook Pro being sold by Apple now - the 13" on the left of the Apple Store page for MBPs.
If I were you, I would look for a refurbished 2012 15" from Apple. You can add RAM and a SSD (should you choose) yourself.
Clinton -
Icon Preview in Finder Replace Application Icons, Which Apps Will Now Open?
If you're a graphic designer like myself who uses multiple image programs it was extremely easy to see which app was used for each file... A Photoshop document displayed the Photoshop icon, a Preview document displayed the Preview icon etc. etc.
... But now alI I see are tiny previews of every document, which may be great for certain circumstances, but now I have the problem of Select All and Open... but various apps open all at once if they related to multiple apps. If I knew which documents were opened by what it would help me to determine whether a quick snap at Command-A along with Command-O would suit me. Currently it now doesn't as I don't wish for perhaps more than one app to open, AND dragging to the dock and hovering to open an app is a pain, too.
So, any suggestions?I bet you're talking about column view. If you are, open a window in column view, select Show View Options (Command-J), and uncheck the box for icon preview.
There are different view options depending on whether you're in icon view, column view, list view, etc. Icon Preview is great in icon view, but not so useful in the other views. -
HT204053 Changed Apple ID names and no Apps will not use those changes
Hello
I was cleaning up a bunch of old history and renamed 4 of 5 apple accounts cleaning up family chaos over the last years. Now my Apps updates ask for old Apple IDs and will not use renamed ones for same accounts or old passwords. Please help.
ThanksI was cleaning up a bunch of old history and renamed 4 of 5 apple accounts cleaning up family chaos over the last years.
Please explain what that means. What was it that you actually did? It sounds more like you created new Apple IDs or something. What process did you use to change these names? Where did you find the instructions? -
which apps can i use
JR
No there isn't a list. Your MBP will run all Mac software. There is no software that is MBP specific. Visit Apple downloads to see software for Mac. Also do a Google search for Mac software/applications.
Joseph -
2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store? Is there a way to find out if the App will work before you download?
Look to the app developer to provide that information when browsing the iTunes Store.
The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
If you aren't happy then sell it and buy a new one. -
Which JRE will JWS use if Multiple JREs are installed
I have a situation for this Daylight Saving Time update that is comming. if the users already have 1.4.2_12 or any previous 1.4 JREs installed and the JNLP is set to look for <j2se version="1.4+"/>. If we install the 1.4.2_13 that has the fix for the DST, which runtime will JWS run the appliction on, the latest 1.4 or the oldest??
Sameer JafferHi,
it will run the latest JRE that is at least 1.4. If it finds a 1.6 it will even run this, because the version is higher than 1.4.
Bye Schippe
Maybe you are looking for
-
I have a 32 gb ipad air but need to get the songs I have stored in iTunes on my old iMac onto the ipad air or stored somewhere else. I have over 10000 songs on there which is 30.47 gb. far too much to put on my ipad air. How do I get them off my old
-
MSI 890GXM-G65 Zosma Core CPU 960T support
Hey guys, i picked up AMD Phenom x4 960T proccy - HD96ZTWFK4DGR ,ZOSMA core, was wondering if my board will support it. In the webpage of CPU support i see Phenom II X4 Zosma HD840TWFK4DGR 840T is supported. Please do let me know.
-
I have a powerbook g4 but it keeps shocking me. why is that?
I have a powerbook G4 15 inch 1.25 hertz (i believe) and when i sit it down somewhere like on my desk after a while it starts to shock me. It's not like just a little bit no a lot and it hurts a lot. What could be making it do that? i need it for wor
-
Hi, I want to know how to use the report S_ALR_87012167 - Accounts Receivable Information System report. I see there are different evaluation types etc. How do I create a variant with difft selections. I want this selection: customer number, accounti
-
Exceeded configured maximum number of allowed output prompts, sections, rows, or columns.
So, I am getting the above error message when trying to access one of the dashboard reports. I know there are some limitations on certain views. However, my boss is asking if I can find out how many rows I m trying to run before increasing number ro